2005-03-25 08:29:23

by Andrew Morton

[permalink] [raw]
Subject: 2.6.12-rc1-mm3


ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/

- Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.

- Again, we'd like people who have had recent DRM and USB resume problems to
test and report, please.

- The bk-ide-dev tree is back after a couple of weeks of difficulties.

- Jeff asks that anyone who has had problems with the Silicon Image SATA
drivers test sata_sil-corruption--lockup-fix.patch, which is included in
this kernel.



Changes since 2.6.12-rc1-mm2:


linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-arm.patch
bk-audit.patch
bk-cifs.patch
bk-cpufreq.patch
bk-cryptodev.patch
bk-driver-core.patch
bk-driver-core-hang-fix.patch
bk-drm.patch
bk-drm-via.patch
bk-i2c.patch
bk-ia64.patch
bk-ide-dev.patch
bk-ieee1394.patch
bk-input.patch
bk-jfs.patch
bk-kbuild.patch
bk-libata.patch
bk-mtd.patch
bk-net.patch
bk-netdev.patch
bk-nfs.patch
bk-nfs-gcc4-fix.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
bk-scsi-rc-fixes.patch
bk-serial.patch
bk-usb.patch
bk-watchdog.patch
bk-xfs.patch

Latest versions of sudsystem trees

-fix-agp_backend-usage-in-drm_agp_init.patch
-drm-ioctl-fix.patch
-zd1201-makefile-fix.patch

Merged

-agp-make-some-code-static.patch

Dropped - it broke things.

+powernow-k7recalibrate-cpu_khz.patch
+cpufreq-timers-recalibrate_cpu_khz.patch

cpufreq fixes

+bk-driver-core-hang-fix.patch

Fix for new sysfs/kobject locking code

+sata_sil-corruption--lockup-fix.patch

Silicon Image SATA fixes

+bk-nfs-gcc4-fix.patch

Fix bk-nfs for gcc4

+drivers-pci-hotplug-cpqphp_corec-fix-a-check-after-use.patch
+drivers-usb-misc-usbtestc-fix-a-null-dereference.patch

use-after-free buglets which the compiler was hiding.

+ub-atomicity-fix.patch

Fix sleep-while-atomic in the new usb block driver ub.c

+usb_cdc-build-fix.patch

Compile fix

+freepgt-hugetlb_free_pgd_range-fix-aio-panic-fix.patch

Fix freepgt-hugetlb_free_pgd_range.patch for
ppc64-fix-aio-panic-caused-by-is_hugepage_only_range.patch

+drivers-net-amd8111ec-fix-napi-interrupt-in-poll.patch

net driver NAPI fix

+ipv6-fix-address-interface-handling-according-to-the-scoping-architecture.patch

Fix ipv6 connections to the local address

+drivers-net-wireless-airoc-correct-a-wrong-check.patch

airo fixlet

+ppc32-report-chipset-version-in-common-proc-cpuinfo-handling-fix.patch

ppc32 build fix

+ppc32-fix-broken-compile-on-sky-computers-hdpu-platform.patch
+ppc32-8xx-typo-fix.patch

ppc32 fixes

+ppc64-fix-lpar-iommu-setup-code-for-p630.patch

ppc64 fix

+mips-update-vr41xx-rtc-support.patch

MIPS fix

-via-irq-fixup-fix-warning-fix.patch

Folded into the new version of x86-via-workaround.patch

-x86_64-separate-amd-cmp-detection-from-hyper-threading.patch

This conflicted with the Intel cpu type detection patches

+x86_64-nop-out-system-call-instruction-in-vsyscall-page-fix.patch

Fix x86_64-nop-out-system-call-instruction-in-vsyscall-page.patch

+x86_64-fix-missing-delay-when-the-tsc-counter-just.patch

x86_64 fix

+x86_64-show_stack-touch_nmi_watchdog.patch

I was having inexplicable soft-lockup-detector timeouts during sysrq-t over
9600 baud serial. Don't know if this fixes it though.

