2004-09-07 20:22:46

by Olaf Hering

[permalink] [raw]
Subject: [PATCH] update arch/ppc/defconfig


run make oldconfig, and enable a few useful options.

Signed-off-by: Olaf Hering <[email protected]>


diff -purN linux-2.6.9-rc1-bk14.orig/arch/ppc/defconfig linux-2.6.9-rc1-bk14/arch/ppc/defconfig
--- linux-2.6.9-rc1-bk14.orig/arch/ppc/defconfig 2004-08-14 07:37:38.000000000 +0200
+++ linux-2.6.9-rc1-bk14/arch/ppc/defconfig 2004-09-07 21:48:20.259734125 +0200
@@ -1,5 +1,7 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.9-rc1-bk14
+# Tue Sep 7 21:46:10 2004
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -13,7 +15,6 @@ CONFIG_GENERIC_NVRAM=y
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
CONFIG_BROKEN_ON_SMP=y

#
@@ -31,6 +32,8 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
@@ -38,6 +41,8 @@ CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
@@ -58,6 +63,7 @@ CONFIG_6xx=y
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
+# CONFIG_E500 is not set
CONFIG_ALTIVEC=y
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
@@ -69,6 +75,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_PMAC=y
CONFIG_CPU_FREQ_TABLE=y
@@ -98,9 +105,12 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
+# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
+# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
+# CONFIG_ADS8272 is not set
+# CONFIG_LITE5200 is not set
CONFIG_PPC_CHRP=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PREP=y
@@ -109,11 +119,9 @@ CONFIG_PPCBUG_NVRAM=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PROC_DEVICETREE=y
-CONFIG_PPC_RTAS=y
CONFIG_PREP_RESIDUAL=y
CONFIG_PROC_PREPRESIDUAL=y
CONFIG_CMDLINE_BOOL=y
@@ -138,13 +146,14 @@ CONFIG_PCMCIA_PROBE=y
#
# Advanced setup
#
-CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000

@@ -155,7 +164,10 @@ CONFIG_BOOT_LOAD=0x00800000
#
# Generic Driver Options
#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
@@ -176,6 +188,7 @@ CONFIG_BOOT_LOAD=0x00800000
# Block devices
#
CONFIG_BLK_DEV_FD=m
+# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
@@ -184,7 +197,8 @@ CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
@@ -199,13 +213,13 @@ CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
+# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

@@ -249,6 +263,7 @@ CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_BLINK=y
CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO=y
+# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
@@ -275,7 +290,6 @@ CONFIG_CHR_DEV_SG=y
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

@@ -289,6 +303,7 @@ CONFIG_SCSI_SPI_ATTRS=y
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
@@ -297,18 +312,17 @@ CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_ADVANSYS=m
+# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
@@ -385,8 +399,6 @@ CONFIG_ADB_PMU=y
CONFIG_PMAC_PBOOK=y
CONFIG_PMAC_APM_EMU=y
CONFIG_PMAC_BACKLIGHT=y
-# CONFIG_MAC_FLOPPY is not set
-CONFIG_MAC_SERIAL=m
CONFIG_ADB_MACIO=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
@@ -419,6 +431,7 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set

#
# IP: Virtual Server Configuration
@@ -432,6 +445,8 @@ CONFIG_NETFILTER=y
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
@@ -456,8 +471,14 @@ CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -471,16 +492,13 @@ CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_RAW=m

#
# SCTP Configuration (EXPERIMENTAL)
@@ -504,6 +522,7 @@ CONFIG_IP_NF_RAW=m
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
@@ -533,9 +552,8 @@ CONFIG_MII=y
CONFIG_MACE=y
# CONFIG_MACE_AAUI_PORT is not set
CONFIG_BMAC=y
-# CONFIG_OAKNET is not set
# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
+CONFIG_SUNGEM=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
@@ -571,6 +589,7 @@ CONFIG_PCNET32=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_POCKET is not set

#
@@ -634,15 +653,14 @@ CONFIG_NET_WIRELESS=y
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPPOE is not set
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

@@ -671,7 +689,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
+# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
@@ -724,12 +742,12 @@ CONFIG_SERIAL_8250_NR_UARTS=4
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
-# CONFIG_SERIAL_PMACZILOG_CONSOLE is not set
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set

