Happy new year!
I finally decided to jump onto the 2.6 wagon, but unfortunately compilation
failed:
LD init/built-in.o
LD .tmp_vmlinux1
init/built-in.o(.text+0x708): In function `huft_build':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0xa08): In function `huft_free':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0xf10): In function `inflate_codes':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0xf7c): In function `inflate_codes':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0xf84): In function `inflate_codes':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0xf8c): In function `inflate_codes':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0xf94): In function `inflate_codes':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0xfe8): In function `inflate_codes':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0xff0): In function `inflate_codes':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0x1000): In function `inflate_codes':
: relocation truncated to fit: BRADDR .init.text
init/built-in.o(.text+0x1220): In function `inflate_stored':
: additional relocation overflows omitted from the output
local symbol 0: discarded in section `.exit.text' from drivers/built-in.o
local symbol 1: discarded in section `.exit.text' from drivers/built-in.o
make: *** [.tmp_vmlinux1] Error 1
ds20:/usr/src/linux-2.6.1-rc1#
This is an dual-alpha ev6 box (compaq DS20),
gcc version 3.3,
GNU ld version 2.14.90.0.7 20031029
I found thread about a similar problem in the archive
<http://lkml.org/lkml/2003/9/3/149> but the topic didn't seem to be
resolved there.
any thoughts?
Thorsten
--
| Thorsten Kranzkowski Internet: [email protected] |
| Mobile: ++49 170 1876134 Snail: Kiebitzstr. 14, 49324 Melle, Germany |
| Ampr: dl8bcu@db0lj.#rpl.deu.eu, [email protected] [44.130.8.19] |