This is my first post, so please be forgiving of any faux-pas. I am
having issues with 2.6.8-r1 with memory being eaten by the kernel. Top
reveals that only about 35% of the memory (3GB) is being used but the
actual count of free memory is only about 10MB. /proc/slabinfo shows no
odd numbers and /proc/meminfo shows the same 10MB as the top total. No
processes account for this memory, so I'm assuming it must be the
kernel. Eventually, I run out of memory and OOM-killer starts killing
processes until it has some memory. Is there some troubleshooting method
I am missing or is this a known issue?
Please personally CC me on any response.
.config:
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_THERMAL=y
CONFIG_AUTOFS4_FS=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BONDING=m
CONFIG_CHR_DEV_SG=y
CONFIG_CLEAN_COMPILE=y
CONFIG_CRC32=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_MD5=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_EARLY_PRINTK=y
CONFIG_EPOLL=y
CONFIG_EXPERIMENTAL=y
CONFIG_EXPORTFS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_FS_MBCACHE=y
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUTEX=y
CONFIG_FW_LOADER=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_HIGHMEM4G=y
CONFIG_HIGHMEM=y
CONFIG_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HW_CONSOLE=y
CONFIG_IDE=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDE_GENERIC=y
CONFIG_IDE_TASKFILE_IO=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INET=y
CONFIG_INPUT=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_CFQ=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IP_MULTICAST=y
CONFIG_IRQBALANCE=y
CONFIG_ISA=y
CONFIG_ISO9660_FS=y
CONFIG_JBD=y
CONFIG_KALLSYMS=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KMOD=y
CONFIG_LBD=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_MMU=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MPENTIUM4=y
CONFIG_MSDOS_PARTITION=y
CONFIG_MTRR=y
CONFIG_NET=y
CONFIG_NETDEVICES=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_NR_CPUS=4
CONFIG_OBSOLETE_MODPARM=y
CONFIG_PACKET=y
CONFIG_PC=y
CONFIG_PCI=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_NAMES=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PM=y
CONFIG_PNP=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_RAMFS=y
CONFIG_REISERFS_FS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_SCHED_SMT=y
CONFIG_SCSI=y
CONFIG_SCSI_MEGARAID=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SMP=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_SPEAKUP_DEFAULT="none"
CONFIG_STANDALONE=y
CONFIG_STOP_MACHINE=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SWAP=y
CONFIG_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_SYSVIPC=y
CONFIG_TIGON3=y
CONFIG_TMPFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
CONFIG_UID16=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_UHCI_HCD=y
CONFIG_VGA_CONSOLE=y
CONFIG_VLAN_8021Q=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_X86=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_BSWAP=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_HT=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_INVLPG=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_SMP=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_TSC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_XADD=y
/proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.80GHz
stepping : 9
cpu MHz : 2793.138
cache size : 512 KB
physical id : 0
siblings : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5505.02
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.80GHz
stepping : 9
cpu MHz : 2793.138