+s390-kernel-faults.patch
+s390-signal-stack-bug.patch
+s390-dasd-preferred-path-support.patch
+s390-qeth-layer2-fixes.patch
+s390-qeth-1920-device-support.patch
+s390-qeth-blkt-tuning.patch
+s390-qeth-tcp-segmentation-offload.patch
+s390-claw-network-device-driver.patch

s/390 updates

+relayfs-properly-handle-oversized-events.patch

relayfs fix

-keys-pass-session-keyring-to-call_usermodehelper-warning-fix.patch

Unneeded

+keys-pass-session-keyring-to-call_usermodehelper-fix.patch

Fix stuff in the new keys-pass-session-keyring-to-call_usermodehelper.patch

+fs-attrc-fix-check-after-use.patch
+fs-smbfs-requestc-fix-null-dereference.patch

More fixlets derived from the Coverity tool (does this thing have a name?)

+sched-uninline-task_timeslice.patch

Uninline a scheduler function.

-wbsd-update.patch

rmk spat this back.

+doc-where-to-find-ldd3.patch

Add a pointer to the Linux Device Drivers book.

+fuse-device-functions-comments-and-documentation.patch
+fuse-device-functions-cleanup.patch
+fuse-mount-options-comments-and-documentation.patch
+fuse-mount-options-fix-cleanup.patch

FUSE fixes and cleanups

+sound-oss-rme96xxc-remove-kernel-22-ifs.patch
+drivers-char-mwave-tp3780ic-remove-kernel-22-ifs.patch
+drivers-net-skfp-cleanups.patch

Little fixes and cleansup

+remove-exports-for-oem-modules.patch
+mm-page_allocc-unexport-nr_swap_pages.patch
+unexport-console_unblank.patch
+mm-swapc-unexport-vm_acct_memory.patch
+mm-swapfilec-unexport-total_swap_pages.patch
+mm-swap_statec-unexport-swapper_space.patch
+unexport-slab_reclaim_pages.patch
+net-atm-resourcesc-remove-__free_atm_dev.patch

unexport some symbols.



number of patches in -mm: 867
number of changesets in external trees: 743
number of patches in -mm only: 834
total patches: 1577



All 867 patches:

linus.patch

pcmcia-properly-bail-out-on-mtd-related-ioctl-invocation.patch
pcmcia: properly bail out on MTD-related ioctl invocation

pcmcia-dont-lock-up-in-rsrc_nonstatic-pcmcia_validate_mem.patch
pcmcia: don't lock up in rsrc_nonstatic pcmcia_validate_mem

pcmcia-dont-send-eject-request-events-to-userspace.patch
pcmcia: don't send eject request events to userspace

ppc64-preliminary-changes-to-of-fixup-functions.patch
ppc64: preliminary changes to OF fixup functions

ppc64-make-of-node-fixup-code-usable-at-runtime.patch
ppc64: make OF node fixup code usable at runtime

ppc64-introduce-pseries_reconfig.patch
ppc64: introduce pSeries_reconfig.[ch]

ppc64-promc-use-pseries-reconfig-notifier.patch
ppc64: prom.c: use pSeries reconfig notifier

ppc64-fix-aio-panic-caused-by-is_hugepage_only_range.patch
ppc64: fix AIO panic on PPC64 caused by is_hugepage_only_range()

handle-multiple-video-cards-on-the-same-bus.patch
handle multiple video cards on the same bus

tty-overrun-time-fix.patch
tty overrun time fix

ia64-msi-warning-fixes.patch
ia64 msi warning fixes

ia64-config_apci_numa-fix.patch
ia64 CONFIG_APCI_NUMA fix

bk-acpi.patch

acpi-ec-warning-fix.patch
acpi ec.c warning fix

acpi-toshiba-failure-handling.patch
acpi: Toshiba failure handling

acpi-video-pointer-size-fix.patch
acpi video pointer size fix

acpi-create_polling_proc-fix.patch
acpi: create_polling_proc() fix

bk-agpgart.patch

agp-fix-for-xen-vmm.patch
AGP fix for Xen VMM

bk-alsa.patch

include-linux-soundcardh-endianness-fix.patch
include/linux/soundcard.h: endianness fix

