2004-04-26 18:52:10

by Andreas Tscharner

[permalink] [raw]
Subject: ACPI problems with 2.4.26 and Toshiba

Hello World,

Since kernel 2.4.21 (or so), ACPI is recognised on my Toshiba Satellite.
Now with kernel 2.4.26, I've read the following lines in dmesg:

ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfd49f, last bus=5
PCI: Using configuration type 1
ACPI: IRQ9 SCI: Level Trigger.
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PCIB.MPC0._PRW] ($ ACPI-0154: *** Error: Method execution
failed [\_SB_.PCI0.PCIB.MPC0._PRW] ($ ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [PFAN] (off)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
...
...


I haven't had this error with kernel 2.4.25. Is this a known problem? If
there is a need for further information I'd like to help.

Best regards
Andreas
--
Andreas Tscharner [email protected]
----------------------------------------------------------------------
"Programming today is a race between software engineers striving to
build bigger and better idiot-proof programs, and the Universe trying
to produce bigger and better idiots. So far, the Universe is winning."
-- Rich Cook