Hi Linus,
the patch below against 2.6.0-test4 does the following:
- let more drivers that don't compile depend on BROKEN
- MTD_BLKMTD is fixed, remove the dependency on BROKEN
- let all drivers that don't compile on SMP (due to cli/sti usage)
depend on a BROKEN_ON_SMP that is only defined if !SMP || BROKEN
- #include interrupt.h for dummy cli/sti/... in two files to fix the
UP compilation of these files
I marked only drivers that are broken for a long time and where I don't
know about existing fixes with BROKEN or BROKEN_ON_SMP.
diffstat output:
drivers/atm/Kconfig | 2 +-
drivers/cdrom/Kconfig | 8 ++++----
drivers/char/Kconfig | 31 ++++++++++++++++---------------
drivers/char/epca.c | 1 +
drivers/char/generic_serial.c | 1 +
drivers/i2c/Kconfig | 2 +-
drivers/isdn/Kconfig | 2 +-
drivers/isdn/hardware/avm/Kconfig | 12 ++++++------
drivers/isdn/i4l/Kconfig | 1 +
drivers/media/video/Kconfig | 2 +-
drivers/mtd/devices/Kconfig | 2 +-
drivers/net/Kconfig | 8 ++++----
drivers/net/hamradio/Kconfig | 6 +++---
drivers/net/irda/Kconfig | 2 +-
drivers/net/tulip/Kconfig | 2 +-
drivers/net/wan/Kconfig | 8 ++++----
drivers/scsi/Kconfig | 16 ++++++++--------
drivers/video/Kconfig | 6 +++---
init/Kconfig | 5 +++++
19 files changed, 63 insertions(+), 54 deletions(-)
Please apply
Adrian
--- linux-2.6.0-test4-not-full/drivers/media/video/Kconfig.old 2003-08-24 10:26:27.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/media/video/Kconfig 2003-08-24 10:26:51.000000000 +0200
@@ -201,7 +201,7 @@
config VIDEO_ZR36120
tristate "Zoran ZR36120/36125 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && BROKEN
help
Support for ZR36120/ZR36125 based frame grabber/overlay boards.
This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
--- linux-2.6.0-test4-not-full/drivers/net/tulip/Kconfig.old 2003-08-25 14:53:47.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/net/tulip/Kconfig 2003-08-25 14:54:02.000000000 +0200
@@ -129,7 +129,7 @@
config PCMCIA_XIRTULIP
tristate "Xircom Tulip-like CardBus support (old driver)"
- depends on NET_TULIP && CARDBUS
+ depends on NET_TULIP && CARDBUS && BROKEN_ON_SMP
---help---
This driver is for the Digital "Tulip" Ethernet CardBus adapters.
It should work with most DEC 21*4*-based chips/ethercards, as well
--- linux-2.6.0-test4-not-full/drivers/net/irda/Kconfig.old 2003-08-25 14:52:55.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/net/irda/Kconfig 2003-08-25 14:53:24.000000000 +0200
@@ -256,7 +256,7 @@
config TOSHIBA_OLD
tristate "Toshiba Type-O IR Port (old driver)"
- depends on IRDA
+ depends on IRDA && BROKEN_ON_SMP
help
Say Y here if you want to build support for the Toshiba Type-O IR
chipset. This chipset is used by the Toshiba Libretto 100CT, and
--- linux-2.6.0-test4-not-full/drivers/net/hamradio/Kconfig.old 2003-08-25 14:51:39.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/net/hamradio/Kconfig 2003-08-25 14:52:13.000000000 +0200
@@ -1,6 +1,6 @@
config MKISS
tristate "Serial port KISS driver"
- depends on AX25
+ depends on AX25 && BROKEN_ON_SMP
---help---
KISS is a protocol used for the exchange of data between a computer
and a Terminal Node Controller (a small embedded system commonly
@@ -19,7 +19,7 @@
config 6PACK
tristate "Serial port 6PACK driver"
- depends on AX25
+ depends on AX25 && BROKEN_ON_SMP
---help---
6pack is a transmission protocol for the data exchange between your
PC and your TNC (the Terminal Node Controller acts as a kind of
@@ -49,7 +49,7 @@
config DMASCC
tristate "High-speed (DMA) SCC driver for AX.25"
- depends on ISA && AX25
+ depends on ISA && AX25 && BROKEN_ON_SMP
---help---
This is a driver for high-speed SCC boards, i.e. those supporting