bk-arm.patch

arm-atomic_sub_and_test.patch
arm atomic_sub_and_test()

bk-audit.patch

bk-cifs.patch

bk-cpufreq.patch

powernow-k7recalibrate-cpu_khz.patch
powernowk7: recalibrate cpu_khz

cpufreq-timers-recalibrate_cpu_khz.patch
cpufreq timers: recalibrate cpu_khz

bk-cryptodev.patch

bk-driver-core.patch

export-platform_add_devices.patch
export platform_add_devices

bk-driver-core-hang-fix.patch
bk-driver-core hang fix

bk-drm.patch

3dfx-drm-depends-on-pci.patch
3dfx DRM depends on PCI

bk-drm-via.patch

bk-i2c.patch

bk-ia64.patch

bk-ide-dev.patch

bk-ieee1394.patch

bk-input.patch

alps-printk-tidy.patch
alps-printk-tidy

bk-jfs.patch

bk-kbuild.patch

uml-make-deb-pkg-build-target-build-a-debian-style-user-mode-linux-package.patch
uml: make deb-pkg build target build a Debian-style user-mode-linux package

uml-restore-proper-descriptions-in-make-deb-pkg-target.patch
UML - Restore proper descriptions in make deb-pkg target

doc-describe-kbuild-pitfall.patch
doc: describe Kbuild pitfall

complete-cpufreq-kconfig-cleanup.patch
complete cpufreq Kconfig cleanup

bk-libata.patch

sata_sil-corruption--lockup-fix.patch
sata_sil corruption / lockup fix

bk-mtd.patch

bk-net.patch

bk-netdev.patch

bk-nfs.patch

bk-nfs-gcc4-fix.patch
nfs4 build fix

nfs4-empty-array-fix.patch
nfs4 empty array fix

bk-ntfs.patch

bk-pci.patch

debug-for-pci-io-mem-allocation.patch
DEBUG for PCI IO & MEM allocation

pci-pci-transparent-bridge-handling-improvements-pci-core.patch
PCI-PCI transparent bridge handling improvements (pci core)

pci-pci-transparent-bridge-handling-improvements-yenta_socket.patch
PCI-PCI transparent bridge handling improvements (yenta_socket)

acpi-bridge-hotadd-acpi-based-root-bridge-hot-add.patch
acpi bridge hotadd: ACPI based root bridge hot-add

acpi-bridge-hotadd-fix-pci_enable_device-for-p2p-bridges.patch
acpi bridge hotadd: Fix pci_enable_device() for p2p bridges

acpi-bridge-hotadd-make-pcibios_fixup_bus-hot-plug-safe.patch
acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe

acpi-bridge-hotadd-prevent-duplicate-bus-numbers-when-scanning-pci-bridge.patch
acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge

acpi-bridge-hotadd-take-the-pci-lock-when-modifying-pci-bus-or-device-lists.patch
acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists

acpi-bridge-hotadd-link-newly-created-pci-child-bus-to-its-parent-on-creation.patch
acpi bridge hotadd: Link newly created pci child bus to its parent on creation

acpi-bridge-hotadd-make-the-pci-remove-routines-safe-for-failed-hot-plug.patch
acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug

acpi-bridge-hotadd-remove-hot-plugged-devices-that-could-not-be-allocated-resources.patch
acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources

acpi-bridge-hotadd-read-bridge-resources-when-fixing-up-the-bus.patch
acpi bridge hotadd: Read bridge resources when fixing up the bus

acpi-bridge-hotadd-allow-acpi-add-and-start-operations-to-be-done-independently.patch
acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently

acpi-bridge-hotadd-export-the-interface-to-get-pci-id-for-an-acpi-handle.patch
acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle

drivers-pci-hotplug-cpqphp_corec-fix-a-check-after-use.patch
drivers/pci/hotplug/cpqphp_core.c: fix a check after use

bk-scsi.patch

megaraid_sas-announcing-new-module-for.patch
megaraid_sas: Announcing new module for LSI Logic's SAS based MegaRAID controllers

