Updates to cciss documentation.
mkdev.cciss is no longer needed, since it is handled by the MAKEDEV program.
diffstat output:
00-INDEX | 2 --
cciss.txt | 27 +++++++++++++--------------
mkdev.cciss | 40 ----------------------------------------
3 files changed, 13 insertions(+), 56 deletions(-)
Signed-off-by: James Nelson <[email protected]>
diff -urN --exclude='*~' linux-2.6.10-rc2-original/Documentation/00-INDEX linux-2.6.10-rc2/Documentation/00-INDEX
--- linux-2.6.10-rc2-original/Documentation/00-INDEX 2004-11-15 21:38:04.184988235 -0500
+++ linux-2.6.10-rc2/Documentation/00-INDEX 2004-11-16 17:29:28.213406296 -0500
@@ -174,8 +174,6 @@
- info on typical Linux memory problems.
mips/
- directory with info about Linux on MIPS architecture.
-mkdev.cciss
- - script to make /dev entries for SMART controllers (see cciss.txt).
mono.txt
- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
moxa-smartio
diff -urN --exclude='*~' linux-2.6.10-rc2-original/Documentation/cciss.txt linux-2.6.10-rc2/Documentation/cciss.txt
--- linux-2.6.10-rc2-original/Documentation/cciss.txt 2004-10-18 17:53:21.000000000 -0400
+++ linux-2.6.10-rc2/Documentation/cciss.txt 2004-11-16 17:17:48.093924758 -0500
@@ -17,25 +17,27 @@
* SA 6422
* SA V100
-If nodes are not already created in the /dev/cciss directory
+If nodes are not already created in the /dev/cciss directory, run as root:
-# mkdev.cciss [ctlrs]
-
-Where ctlrs is the number of controllers you have (defaults to 1 if not
-specified).
+# cd /dev
+# ./MAKEDEV cciss
Device Naming:
--------------
-You need some entries in /dev for the cciss device. The mkdev.cciss script
+You need some entries in /dev for the cciss device. The MAKEDEV script
can make device nodes for you automatically. Currently the device setup
is as follows:
Major numbers:
104 cciss0
105 cciss1
- 106 cciss2
- etc...
+ 106 cciss2
+ 105 cciss3
+ 108 cciss4
+ 109 cciss5
+ 110 cciss6
+ 111 cciss7
Minor numbers:
b7 b6 b5 b4 b3 b2 b1 b0
@@ -45,7 +47,7 @@
|
+-------------------- Logical Volume number
-The suggested device naming scheme is:
+The device naming scheme is:
/dev/cciss/c0d0 Controller 0, disk 0, whole device
/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1
/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2
@@ -117,16 +119,13 @@
Note that the naming convention of the /proc filesystem entries
contains a number in addition to the driver name. (E.g. "cciss0"
-instead of just "cciss" which you might expect.) This is because
-of changes to the 2.4 kernel PCI interface related to PCI hot plug
-that imply the driver must register with the SCSI mid layer once per
-adapter instance rather than once per driver.
+instead of just "cciss" which you might expect.)
Note: ONLY sequential access devices and medium changers are presented
as SCSI devices to the SCSI mid layer by the cciss driver. Specifically,
physical SCSI disk drives are NOT presented to the SCSI mid layer. The
physical SCSI disk drives are controlled directly by the array controller
-hardware and it is important to prevent the OS from attempting to directly
+hardware and it is important to prevent the kernel from attempting to directly
access these devices too, as if the array controller were merely a SCSI
controller in the same way that we are allowing it to access SCSI tape drives.
diff -urN --exclude='*~' linux-2.6.10-rc2-original/Documentation/mkdev.cciss linux-2.6.10-rc2/Documentation/mkdev.cciss
--- linux-2.6.10-rc2-original/Documentation/mkdev.cciss 2004-10-18 17:53:13.000000000 -0400
+++ linux-2.6.10-rc2/Documentation/mkdev.cciss 1969-12-31 19:00:00.000000000 -0500
@@ -1,40 +0,0 @@
-#!/bin/sh
-# Script to create device nodes for SMART array controllers
-# Usage:
-# mkdev.cciss [num controllers] [num log volumes] [num partitions]
-#
-# With no arguments, the script assumes 1 controller, 16 logical volumes,
-# and 16 partitions/volume, which is adequate for most configurations.
