I recently upgraded my laptop to 2.6.11.3 and removed the notsc boot
option I added a fairly long time ago to see if things worked properly
without it now. It seems to work, except that after a resume I get
an awful lot of these messages:
Mar 15 09:53:04 typhoon kernel: rtc: lost some interrupts at 1024Hz.
Mar 15 09:53:06 typhoon last message repeated 103 times
and indeed looking at /proc/interrupts interrupt 8 is not getting hit.
Wichert.
--
Wichert Akkerman <[email protected]> It is simple to make things.
http://www.wiggy.net/ It is hard to make things simple.
On ?t 15-03-05 23:00:31, Wichert Akkerman wrote:
> I recently upgraded my laptop to 2.6.11.3 and removed the notsc boot
> option I added a fairly long time ago to see if things worked properly
> without it now. It seems to work, except that after a resume I get
> an awful lot of these messages:
>
> Mar 15 09:53:04 typhoon kernel: rtc: lost some interrupts at 1024Hz.
> Mar 15 09:53:06 typhoon last message repeated 103 times
>
> and indeed looking at /proc/interrupts interrupt 8 is not getting hit.
Can you add code to free_irq 8 before suspend and reacquire it after
resume? If it helps then we have some interrupt routing problems...
Pavel
--
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!