One line summary of the problem:
Buffer I/O error on device hdg1, system freeze.
Full description of the problem/report:
the following error showed up in dmesg today:
hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdg: dma_intr: error=0x40 { UncorrectableError }, LBAsect=262311, high=0, low=262311, sector=262311
ide: failed opcode was: unknown
end_request: I/O error, dev hdg, sector 262311
Buffer I/O error on device hdg1, logical block 131124
fscking this disk freezes the entire system.
The disk was remounted ro afterwards.
Disk itself is ok. Is a new one.
Remark: average temperature of the system raised during the last 5 day
from 21 deg C to 23 deg C as spring is approaching.
Last summer there have been a lot of problems with the pdc at even
higher temperatures using kernel 2.4.26 to 2.4.xx.
Keywords (i.e., modules, networking, kernel):
PDC20269: IDE controller, CONFIG_BLK_DEV_PDC202XX_OLD=y, CONFIG_BLK_DEV_PDC202XX_NEW=y
/proc/version:
--------------
Linux version 2.6.11serviceservice (root@service) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sat Mar 5 16:31:18 CET 2005
Output of Oops.. message:
see above.
A small shell script or example program which triggers the problem:
/usr/src/linux/scripts/ver_linux:
---------------------------------
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux service 2.6.11serviceservice #1 Sat Mar 5 16:31:18 CET 2005 i686 GNU/Linux
Gnu C 2.95.4
Gnu make 3.79.1
binutils 2.12.90.0.1
util-linux 2.11n
mount 2.12a
module-init-tools 3.1
e2fsprogs 1.35
reiserfsprogs reiserfsck:
reiser4progs fsck.reiser4:
quota-tools 3.04.
PPP 2.4.1
isdn4k-utils 3.5
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.4
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.2.1
Modules Loaded usbcore 8250 serial_core parport_pc lp parport bridge dm_mod hisax_isac hisax isdn 8139too 3c59x mii
/proc/cpuinfo:
--------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 551.398
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1089.53
/proc/modules:
--------------
usbcore 114504 0 - Live 0xd098f000
8250 23200 2 - Live 0xd0933000
serial_core 21664 1 8250, Live 0xd092c000
parport_pc 39072 1 - Live 0xd08cd000
lp 12032 0 - Live 0xd0899000
parport 35776 2 parport_pc,lp, Live 0xd08fc000
bridge 50900 0 - Live 0xd091e000
dm_mod 57728 0 - Live 0xd090e000
hisax_isac 12372 0 - Live 0xd08c8000
hisax 198272 1 hisax_isac, Live 0xd093a000
isdn 135872 1 hisax, Live 0xd08d9000
8139too 25376 0 - Live 0xd08a8000
3c59x 40392 0 - Live 0xd089d000
mii 4992 2 8139too,3c59x, Live 0xd088c000
/proc/ioports:
--------------
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0290-0297 : pnp 00:0f
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0778-077a : parport0
0cf8-0cff : PCI conf1
9400-9403 : 0000:00:0e.0
9800-987f : 0000:00:0e.0
a000-a0ff : 0000:00:0b.0
a000-a0ff : 8139too
a400-a40f : 0000:00:0a.0
a400-a407 : ide2
a408-a40f : ide3
a800-a803 : 0000:00:0a.0
a802-a802 : ide3
b000-b007 : 0000:00:0a.0
b000-b007 : ide3
b400-b403 : 0000:00:0a.0
b800-b807 : 0000:00:0a.0
d000-d0ff : 0000:00:09.0
d000-d0ff : 8139too
d400-d41f : 0000:00:04.2
d800-d80f : 0000:00:04.1
d800-d807 : ide0
d808-d80f : ide1
e400-e43f : 0000:00:04.3
e400-e43f : motherboard
e400-e403 : PM1a_EVT_BLK
e404-e405 : PM1a_CNT_BLK
e408-e40b : PM_TMR
e40c-e40f : GPE0_BLK
e800-e81f : 0000:00:04.3
e800-e80f : motherboard
/proc/iomem:
------------
00000000-0009e7ff : System RAM
0009e800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000ce7ff : Adapter ROM
000f0000-000fffff : System ROM
00100000-0fffbfff : System RAM
00100000-0035ecd9 : Kernel code
0035ecda-004df71f : Kernel data
0fffc000-0fffefff : ACPI Tables
0ffff000-0fffffff : ACPI Non-volatile Storage
e2800000-e280007f : 0000:00:0e.0
