(I'm not subscibed to isdn4linux ml so plese CC when replying)
Playing with linux kernel 2.6.0-test2 and 2.6.0-test3 I have a kernel freeze
trying to load isdn/hisax modules...
I don't know if this is a know problem so I report it :-)
MY HARDWARE: (lspci)
00:0d.0 Network controller: Cologne Chip Designs GmbH ISDN network controller
[HFC-PCI] (rev 02)
Subsystem: Cologne Chip Designs GmbH ISDN Board
Flags: bus master, medium devsel, latency 16, IRQ 5
I/O ports at 8800 [disabled] [size=8]
Memory at df800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 1
KERNEL CONFIG (2.6.0-test3):
#
# ISDN subsystem
#
CONFIG_ISDN_BOOL=y
#
# Old ISDN4Linux
#
CONFIG_ISDN=m
# CONFIG_ISDN_NET_SIMPLE is not set
# CONFIG_ISDN_NET_CISCO is not set
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_PPP_BSDCOMP=m
# CONFIG_ISDN_AUDIO is not set
#
# ISDN feature submodules
#
# CONFIG_ISDN_DRV_LOOP is not set
# CONFIG_ISDN_DIVERSION is not set
#
# CAPI subsystem
#
# CONFIG_ISDN_CAPI is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
# CONFIG_DE_AOC is not set
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
# CONFIG_HISAX_1TR6 is not set
# CONFIG_HISAX_NI1 is not set
CONFIG_HISAX_MAX_CARDS=1
#
# HiSax supported cards
#
# CONFIG_HISAX_16_3 is not set
# CONFIG_HISAX_TELESPCI is not set
# CONFIG_HISAX_S0BOX is not set
# CONFIG_HISAX_FRITZPCI is not set
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
# CONFIG_HISAX_DIEHLDIVA is not set
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_NETJET is not set
# CONFIG_HISAX_NETJET_U is not set
# CONFIG_HISAX_NICCY is not set
# CONFIG_HISAX_BKM_A4T is not set
# CONFIG_HISAX_SCT_QUADRO is not set
# CONFIG_HISAX_GAZEL is not set
CONFIG_HISAX_HFC_PCI=y
# CONFIG_HISAX_W6692 is not set
# CONFIG_HISAX_HFC_SX is not set
# CONFIG_HISAX_ENTERNOW_PCI is not set
# CONFIG_HISAX_DEBUG is not set
# CONFIG_HISAX_FRITZ_PCIPNP is not set
# CONFIG_HISAX_HFCPCI is not set
#
# Active cards
#
# CONFIG_ISDN_DRV_EICON is not set
# CONFIG_ISDN_DRV_TPAM is not set
# CONFIG_HYSDN is not set
Console's messages (copied by hand):
ISDN subsystem initialized
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.41.6.5
HiSax: Layer2 Revision 2.25.6.4
HiSax: TeiMgr Revision 2.17.6.3
HiSax: Layer3 Revision 2.17.6.5
HiSax: LinkLayer Revision 2.51.6.6
HiSax: Approval certification failed beacause of
HiSax: unathorized source code changes
get_drv 0: 0 -> 1
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: HFC-PCI driver Rev. 1.34.6.8
PCI: Found IRQ 5 for device 0000:00:0d.0
PCI: Sharing IRQ 5 with 0000:00:04.2
PCI: Sharing IRQ 5 with 0000:00:04.3
HiSax: HFC-PCI card manufacturer: CCD/Billion/Asuscom name: 2BD0
HiSax: HFC-PCI: defined at mem 0xc8914000 fifo 0xc4ec8000(0x4ec8000) IRQ 5
ChipID: 30
HFC_PCI: resetting card
HFC 2BDS0 PCI: IRQ 5 count 0
(KERNEL FREEZE / interrupts enabled)
Bye,
Paolo