DMA on one port. You usually use those boards to connect your
--- linux-2.6.0-test4-not-full/drivers/net/Kconfig.old 2003-08-24 11:06:46.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/net/Kconfig 2003-08-26 20:56:08.000000000 +0200
@@ -704,7 +704,7 @@
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
- depends on NET_VENDOR_3COM && MCA && EXPERIMENTAL
+ depends on NET_VENDOR_3COM && MCA && EXPERIMENTAL && BROKEN_ON_SMP
help
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -882,7 +882,7 @@
config NI5010
tristate "NI5010 support (EXPERIMENTAL)"
- depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL
+ depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
@@ -1221,7 +1221,7 @@
config SKMC
tristate "SKnet MCA support"
- depends on NET_ETHERNET && MCA
+ depends on NET_ETHERNET && MCA && BROKEN
---help---
These are Micro Channel Ethernet adapters. You need to say Y to "MCA
support" in order to use this driver. Supported cards are the SKnet
@@ -2670,7 +2670,7 @@
config IPHASE5526
tristate "Interphase 5526 Tachyon chipset based adapter support"
- depends on NET_FC && SCSI && PCI
+ depends on NET_FC && SCSI && PCI && BROKEN
help
Say Y here if you have a Fibre Channel adaptor of this kind.
--- linux-2.6.0-test4-not-full/drivers/i2c/Kconfig.old 2003-08-26 20:58:13.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/i2c/Kconfig 2003-08-26 20:58:28.000000000 +0200
@@ -150,7 +150,7 @@
config I2C_ELEKTOR
tristate "Elektor ISA card"
- depends on I2C_ALGOPCF
+ depends on I2C_ALGOPCF && BROKEN_ON_SMP
help
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
such an adapter.
--- linux-2.6.0-test4-not-full/drivers/video/Kconfig.old 2003-08-24 14:51:48.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/video/Kconfig 2003-08-24 15:05:48.000000000 +0200
@@ -40,7 +40,7 @@
config FB_CIRRUS
tristate "Cirrus Logic support"
- depends on FB && (AMIGA || PCI)
+ depends on FB && (AMIGA || PCI) && BROKEN
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -55,7 +55,7 @@
config FB_PM2
tristate "Permedia2 support"
- depends on FB && (AMIGA || PCI)
+ depends on FB && (AMIGA || PCI) && BROKEN
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
@@ -802,7 +802,7 @@
config FB_PM3
tristate "Permedia3 support"
- depends on FB && PCI
+ depends on FB && PCI && BROKEN
help
This is the frame buffer device driver for the 3DLabs Permedia3
chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
--- linux-2.6.0-test4-not-full/drivers/isdn/hardware/avm/Kconfig.old 2003-08-25 16:14:34.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/isdn/hardware/avm/Kconfig 2003-08-25 16:15:22.000000000 +0200
@@ -12,13 +12,13 @@
config ISDN_DRV_AVMB1_B1ISA
tristate "AVM B1 ISA support"
- depends on CAPI_AVM && ISDN_CAPI && ISA
+ depends on CAPI_AVM && ISDN_CAPI && ISA && BROKEN_ON_SMP
help
Enable support for the ISA version of the AVM B1 card.
config ISDN_DRV_AVMB1_B1PCI
tristate "AVM B1 PCI support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP
help
Enable support for the PCI version of the AVM B1 card.
@@ -30,14 +30,14 @@
config ISDN_DRV_AVMB1_T1ISA
tristate "AVM T1/T1-B ISA support"
- depends on CAPI_AVM && ISDN_CAPI && ISA
+ depends on CAPI_AVM && ISDN_CAPI && ISA && BROKEN_ON_SMP
help
Enable support for the AVM T1 T1B card.
Note: This is a PRI card and handle 30 B-channels.
config ISDN_DRV_AVMB1_B1PCMCIA
tristate "AVM B1/M1/M2 PCMCIA support"
- depends on CAPI_AVM && ISDN_CAPI
+ depends on CAPI_AVM && ISDN_CAPI && BROKEN_ON_SMP
help
Enable support for the PCMCIA version of the AVM B1 card.
@@ -50,14 +50,14 @@
config ISDN_DRV_AVMB1_T1PCI
tristate "AVM T1/T1-B PCI support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP
help
Enable support for the AVM T1 T1B card.