e3000000-e3ffffff : 0000:00:0c.0
e4000000-e40000ff : 0000:00:0b.0
e4000000-e40000ff : 8139too
e4800000-e4803fff : 0000:00:0a.0
e5000000-e50000ff : 0000:00:09.0
e5000000-e50000ff : 8139too
e6000000-e6ffffff : 0000:00:0c.0
e7800000-e7bfffff : 0000:00:00.0
ffff0000-ffffffff : reserved
lspci -vvv:
-----------
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 8024
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e7800000 (32-bit, prefetchable) [size=4M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: e5c00000-e5bfffff
Prefetchable memory behind bridge: e7800000-e77fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B+
00:04.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:04.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]
00:04.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at d400 [size=32]
00:04.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Unknown mass storage controller: Promise Technology, Inc.: Unknown device 4d69 (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc.: Unknown device 4d68
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at e4800000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at e4000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 VGA compatible controller: NVidia / SGS Thomson (Joint Venture) Riva128 (rev 10) (prog-if 00 [VGA])
Subsystem: Diamond Multimedia Systems Viper V330
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e6000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at e5c00000 [disabled] [size=4M]
00:0e.0 Network controller: Elsa AG QuickStep 1000 (rev 01)
Subsystem: Elsa AG QuickStep 1000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: Memory at e2800000 (32-bit, non-prefetchable) [disabled] [size=128]
Region 1: I/O ports at 9800 [disabled] [size=128]
Region 3: I/O ports at 9400 [disabled] [size=4]
/proc/scsi/scsi:
----------------
Attached devices:
Other information that might be relevant to the problem:
# hdparm -I /dev/hdg
/dev/hdg:
non-removable ATA device, with non-removable media
Model Number: WDC WD1600JB-00GVA0
Serial Number: WD-WMAL92033559
Firmware Revision: 08.02D08
Standards:
Supported: 1 2 3 4 5 6
Likely used: 6
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
bytes/track: 57600 (obsolete)
bytes/sector: 600 (obsolete)
current sector capacity: 4128705
LBA user addressable sectors = 268435455
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 8192.0kB ECC bytes: 74 Queue depth: 1
Standby timer values: spec'd by standard, with device specific minimum
r/w multiple sector transfer: Max = 16 Current = 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* look-ahead
* write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
/proc/cmdline:
--------------
auto BOOT_IMAGE=k2611 ro root=301 lp=none apm=off acpi=on debug panic=5
/proc/interrupts:
-----------------
CPU0
0: 105625 XT-PIC timer
1: 7 XT-PIC i8042
2: 0 XT-PIC cascade
3: 95 XT-PIC serial
5: 7 XT-PIC ide3
7: 1 XT-PIC parport0
8: 3 XT-PIC rtc
9: 0 XT-PIC acpi, eth0
11: 603 XT-PIC eth1
12: 92 XT-PIC i8042
14: 7693 XT-PIC ide0
15: 11 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
cat /proc/config.gz | grep "[y|m]":
-----------------------------------
# Automatically generated make config: don't edit
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
# Code maturity level options
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
# Loadable module support
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
# Processor type and features
CONFIG_X86_PC=y
CONFIG_MPENTIUMIII=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# Firmware Drivers
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