open-iscsi-scsi.patch
open-iscsi-scsi

open-iscsi-headers.patch
open-iscsi-headers

open-iscsi-kconfig.patch
open-iscsi-kconfig

open-iscsi-makefile.patch
open-iscsi-makefile

open-iscsi-netlink.patch
open-iscsi-netlink

open-iscsi-doc.patch
open-iscsi-doc

bk-scsi-rc-fixes.patch

add-scsi-changer-driver.patch
add scsi changer driver

scsi-ch-build-fix.patch
scsi ch.c build fix

bk-serial.patch

bk-usb.patch

ub-atomicity-fix.patch
ub: atomicity fix

drivers-usb-misc-usbtestc-fix-a-null-dereference.patch
drivers/usb/misc/usbtest.c: fix a NULL dereference

usb_cdc-build-fix.patch
usb_cdc build fix

usb-resume-fixes.patch
usb resume fixes

usb-suspend-updates-interface-suspend.patch
usb suspend updates (interface suspend)

hcd-suspend-uses-pm_message_t.patch
hcd suspend uses pm_message_t

zd1201-build-fix.patch
zd1201 build fix

usb-support-for-new-ipod-mini-and-possibly-others.patch
usb: support for new ipod mini (and possibly others)

usb-wacom-driver-update.patch
usb: wacom driver update

bk-watchdog.patch

bk-xfs.patch

mm.patch
add -mmN to EXTRAVERSION

fix-help-for-acpi_container.patch
Fix help for ACPI_CONTAINER

swapspace-layout-improvements.patch
swapspace-layout-improvements
/proc/swaps negative Used

bdi-provide-backing-device-capability-information.patch
BDI: Provide backing device capability information [try #3]

cpusets-big-numa-cpu-and-memory-placement-backing_dev-fix.patch
cpusets-big-numa-cpu-and-memory-placement-backing_dev-fix

add-a-clear_pages-function-to-clear-pages-of-higher.patch
add a clear_pages function to clear pages of higher order

slab-kmalloc-cleanups.patch
slab.[ch]: kmalloc() cleanups

slab-64bit-fix.patch
slab: 64-bit fix

vmscan-move-code-to-isolate-lru-pages-into-separate-function.patch
vmscan: move code to isolate LRU pages into separate function

mm-counter-operations-through-macros.patch
mm counter operations through macros

mm-counter-operations-through-macros-tidy.patch
mm-counter-operations-through-macros-tidt

vmscan-notice-slab-shrinking.patch
vmscan: notice slab shrinking

slab-shrinkers-use-vfs_cache_pressure.patch
slab shrinkers: use vfs_cache_pressure

madvise-do-not-split-the-maps.patch
madvise: do not split the maps

madvise-merge-the-maps.patch
madvise: merge the maps

include-cleanup-in-pgalloch.patch
include cleanup in pgalloc.h

fix-mmap-of-dev-kmem.patch
Fix mmap of /dev/kmem

unused-size-assignment-in-filemap_nopage.patch
unused 'size' assignment in filemap_nopage

freepgt-free_pgtables-use-vma-list.patch
freepgt: free_pgtables use vma list

freepgt-remove-mm_vm_sizemm.patch
freepgt: remove MM_VM_SIZE(mm)

freepgt-hugetlb_free_pgd_range.patch
freepgt: hugetlb_free_pgd_range

freepgt-hugetlb_free_pgd_range-fix-aio-panic-fix.patch
ppc64-fix-aio-panic-caused-by-is_hugepage_only_range-ia64-fix

freepgt-remove-arch-pgd_addr_end.patch
freepgt: remove arch pgd_addr_end

freepgt-mpnt-to-vma-cleanup.patch
freepgt: mpnt to vma cleanup

freepgt-hugetlb-area-is-clean.patch
freepgt: hugetlb area is clean

eni155p-error-handling-fix.patch
ENI155P error handling fix

remove-last_rx-update-from-loopback-device.patch
remove last_rx update from loopback device

a-new-10gb-ethernet-driver-by-chelsio-communications.patch
A new 10GB Ethernet Driver by Chelsio Communications

