2005-01-12 10:08:59

by Atro Tossavainen

[permalink] [raw]
Subject: CCISS problems continue with 2.4.28

(Attn mikem, really.)

Upgraded the Proliant DL380 (see lkml traffic from mid-November 2004)
to 2.4.28. The cciss partition lookup freezes just the same as before.
2.4.26 is still the most recent 2.4 series kernel that will boot.

--
Atro Tossavainen (Mr.) / The Institute of Biotechnology at
Systems Analyst, Techno-Amish & / the University of Helsinki, Finland,
+358-9-19158939 UNIX Dinosaur / employs me, but my opinions are my own.
< URL : http : / / www . helsinki . fi / %7E atossava / > NO FILE ATTACHMENTS


2005-01-12 14:03:04

by Marcelo Tosatti

[permalink] [raw]
Subject: Re: CCISS problems continue with 2.4.28

On Wed, Jan 12, 2005 at 12:08:56PM +0200, Atro Tossavainen wrote:
> (Attn mikem, really.)
>
> Upgraded the Proliant DL380 (see lkml traffic from mid-November 2004)
> to 2.4.28. The cciss partition lookup freezes just the same as before.
> 2.4.26 is still the most recent 2.4 series kernel that will boot.

Mike?

2005-01-14 21:08:57

by Mike Miller (OS Dev)

[permalink] [raw]
Subject: Re: CCISS problems continue with 2.4.28

On Wed, Jan 12, 2005 at 08:50:45AM -0200, Marcelo Tosatti wrote:
> On Wed, Jan 12, 2005 at 12:08:56PM +0200, Atro Tossavainen wrote:
> > (Attn mikem, really.)
> >
> > Upgraded the Proliant DL380 (see lkml traffic from mid-November 2004)
> > to 2.4.28. The cciss partition lookup freezes just the same as before.
> > 2.4.26 is still the most recent 2.4 series kernel that will boot.
>
> Mike?
Sorry, I let this one drop though the cracks. Try booting with acpi=off. It appears the interrupt is not being detected properly. If acpi=off works try updating the system ROM. We have been known to have buggy acpi tables.

Again, sorry for the delay,
mikem

2005-04-08 09:34:19

by Atro Tossavainen

[permalink] [raw]
Subject: Re: CCISS problems continue with 2.4.28

Mike,

On Fri, 14 Jan 2005 15:07:50 -0600, you wrote:

> Sorry, I let this one drop though the cracks. Try booting with acpi=off.
> It appears the interrupt is not being detected properly. If acpi=off works
> try updating the system ROM. We have been known to have buggy acpi tables.

acpi=off works, but the 09/15/2004 P29 flash update to the DL380 G3
(SP28809) doesn't make the problem go away.

--
Atro Tossavainen (Mr.) / The Institute of Biotechnology at
Systems Analyst, Techno-Amish & / the University of Helsinki, Finland,
+358-9-19158939 UNIX Dinosaur / employs me, but my opinions are my own.
< URL : http : / / www . helsinki . fi / %7E atossava / > NO FILE ATTACHMENTS