Note: This is a PRI card and handle 30 B-channels.
config ISDN_DRV_AVMB1_C4
tristate "AVM C4/C2 support"
- depends on CAPI_AVM && ISDN_CAPI && PCI
+ depends on CAPI_AVM && ISDN_CAPI && PCI && BROKEN_ON_SMP
help
Enable support for the AVM C4/C2 PCI cards.
These cards handle 4/2 BRI ISDN lines (8/4 channels).
--- linux-2.6.0-test4-not-full/drivers/isdn/i4l/Kconfig.old 2003-08-24 09:59:16.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/isdn/i4l/Kconfig 2003-08-24 09:59:46.000000000 +0200
@@ -106,6 +106,7 @@
config ISDN_DIVERSION
tristate "Support isdn diversion services"
+ depends on BROKEN
help
This option allows you to use some supplementary diversion
services in conjunction with the HiSax driver on an EURO/DSS1
--- linux-2.6.0-test4-not-full/drivers/isdn/Kconfig.old 2003-08-25 14:49:14.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/isdn/Kconfig 2003-08-25 14:49:31.000000000 +0200
@@ -22,7 +22,7 @@
menu "Old ISDN4Linux"
- depends on NET && ISDN_BOOL
+ depends on NET && ISDN_BOOL && BROKEN_ON_SMP
config ISDN
tristate "Old ISDN4Linux (obsolete)"
--- linux-2.6.0-test4-not-full/drivers/char/Kconfig.old 2003-08-25 15:16:32.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/char/Kconfig 2003-08-25 15:51:41.000000000 +0200
@@ -80,7 +80,7 @@
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
@@ -113,7 +113,7 @@
config CYCLADES
tristate "Cyclades async mux support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
---help---
This is a driver for a card that gives you many serial ports. You
would need something like this to connect more than two modems to
@@ -145,7 +145,7 @@
config DIGIEPCA
tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
---help---
This is a driver for Digi International's Xx, Xeve, and Xem series
of cards which provide multiple serial ports. You would need
@@ -164,7 +164,7 @@
config DIGI
tristate "Digiboard PC/Xx Support"
- depends on SERIAL_NONSTANDARD && DIGIEPCA=n
+ depends on SERIAL_NONSTANDARD && DIGIEPCA=n && BROKEN_ON_SMP
help
This is a driver for the Digiboard PC/Xe, PC/Xi, and PC/Xeve cards
that give you many serial ports. You would need something like this
@@ -177,7 +177,7 @@
config ESPSERIAL
tristate "Hayes ESP serial port support"
- depends on SERIAL_NONSTANDARD && ISA
+ depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP
help
This is a driver which supports Hayes ESP serial ports. Both single
port cards and multiport cards are supported. Make sure to read
@@ -190,7 +190,7 @@
config MOXA_INTELLIO
tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
Say Y here if you have a Moxa Intellio multiport serial card.
@@ -201,7 +201,7 @@
config MOXA_SMARTIO
tristate "Moxa SmartIO support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
Say Y here if you have a Moxa SmartIO multiport serial card.
@@ -262,7 +262,7 @@
config RISCOM8
tristate "SDL RISCom/8 card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
This is a driver for the SDL Communications RISCom/8 multiport card,
which gives you many serial ports. You would need something like
@@ -275,7 +275,7 @@
config SPECIALIX
tristate "Specialix IO8+ card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
This is a driver for the Specialix IO8+ multiport card (both the
ISA and the PCI version) which gives you many serial ports. You
@@ -299,7 +299,7 @@
config SX
tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
This is a driver for the SX and SI multiport serial cards.
Please read the file <file:Documentation/sx.txt> for details.
@@ -310,7 +310,7 @@
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
@@ -339,7 +339,7 @@
config STALLION
tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV
+ depends on STALDRV && BROKEN_ON_SMP
help
If you have an EasyIO or EasyConnection 8/32 multiport Stallion
card, then this is for you; say Y. Make sure to read
@@ -352,7 +352,7 @@
config ISTALLION
tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV
+ depends on STALDRV && BROKEN
help
If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
serial multiport card, say Y here. Make sure to read
@@ -365,7 +365,7 @@
config SERIAL_TX3912
bool "TMPTX3912/PR31700 serial port support"
- depends on SERIAL_NONSTANDARD && MIPS
+ depends on SERIAL_NONSTANDARD && MIPS && BROKEN_ON_SMP
help
The TX3912 is a Toshiba RISC processor based o the MIPS 3900 core;
see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
@@ -425,7 +425,7 @@
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ZORRO
+ depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
---help---
This option supports the 2232 7-port serial card shipped with the
Amiga 2000 and other Zorro-bus machines, dating from 1989. At
@@ -909,6 +909,7 @@
config FTAPE
tristate "Ftape (QIC-80/Travan) support"
+ depends on BROKEN_ON_SMP
---help---
If you have a tape drive that is connected to your floppy
controller, say Y here.