cache size : 512 KB
physical id : 0
siblings : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5570.56
/proc/meminfo:
MemTotal: 3115448 kB
MemFree: 2452844 kB
Buffers: 18404 kB
Cached: 74144 kB
SwapCached: 0 kB
Active: 612100 kB
Inactive: 10296 kB
HighTotal: 2228060 kB
HighFree: 1622720 kB
LowTotal: 887388 kB
LowFree: 830124 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
Mapped: 536484 kB
Slab: 29800 kB
Committed_AS: 864432 kB
PageTables: 1612 kB
VmallocTotal: 114680 kB
VmallocUsed: 900 kB
VmallocChunk: 113780 kB
/proc/slabinfo:
rpc_buffers 8 8 2048 2 1 : tunables 24 12
8 : slabdata 4 4 0
rpc_tasks 8 15 256 15 1 : tunables 120 60
8 : slabdata 1 1 0
rpc_inode_cache 10 14 512 7 1 : tunables 54 27
8 : slabdata 2 2 0
unix_sock 20 42 512 7 1 : tunables 54 27
8 : slabdata 5 6 0
tcp_tw_bucket 1581 1581 128 31 1 : tunables 120 60
8 : slabdata 51 51 120
tcp_bind_bucket 109 226 16 226 1 : tunables 120 60
8 : slabdata 1 1 0
tcp_open_request 111 183 64 61 1 : tunables 120 60
8 : slabdata 3 3 0
inet_peer_cache 6 61 64 61 1 : tunables 120 60
8 : slabdata 1 1 0
ip_fib_hash 10 226 16 226 1 : tunables 120 60
8 : slabdata 1 1 0
ip_dst_cache 54300 54300 256 15 1 : tunables 120 60
8 : slabdata 3620 3620 0
arp_cache 12 15 256 15 1 : tunables 120 60
8 : slabdata 1 1 0
raw4_sock 0 0 512 7 1 : tunables 54 27
8 : slabdata 0 0 0
udp_sock 2 8 512 8 1 : tunables 54 27
8 : slabdata 1 1 0
tcp_sock 806 854 1152 7 2 : tunables 24 12
8 : slabdata 122 122 96
flow_cache 0 0 128 31 1 : tunables 120 60
8 : slabdata 0 0 0
uhci_urb_priv 0 0 44 88 1 : tunables 120 60
8 : slabdata 0 0 0
scsi_cmd_cache 1 10 384 10 1 : tunables 54 27
8 : slabdata 1 1 0
udf_inode_cache 0 0 384 10 1 : tunables 54 27
8 : slabdata 0 0 0
nfs_write_data 36 42 512 7 1 : tunables 54 27
8 : slabdata 6 6 0
nfs_read_data 32 35 512 7 1 : tunables 54 27
8 : slabdata 5 5 0
nfs_inode_cache 2 12 640 6 1 : tunables 54 27
8 : slabdata 2 2 0
nfs_page 0 0 128 31 1 : tunables 120 60
8 : slabdata 0 0 0
isofs_inode_cache 0 0 384 10 1 : tunables 54 27
8 : slabdata 0 0 0
ext2_inode_cache 0 0 512 7 1 : tunables 54 27
8 : slabdata 0 0 0
journal_handle 0 0 28 135 1 : tunables 120 60
8 : slabdata 0 0 0
journal_head 7 81 48 81 1 : tunables 120 60
8 : slabdata 1 1 0
revoke_table 2 290 12 290 1 : tunables 120 60
8 : slabdata 1 1 0
revoke_record 0 0 16 226 1 : tunables 120 60
8 : slabdata 0 0 0
ext3_inode_cache 3654 3675 512 7 1 : tunables 54 27
8 : slabdata 525 525 0
ext3_xattr 0 0 48 81 1 : tunables 120 60
8 : slabdata 0 0 0
reiser_inode_cache 88 98 512 7 1 : tunables 54 27
8 : slabdata 14 14 0
eventpoll_pwq 693 749 36 107 1 : tunables 120 60
8 : slabdata 7 7 0
eventpoll_epi 701 744 128 31 1 : tunables 120 60
8 : slabdata 24 24 60
kioctx 0 0 256 15 1 : tunables 120 60
8 : slabdata 0 0 0
kiocb 0 0 128 31 1 : tunables 120 60
8 : slabdata 0 0 0
dnotify_cache 0 0 20 185 1 : tunables 120 60
8 : slabdata 0 0 0
file_lock_cache 4 41 96 41 1 : tunables 120 60
8 : slabdata 1 1 0
fasync_cache 0 0 16 226 1 : tunables 120 60
8 : slabdata 0 0 0
shmem_inode_cache 8 14 512 7 1 : tunables 54 27
8 : slabdata 2 2 0
posix_timers_cache 0 0 104 38 1 : tunables 120 60
8 : slabdata 0 0 0
uid_cache 5 119 32 119 1 : tunables 120 60
8 : slabdata 1 1 0
sgpool-128 32 32 2048 2 1 : tunables 24 12
8 : slabdata 16 16 0
sgpool-64 32 32 1024 4 1 : tunables 54 27
8 : slabdata 8 8 0
sgpool-32 32 32 512 8 1 : tunables 54 27
8 : slabdata 4 4 0
sgpool-16 32 45 256 15 1 : tunables 120 60
8 : slabdata 3 3 0
sgpool-8 32 62 128 31 1 : tunables 120 60
8 : slabdata 2 2 0
cfq_pool 64 119 32 119 1 : tunables 120 60
8 : slabdata 1 1 0
crq_pool 0 0 40 96 1 : tunables 120 60
8 : slabdata 0 0 0
