Hi there,
System is a Thinkpad X31, Pentium-M with 512MB RAM.
Today I pulled the latest change-sets from
http://linux.bkbits.net:8080/linux-2.5 and
http://linux-acpi.bkbits.net:8080/linux-acpi-test-2.6.1 and built that
kernel. (.config available on request).
This kernel does boot, ish... It gets as far as loading the ACPI modules
towards the end of the boot procedure, then locks the machine up
completely. Alt+SysRq+{s,u}, does not work, Alt+SysRq+b does reboot the
box, so not a complete hard hang with loss of interrupts etc.
There is no debug output as the machine hangs so suddenly. Side effect
of this hang is that the /var filesystem, reiserfs, gets halfly hosed.
Ordinary fsck fails and I get dropped to a shell to fix it manually. I
am using LVM2 and device-mapper for the filesystems, and my compiled
2.6.0 kernel still works, so I will use that for the time being.
If there is any patches for ACPI, I will happily try them.
Cheers,
--
Anders Karlsson <[email protected]>
Trudheim Technology Limited
On Mon, Jan 19, 2004 at 03:41:27PM +0000, Anders Karlsson wrote:
> Today I pulled the latest change-sets from
> http://linux.bkbits.net:8080/linux-2.5 and
> http://linux-acpi.bkbits.net:8080/linux-acpi-test-2.6.1 and built that
> kernel. (.config available on request).
Does the acpi in stock 2.6 work on your laptop?
On Mon, 2004-01-19 at 15:58, Mike Fedyk wrote:
> On Mon, Jan 19, 2004 at 03:41:27PM +0000, Anders Karlsson wrote:
> > Today I pulled the latest change-sets from
> > http://linux.bkbits.net:8080/linux-2.5 and
> > http://linux-acpi.bkbits.net:8080/linux-acpi-test-2.6.1 and built that
> > kernel. (.config available on request).
>
> Does the acpi in stock 2.6 work on your laptop?
In 2.6.0 it does, yes. Will bk export the 2.6.1 baseline and build today
and test that. Will write again when done.
Rgds,
--
Anders Karlsson <[email protected]>
Trudheim Technology Limited
On Mon, 2004-01-19 at 15:58, Mike Fedyk wrote:
> On Mon, Jan 19, 2004 at 03:41:27PM +0000, Anders Karlsson wrote:
> > Today I pulled the latest change-sets from
> > http://linux.bkbits.net:8080/linux-2.5 and
> > http://linux-acpi.bkbits.net:8080/linux-acpi-test-2.6.1 and built that
> > kernel. (.config available on request).
>
> Does the acpi in stock 2.6 work on your laptop?
Hi there,
I am now running the stock 2.6.1 kernel, still extracted from the
bitkeeper repository though. Not a problem, ACPI and the whole lot is
working fine.
So there must be something in the changes made between 2.6.1 and
yesterday.
HTH,
--
Anders Karlsson <[email protected]>
Trudheim Technology Limited
On Tue, Jan 20, 2004 at 02:46:16PM +0000, Anders Karlsson wrote:
> On Mon, 2004-01-19 at 15:58, Mike Fedyk wrote:
> > On Mon, Jan 19, 2004 at 03:41:27PM +0000, Anders Karlsson wrote:
> > > Today I pulled the latest change-sets from
> > > http://linux.bkbits.net:8080/linux-2.5 and
> > > http://linux-acpi.bkbits.net:8080/linux-acpi-test-2.6.1 and built that
> > > kernel. (.config available on request).
> >
> > Does the acpi in stock 2.6 work on your laptop?
>
> Hi there,
>
> I am now running the stock 2.6.1 kernel, still extracted from the
> bitkeeper repository though. Not a problem, ACPI and the whole lot is
> working fine.
> So there must be something in the changes made between 2.6.1 and
> yesterday.
Is that the taged 2.6.1 release, or does it have patches integrated after
that tag?
Try with a tarbal from kernel.org instead.
On Tue, 2004-01-20 at 18:12, Mike Fedyk wrote:
> Is that the taged 2.6.1 release, or does it have patches integrated after
> that tag?
That is the tagged 2.6.1 release. I looked at what change set
(1.1474.2.29) the Makefile was in when the change from 2.6.1-rc3 to
2.6.1 took place, and exported that. I could take a kernel.org tarball,
but the result will probably be exactly the same.
2.6.1 works.
2.6.1 + bk changes from
http://linux-acpi.bkbits.net:8080/linux-acpi-test-2.6.1 and
http://linux.bkbits.net:8080/linux-2.5 up until Monday 19th at about
12:00 GMT does not.
Boot params, configuration, everything as similar as can be.
> Try with a tarbal from kernel.org instead.
Will do that in the morning. Almost bed-time here. :)
Regards,
--
Anders Karlsson <[email protected]>
Trudheim Technology Limited