--- linux-2.6.0-test4-not-full/drivers/scsi/Kconfig.old 2003-08-24 11:11:38.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/scsi/Kconfig 2003-08-26 20:57:18.000000000 +0200
@@ -355,7 +355,7 @@
# All the I2O code and drivers do not seem to be 64bit safe.
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
- depends on !X86_64 && SCSI
+ depends on !X86_64 && SCSI && BROKEN
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
@@ -398,7 +398,7 @@
# does not use pci dma and seems to be onboard only for old machines
config SCSI_AM53C974
tristate "AM53/79C974 PCI SCSI support"
- depends on X86 && PCI && SCSI
+ depends on X86 && PCI && SCSI && BROKEN
---help---
This is support for the AM53/79C974 SCSI host adapters. Please read
<file:Documentation/scsi/AM53C974.txt> for details. Also, the
@@ -742,7 +742,7 @@
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -1161,7 +1161,7 @@
config SCSI_MCA_53C9X
tristate "NCR MCA 53C9x SCSI support"
- depends on MCA && SCSI
+ depends on MCA && SCSI && BROKEN_ON_SMP
help
Some MicroChannel machines, notably the NCR 35xx line, use a SCSI
controller based on the NCR 53C94. This driver will allow use of
@@ -1189,7 +1189,7 @@
config SCSI_PCI2000
tristate "PCI2000 support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
This is support for the PCI2000I EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1202,7 +1202,7 @@
config SCSI_PCI2220I
tristate "PCI2220i support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
help
This is support for the PCI2220i EIDE interface card which acts as a
SCSI host adapter. Please read the SCSI-HOWTO, available from
@@ -1314,7 +1314,7 @@
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
- depends on X86 && ISA && SCSI
+ depends on X86 && ISA && SCSI && BROKEN
---help---
These are 8-bit SCSI controllers; the ST-01 is also supported by
this driver. It is explained in section 3.9 of the SCSI-HOWTO,
@@ -1381,7 +1381,7 @@
config SCSI_DC390T
tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
- depends on PCI && SCSI
+ depends on PCI && SCSI && BROKEN
---help---
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
--- linux-2.6.0-test4-not-full/drivers/mtd/devices/Kconfig.old 2003-08-24 12:43:08.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/mtd/devices/Kconfig 2003-08-24 12:43:25.000000000 +0200
@@ -102,7 +102,7 @@
config MTD_BLKMTD
tristate "MTD emulation using block device"
- depends on MTD && BROKEN
+ depends on MTD
help
This driver allows a block device to appear as an MTD. It would
generally be used in the following cases:
--- linux-2.6.0-test4-not-full/drivers/atm/Kconfig.old 2003-08-25 15:03:40.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/atm/Kconfig 2003-08-25 15:04:02.000000000 +0200
@@ -241,7 +241,7 @@
config ATM_AMBASSADOR
tristate "Madge Ambassador (Collage PCI 155 Server)"
- depends on PCI && ATM
+ depends on PCI && ATM && BROKEN_ON_SMP
help
This is a driver for ATMizer based ATM card produced by Madge
Networks Ltd. Say Y (or M to compile as a module named ambassador)
--- linux-2.6.0-test4-not-full/drivers/cdrom/Kconfig.old 2003-08-25 15:11:35.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/cdrom/Kconfig 2003-08-25 15:13:29.000000000 +0200
@@ -74,7 +74,7 @@
config SBPCD
tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
- depends on CD_NO_IDESCSI
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
This driver supports most of the drives which use the Panasonic or
Sound Blaster interface. Please read the file
@@ -199,7 +199,7 @@
config CM206
tristate "Philips/LMS CM206 CDROM support"
- depends on CD_NO_IDESCSI
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
If you have a Philips/LMS CD-ROM drive cm206 in combination with a
cm260 host adapter card, say Y here. Please also read the file
@@ -245,7 +245,7 @@
config CDU31A
tristate "Sony CDU31A/CDU33A CDROM support"
- depends on CD_NO_IDESCSI
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
These CD-ROM drives have a spring-pop-out caddyless drawer, and a
rectangular green LED centered beneath it. NOTE: these CD-ROM
@@ -267,7 +267,7 @@
config CDU535
tristate "Sony CDU535 CDROM support"
- depends on CD_NO_IDESCSI
+ depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
drives. Please read the file <file:Documentation/cdrom/sonycd535>.