-#
-# If you had 5 controllers and were planning on no more than 4 logical volumes
-# each, using a maximum of 8 partitions per volume, you could say:
-#
-# mkdev.cciss 5 4 8
-#
-# Of course, this has no real benefit over "mkdev.cciss 5" except that it
-# doesn't create so many device nodes in /dev/cciss.
-
-NR_CTLR=${1-1}
-NR_VOL=${2-16}
-NR_PART=${3-16}
-
-if [ ! -d /dev/cciss ]; then
- mkdir -p /dev/cciss
-fi
-
-C=0; while [ $C -lt $NR_CTLR ]; do
- MAJ=`expr $C + 104`
- D=0; while [ $D -lt $NR_VOL ]; do
- P=0; while [ $P -lt $NR_PART ]; do
- MIN=`expr $D \* 16 + $P`
- if [ $P -eq 0 ]; then
- mknod /dev/cciss/c${C}d${D} b $MAJ $MIN
- else
- mknod /dev/cciss/c${C}d${D}p${P} b $MAJ $MIN
- fi
- P=`expr $P + 1`
- done
- D=`expr $D + 1`
- done
- C=`expr $C + 1`
-done
Correct mailing list address in cpqarray source code.
diffstat output:
cpqarray.c | 2 +-
cpqarray.h | 2 +-
ida_cmd.h | 2 +-
ida_ioctl.h | 2 +-
smart1,2.h | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
Signed-off-by: James Nelson <[email protected]>
diff -urN --exclude='*~' linux-2.6.10-rc2-original/drivers/block/cpqarray.c linux-2.6.10-rc2/drivers/block/cpqarray.c
--- linux-2.6.10-rc2-original/drivers/block/cpqarray.c 2004-11-15 21:38:15.707432667 -0500
+++ linux-2.6.10-rc2/drivers/block/cpqarray.c 2004-11-16 17:26:45.127423447 -0500
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to [email protected]
+ * Questions/Comments/Bugfixes to [email protected]
*
*/
#include <linux/config.h> /* CONFIG_PROC_FS */
diff -urN --exclude='*~' linux-2.6.10-rc2-original/drivers/block/cpqarray.h linux-2.6.10-rc2/drivers/block/cpqarray.h
--- linux-2.6.10-rc2-original/drivers/block/cpqarray.h 2004-10-18 17:54:37.000000000 -0400
+++ linux-2.6.10-rc2/drivers/block/cpqarray.h 2004-11-16 17:26:24.440216288 -0500
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to [email protected]
+ * Questions/Comments/Bugfixes to [email protected]
*
* If you want to make changes, improve or add functionality to this
* driver, you'll probably need the Compaq Array Controller Interface
diff -urN --exclude='*~' linux-2.6.10-rc2-original/drivers/block/ida_cmd.h linux-2.6.10-rc2/drivers/block/ida_cmd.h
--- linux-2.6.10-rc2-original/drivers/block/ida_cmd.h 2004-10-18 17:53:45.000000000 -0400
+++ linux-2.6.10-rc2/drivers/block/ida_cmd.h 2004-11-16 17:26:12.178871611 -0500
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to [email protected]
+ * Questions/Comments/Bugfixes to [email protected]
*
*/
#ifndef ARRAYCMD_H
diff -urN --exclude='*~' linux-2.6.10-rc2-original/drivers/block/ida_ioctl.h linux-2.6.10-rc2/drivers/block/ida_ioctl.h
--- linux-2.6.10-rc2-original/drivers/block/ida_ioctl.h 2004-10-18 17:54:08.000000000 -0400
+++ linux-2.6.10-rc2/drivers/block/ida_ioctl.h 2004-11-16 17:25:57.796813237 -0500
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to [email protected]
+ * Questions/Comments/Bugfixes to [email protected]
*
*/
#ifndef IDA_IOCTL_H
diff -urN --exclude='*~' linux-2.6.10-rc2-original/drivers/block/smart1,2.h linux-2.6.10-rc2/drivers/block/smart1,2.h
--- linux-2.6.10-rc2-original/drivers/block/smart1,2.h 2004-10-18 17:54:37.000000000 -0400
+++ linux-2.6.10-rc2/drivers/block/smart1,2.h 2004-11-16 17:25:48.198109094 -0500
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to [email protected]
+ * Questions/Comments/Bugfixes to [email protected]
*
* If you want to make changes, improve or add functionality to this
* driver, you'll probably need the Compaq Array Controller Interface
Correct mailing list address in cciss source code.