#
# IPMI
@@ -750,7 +768,6 @@ CONFIG_GEN_RTC=y
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
@@ -766,6 +783,7 @@ CONFIG_I2C_CHARDEV=m
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
@@ -793,23 +811,29 @@ CONFIG_I2C_KEYWEST=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
@@ -821,12 +845,18 @@ CONFIG_I2C_KEYWEST=m
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
# Misc devices
#

@@ -844,6 +874,8 @@ CONFIG_I2C_KEYWEST=m
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
@@ -851,8 +883,8 @@ CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
CONFIG_FB_CT65550=y
+# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
-# CONFIG_FB_S3TRIO is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
@@ -877,6 +909,7 @@ CONFIG_FB_ATY_GX=y
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
+# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -888,7 +921,6 @@ CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -897,9 +929,9 @@ CONFIG_FONT_8x16=y
# Logo configuration
#
CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
+# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set

#
# Sound
@@ -967,6 +999,7 @@ CONFIG_SND_CS4232=m
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
@@ -1009,6 +1042,7 @@ CONFIG_SND_POWERMAC=m
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
@@ -1027,6 +1061,8 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
@@ -1045,6 +1081,7 @@ CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_RW_DETECT=y
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
@@ -1066,6 +1103,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

@@ -1115,18 +1153,18 @@ CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
@@ -1149,6 +1187,7 @@ CONFIG_USB_EZUSB=y
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
@@ -1176,8 +1215,9 @@ CONFIG_EXT2_FS=y
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_ZISOFS_FS=y
# CONFIG_UDF_FS is not set

#
@@ -1186,6 +1226,8 @@ CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
@@ -1194,9 +1236,7 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
@@ -1212,7 +1252,7 @@ CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
@@ -1235,6 +1275,7 @@ CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
@@ -1256,7 +1297,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
@@ -1290,6 +1330,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -1303,20 +1344,35 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=m

#
# Library routines
#
+CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y

#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
# Kernel hacking
#
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SEND_SIGSTOP=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_XMON is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_SCHEDSTATS is not set
CONFIG_BOOTX_TEXT=y

#
--
USB is for mice, FireWire is for men!

sUse lINUX ag, nÜRNBERG


2004-09-07 20:29:17

by Tom Rini

[permalink] [raw]
Subject: Re: [PATCH] update arch/ppc/defconfig

On Tue, Sep 07, 2004 at 10:00:13PM +0200, Olaf Hering wrote:

> run make oldconfig, and enable a few useful options.
>
> Signed-off-by: Olaf Hering <[email protected]>
[snip]
> @@ -724,12 +742,12 @@ CONFIG_SERIAL_8250_NR_UARTS=4
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> +CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_PMACZILOG=y
> -# CONFIG_SERIAL_PMACZILOG_CONSOLE is not set
> +CONFIG_SERIAL_PMACZILOG_CONSOLE=y

Is it all that common for pmacs to be using a serial console?

[snip]
> # Graphics support
> #
> CONFIG_FB=y
> +CONFIG_FB_MODE_HELPERS=y
> +# CONFIG_FB_CIRRUS is not set

If that's working again, we should enable it, Mot PRePs have those
cards.

> @@ -897,9 +929,9 @@ CONFIG_FONT_8x16=y
> # Logo configuration
> #
> CONFIG_LOGO=y
> -CONFIG_LOGO_LINUX_MONO=y
> +# CONFIG_LOGO_LINUX_MONO is not set
> CONFIG_LOGO_LINUX_VGA16=y
> -CONFIG_LOGO_LINUX_CLUT224=y
> +# CONFIG_LOGO_LINUX_CLUT224 is not set

Er, is there a good reason to have only the 16color one?

> @@ -1176,8 +1215,9 @@ CONFIG_EXT2_FS=y
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> -# CONFIG_JOLIET is not set
> -# CONFIG_ZISOFS is not set
> +CONFIG_JOLIET=y
> +CONFIG_ZISOFS=y
> +CONFIG_ZISOFS_FS=y

Ick, please no.

> @@ -1212,7 +1252,7 @@ CONFIG_HFSPLUS_FS=m
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> -# CONFIG_CRAMFS is not set
> +CONFIG_CRAMFS=m

Why?

