I have a problem with my bttv card, I get these error messages when I try to
access the TV device (and of course I can't watch TV) :
Feb 5 17:43:57 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
Feb 5 17:44:05 client last message repeated 4 times
Feb 5 17:44:48 client kernel: bttv0: timeout: drop=328 irq=3696/3696,
risc=1654f044, bits: HSYNC OFLOW FDSR
Feb 5 17:44:48 client kernel: bttv0: reset, reinitialize
Feb 5 17:44:48 client kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 5 17:44:48 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
Feb 5 17:45:26 client kernel: bttv0: timeout: drop=608 irq=4243/4243,
risc=1653406c, bits: HSYNC OFLOW FDSR
Feb 5 17:45:26 client kernel: bttv0: reset, reinitialize
Feb 5 17:45:26 client kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 5 17:45:26 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
Feb 5 17:46:06 client kernel: bttv0: timeout: drop=889 irq=4815/4815,
risc=16534034, bits: HSYNC OFLOW FDSR
Feb 5 17:46:06 client kernel: bttv0: reset, reinitialize
Feb 5 17:46:06 client kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 5 17:46:06 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
Feb 5 17:47:10 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
Feb 5 17:47:17 client last message repeated 3 times
Feb 5 17:47:26 client kernel: bttv0: timeout: drop=1497 irq=5994/5994,
risc=1bfec03c, bits: VSYNC HSYNC OFLOW FBUS FDSR
Feb 5 17:47:26 client kernel: bttv0: reset, reinitialize
Feb 5 17:47:26 client kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 5 17:47:26 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
Feb 5 17:48:41 client kernel: bttv0: timeout: drop=2035 irq=7073/7073,
risc=140a6044, bits: HSYNC OFLOW FDSR
Feb 5 17:48:41 client kernel: bttv0: reset, reinitialize
Feb 5 17:48:41 client kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 5 17:48:41 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
Feb 5 17:48:52 client kernel: bttv0: timeout: drop=2118 irq=7234/7234,
risc=138f303c, bits: HSYNC OFLOW FDSR
Feb 5 17:48:52 client kernel: bttv0: reset, reinitialize
Feb 5 17:48:52 client kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 5 17:48:52 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
Feb 5 17:48:59 client kernel: bttv0: timeout: drop=2170 irq=7332/7332,
risc=1bfec03c, bits: VSYNC HSYNC OFLOW FBUS FDSR
Feb 5 17:48:59 client kernel: bttv0: reset, reinitialize
Feb 5 17:48:59 client kernel: bttv0: PLL: 28636363 => 35468950 . ok
Feb 5 17:48:59 client kernel: tuner: i2c i/o error: rc == -121 (should be 4)
I have no problem with 2.6.10 (I don't test other kernel version between
2.6.10 and 2.6.11-rc3-mm1)
See attachment for the kernel configuration
jjluza wrote:
> I have a problem with my bttv card, I get these error messages when I try to
> access the TV device (and of course I can't watch TV) :
I am having bttv problems with vanilla -rc3. Does it work for you?
--
Eyal Lebedinsky ([email protected]) <http://samba.org/eyal/>
attach .zip as .dat
Eyal Lebedinsky wrote
>
> I am having bttv problems with vanilla -rc3. Does it work for you?
I don't know, as I said I didn't test kernel between 2.6.10 and
2.6.11-rc3-mm1.
Sorry.
If I have time enough later, I can test 2.6.11-rc3.
Since I don't really know if it's the good place to talk about that, I decided
to report this bug on bugzilla too. Maybe you can post your problem here :
http://bugzilla.kernel.org/show_bug.cgi?id=4171
Thanks.
jjluza wrote:
> Eyal Lebedinsky wrote
>
>>I am having bttv problems with vanilla -rc3. Does it work for you?
>
>
> I don't know, as I said I didn't test kernel between 2.6.10 and
> 2.6.11-rc3-mm1.
> Sorry.
> If I have time enough later, I can test 2.6.11-rc3.
> Since I don't really know if it's the good place to talk about that, I decided
> to report this bug on bugzilla too. Maybe you can post your problem here :
> http://bugzilla.kernel.org/show_bug.cgi?id=4171
Other people with similar problems reported that the attached patch from
Gerd Knorr fixed the problem for them.
If you try it out and it fixes the problem for you, don't forget to
report the fix in bugzilla too, so that others can use that info (and
prevent having open bugs there for things that are already fixed :).
I hope this helps,
--
Paulo Marques - http://www.grupopie.com
All that is necessary for the triumph of evil is that good men do nothing.
Edmund Burke (1729 - 1797)
Paulo Marques wrote:
> jjluza wrote:
>
>> Eyal Lebedinsky wrote
>>
>>> I am having bttv problems with vanilla -rc3. Does it work for you?
>>
>>
>>
>> I don't know, as I said I didn't test kernel between 2.6.10 and
>> 2.6.11-rc3-mm1.
>> Sorry.
>> If I have time enough later, I can test 2.6.11-rc3.
>> Since I don't really know if it's the good place to talk about that, I
>> decided to report this bug on bugzilla too. Maybe you can post your
>> problem here :
>> http://bugzilla.kernel.org/show_bug.cgi?id=4171
>
>
> Other people with similar problems reported that the attached patch from
> Gerd Knorr fixed the problem for them.
-ENOATTACHMENT :P
--
Paulo Marques - http://www.grupopie.com
All that is necessary for the triumph of evil is that good men do nothing.
Edmund Burke (1729 - 1797)