--- linux-2.6.0-test4-not-full/init/Kconfig.old 2003-08-25 14:49:54.000000000 +0200
+++ linux-2.6.0-test4-not-full/init/Kconfig 2003-08-25 14:50:22.000000000 +0200
@@ -43,6 +43,11 @@
If unsure, say N.
+config BROKEN_ON_SMP
+ bool
+ depends on BROKEN || !SMP
+ default y
+
endmenu
--- linux-2.6.0-test4-not-full/drivers/char/epca.c.old 2003-09-01 01:01:25.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/char/epca.c 2003-09-01 01:01:49.000000000 +0200
@@ -40,6 +40,7 @@
#include <linux/tty_flip.h>
#include <linux/slab.h>
#include <linux/ioport.h>
+#include <linux/interrupt.h>
#include <asm/uaccess.h>
#include <asm/io.h>
--- linux-2.6.0-test4-not-full/drivers/char/generic_serial.c.old 2003-09-01 01:09:06.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/char/generic_serial.c 2003-09-01 01:09:23.000000000 +0200
@@ -25,6 +25,7 @@
#include <linux/serial.h>
#include <linux/mm.h>
#include <linux/generic_serial.h>
+#include <linux/interrupt.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
--- linux-2.6.0-test4-not-full/drivers/net/wan/Kconfig.old 2003-09-02 17:24:42.000000000 +0200
+++ linux-2.6.0-test4-not-full/drivers/net/wan/Kconfig 2003-09-02 17:24:53.000000000 +0200
@@ -35,7 +35,7 @@
# The COSA/SRP driver has not been tested as non-modular yet.
config COSA
tristate "COSA/SRP sync serial boards support"
- depends on WAN && ISA && m
+ depends on WAN && ISA && m && BROKEN
---help---
This is a driver for COSA and SRP synchronous serial boards. These
boards allow to connect synchronous serial devices (for example
@@ -63,7 +63,7 @@
# Not updated to 2.6.
config COMX
tristate "MultiGate (COMX) synchronous serial boards support"
- depends on WAN && (ISA || PCI) && OBSOLETE
+ depends on WAN && (ISA || PCI) && BROKEN
---help---
Say Y if you want to use any board from the MultiGate (COMX) family.
These boards are synchronous serial adapters for the PC,
@@ -465,7 +465,7 @@
config SDLA
tristate "SDLA (Sangoma S502/S508) support"
- depends on DLCI && ISA
+ depends on DLCI && ISA && BROKEN_ON_SMP
help
Say Y here if you need a driver for the Sangoma S502A, S502E, and
S508 Frame Relay Access Devices. These are multi-protocol cards, but
@@ -498,7 +498,7 @@
config VENDOR_SANGOMA
tristate "Sangoma WANPIPE(tm) multiprotocol cards"
- depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA)
+ depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA) && BROKEN
---help---
WANPIPE from Sangoma Technologies Inc. (<http://www.sangoma.com/>)
is a family of intelligent multiprotocol WAN adapters with data
In article <[email protected]>,
Adrian Bunk <[email protected]> wrote:
| Hi Linus,
|
| the patch below against 2.6.0-test4 does the following:
|
| - let more drivers that don't compile depend on BROKEN
| - MTD_BLKMTD is fixed, remove the dependency on BROKEN
| - let all drivers that don't compile on SMP (due to cli/sti usage)
| depend on a BROKEN_ON_SMP that is only defined if !SMP || BROKEN
| - #include interrupt.h for dummy cli/sti/... in two files to fix the
| UP compilation of these files
|
| I marked only drivers that are broken for a long time and where I don't
| know about existing fixes with BROKEN or BROKEN_ON_SMP.
Thanks! This makes testing far easier.
--
bill davidsen <[email protected]>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.