CC: Greg KH <[email protected]>
- Remove saved_command_line (and saving of the command line).
- Call parse_early_options
- Convert mem=, memmap=, acpi=, noapic, highmem=, apic=,
and pci= to __early_param (Greg, is this OK? It looks like it after
a quick skim).
---
linux-2.6-early_setup-trini/arch/i386/kernel/setup.c | 257 +++++--------
linux-2.6-early_setup-trini/arch/i386/kernel/vmlinux.lds.S | 3
linux-2.6-early_setup-trini/arch/i386/mach-generic/probe.c | 53 +-
linux-2.6-early_setup-trini/drivers/pci/pci.c | 2
4 files changed, 149 insertions(+), 166 deletions(-)
diff -puN arch/i386/kernel/setup.c~i386 arch/i386/kernel/setup.c
--- linux-2.6-early_setup/arch/i386/kernel/setup.c~i386 2004-03-24 16:15:04.953072474 -0700
+++ linux-2.6-early_setup-trini/arch/i386/kernel/setup.c 2004-03-24 16:15:04.962070448 -0700
@@ -127,9 +127,6 @@ unsigned long saved_videomode;
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
-static char command_line[COMMAND_LINE_SIZE];
- char saved_command_line[COMMAND_LINE_SIZE];
-
unsigned char __initdata boot_params[PARAM_SIZE];
static struct resource code_resource = { "Kernel code", 0x100000, 0 };
@@ -485,140 +482,136 @@ static void __init setup_memory_region(v
} /* setup_memory_region */
-static void __init parse_cmdline_early (char ** cmdline_p)
+/*
+ * "mem=nopentium" disables the 4MB page tables.
+ * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+ * to <mem>, overriding the bios size.
+ *
+ * HPA tells me bootloaders need to parse mem=, so no new
+ * option should be mem= [also see Documentation/i386/boot.txt]
+ */
+static int __init early_mem(char *from)
{
- char c = ' ', *to = command_line, *from = saved_command_line;
- int len = 0;
- int userdef = 0;
+ if (!memcmp(from, "nopentium", 9)) {
+ clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+ disable_pse = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
+ */
+ unsigned long long mem_size;
- /* Save unparsed command line copy for /proc/cmdline */
- saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+ mem_size = memparse(from, &from);
+ limit_regions(mem_size);
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ print_memory_map("user");
+ }
- for (;;) {
- /*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem= [also see Documentation/i386/boot.txt]
- */
- if (c == ' ' && !memcmp(from, "mem=", 4)) {
- if (to != command_line)
- to--;
- if (!memcmp(from+4, "nopentium", 9)) {
- from += 9+4;
- clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
- disable_pse = 1;
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long mem_size;
-
- mem_size = memparse(from+4, &from);
- limit_regions(mem_size);
- userdef=1;
- }
- }
+ return 0;
+}
+__early_param("mem=", early_mem);
- if (c == ' ' && !memcmp(from, "memmap=", 7)) {
- if (to != command_line)
- to--;
- if (!memcmp(from+7, "exactmap", 8)) {
- from += 8+7;
- e820.nr_map = 0;
- userdef = 1;
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long start_at, mem_size;
-
- mem_size = memparse(from+7, &from);
- if (*from == '@') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_RAM);
- } else if (*from == '#') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_ACPI);
- } else if (*from == '$') {
- start_at = memparse(from+1, &from);
- add_memory_region(start_at, mem_size, E820_RESERVED);
- } else {
- limit_regions(mem_size);
- userdef=1;
- }
- }
- }
+/*
+ * "memmap=XXX[KkmM][@#$]XXX[KkmM]" defines a memory region from
+ * <start> to <start>+<mem>, overriding the bios size.
+ */
+static int __init early_memmap(char *from)
+{
+ int userdef = 0;
-#ifdef CONFIG_ACPI_BOOT
- /* "acpi=off" disables both ACPI table parsing and interpreter */
- else if (!memcmp(from, "acpi=off", 8)) {
- acpi_ht = 0;
- acpi_disabled = 1;
+ if (!memcmp(from, "exactmap", 8)) {
+ e820.nr_map = 0;
+ userdef = 1;
+ } else {
+ /* If the user specifies memory size, we
+ * limit the BIOS-provided memory map to
+ * that size. exactmap can be used to specify
+ * the exact map. mem=number can be used to
+ * trim the existing memory map.