# Power management options (ACPI, APM)
CONFIG_PM=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# APM (Advanced Power Management) BIOS Support
CONFIG_APM=m
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
# CPU Frequency scaling
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_PCMCIA_PROBE=y
# Executable file formats
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# Memory Technology Devices (MTD)
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_1284=y
# Plug and Play support
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
# Please see Documentation/ide.txt for help/info on IDE drives
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_QLA2XXX=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_IEEE1394=m
# Subsystem Options
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=m
CONFIG_NETFILTER=y
CONFIG_BRIDGE_NETFILTER=y
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_LLC=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
CONFIG_IRTTY_SIR=m
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_IRPORT_SIR=m
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
# Tulip family network device support
CONFIG_NET_ISA=y
CONFIG_NE2000=m
CONFIG_NET_PCI=y
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# Wireless LAN (non-hamradio)
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
CONFIG_PRISM54=m
CONFIG_NET_WIRELESS=y
CONFIG_PLIP=m
CONFIG_PPP=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# ISDN subsystem
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
# ISDN feature submodules
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m
CONFIG_ISDN_DRV_HISAX=m
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DEBUG=y
# HiSax PCMCIA card service modules
# HiSax sub driver modules
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_ISDN_DRV_ICN=m
# CAPI subsystem
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIDRV=m
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
# Telephony Support
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_NVRAM=y
CONFIG_RTC=y
# Ftape, the floppy tape device driver
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_MWAVE=m
CONFIG_HANGCHECK_TIMER=y
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
# I2C Algorithms
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM80=m
CONFIG_W1=m
CONFIG_W1_DS9490=m
CONFIG_W1_THERM=m
# Multimedia devices
CONFIG_VIDEO_DEV=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# Console display driver support
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ENS1371=m
# Open Sound System
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_SB=m
CONFIG_SOUND_AWE32_SYNTH=m
CONFIG_USB=m
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_AUDIO=m
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_WACOM=m
# USB Imaging devices
CONFIG_USB_MICROTEK=m
# USB Multimedia devices
CONFIG_USB_DABUSB=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_STV680=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_USBNET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
CONFIG_USB_EMI26=m
CONFIG_USB_LCD=m
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
CONFIG_USB_GADGET_DUALSPEED=y
# File systems
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=y
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
# DOS/FAT/NT Filesystems
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
CONFIG_NTFS_RW=y
# Pseudo filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
# Miscellaneous filesystems
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_CRAMFS=y
CONFIG_HPFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# Network File Systems
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_CIFS=m
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
