http://bugme.osdl.org/show_bug.cgi?id=1806
Summary: disks stats not kept for DM (device mapper) devices
Kernel Version: 2.6.0
Status: NEW
Severity: normal
Owner: [email protected]
Submitter: [email protected]
Distribution:all
Hardware Environment:all
Software Environment:all
Problem Description:
Disk stats as reported through sysfs are empty for all DM (device mapper)
devices. This appears to be due to the fact that the stats are traced via
request structs which are not generated until below the device mapper layer. It
seems it would be possible to add code to device mapper to track the stats since
the actual location of the stats is in the gendisk entry which does exsist for
DM deivices. Only problem I see is in tracking ticks for IO since in the non DM
case this is done by storing a start time in the request struct on driving the
request. Since DM has no request struct (only the BIO) it has no place to
record the start time.
Steps to reproduce:
create a DM device using dmsetup, lvm2 or EVMS. Do IO to device, look at
/sys/block/dm-xxx/stat.
> http://bugme.osdl.org/show_bug.cgi?id=1806
>
> Summary: disks stats not kept for DM (device mapper) devices
> Kernel Version: 2.6.0
> Status: NEW
> Severity: normal
> Owner: [email protected]
> Submitter: [email protected]
>
>
> Distribution:all
> Hardware Environment:all
> Software Environment:all
> Problem Description:
> Disk stats as reported through sysfs are empty for all DM (device mapper)
> devices. This appears to be due to the fact that the stats are traced via
> request structs which are not generated until below the device mapper
> layer. It seems it would be possible to add code to device mapper to track
> the stats since the actual location of the stats is in the gendisk entry
> which does exsist for DM deivices. Only problem I see is in tracking ticks
> for IO since in the non DM case this is done by storing a start time in the
> request struct on driving the request. Since DM has no request struct
> (only the BIO) it has no place to record the start time.
>
> Steps to reproduce:
> create a DM device using dmsetup, lvm2 or EVMS. Do IO to device, look at
> /sys/block/dm-xxx/stat.
Steve and I noticed this behavior this morning. I poked around in ll_rw_blk.c
and genhd.[ch] and some of the individual block drivers to get an idea for
how I/O statistics are managed. I eventually came up with this patch for
Device-Mapper.
Some things to note:
- In the lower-level drivers (IDE, SCIS, etc), statistics are calculated based
on request structs. DM never uses/sees request structs, so these statistics
are based on bio structs. Meaning...a "reads" count of 1 means DM completed 1
bio, not 1 request.
- The statistics calculations are done when a bio is completed. As some brief
background, when DM receives a bio, it holds on to that bio, and creates one
or more clones (in case the original bio needs to be split across some
internal DM boundary). DM manually submits each of those clones, and when all
clones complete, DM completes the original bio. I've added the statistics
calculations at this completion point. It could just as easily be done before
the clones are submitted. I'm not sure if this is the desired behavior, but
it seemed to be based on examining the other places where the statistics are
updated. One side-effect of this decision is that an I/O that causes an error
within DM may not show up at all in the statistics. E.g., if the DM device
currently has no active mapping, DM will simply call bio_io_error() on that
bio and thus never update the stats for the device - which may actually be
the desired behavior.
- Device-Mapper doesn't do much of anything with the request_queue struct
that's attached to its gendisk entry. However, all of the code that updates
the I/O stats has comments that say the request_queue must be locked before
the stats can be updated. So this patch allocates a spinlock for each DM
request_queue, and this lock is taken while updating the stats. This
introduces some new contention on DM's I/O completion path. I don't know yet
whether it will be a significant amount.
I'm not sure if this is the best way to do this, but it's probably the
simplest. On a related note, MD/Software-RAID also doesn't currently track
I/O statistics. If we decide if/how to track statistics for DM, doing the
same in MD ought to be pretty easy.
This patch is against 2.6.1-rc2. I also have a slightly different version for
Joe's 2.6.0-udm3 patchset.
--
Kevin Corry
[email protected]
http://evms.sourceforge.net/
Update I/O statistics before completing the original, incoming bio.
--- a/drivers/md/dm.c 2004-01-07 13:53:55.000000000 -0600
+++ b/drivers/md/dm.c 2004-01-07 13:59:30.000000000 -0600
@@ -25,6 +25,7 @@
int error;
struct bio *bio;
atomic_t io_count;
+ unsigned long start_time;
};
struct deferred_io {
@@ -44,7 +45,7 @@
unsigned long flags;
- request_queue_t *queue;
+ struct request_queue *queue;
struct gendisk *disk;
/*
@@ -243,6 +244,29 @@
return sector << SECTOR_SHIFT;
}
+static inline void update_io_stats(struct dm_io *io)
+{
+ unsigned long flags;
+ unsigned long duration = jiffies - io->start_time;
+
+ spin_lock_irqsave(io->md->queue->queue_lock, flags);
+
+ switch (bio_data_dir(io->bio)) {
+ case READ:
+ disk_stat_inc(dm_disk(io->md), reads);
+ disk_stat_add(dm_disk(io->md), read_sectors, bio_sectors(io->bio));
+ disk_stat_add(dm_disk(io->md), read_ticks, duration);
+ break;
+ case WRITE:
+ disk_stat_inc(dm_disk(io->md), writes);
+ disk_stat_add(dm_disk(io->md), write_sectors, bio_sectors(io->bio));
+ disk_stat_add(dm_disk(io->md), write_ticks, duration);
+ break;
+ }
+
+ spin_unlock_irqrestore(io->md->queue->queue_lock, flags);
+}
+
/*
* Decrements the number of outstanding ios that a bio has been
* cloned into, completing the original io if necc.
@@ -259,6 +283,8 @@
}
if (atomic_dec_and_test(&io->io_count)) {
+ update_io_stats(io);
+
if (atomic_dec_and_test(&io->md->pending))
/* nudge anyone waiting on suspend queue */
wake_up(&io->md->wait);
@@ -462,6 +488,7 @@
atomic_set(&ci.io->io_count, 1);
ci.io->bio = bio;
ci.io->md = md;
+ ci.io->start_time = jiffies;
ci.sector = bio->bi_sector;
ci.sector_count = bio_sectors(bio);
ci.idx = bio->bi_idx;
@@ -607,6 +634,14 @@
return NULL;
}
+ md->queue->queue_lock = kmalloc(sizeof(spinlock_t), GFP_KERNEL);
+ if (!md->queue->queue_lock) {
+ free_minor(minor);
+ blk_put_queue(md->queue);
+ kfree(md);
+ return NULL;
+ }
+
md->queue->queuedata = md;
blk_queue_make_request(md->queue, dm_request);
@@ -614,6 +649,7 @@
mempool_free_slab, _io_cache);
if (!md->io_pool) {
free_minor(minor);
+ kfree(md->queue->queue_lock);
blk_put_queue(md->queue);
kfree(md);
return NULL;
@@ -623,6 +659,7 @@
if (!md->disk) {
mempool_destroy(md->io_pool);
free_minor(minor);
+ kfree(md->queue->queue_lock);
blk_put_queue(md->queue);
kfree(md);
return NULL;
@@ -649,6 +686,7 @@
mempool_destroy(md->io_pool);
del_gendisk(md->disk);
put_disk(md->disk);
+ kfree(md->queue->queue_lock);
blk_put_queue(md->queue);
kfree(md);
}