diffstat output:
cciss.c | 2 +-
cciss_scsi.c | 2 +-
cciss_scsi.h | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
Signed-off-by: James Nelson <[email protected]>
diff -urN --exclude='*~' linux-2.6.10-rc2-original/drivers/block/cciss.c linux-2.6.10-rc2/drivers/block/cciss.c
--- linux-2.6.10-rc2-original/drivers/block/cciss.c 2004-11-15 21:38:15.683435907 -0500
+++ linux-2.6.10-rc2/drivers/block/cciss.c 2004-11-16 17:27:02.056138014 -0500
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to [email protected]
+ * Questions/Comments/Bugfixes to [email protected]
*
*/
diff -urN --exclude='*~' linux-2.6.10-rc2-original/drivers/block/cciss_scsi.c linux-2.6.10-rc2/drivers/block/cciss_scsi.c
--- linux-2.6.10-rc2-original/drivers/block/cciss_scsi.c 2004-11-15 21:38:15.685435637 -0500
+++ linux-2.6.10-rc2/drivers/block/cciss_scsi.c 2004-11-16 17:47:28.924506697 -0500
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to [email protected]
+ * Questions/Comments/Bugfixes to [email protected]
*
* Author: Stephen M. Cameron
*/
diff -urN --exclude='*~' linux-2.6.10-rc2-original/drivers/block/cciss_scsi.h linux-2.6.10-rc2/drivers/block/cciss_scsi.h
--- linux-2.6.10-rc2-original/drivers/block/cciss_scsi.h 2004-10-18 17:54:22.000000000 -0400
+++ linux-2.6.10-rc2/drivers/block/cciss_scsi.h 2004-11-16 17:47:21.868459287 -0500
@@ -16,7 +16,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to [email protected]
+ * Questions/Comments/Bugfixes to [email protected]
*
*/
#ifdef CONFIG_CISS_SCSI_TAPE
> Updates to cciss documentation.
>
> mkdev.cciss is no longer needed, since it is handled by the
> MAKEDEV program.
>
> diffstat output:
>
> 00-INDEX | 2 --
> cciss.txt | 27 +++++++++++++--------------
> mkdev.cciss | 40 ----------------------------------------
> 3 files changed, 13 insertions(+), 56 deletions(-)
>
> Signed-off-by: James Nelson <[email protected]>
This is OK.
Signed-off-by: Mike Miller <[email protected]
>
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/Documentation/00-INDEX
> linux-2.6.10-rc2/Documentation/00-INDEX
> --- linux-2.6.10-rc2-original/Documentation/00-INDEX
> 2004-11-15 21:38:04.184988235 -0500
> +++ linux-2.6.10-rc2/Documentation/00-INDEX 2004-11-16
> 17:29:28.213406296 -0500
> @@ -174,8 +174,6 @@
> - info on typical Linux memory problems.