+ */
+ unsigned long long start_at, mem_size;
+ mem_size = memparse(from, &from);
+ if (*from == '@') {
+ start_at = memparse(from + 1, &from);
+ add_memory_region(start_at, mem_size, E820_RAM);
+ } else if (*from == '#') {
+ start_at = memparse(from + 1, &from);
+ add_memory_region(start_at, mem_size, E820_ACPI);
+ } else if (*from == '$') {
+ start_at = memparse(from + 1, &from);
+ add_memory_region(start_at, mem_size, E820_RESERVED);
+ } else {
+ limit_regions(mem_size);
+ userdef = 1;
}
+ }
- /* acpi=force to over-ride black-list */
- else if (!memcmp(from, "acpi=force", 10)) {
- acpi_force = 1;
- acpi_ht=1;
- acpi_disabled = 0;
- }
+ if (userdef) {
+ printk(KERN_INFO "user-defined physical RAM map:\n");
+ print_memory_map("user");
+ }
- /* acpi=strict disables out-of-spec workarounds */
- else if (!memcmp(from, "acpi=strict", 11)) {
- acpi_strict = 1;
- }
+ return 0;
+}
+__early_param("memmap=", early_memmap);
- /* Limit ACPI just to boot-time to enable HT */
- else if (!memcmp(from, "acpi=ht", 7)) {
- acpi_ht = 1;
- if (!acpi_force) acpi_disabled = 1;
- }
+#ifdef CONFIG_ACPI_BOOT
+static int __init early_acpi(char *from)
+{
+ /* "off" disables both ACPI table parsing and interpreter */
+ if (!memcmp(from, "off", 3)) {
+ acpi_ht = 0;
+ acpi_disabled = 1;
+ }
+
+ /* "force" to over-ride black-list */
+ else if (!memcmp(from, "force", 5)) {
+ acpi_force = 1;
+ acpi_ht=1;
+ acpi_disabled = 0;
+ }
+
+ /* "strict" disables out-of-spec workarounds */
+ else if (!memcmp(from, "strict", 6))
+ acpi_strict = 1;
+
+ /* Limit ACPI just to boot-time to enable HT */
+ else if (!memcmp(from, "ht", 2)) {
+ acpi_ht = 1;
+ if (!acpi_force) acpi_disabled = 1;
+ }
- /* "pci=noacpi" disables ACPI interrupt routing */
- else if (!memcmp(from, "pci=noacpi", 10)) {
- acpi_noirq_set();
- }
+ return 0;
+}
+__early_param("acpi=", early_acpi);
#ifdef CONFIG_X86_LOCAL_APIC
- /* disable IO-APIC */
- else if (!memcmp(from, "noapic", 6))
- disable_ioapic_setup();
+/* Disable IO-APIC. */
+static int __init early_disable_ioapic(char *from)
+{
+ disable_ioapic_setup();
+
+ return 0;
+}
+__early_param("noapic", early_disable_ioapic);
#endif /* CONFIG_X86_LOCAL_APIC */
#endif /* CONFIG_ACPI_BOOT */
- /*
- * highmem=size forces highmem to be exactly 'size' bytes.
- * This works even on boxes that have no highmem otherwise.
- * This also works to reduce highmem size on bigger boxes.
- */
- if (c == ' ' && !memcmp(from, "highmem=", 8))
- highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT;
-
- c = *(from++);
- if (!c)
- break;
- if (COMMAND_LINE_SIZE <= ++len)
- break;
- *(to++) = c;
- }
- *to = '\0';
- *cmdline_p = command_line;
- if (userdef) {
- printk(KERN_INFO "user-defined physical RAM map:\n");
- print_memory_map("user");
- }
+/*
+ * highmem=size forces highmem to be exactly 'size' bytes.
+ * This works even on boxes that have no highmem otherwise.
+ * This also works to reduce highmem size on bigger boxes.
+ */
+static int __init early_highmem_size(char *from)
+{
+ highmem_pages = memparse(from, &from) >> PAGE_SHIFT;
+
+ return 0;
}
+__early_param("highmem=", early_highmem_size);
/*
* Callback for efi_memory_walk.
