Hello Francois,
I read your email with a subject "[mini-RFT] r8169 and amd64" at LKML
(archive). Since I am not subscribed to LKML I am unable to answer to that
thread. Sorry.
Anyway, I have applied your patch at
http://www.fr.zoreil.com/people/francois/misc/20041020-2.6.9-r8169.c-test.patch
to vanilla 2.6.9, and tested it on my AMD64.
In its default configuration, ie, without use_dac=1 parameter, it works great.
But OTOH with that parameter kernel displays these messages:
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xffffff0000040000, 00:0d:61:15:23:e6, IRQ 18
r8169: eth0: PCI error (cmd = 0x0017, status = 0x22b0).
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
And the network card does not work, as I cannot ping another host (DSL
modem/router) on the network.
(Once I load the module with that parameter, unloading and reloading it
without that parameter does not bring the network card back to its working
configuration.)
Thank you.
Hari.
Srihari Vijayaraghavan <[email protected]> :
[...]
> r8169: eth0: PCI error (cmd = 0x0017, status = 0x22b0).
> eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>
> And the network card does not work, as I cannot ping another host (DSL
> modem/router) on the network.
>
> (Once I load the module with that parameter, unloading and reloading it
> without that parameter does not bring the network card back to its working
> configuration.)
Thanks a lot.
- it does not crash but it did not recover;
- no difference with the newly reported PCI error under load on a 32bit host.
Bad mojo.
--
Ueimor
>