> mips/
> - directory with info about Linux on MIPS architecture.
> -mkdev.cciss
> - - script to make /dev entries for SMART controllers
> (see cciss.txt).
> mono.txt
> - how to execute Mono-based .NET binaries with the help
> of BINFMT_MISC.
> moxa-smartio
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/Documentation/cciss.txt
> linux-2.6.10-rc2/Documentation/cciss.txt
> --- linux-2.6.10-rc2-original/Documentation/cciss.txt
> 2004-10-18 17:53:21.000000000 -0400
> +++ linux-2.6.10-rc2/Documentation/cciss.txt 2004-11-16
> 17:17:48.093924758 -0500
> @@ -17,25 +17,27 @@
> * SA 6422
> * SA V100
>
> -If nodes are not already created in the /dev/cciss directory
> +If nodes are not already created in the /dev/cciss
> directory, run as root:
>
> -# mkdev.cciss [ctlrs]
> -
> -Where ctlrs is the number of controllers you have (defaults
> to 1 if not
> -specified).
> +# cd /dev
> +# ./MAKEDEV cciss
>
> Device Naming:
> --------------
>
> -You need some entries in /dev for the cciss device. The
> mkdev.cciss script
> +You need some entries in /dev for the cciss device. The
> MAKEDEV script
> can make device nodes for you automatically. Currently the
> device setup
> is as follows:
>
> Major numbers:
> 104 cciss0
> 105 cciss1
> - 106 cciss2
> - etc...
> + 106 cciss2
> + 105 cciss3
> + 108 cciss4
> + 109 cciss5
> + 110 cciss6
> + 111 cciss7
>
> Minor numbers:
> b7 b6 b5 b4 b3 b2 b1 b0
> @@ -45,7 +47,7 @@
> |
> +-------------------- Logical Volume number
>
> -The suggested device naming scheme is:
> +The device naming scheme is:
> /dev/cciss/c0d0 Controller 0, disk 0,
> whole device
> /dev/cciss/c0d0p1 Controller 0, disk 0, partition 1
> /dev/cciss/c0d0p2 Controller 0, disk 0, partition 2
> @@ -117,16 +119,13 @@
>
> Note that the naming convention of the /proc filesystem entries
> contains a number in addition to the driver name. (E.g. "cciss0"
> -instead of just "cciss" which you might expect.) This is because
> -of changes to the 2.4 kernel PCI interface related to PCI hot plug
> -that imply the driver must register with the SCSI mid layer once per
> -adapter instance rather than once per driver.
> +instead of just "cciss" which you might expect.)
>
> Note: ONLY sequential access devices and medium changers are
> presented
> as SCSI devices to the SCSI mid layer by the cciss driver.
> Specifically,
> physical SCSI disk drives are NOT presented to the SCSI mid
> layer. The
> physical SCSI disk drives are controlled directly by the
> array controller
> -hardware and it is important to prevent the OS from
> attempting to directly
> +hardware and it is important to prevent the kernel from
> attempting to directly
> access these devices too, as if the array controller were
> merely a SCSI
> controller in the same way that we are allowing it to access
> SCSI tape drives.
>
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/Documentation/mkdev.cciss
> linux-2.6.10-rc2/Documentation/mkdev.cciss
> --- linux-2.6.10-rc2-original/Documentation/mkdev.cciss
> 2004-10-18 17:53:13.000000000 -0400
> +++ linux-2.6.10-rc2/Documentation/mkdev.cciss
> 1969-12-31 19:00:00.000000000 -0500
> @@ -1,40 +0,0 @@
> -#!/bin/sh
> -# Script to create device nodes for SMART array controllers
> -# Usage:
> -# mkdev.cciss [num controllers] [num log volumes] [num partitions]
> -#
> -# With no arguments, the script assumes 1 controller, 16
> logical volumes,
> -# and 16 partitions/volume, which is adequate for most
> configurations.