a-new-10gb-ethernet-driver-by-chelsio-communications-update.patch
A new 10GB Ethernet Driver by Chelsio Communications (update)

pcnet32-bug-79c975-fiber-fix.patch
pcnet32 79C975 fiber fix

dm9000-network-driver.patch
DM9000 network driver

null-pointer-bug-in-netpollc.patch
NULL pointer bug in netpoll.c

restore-ports-module-parameter-for-ip_nat_ftp-and-ip_nat_irc.patch
Restore ports module parameter for ip_nat_ftp and ip_nat_irc

e1000-flush-work-queues-on-remove.patch
e1000: flush work queues on remove

ipt-leak-fix.patch
memory leak in net/sched/ipt.c?

drivers-net-amd8111ec-fix-napi-interrupt-in-poll.patch
drivers/net/amd8111e.c: fix NAPI interrupt in poll

ipv6-fix-address-interface-handling-according-to-the-scoping-architecture.patch
ipv6: Fix address/interface handling according to the scoping architecture

drivers-net-wireless-airoc-correct-a-wrong-check.patch
drivers/net/wireless/airo.c: correct a wrong check

selinux-make-code-static-and-remove-unused-code.patch
SELinux: make code static and remove unused code

selinux-allow-mounting-of-filesystems-with-invalid-root-inode-context.patch
SELinux: allow mounting of filesystems with invalid root inode context

selinux-audit-unrecognized-netlink-messages.patch
SELinux: audit unrecognized netlink messages

selinux-add-name_connect-permission-check.patch
SELinux: add name_connect permission check

ppc32-fix-mv64x60-internal-sram-size.patch
ppc32: Fix mv64x60 internal SRAM size

ppc32-move-83xx-85xx-device-and-system-description-files.patch
ppc32: Move 83xx & 85xx device and system description files

ppc32-fix-config_serial_text_debug-support-on-83xx.patch
ppc32: Fix CONFIG_SERIAL_TEXT_DEBUG support on 83xx

ppc32-typo-fix-in-load-store-string-emulation.patch
ppc32: typo fix in load/store string emulation

ppc32-report-chipset-version-in-common-proc-cpuinfo-handling.patch
ppc32: Report chipset version in common /proc/cpuinfo handling

ppc32-report-chipset-version-in-common-proc-cpuinfo-handling-fix.patch
ppc32-report-chipset-version-in-common-proc-cpuinfo-handling fix

ppc32-dmasound-compilation-fix.patch
ppc32: dmasound compilation fix

ppc32-fix-sandpoint-soft-reboot.patch
ppc32: Fix Sandpoint Soft Reboot

ppc32-64-map-prefetchable-pci-without-guarded-bit.patch
ppc32/64: Map prefetchable PCI without guarded bit

ppc32-fix-broken-compile-on-sky-computers-hdpu-platform.patch
ppc32: fix broken compile on Sky Computers HDPU platform

ppc32-8xx-typo-fix.patch
ppc32: 8xx typo fix

ppc64-pci_dnc-use-pseries-reconfig-notifier.patch
ppc64: pci_dn.c: use pSeries reconfig notifier

ppc64-pseries_iommuc-use-pseries-reconfig-notifier.patch
ppc64: pSeries_iommu.c: use pSeries reconfig notifier

ppc64-fix-gcc4-compile-error-in-pacah.patch
ppc64: fix gcc4 compile error in paca.h

ppc64-fix-compile-error-in-promc.patch
ppc64: fix compile error in prom.c

ppc64-fix-linkage-error-on-g5.patch
ppc64: fix linkage error on G5

ppc64-fix-semtimedop-compat-syscall.patch
ppc64: fix semtimedop compat syscall

ppc64-fix-pseries-hcall-stubs.patch
ppc64: fix pseries hcall stubs

ppc64-make-numa=off-command-line-argument-work-again.patch
ppc64: Make numa=off command line argument work again

ppc64-fix-ethernet-phy-reset-on-imac-g5.patch
ppc64: Fix ethernet PHY reset on iMac G5