# Partition Types
CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# Security options
# Cryptographic options
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_TEST=y
# Hardware crypto devices
# Library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
Other notes, patches, fixes, workarounds:
uptime:
-------
16:20:42 up 1 min, 1 user, load average: 0.81, 0.31, 0.11
free:
-----
total used free shared buffers cached
Mem: 255044 191172 63872 0 23536 101352
-/+ buffers/cache: 66284 188760
Swap: 779112 0 779112
dmesg:
------
efefefefefefefe
pass
test 2 (160 bit key):
03030303030303030303030303030303
pass
test 3 (224 bit key):
24242424242424242424242424242424
pass
test 4 (256 bit key):
25252525252525252525252525252525
pass
test 5 (320 bit key):
35353535353535353535353535353535
pass
testing anubis ECB decryption across pages (chunking)
testing anubis CBC encryption
test 1 (128 bit key):
6dc5daa2267d626f08b7528e6e6e869086d8b56f985e8a664f1f78a1bb37f1be
pass
test 2 (320 bit key):
a52c856f9cbaa0979ec6840f172107eea2bc0698c64bda752eaabe58ce015bc7
pass
testing anubis CBC encryption across pages (chunking)
testing anubis CBC decryption
test 1 (128 bit key):
fefefefefefefefefefefefefefefefefefefefefefefefefefefefefefefefe
pass
test 2 (320 bit key):
3535353535353535353535353535353535353535353535353535353535353535
pass
testing anubis CBC decryption across pages (chunking)
testing sha384
test 1:
cb00753f45a35e8bb5a03d699ac65007272c32ab0eded1631a8b605a43ff5bed8086072ba1e7cc2358baeca134c825a7
pass
test 2:
3391fdddfc8dc7393707a65b1b4709397cf8b1d162af05abfe8f450de5f36bc6b0455a8520bc4e6f5fe95b1fe3c8452b
pass
test 3:
09330c33f71147e83d192fc782cd1b4753111b173b3b05d22fa08086e3b0f712fcc7c71a557e2db966c3e9fa91746039
pass
test 4:
3d208973ab3508dbbd7e2c2862ba290ad3010e4978c198dc4d8fd014e582823a89e16f9b2a7bbc1ac938e2d199e8bea4
pass
testing sha384 across pages
test 1:
3d208973ab3508dbbd7e2c2862ba290ad3010e4978c198dc4d8fd014e582823a89e16f9b2a7bbc1ac938e2d199e8bea4
pass
testing sha512
test 1:
ddaf35a193617abacc417349ae20413112e6fa4e89a97ea20a9eeee64b55d39a2192992a274fc1a836ba3c23a3feebbd454d4423643ce80e2a9ac94fa54ca49f
pass
test 2:
204a8fc6dda82f0a0ced7beb8e08a41657c16ef468b228a8279be331a703c33596fd15c13b1b07f9aa1d3bea57789ca031ad85c7a71dd70354ec631238ca3445
pass
test 3:
8e959b75dae313da8cf4f72814fc143f8f7779c6eb9f7fa17299aeadb6889018501d289e4900f7e4331b99dec4b5433ac7d329eeb6dd26545e96e55b874be909
pass
test 4:
930d0cefcb30ff1133b6898121f1cf3d27578afcafe8677c5257cf069911f75d8f5831b56ebfda67b278e66dff8b84fe2b2870f742a580d8edb41987232850c9
pass
testing sha512 across pages
test 1:
930d0cefcb30ff1133b6898121f1cf3d27578afcafe8677c5257cf069911f75d8f5831b56ebfda67b278e66dff8b84fe2b2870f742a580d8edb41987232850c9
pass
testing wp512
test 1:
19fa61d75522a4669b44e39c1d2e1726c530232130d407f89afee0964997f7a73e83be698b288febcf88e3e03c4f0757ea8964e59b63d93708b138cc42a66eb3
pass
test 2:
8aca2602792aec6f11a67206531fb7d7f0dff59413145e6973c45001d0087b42d11bc645413aeff63a42391a39145a591a92200d560195e53b478584fdae231a
pass
test 3:
4e2448a4c6f486bb16b6562c73b4020bf3043e3a731bce721ae1b303d97e6d4c7181eebdb6c57e277d0e34957114cbd6c797fc9d95d8b582d225292076d4eef5
pass
test 4:
378c84a4126e2dc6e56dcc7458377aac838d00032230f53ce1f5700c0ffb4d3b8421557659ef55c106b4b52ac5a4aaa692ed920052838f3362e86dbd37a8903e
pass
test 5:
f1d754662636ffe92c82ebb9212a484a8d38631ead4238f5442ee13b8054e41b08bf2a9251c30b6a0b8aae86177ab4a6f68f673e7207865d5d9819a3dba4eb3b
pass
test 6:
dc37e008cf9ee69bf11f00ed9aba26901dd7c28cdec066cc6af42e40f82f3a1e08eba26629129d8fb7cb57211b9281a65517cc879d7b962142c65f5a7af01467
pass
test 7:
466ef18babb0154d25b9d38a6414f5c08784372bccb204d6549c4afadb6014294d5bd8df2a6c44e538cd047b2681a51a2c60481e88c5a20b2c2a80cf3a9a083b
pass