> -#
> -# If you had 5 controllers and were planning on no more than
> 4 logical volumes
> -# each, using a maximum of 8 partitions per volume, you could say:
> -#
> -# mkdev.cciss 5 4 8
> -#
> -# Of course, this has no real benefit over "mkdev.cciss 5"
> except that it
> -# doesn't create so many device nodes in /dev/cciss.
> -
> -NR_CTLR=${1-1}
> -NR_VOL=${2-16}
> -NR_PART=${3-16}
> -
> -if [ ! -d /dev/cciss ]; then
> - mkdir -p /dev/cciss
> -fi
> -
> -C=0; while [ $C -lt $NR_CTLR ]; do
> - MAJ=`expr $C + 104`
> - D=0; while [ $D -lt $NR_VOL ]; do
> - P=0; while [ $P -lt $NR_PART ]; do
> - MIN=`expr $D \* 16 + $P`
> - if [ $P -eq 0 ]; then
> - mknod /dev/cciss/c${C}d${D} b $MAJ $MIN
> - else
> - mknod
> /dev/cciss/c${C}d${D}p${P} b $MAJ $MIN
> - fi
> - P=`expr $P + 1`
> - done
> - D=`expr $D + 1`
> - done
> - C=`expr $C + 1`
> -done
>
> Correct mailing list address in cpqarray source code.
>
> diffstat output:
>
> cpqarray.c | 2 +-
> cpqarray.h | 2 +-
> ida_cmd.h | 2 +-
> ida_ioctl.h | 2 +-
> smart1,2.h | 2 +-
> 5 files changed, 5 insertions(+), 5 deletions(-)
>
> Signed-off-by: James Nelson <[email protected]>
This is OK.
Signed-off-by: Mike Miller <[email protected]>
>
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/drivers/block/cpqarray.c
> linux-2.6.10-rc2/drivers/block/cpqarray.c
> --- linux-2.6.10-rc2-original/drivers/block/cpqarray.c
> 2004-11-15 21:38:15.707432667 -0500
> +++ linux-2.6.10-rc2/drivers/block/cpqarray.c 2004-11-16
> 17:26:45.127423447 -0500
> @@ -16,7 +16,7 @@
> * along with this program; if not, write to the Free Software
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> *
> - * Questions/Comments/Bugfixes to
> [email protected]
> + * Questions/Comments/Bugfixes to [email protected]
> *
> */
> #include <linux/config.h> /* CONFIG_PROC_FS */
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/drivers/block/cpqarray.h
> linux-2.6.10-rc2/drivers/block/cpqarray.h
> --- linux-2.6.10-rc2-original/drivers/block/cpqarray.h
> 2004-10-18 17:54:37.000000000 -0400
> +++ linux-2.6.10-rc2/drivers/block/cpqarray.h 2004-11-16
> 17:26:24.440216288 -0500
> @@ -16,7 +16,7 @@
> * along with this program; if not, write to the Free Software
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> *
> - * Questions/Comments/Bugfixes to [email protected]
> + * Questions/Comments/Bugfixes to [email protected]
> *
> * If you want to make changes, improve or add
> functionality to this
> * driver, you'll probably need the Compaq Array
> Controller Interface
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/drivers/block/ida_cmd.h
> linux-2.6.10-rc2/drivers/block/ida_cmd.h
> --- linux-2.6.10-rc2-original/drivers/block/ida_cmd.h
> 2004-10-18 17:53:45.000000000 -0400
> +++ linux-2.6.10-rc2/drivers/block/ida_cmd.h 2004-11-16
> 17:26:12.178871611 -0500
> @@ -16,7 +16,7 @@
> * along with this program; if not, write to the Free Software
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> *
> - * Questions/Comments/Bugfixes to [email protected]
> + * Questions/Comments/Bugfixes to [email protected]
> *
> */
> #ifndef ARRAYCMD_H
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/drivers/block/ida_ioctl.h
> linux-2.6.10-rc2/drivers/block/ida_ioctl.h