deadline_drq 0 0 52 75 1 : tunables 120 60
8 : slabdata 0 0 0
as_arq 16 61 64 61 1 : tunables 120 60
8 : slabdata 1 1 0
blkdev_ioc 18 185 20 185 1 : tunables 120 60
8 : slabdata 1 1 0
blkdev_queue 20 32 464 8 1 : tunables 54 27
8 : slabdata 4 4 0
blkdev_requests 16 25 160 25 1 : tunables 120 60
8 : slabdata 1 1 0
biovec-(256) 256 256 3072 2 2 : tunables 24 12
8 : slabdata 128 128 0
biovec-128 256 260 1536 5 2 : tunables 24 12
8 : slabdata 52 52 0
biovec-64 256 260 768 5 1 : tunables 54 27
8 : slabdata 52 52 0
biovec-16 256 270 256 15 1 : tunables 120 60
8 : slabdata 18 18 0
biovec-4 256 305 64 61 1 : tunables 120 60
8 : slabdata 5 5 0
biovec-1 256 452 16 226 1 : tunables 120 60
8 : slabdata 2 2 0
bio 256 279 128 31 1 : tunables 120 60
8 : slabdata 9 9 0
sock_inode_cache 768 810 384 10 1 : tunables 54 27
8 : slabdata 81 81 54
skbuff_head_cache 1470 1710 256 15 1 : tunables 120 60
8 : slabdata 114 114 224
sock 2 10 384 10 1 : tunables 54 27
8 : slabdata 1 1 0
proc_inode_cache 1293 1340 384 10 1 : tunables 54 27
8 : slabdata 134 134 13
sigqueue 135 135 148 27 1 : tunables 120 60
8 : slabdata 5 5 0
radix_tree_node 5313 5334 276 14 1 : tunables 54 27
8 : slabdata 381 381 0
bdev_cache 5 14 512 7 1 : tunables 54 27
8 : slabdata 2 2 0
mnt_cache 20 31 128 31 1 : tunables 120 60
8 : slabdata 1 1 0
inode_cache 1265 1300 384 10 1 : tunables 54 27
8 : slabdata 130 130 0
dentry_cache 7947 7992 144 27 1 : tunables 120 60
8 : slabdata 296 296 15
filp 1275 1275 256 15 1 : tunables 120 60
8 : slabdata 85 85 60
names_cache 25 25 4096 1 1 : tunables 24 12
8 : slabdata 25 25 0
idr_layer_cache 62 87 136 29 1 : tunables 120 60
8 : slabdata 3 3 0
buffer_head 13859 15300 52 75 1 : tunables 120 60
8 : slabdata 204 204 0
mm_struct 103 120 640 6 1 : tunables 54 27
8 : slabdata 20 20 0
vm_area_struct 1436 1645 84 47 1 : tunables 120 60
8 : slabdata 35 35 0
fs_cache 30 183 64 61 1 : tunables 120 60
8 : slabdata 3 3 0
files_cache 41 70 512 7 1 : tunables 54 27
8 : slabdata 10 10 0
signal_cache 53 155 128 31 1 : tunables 120 60
8 : slabdata 5 5 0
sighand_cache 62 90 1408 5 2 : tunables 24 12
8 : slabdata 18 18 0
task_struct 71 100 1440 5 2 : tunables 24 12
8 : slabdata 20 20 0
anon_vma 790 870 12 290 1 : tunables 120 60
8 : slabdata 3 3 0
pgd 92 92 4096 1 1 : tunables 24 12
8 : slabdata 92 92 0
size-131072(DMA) 0 0 131072 1 32 : tunables 8 4
0 : slabdata 0 0 0
size-131072 0 0 131072 1 32 : tunables 8 4
0 : slabdata 0 0 0
size-65536(DMA) 0 0 65536 1 16 : tunables 8 4
0 : slabdata 0 0 0
size-65536 0 0 65536 1 16 : tunables 8 4
0 : slabdata 0 0 0
size-32768(DMA) 0 0 32768 1 8 : tunables 8 4
0 : slabdata 0 0 0
size-32768 1 1 32768 1 8 : tunables 8 4
0 : slabdata 1 1 0
size-16384(DMA) 0 0 16384 1 4 : tunables 8 4
0 : slabdata 0 0 0
size-16384 0 0 16384 1 4 : tunables 8 4
0 : slabdata 0 0 0
size-8192(DMA) 0 0 8192 1 2 : tunables 8 4
0 : slabdata 0 0 0
size-8192 64 67 8192 1 2 : tunables 8 4
0 : slabdata 64 67 0
size-4096(DMA) 0 0 4096 1 1 : tunables 24 12
8 : slabdata 0 0 0
size-4096 49 49 4096 1 1 : tunables 24 12
8 : slabdata 49 49 0
size-2048(DMA) 0 0 2048 2 1 : tunables 24 12
8 : slabdata 0 0 0
size-2048 536 634 2048 2 1 : tunables 24 12
8 : slabdata 317 317 96
size-1024(DMA) 0 0 1024 4 1 : tunables 54 27
8 : slabdata 0 0 0
size-1024 206 220 1024 4 1 : tunables 54 27
8 : slabdata 55 55 13
size-512(DMA) 0 0 512 8 1 : tunables 54 27
8 : slabdata 0 0 0
size-512 1116 1440 512 8 1 : tunables 54 27
8 : slabdata 180 180 108
size-256(DMA) 0 0 256 15 1 : tunables 120 60
8 : slabdata 0 0 0
size-256 156 900 256 15 1 : tunables 120 60
8 : slabdata 60 60 0
size-128(DMA) 0 0 128 31 1 : tunables 120 60