test 8:
2a987ea40f917061f5d6f0a0e4644f488a7a5a52deee656207c562f988e95c6916bdc8031bc5be1b7b947639fe050b56939baaa0adff9ae6745b7b181c3be3fd
pass
testing wp512 across pages
testing wp384
test 1:
19fa61d75522a4669b44e39c1d2e1726c530232130d407f89afee0964997f7a73e83be698b288febcf88e3e03c4f0757
pass
test 2:
8aca2602792aec6f11a67206531fb7d7f0dff59413145e6973c45001d0087b42d11bc645413aeff63a42391a39145a59
pass
test 3:
4e2448a4c6f486bb16b6562c73b4020bf3043e3a731bce721ae1b303d97e6d4c7181eebdb6c57e277d0e34957114cbd6
pass
test 4:
378c84a4126e2dc6e56dcc7458377aac838d00032230f53ce1f5700c0ffb4d3b8421557659ef55c106b4b52ac5a4aaa6
pass
test 5:
f1d754662636ffe92c82ebb9212a484a8d38631ead4238f5442ee13b8054e41b08bf2a9251c30b6a0b8aae86177ab4a6
pass
test 6:
dc37e008cf9ee69bf11f00ed9aba26901dd7c28cdec066cc6af42e40f82f3a1e08eba26629129d8fb7cb57211b9281a6
pass
test 7:
466ef18babb0154d25b9d38a6414f5c08784372bccb204d6549c4afadb6014294d5bd8df2a6c44e538cd047b2681a51a
pass
test 8:
2a987ea40f917061f5d6f0a0e4644f488a7a5a52deee656207c562f988e95c6916bdc8031bc5be1b7b947639fe050b56
pass
testing wp384 across pages
testing wp256
test 1:
19fa61d75522a4669b44e39c1d2e1726c530232130d407f89afee0964997f7a7
pass
test 2:
8aca2602792aec6f11a67206531fb7d7f0dff59413145e6973c45001d0087b42
pass
test 3:
4e2448a4c6f486bb16b6562c73b4020bf3043e3a731bce721ae1b303d97e6d4c
pass
test 4:
378c84a4126e2dc6e56dcc7458377aac838d00032230f53ce1f5700c0ffb4d3b
pass
test 5:
f1d754662636ffe92c82ebb9212a484a8d38631ead4238f5442ee13b8054e41b
pass
test 6:
dc37e008cf9ee69bf11f00ed9aba26901dd7c28cdec066cc6af42e40f82f3a1e
pass
test 7:
466ef18babb0154d25b9d38a6414f5c08784372bccb204d6549c4afadb601429
pass
test 8:
2a987ea40f917061f5d6f0a0e4644f488a7a5a52deee656207c562f988e95c69
pass
testing wp256 across pages
testing deflate compression
test 1:
f3cacfcc53282d56c8cb2f5748cc4b5128ce482c4a5528c9485528ce4f2b290771bc082b0100
pass (ratio 70:38)
test 2:
5d8d310ec2301004bfb22fc81f10040989c2853f70b12ff824db67d947c1ef49681251ae7667d62719881ade85ab21f2085d161e20042dadf318a215852d69c4428323b66c89719befcf8b9fcf33ca2fed62a94c80ff13af5237ed0e526b5902d94ee87a761d0298fe8a8783a34f568ab89e8e5c57d3a079fa02
pass (ratio 191:122)
testing deflate decompression
test 1:
5468697320646f63756d656e7420646573637269626573206120636f6d7072657373696f6e206d6574686f64206261736564206f6e20746865204445464c415445636f6d7072657373696f6e20616c676f726974686d2e20205468697320646f63756d656e7420646566696e657320746865206170706c69636174696f6e206f6620746865204445464c41544520616c676f726974686d20746f20746865204950205061796c6f616420436f6d7072657373696f6e2050726f746f636f6c2e
pass (ratio 122:191)
test 2:
4a6f696e207573206e6f7720616e642073686172652074686520736f667477617265204a6f696e207573206e6f7720616e642073686172652074686520736f66747761726520
pass (ratio 38:70)
testing crc32c
testing crc32c initialized to 00000000: pass
testing crc32c setkey returns 12345678 : pass
testing crc32c using update/final:
0e2c157f:OK e980ebf6:OK de74bded:OK d579c862:OK ba979ad0:OK 2b29d913:OK
testing crc32c using incremental accumulator:
24c5d375:OK
testing crc32c using digest:
24c5d375:OK
pass
crc32c test complete
testing hmac_md5
test 1:
9294727a3638bb1c13f48ef8158bfc9d
pass
test 2:
750c783e6ab0b503eaa86e310a5db738
pass
test 3:
56be34521d144c88dbb8c733f0e8b3f6
pass
test 4:
697eaf0aca3a3aea3a75164746ffaa79
pass
test 5:
56461ef2342edc00f9bab995690efd4c
pass
test 6:
6b1ab7fe4bd7bf8f0b62e6ce61b9d0cd
pass
test 7:
6f630fad67cda0ee1fb1f562db3aa53e
pass
testing hmac_md5 across pages
test 1:
750c783e6ab0b503eaa86e310a5db738
pass
testing hmac_sha1
test 1:
b617318655057264e28bc0b6fb378c8ef146be00
pass
test 2:
effcdf6ae5eb2fa2d27416d5f184df9c259a7c79
pass
test 3:
125d7342b9ac11cd91a39af48aa17b4f63f175d3
pass
test 4:
4c9007f4026250c6bc8414f9bf50c86c2d7235da
pass
test 5:
4c1a03424b55e07fe7f27be1d58bb9324a9a5a04
pass
test 6:
aa4ae5e15272d00e95705637ce8a3b55ed402112
pass
test 7:
e8e99d0f45237d786d6bbaa7965c7808bbff1a91
pass
testing hmac_sha1 across pages
test 1:
effcdf6ae5eb2fa2d27416d5f184df9c259a7c79
pass
testing hmac_sha256
test 1:
a21b1f5d4cf4f73a4dd939750f7a066a7f98cc131cb16a6692759021cfab8181
pass
test 2:
104fdc1257328f08184ba73131c53caee698e36119421149ea8c712456697d30
pass
test 3:
470305fc7e40fe34d3eeb3e773d95aab73acf0fd060447a5eb4595bf33a9d1a3
pass
test 4:
198a607eb44bfbc69903a0f1cf2bbdc5ba0aa3f3d9ae3c1c7a3b1696a0b68cf7
pass
test 5:
5bdcc146bf60754e6a042426089575c75a003f089d2739839dec58b964ec3843
pass
test 6:
cdcb1220d1ecccea91e53aba3092f962e549fe6ce9ed7fdc43191fbde45c30b0
pass
test 7:
d4633c17f6fb8d744c66dee0f8f074556ec4af55ef07998541468eb49bd2e917
pass
test 8:
7546af01841fc09b1ab9c3749a5f1c17d4f589668a587b2700a9c97c1193cf42
pass
test 9:
6953025ed96f0c09f80a96f78e6538dbe2e7b820e3dd970e7ddd39091b32352f
pass
test 10:
6355ac22e890d0a3c8481a5ca4825bc884d3e7a1ff98a2fc2ac7d8e064c3b2e6
pass
testing hmac_sha256 across pages
test 1:
5bdcc146bf60754e6a042426089575c75a003f089d2739839dec58b964ec3843
pass
testing michael_mic
test 1:
82925c1ca1d130b8
pass
test 2:
434721ca40639b3f
pass
test 3:
e8f9becae97e5d29
pass
test 4:
90038fc6cf13c1db
pass
test 5:
d55e100510128986
pass
test 6:
0a942b124ecaa546
pass
testing michael_mic across pages
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [PS2M] at irq 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC35L040AVER07-0, ATA DISK drive
hdb: WDC WD1200JB-00DUA3, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: BCD-16X 1997-03-25, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PDC20269: IDE controller at PCI slot 0000:00:0a.0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
PDC20269: chipset revision 2
PDC20269: 100% native mode on irq 5
ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
Probing IDE interface ide3...
hdg: WDC WD1600JB-00GVA0, ATA DISK drive
ide3 at 0xb000-0xb007,0xa802 on irq 5
pnp: the driver 'ide' has been registered
Probing IDE interface ide2...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 66055244 sectors (33820 MB)
native capacity is 80418240 sectors (41174 MB)
hda: Host Protected Area disabled.
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1
hdb: max request size: 1024KiB
hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
hdb: cache flushes supported
/dev/ide/host0/bus0/target1/lun0: p1 p2
hdg: max request size: 1024KiB
hdg: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hdg: cache flushes supported
/dev/ide/host2/bus1/target0/lun0: p1
hdc: ATAPI 10X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
(fs/jbd/recovery.c, 255): journal_recover: JBD: recovery, exit status 0, recovered transactions 13460949 to 13461122
(fs/jbd/recovery.c, 257): journal_recover: JBD: Replayed 2353 and revoked 58/57 blocks
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 493136
ext3_orphan_cleanup: deleting unreferenced inode 493069
EXT3-fs: hda1: 2 orphan inodes deleted
EXT3-fs: recovery complete.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
Adding 779112k swap on /dev/hdb1. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:00:09.0 (0004 -> 0007)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 9 (level, low) -> IRQ 9
eth0: RealTek RTL8139 at 0xd0890000, 00:e0:7d:ef:8e:69, IRQ 9
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
PCI: Enabling device 0000:00:0b.0 (0004 -> 0007)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
eth1: RealTek RTL8139 at 0xd0892000, 00:e0:7d:ef:8e:4e, IRQ 11
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with journal data mode.
