Nothing new, just updating for recent kernels.
BK users:
bk pull bk://gkernel.bkbits.net/libata-dev-2.6
Patch:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.6.10-rc1-bk5-libata1-dev1.patch.bz2
The libata-dev-2.6 patch requires the libata-2.6 patch, which is
available at:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.6.10-rc1-bk5-libata1.patch.bz2
This will update the following files:
drivers/scsi/Kconfig | 8
drivers/scsi/Makefile | 1
drivers/scsi/libata-core.c | 38 +-
drivers/scsi/libata-scsi.c | 395 +++++++++++++++++++++-
drivers/scsi/libata.h | 2
drivers/scsi/pata_pdc2027x.c | 758 +++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/sata_promise.c | 56 +++
include/linux/ata.h | 1
include/linux/libata.h | 2
include/scsi/scsi.h | 3
10 files changed, 1249 insertions(+), 15 deletions(-)
through these ChangeSets:
<albertcc:tw.ibm.com>:
o [libata] add driver for Promise PATA 2027x
<andyw:pobox.com>:
o [libata scsi] support 12-byte passthru CDB
o [libata scsi] passthru CDB check condition processing
o T10/04-262 ATA pass thru - patch
<erikbenada:yahoo.ca>:
o [libata sata_promise] support PATA ports on SATA controllers
Brad Campbell:
o libata basic detection and errata for PATA->SATA bridges
Jeff Garzik:
o [libata] fix SATA->PATA bridge detect compile breakage
o [libata] use kunmap_atomic() correctly
o [libata] fix printk warning
John W. Linville:
o libata: SMART support via ATA pass-thru
Jeff Garzik wrote:
> Nothing new, just updating for recent kernels.
>
> BK users:
>
> bk pull bk://gkernel.bkbits.net/libata-dev-2.6
Oh yeah... for those with a local clone of libata-dev-2.6, please erase
and re-clone.
Jeff
Rob van Nieuwkerk wrote:
> On Wed, 27 Oct 2004 02:52:08 -0400
> Jeff Garzik <[email protected]> wrote:
>
> Hi Jeff,
>
>
>>John W. Linville:
>> o libata: SMART support via ATA pass-thru
>
>
> Does this mean that now we can use SMART on SATA disks ?
> Or only PATA disks ?
Both.
Jeff
On Wed, 27 Oct 2004 02:52:08 -0400
Jeff Garzik <[email protected]> wrote:
Hi Jeff,
> John W. Linville:
> o libata: SMART support via ATA pass-thru
Does this mean that now we can use SMART on SATA disks ?
Or only PATA disks ?
greetings,
Rob van Nieuwkerk