> --- linux-2.6.10-rc2-original/drivers/block/ida_ioctl.h
> 2004-10-18 17:54:08.000000000 -0400
> +++ linux-2.6.10-rc2/drivers/block/ida_ioctl.h
> 2004-11-16 17:25:57.796813237 -0500
> @@ -16,7 +16,7 @@
> * along with this program; if not, write to the Free Software
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> *
> - * Questions/Comments/Bugfixes to [email protected]
> + * Questions/Comments/Bugfixes to [email protected]
> *
> */
> #ifndef IDA_IOCTL_H
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/drivers/block/smart1,2.h
> linux-2.6.10-rc2/drivers/block/smart1,2.h
> --- linux-2.6.10-rc2-original/drivers/block/smart1,2.h
> 2004-10-18 17:54:37.000000000 -0400
> +++ linux-2.6.10-rc2/drivers/block/smart1,2.h 2004-11-16
> 17:25:48.198109094 -0500
> @@ -16,7 +16,7 @@
> * along with this program; if not, write to the Free Software
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> *
> - * Questions/Comments/Bugfixes to [email protected]
> + * Questions/Comments/Bugfixes to [email protected]
> *
> * If you want to make changes, improve or add
> functionality to this
> * driver, you'll probably need the Compaq Array
> Controller Interface
>
> Correct mailing list address in cciss source code.
>
> diffstat output:
>
> cciss.c | 2 +-
> cciss_scsi.c | 2 +-
> cciss_scsi.h | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> Signed-off-by: James Nelson <[email protected]>
This is OK.
Signed-off-by: Mike Miller <[email protected]>
>
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/drivers/block/cciss.c
> linux-2.6.10-rc2/drivers/block/cciss.c
> --- linux-2.6.10-rc2-original/drivers/block/cciss.c
> 2004-11-15 21:38:15.683435907 -0500
> +++ linux-2.6.10-rc2/drivers/block/cciss.c 2004-11-16
> 17:27:02.056138014 -0500
> @@ -16,7 +16,7 @@
> * along with this program; if not, write to the Free Software
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> *
> - * Questions/Comments/Bugfixes to
> [email protected]
> + * Questions/Comments/Bugfixes to [email protected]
> *
> */
>
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/drivers/block/cciss_scsi.c
> linux-2.6.10-rc2/drivers/block/cciss_scsi.c
> --- linux-2.6.10-rc2-original/drivers/block/cciss_scsi.c
> 2004-11-15 21:38:15.685435637 -0500
> +++ linux-2.6.10-rc2/drivers/block/cciss_scsi.c
> 2004-11-16 17:47:28.924506697 -0500
> @@ -16,7 +16,7 @@
> * along with this program; if not, write to the Free Software
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> *
> - * Questions/Comments/Bugfixes to [email protected]
> + * Questions/Comments/Bugfixes to [email protected]
> *
> * Author: Stephen M. Cameron
> */
> diff -urN --exclude='*~'
> linux-2.6.10-rc2-original/drivers/block/cciss_scsi.h
> linux-2.6.10-rc2/drivers/block/cciss_scsi.h
> --- linux-2.6.10-rc2-original/drivers/block/cciss_scsi.h
> 2004-10-18 17:54:22.000000000 -0400
> +++ linux-2.6.10-rc2/drivers/block/cciss_scsi.h
> 2004-11-16 17:47:21.868459287 -0500
> @@ -16,7 +16,7 @@
> * along with this program; if not, write to the Free Software
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> *
> - * Questions/Comments/Bugfixes to [email protected]
> + * Questions/Comments/Bugfixes to [email protected]
> *
> */
> #ifdef CONFIG_CISS_SCSI_TAPE
>