@@ -1063,6 +1056,7 @@ __setup("noreplacement", noreplacement_s
*/
void __init setup_arch(char **cmdline_p)
{
+ extern char saved_command_line[];
unsigned long max_low_pfn;
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
@@ -1121,8 +1115,9 @@ void __init setup_arch(char **cmdline_p)
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
- parse_cmdline_early(cmdline_p);
-
+ /* We have the original cmdline stored here already. */
+ *cmdline_p = saved_command_line;
+ parse_early_options(cmdline_p);
max_low_pfn = setup_memory();
/*
@@ -1135,24 +1130,8 @@ void __init setup_arch(char **cmdline_p)
#endif
paging_init();
-#ifdef CONFIG_EARLY_PRINTK
- {
- char *s = strstr(*cmdline_p, "earlyprintk=");
- if (s) {
- extern void setup_early_printk(char *);
-
- setup_early_printk(s);
- printk("early console enabled\n");
- }
- }
-#endif
-
-
dmi_scan_machine();
-#ifdef CONFIG_X86_GENERICARCH
- generic_apic_probe(*cmdline_p);
-#endif
if (efi_enabled)
efi_map_memmap();
diff -puN arch/i386/kernel/vmlinux.lds.S~i386 arch/i386/kernel/vmlinux.lds.S
--- linux-2.6-early_setup/arch/i386/kernel/vmlinux.lds.S~i386 2004-03-24 16:15:04.955072024 -0700
+++ linux-2.6-early_setup-trini/arch/i386/kernel/vmlinux.lds.S 2004-03-24 16:15:04.963070223 -0700
@@ -65,6 +65,9 @@ SECTIONS
__setup_start = .;
.init.setup : { *(.init.setup) }
__setup_end = .;
+ __early_begin = .;
+ __early_param : { *(__early_param) }
+ __early_end = .;
__start___param = .;
__param : { *(__param) }
__stop___param = .;
diff -puN arch/i386/mach-generic/probe.c~i386 arch/i386/mach-generic/probe.c
--- linux-2.6-early_setup/arch/i386/mach-generic/probe.c~i386 2004-03-24 16:15:04.957071574 -0700
+++ linux-2.6-early_setup-trini/arch/i386/mach-generic/probe.c 2004-03-24 16:15:04.963070223 -0700
@@ -28,41 +28,42 @@ struct genapic *apic_probe[] __initdata
NULL,
};
-void __init generic_apic_probe(char *command_line)
-{
- char *s;
+static int __init generic_apic_probe(char *command_line)
+{
+ char *s = command_line;
int i;
int changed = 0;
- s = strstr(command_line, "apic=");
- if (s && (s == command_line || isspace(s[-1]))) {
- char *p = strchr(s, ' '), old;
- if (!p)
- p = strchr(s, '\0');
- old = *p;
- *p = 0;
- for (i = 0; !changed && apic_probe[i]; i++) {
- if (!strcmp(apic_probe[i]->name, s+5)) {
- changed = 1;
- genapic = apic_probe[i];
- }
+ char *p = strchr(s, ' '), old;
+ if (!p)
+ p = strchr(s, '\0');
+ old = *p;
+ *p = 0;
+ for (i = 0; !changed && apic_probe[i]; i++) {
+ if (!strcmp(apic_probe[i]->name, s+5)) {
+ changed = 1;
+ genapic = apic_probe[i];
}
- if (!changed)
- printk(KERN_ERR "Unknown genapic `%s' specified.\n", s);
- *p = old;
- }
- for (i = 0; !changed && apic_probe[i]; i++) {
+ }
+ if (!changed)
+ printk(KERN_ERR "Unknown genapic `%s' specified.\n", s);
+ *p = old;
+
+ for (i = 0; !changed && apic_probe[i]; i++) {
if (apic_probe[i]->probe()) {
changed = 1;
- genapic = apic_probe[i];
- }
+ genapic = apic_probe[i];
+ }
}
- /* Not visible without early console */
- if (!changed)
- panic("Didn't find an APIC driver");
+ /* Not visible without early console */
+ if (!changed)
+ panic("Didn't find an APIC driver");
printk(KERN_INFO "Using APIC driver %s\n", genapic->name);
-}
+
+ return 0;
+}
+__early_param("apic=", generic_apic_probe);
/* These functions can switch the APIC even after the initial ->probe() */
diff -puN drivers/pci/pci.c~i386 drivers/pci/pci.c
--- linux-2.6-early_setup/drivers/pci/pci.c~i386 2004-03-24 16:15:04.959071123 -0700
+++ linux-2.6-early_setup-trini/drivers/pci/pci.c 2004-03-24 16:15:04.964069998 -0700
@@ -718,7 +718,7 @@ static int __devinit pci_setup(char *str
device_initcall(pci_init);
-__setup("pci=", pci_setup);
+__early_param("pci=", pci_setup);
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
/* FIXME: Some boxes have multiple ISA bridges! */
_