Bridge firewalling registered
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
eth0: link down
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth1: link up, 10Mbps, half-duplex, lpa 0x0000
eth1: Promiscuous mode enabled.
eth1: Promiscuous mode enabled.
eth1: Promiscuous mode enabled.
eth1: Promiscuous mode enabled.
eth1: Promiscuous mode enabled.
br0: port 2(eth1) entering learning state
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:01' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
lp0: using parport0 (interrupt-driven).
lp0: console ready
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
usbcore: registered new driver usbfs
usbcore: registered new driver hub
process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
process `snmpwalk' is using obsolete setsockopt SO_BSDCOMPAT
### EOF
### vim:tw=256:et:sts=2:st=2:sw=2:com+=b\:###:fo+=cqtr:tags=ctags:
--
A+
* N.Radtke@ * University of Stuttgart * icq / lc *
* http://www.Think-Future.de * dep.comp.science * 9336272/92045 *
:x UTM 32 0515651 5394088 :)
What I want to find out is -- do parrots know much about
Astro-Turf?
On Fri, 18 Mar 2005 16:29:45 +0100, [email protected]
<[email protected]> wrote:
>
>
> One line summary of the problem:
> Buffer I/O error on device hdg1, system freeze.
>
> Full description of the problem/report:
> the following error showed up in dmesg today:
>
> hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hdg: dma_intr: error=0x40 { UncorrectableError }, LBAsect=262311, high=0, low=262311, sector=262311
> ide: failed opcode was: unknown
> end_request: I/O error, dev hdg, sector 262311
> Buffer I/O error on device hdg1, logical block 131124
>
> fscking this disk freezes the entire system.
>
> The disk was remounted ro afterwards.
> Disk itself is ok. Is a new one.
I doubt it, you can verify this with:
http://smartmontools.sf.net
Hi Bartlomiej,
Thanks for your link.
# > hdg: dma_intr: status=0x51 { DriveReady SeekComplete Error }
# > hdg: dma_intr: error=0x40 { UncorrectableError }, LBAsect=262311, high=0, low=262311, sector=262311
# > ide: failed opcode was: unknown
# > end_request: I/O error, dev hdg, sector 262311
# > Buffer I/O error on device hdg1, logical block 131124
# >
# > fscking this disk freezes the entire system.
# >
# > The disk was remounted ro afterwards.
# > Disk itself is ok. Is a new one.
# http://smartmontools.sf.net
Extract from /usr/share/doc/smartmontools/WARNINGS.gz:
SYSTEM: Promise 20265 IDE-controller
PROBLEM: Smartctl locks system solid when used on CDROM/DVD device
REPORTER: see link below
LINK: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=208964
NOTE: Problem seems to affect kernel 2.4.21 only.
SYSTEM: Promise IDE-controllers and perhaps others also
PROBLEM: System freezes under heavy load, perhaps when running SMART
commands
REPORTER: Mario 'BitKoenig' Holbe [email protected]
LINK:
http://groups.google.de/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&selm=1wUXW-
2FA-9%40gated-at.bofh.it
NOTE: Before freezing, SYSLOG shows the following message(s)
kernel: hdf: dma timer expiry: dma status == 0xXX
where XX is two hexidecimal digits. This may be a kernel bug
or an underlying hardware problem. It's not clear if
smartmontools plays a role in provoking this problem. FINAL
NOTE: Problem was COMPLETELY resolved by replacing the power
supply. See URL above, entry on May 29, 2004 by Holbe. Other
things to try are exchanging cables, and cleaning PCI slots.
This sounds highly familiar and shows an at least hidden
correlation(-potential) between this kind of error and the Promise controller
PDC drivers.
Ok, maybe I'm suffering prejudices now. We'll see.
A year ago, other disks (IBM/WD) had trouble on the PDC also, but not on onboard
controllers. And they are still spinning today. (Means, they had not to
be replaced for hard disk errors)
Fact is however, that as mailed last year, even after a complete
exchange of mainboard and processor, the problem perexists through any
kernel-version. Furthermore, countless posts indicate similar or same
symptoms.
Nevertheless, I keep the list up-to-date in case of new info.