8 : slabdata 0 0 0
size-128 798 1302 128 31 1 : tunables 120 60
8 : slabdata 42 42 0
size-64(DMA) 0 0 64 61 1 : tunables 120 60
8 : slabdata 0 0 0
size-64 1460 4880 64 61 1 : tunables 120 60
8 : slabdata 80 80 0
size-32(DMA) 0 0 32 119 1 : tunables 120 60
8 : slabdata 0 0 0
size-32 1764 1904 32 119 1 : tunables 120 60
8 : slabdata 16 16 30
kmem_cache 135 135 256 15 1 : tunables 120 60
8 : slabdata 9 9 0
On Sun, 19 Sep 2004 16:20:48 -0700, Max Michaels
<[email protected]> wrote:
> This is my first post, so please be forgiving of any faux-pas. I am
> having issues with 2.6.8-r1 with memory being eaten by the kernel.
[ I've not yet gone through your .config ]
Could you describe the hardware and any devices that you're using -
looks like you're avoiding modules but it would be helpful to see an
attached dmesg output and lspci -v or similar.
Cheers,
Jon.
>Could you describe the hardware and any devices that you're using -
>looks like you're avoiding modules but it would be helpful to see an
>attached dmesg output and lspci -v or similar.
Dmesg:
Calibrating delay loop... 5505.02 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
per-CPU timeslice cutoff: 1462.56 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
Booting processor 1/6 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5570.56 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
Total of 2 processors activated (11075.58 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9,
9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 10-0, 10-1, 10-2, 10-3, 10-4, 10-5,
10-6, 10-7, 10-8, 10-9, 10-10, 10-11, 10-12, 10-13, 10-14, 10-15 not
connected.
..TIMER: vector=0x31 pin1=0 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2791.0474 MHz.
..... host bus clock speed is 132.0927 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0: online
domain 0: span 1
groups: 1
domain 1: span 3
groups: 1 2
CPU1: online
domain 0: span 2
groups: 2
domain 1: span 3
groups: 2 1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc91e, last bus=4
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI4] (00:04)
PCI: Probing PCI hardware (bus 04)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT]
ACPI: PCI Root Bridge [PCI3] (00:03)
PCI: Probing PCI hardware (bus 03)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
ACPI: PCI Root Bridge [PCI2] (00:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 6 *7 9 10 11 12)
ACPI: PCI Interrupt Link [LNK1] (IRQs 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNK2] (IRQs 4 5 6 *7 9 10 11 12)
ACPI: PCI Interrupt Link [LNK3] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK9] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN10] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN11] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN12] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN13] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN15] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN16] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN17] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN18] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN19] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN1E] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LN1F] (IRQs 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LUSB] (IRQs 4 5 6 7 10 *11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:04:03.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17
number of MP IRQ sources: 16.
number of IO-APIC #8 registers: 16.
number of IO-APIC #9 registers: 16.
number of IO-APIC #10 registers: 16.
testing the IO APIC.......................