> +#
> # Kernel hacking
> #
> -# CONFIG_DEBUG_KERNEL is not set
> +CONFIG_DEBUG_KERNEL=y

Why?

--
Tom Rini
http://gate.crashing.org/~trini/

2004-09-07 20:44:05

by Olaf Hering

[permalink] [raw]
Subject: Re: [PATCH] update arch/ppc/defconfig

On Tue, Sep 07, Tom Rini wrote:

> Is it all that common for pmacs to be using a serial console?

It cant hurt.

> If that's working again, we should enable it, Mot PRePs have those
> cards.

It doesnt work for me right now.

> Er, is there a good reason to have only the 16color one?

Why have all 3 enabled?

> > +CONFIG_JOLIET=y
> > +CONFIG_ZISOFS=y
> > +CONFIG_ZISOFS_FS=y
>
> Ick, please no.

Why not?

> > +CONFIG_CRAMFS=m
>
> Why?

Why not?

> > +#
> > # Kernel hacking
> > #
> > -# CONFIG_DEBUG_KERNEL is not set
> > +CONFIG_DEBUG_KERNEL=y
>
> Why?

having sysrq is always a win.

--
USB is for mice, FireWire is for men!

sUse lINUX ag, nÜRNBERG

2004-09-07 21:09:59

by Tom Rini

[permalink] [raw]
Subject: Re: [PATCH] update arch/ppc/defconfig

On Tue, Sep 07, 2004 at 10:41:35PM +0200, Olaf Hering wrote:
> On Tue, Sep 07, Tom Rini wrote:
>
> > Is it all that common for pmacs to be using a serial console?
>
> It cant hurt.
>
> > If that's working again, we should enable it, Mot PRePs have those
> > cards.
>
> It doesnt work for me right now.

Doesn't compile or doesn't work on your prep board?

> > Er, is there a good reason to have only the 16color one?
>
> Why have all 3 enabled?

Because that's the way they are. And I always pick CLUT244 for my
machiens :)

> > > +CONFIG_JOLIET=y
> > > +CONFIG_ZISOFS=y
> > > +CONFIG_ZISOFS_FS=y
> >
> > Ick, please no.
>
> Why not?

Because this is a basic config.

> > > +CONFIG_CRAMFS=m
> >
> > Why?
>
> Why not?

It's not needed or required.

> > > +#
> > > # Kernel hacking
> > > #
> > > -# CONFIG_DEBUG_KERNEL is not set
> > > +CONFIG_DEBUG_KERNEL=y
> >
> > Why?
>
> having sysrq is always a win.

Only when you can see the output. Or do you mean SysRq-S-U-B? :)

--
Tom Rini
http://gate.crashing.org/~trini/

2004-09-07 21:18:13

by Tom Rini

[permalink] [raw]
Subject: Re: [PATCH] update arch/ppc/defconfig

On Tue, Sep 07, 2004 at 11:10:20PM +0200, Olaf Hering wrote:

> On Tue, Sep 07, Tom Rini wrote:
>
> > Doesn't compile or doesn't work on your prep board?
>
> Some PCI stuff goes wrong, its unrelated to cirrusfb.

k.

> > > having sysrq is always a win.
> >
> > Only when you can see the output. Or do you mean SysRq-S-U-B? :)
>
> echo t > /proc/sysrq-trigger

Oh, right.

> Anyway, just send something to akpm that doesnt require interaction during
> make oldconfig

'make defconfig' ?

--
Tom Rini
http://gate.crashing.org/~trini/

2004-09-07 21:17:08

by Olaf Hering

[permalink] [raw]
Subject: Re: [PATCH] update arch/ppc/defconfig

On Tue, Sep 07, Tom Rini wrote:

> Doesn't compile or doesn't work on your prep board?

Some PCI stuff goes wrong, its unrelated to cirrusfb.

> > having sysrq is always a win.
>
> Only when you can see the output. Or do you mean SysRq-S-U-B? :)

echo t > /proc/sysrq-trigger

Anyway, just send something to akpm that doesnt require interaction during
make oldconfig

--
USB is for mice, FireWire is for men!

sUse lINUX ag, nÜRNBERG