smartctl -a /dev/hdc gives:
Error 18 occurred at disk power-on lifetime: 2249 hours (93 days + 17
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 f8 a8 05 c3 e0 Error: UNC at LBA = 0x00c305a8 = 12780968
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 f8 a7 05 c3 06 00 00:08:14.850 READ SECTOR(S) EXT
25 00 00 9f 05 c3 06 00 00:08:14.850 READ DMA EXT
25 00 00 9f 04 c3 06 00 00:08:14.850 READ DMA EXT
25 00 00 9f 03 c3 06 00 00:08:14.850 READ DMA EXT
25 00 00 9f 02 c3 06 00 00:08:14.850 READ DMA EXT
Error 17 occurred at disk power-on lifetime: 2249 hours (93 days + 17
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 47 06 c3 e0 Error: UNC at LBA = 0x00c30647 = 12781127
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 9f 05 c3 06 00 00:07:48.550 READ DMA EXT
25 00 00 9f 04 c3 06 00 00:07:48.550 READ DMA EXT
25 00 00 9f 03 c3 06 00 00:07:48.550 READ DMA EXT
25 00 00 9f 02 c3 06 00 00:07:48.550 READ DMA EXT
25 00 00 9f 01 c3 06 00 00:07:48.550 READ DMA EXT
Error 16 occurred at disk power-on lifetime: 2249 hours (93 days + 17
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 b0 f2 57 e0 Error: UNC at LBA = 0x0057f2b0 = 5763760
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 20 af f2 57 10 00 00:43:45.600 READ SECTOR(S) EXT
25 00 28 a7 f2 57 10 00 00:43:45.600 READ DMA EXT
25 00 18 77 f2 57 10 00 00:43:45.600 READ DMA EXT
25 00 18 5f 28 57 11 00 00:43:45.600 READ DMA EXT
25 00 08 7f 10 54 10 00 00:43:45.600 READ DMA EXT
Error 15 occurred at disk power-on lifetime: 2249 hours (93 days + 17
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 28 b9 f2 57 e0 Error: UNC 40 sectors at LBA = 0x0057f2b9 =
5763769
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 28 a7 f2 57 10 00 00:43:17.850 READ DMA EXT
25 00 18 77 f2 57 10 00 00:43:17.850 READ DMA EXT
25 00 18 5f 28 57 11 00 00:43:17.850 READ DMA EXT
25 00 08 7f 10 54 10 00 00:43:17.850 READ DMA EXT
25 00 08 77 28 57 11 00 00:43:17.850 READ DMA EXT
Error 14 occurred at disk power-on lifetime: 2249 hours (93 days + 17
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 f8 23 3e 56 e0 Error: UNC at LBA = 0x00563e23 = 5652003
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 f8 07 3e 56 10 00 00:36:28.850 READ SECTOR(S) EXT
25 00 00 ff 3d 56 10 00 00:36:28.850 READ DMA EXT
25 00 00 ff 3c 56 10 00 00:36:28.850 READ DMA EXT
25 00 00 ff 3b 56 10 00 00:36:28.850 READ DMA EXT
25 00 00 ff 3a 56 10 00 00:36:28.850 READ DMA EXT
Could you please explain what these errors mean exactly and what may
have caused them?
Might it be possible that these transmission/xxx errors be caused
by a bad card and/or driver?
I'm asking this as the disk never showed errors on onboard IDE ports.
Nils
--
A+
* N.Radtke@ * University of Stuttgart * icq / lc *
* http://www.Think-Future.de * dep.comp.science * 9336272/92045 *
:x UTM 32 0515651 5394088 :)
One FISHWICH coming up!!
Nils Radtke wrote:
> Error 14 occurred at disk power-on lifetime: 2249 hours (93 days + 17
> hours)
> When the command that caused the error occurred, the device was doing
> SMART Offline or Self-test.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 f8 23 3e 56 e0 Error: UNC at LBA = 0x00563e23 = 5652003
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 24 00 f8 07 3e 56 10 00 00:36:28.850 READ SECTOR(S) EXT
> 25 00 00 ff 3d 56 10 00 00:36:28.850 READ DMA EXT
> 25 00 00 ff 3c 56 10 00 00:36:28.850 READ DMA EXT
> 25 00 00 ff 3b 56 10 00 00:36:28.850 READ DMA EXT
> 25 00 00 ff 3a 56 10 00 00:36:28.850 READ DMA EXT
>
>
> Could you please explain what these errors mean exactly and what may
> have caused them?
>
> Might it be possible that these transmission/xxx errors be caused
> by a bad card and/or driver?
>
> I'm asking this as the disk never showed errors on onboard IDE ports.
>
> Nils
>
This error is reported by the drive itself, indicating uncorrectable
errors when attempting to read data from the media. It is quite unlikely
that the controller or driver is responsible for this sort of error, as
can occasionally be the case for DMA timeout errors. Almost certainly
the hard drive is failing.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/