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 08000000
....... : arbitration: 08
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31
01 003 03 0 0 0 0 0 1 1 39
02 003 03 1 0 0 0 0 1 1 41
03 003 03 0 0 0 0 0 1 1 49
04 003 03 0 0 0 0 0 1 1 51
05 003 03 0 0 0 0 0 1 1 59
06 003 03 0 0 0 0 0 1 1 61
07 003 03 0 0 0 0 0 1 1 69
08 003 03 0 0 0 0 0 1 1 71
09 003 03 0 1 0 1 0 1 1 79
0a 003 03 0 0 0 0 0 1 1 81
0b 003 03 1 1 0 1 0 1 1 89
0c 003 03 0 0 0 0 0 1 1 91
0d 003 03 0 0 0 0 0 1 1 99
0e 003 03 0 0 0 0 0 1 1 A1
0f 003 03 0 0 0 0 0 1 1 A9
IO APIC #9......
.... register #00: 09000000
....... : physical APIC id: 09
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 09000000
....... : arbitration: 09
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 B9
01 003 03 1 1 0 1 0 1 1 C1
02 003 03 1 1 0 1 0 1 1 B1
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IO APIC #10......
.... register #00: 0A000000
....... : physical APIC id: 0A
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0A000000
....... : arbitration: 0A
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 1:0
IRQ17 -> 1:1
IRQ18 -> 1:2
.................................... done.
Machine check exception polling timer started.
Starting balanced_irq
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 [email protected]).
udf: registering filesystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
tg3.c:v3.8 (July 14, 2004)
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)]
(PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:db:94:e4:e1
eth0: HostTXDS[1] RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0]
WireSpeed[1] TSOcap[1]
ACPI: PCI interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17
eth1: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)]
(PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:db:94:e4:e2
eth1: HostTXDS[1] RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0]
WireSpeed[1] TSOcap[1]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:pio, hdb:pio
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:pio
hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124 (blacklisted)
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:04:03.0[A] -> GSI 18 (level, low) -> IRQ 18
megaraid: found 0x1028:0x000f:bus 4:slot 3:func 0
scsi0:Found MegaRAID controller at 0xf8829000, IRQ:18
megaraid: [4.10:B111] detected 1 logical drives.
megaraid: supports extended CDBs.
megaraid: channel[0] is raid.
megaraid: channel[1] is raid.
scsi0 : LSI Logic MegaRAID 4.10 254 commands 16 targs 5 chans 7 luns
scsi0: scanning scsi channel 0 for logical drives.
Vendor: MegaRAID Model: LD 0 RAID5 139G Rev: 4.10
Type: Direct-Access ANSI SCSI revision: 02
scsi0: scanning scsi channel 1 for logical drives.
scsi0: scanning scsi channel 2 for logical drives.
scsi0: scanning scsi channel 4 [P0] for physical devices.
Vendor: PE/PV Model: 1x3 SCSI BP Rev: 1.1
Type: Processor ANSI SCSI revision: 02
scsi0: scanning scsi channel 5 [P1] for physical devices.
SCSI device sda: 285728768 512-byte hdwr sectors (146293 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 4, id 6, lun 0, type 3
Fusion MPT base driver 3.01.09
Copyright (c) 1999-2004 LSI Logic Corporation
Fusion MPT SCSI Host driver 3.01.09
USB Universal Host Controller Interface driver v2.2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 99228
EXT3-fs: sda2: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 164k freed
EXT3 FS on sda2, internal journal
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
nfs warning: mount version older than kernel
nfs warning: mount version older than kernel
lspci -v
0000:00:00.0 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE
chipset) (rev 33)
Flags: fast devsel
0000:00:00.1 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE
chipset)
Flags: fast devsel
0000:00:00.2 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE
chipset)
Flags: fast devsel
0000:00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL
(rev 27) (prog-if 00 [VGA])
Subsystem: Dell: Unknown device 014a
Flags: bus master, VGA palette snoop, stepping, medium devsel,
latency 32
Memory at fd000000 (32-bit, non-prefetchable)
I/O ports at ec00 [size=256]
Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [5c] Power Management version 2
0000:00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)
Subsystem: ServerWorks CSB5 South Bridge
Flags: bus master, medium devsel, latency 32
0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
(prog-if 8a [Master SecP PriP])
Subsystem: Dell: Unknown device 014a
Flags: bus master, medium devsel, latency 64
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 08b0 [size=16]
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller
(rev 05) (prog-if 10 [OHCI])
Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fe100000 (32-bit, non-prefetchable)
0000:00:0f.3 ISA bridge: ServerWorks CSB5 LPC bridge
Subsystem: ServerWorks: Unknown device 0230
Flags: bus master, medium devsel, latency 0
0000:00:10.0 Host bridge: ServerWorks CIOB-E I/O Bridge with Gigabit
Ethernet (rev 12)
Flags: 66Mhz, medium devsel
Capabilities: [60]
0000:00:10.2 Host bridge: ServerWorks CIOB-E I/O Bridge with Gigabit
Ethernet (rev 12)
Flags: 66Mhz, medium devsel
Capabilities: [60]
0000:00:11.0 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
Flags: 66Mhz, medium devsel
Capabilities: [60]
0000:00:11.2 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
Flags: 66Mhz, medium devsel
Capabilities: [60]
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet (rev 02)
Subsystem: Dell: Unknown device 014a
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 16
Memory at fcf30000 (64-bit, non-prefetchable)
Memory at fcf20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Capabilities: [48] Power Management
version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
0000:02:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet (rev 02)
Subsystem: Dell: Unknown device 014a
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 17
Memory at fcf10000 (64-bit, non-prefetchable)
Memory at fcf00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Capabilities: [48] Power Management
version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
0000:04:03.0 RAID bus controller: Dell PowerEdge Expandable RAID
controller 4/Di (rev 02)
Subsystem: Dell: Unknown device 014a
Flags: bus master, stepping, 66Mhz, medium devsel, latency 32,
IRQ 18
Memory at f0000000 (32-bit, prefetchable) [size=fcc00000]
Memory at fcd00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 00008000 [disabled]
Capabilities: [c0] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable-
Capabilities: [e0] PCI-X non-bridge device.
On Sun, Sep 19, 2004 at 04:20:48PM -0700, Max Michaels wrote:
> This is my first post, so please be forgiving of any faux-pas. I am
> having issues with 2.6.8-r1 with memory being eaten by the kernel. Top
> reveals that only about 35% of the memory (3GB) is being used but the
> actual count of free memory is only about 10MB. /proc/slabinfo shows no
> odd numbers and /proc/meminfo shows the same 10MB as the top total. No
> processes account for this memory, so I'm assuming it must be the
> kernel. Eventually, I run out of memory and OOM-killer starts killing
> processes until it has some memory. Is there some troubleshooting method
> I am missing or is this a known issue?
Hi Max,
Please try 2.6.9-rc2-mm1 and see if you can reproduce the problem there.
If you can, please apply the attached patch and wait for the OOM killer to trigger.
Doing so will show us how many swap pages were free at the moment of the killing,
if there was swap space available there's something wrong.
Max,
I reported the same problem. There is a patch that gets around this,
however, it does
Ooops in some situations in free_pages if you are using split address space
AND low memory conditions. Nick Piggin has the patch.
Jeff
Max Michaels wrote:
>This is my first post, so please be forgiving of any faux-pas. I am
>having issues with 2.6.8-r1 with memory being eaten by the kernel. Top
>reveals that only about 35% of the memory (3GB) is being used but the
>actual count of free memory is only about 10MB. /proc/slabinfo shows no
>odd numbers and /proc/meminfo shows the same 10MB as the top total. No
>processes account for this memory, so I'm assuming it must be the
>kernel. Eventually, I run out of memory and OOM-killer starts killing
>processes until it has some memory. Is there some troubleshooting method
>I am missing or is this a known issue?
>
>
>