ppc64-fix-lpar-iommu-setup-code-for-p630.patch
PPC64: Fix LPAR IOMMU setup code for p630

mips-linkage-fix.patch
mips linkage fix

mips-update-vr41xx-rtc-support.patch
mips: update VR41xx RTC support

x86-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
x86: reduce cacheline bouncing in cpu_idle_wait

x86-cmos-time-update-optimisation.patch
x86: CMOS time update optimisation

x86-cmos-time-update-optimisation-tidy.patch
x86-cmos-time-update-optimisation-tidy

x86-cmos-time-update-optimisation-locking-fix.patch
x86-cmos-time-update-optimisation locking fix

x86-cmos-time-update-optimisation-locking-fix-check.patch
x86-cmos-time-update-optimisation-locking-fix-check

x86-via-workaround.patch
x86: via workaround

apm-fix-interrupts-enabled-in-device_power_up.patch
APM: fix interrupts enabled in device_power_up

rtc_lock-is-irq-safe.patch
rtc_lock is irq-safe

fix-put_user-for-80386.patch
fix put_user for 80386

es7000-legacy-mappings-update.patch
ES7000 Legacy Mappings Update

x86-fix-esp-corruption-cpu-bug-take-2.patch
x86: fix ESP corruption CPU bug (take 2)

x86-fix-esp-corruption-cpu-bug-take-2-fix.patch
x86-fix-esp-corruption-cpu-bug-take-2 fix

es7000-dmi-cleanup.patch
es7000 dmi cleanup

i386-add-kstack=n-option-from-x86_64.patch
i386: add kstack=N option (from x86_64)

reduce-inlined-x86-memcpy-by-2-bytes.patch
x86: reduce inlined memcpy by 2 bytes

rename-fpu_verify_area-to-fpu_access_ok.patch
rename FPU_*verify_area to FPU_*access_ok

x86_64-update-defconfig.patch
x86_64: Update defconfig

x86_64-add-new-amd-cpuid-flags-to-cpuinfo.patch
x86_64: Add new AMD cpuid flags to cpuinfo

x86_64-add-an-64bit-entry-path-for-exec.patch
x86_64: Add an 64bit entry path for exec

x86_64-busses-array-is-only-indexed-with-a-8bit-value.patch
x86_64: Busses array is only indexed with a 8bit value, doesn't make sense

x86_64-fix-compilation-with-config_proc_fs=n.patch
x86_64: Fix compilation with CONFIG_PROC_FS=n

x86_64-move-hpet-selection-into-processor-specific.patch
x86_64: Move HPET selection into processor specific options

x86_64-remove-never-used-obsolete-file.patch
x86_64: Remove never used obsolete file

x86_64-fix-indentation-in-vsyscallc-no-functional.patch
x86_64: Fix indentation in vsyscall.c. No functional changes.

x86_64-nop-out-system-call-instruction-in-vsyscall-page.patch
x86_64: Nop out system call instruction in vsyscall page when not needed

x86_64-nop-out-system-call-instruction-in-vsyscall-page-fix.patch
x86_64: fix vsyscall.c syntax error

x86_64-remove-obsolete-comments-in-vsyscallc-and-fix.patch
x86_64: Remove obsolete comments in vsyscall.c and fix some others.

x86_64-remove-noisy-printk-in-k8-bus-detection-code.patch
x86_64: Remove noisy printk in K8 bus detection code

x86_64-remove-unused-and-broken-code-in-ioh.patch
x86_64: Remove unused and broken code in io.h

x86_64-remove-stale-unused-file.patch
x86_64: Remove stale unused file

x86_64-move-put_user-out-of-line.patch
x86_64: Move put_user out of line

x86_64-give-out-of-line-get_user-better-calling.patch
x86_64: Give out of line get_user better calling conventions

x86_64-work-around-tyan-bios-mtrr-initialization-bug.patch
x86_64: Work around Tyan BIOS MTRR initialization bug.

x86_64-include-pci-express-configuration.patch
x86_64: Include PCI-Express configuration

x86_64-cleanups-in-new-backtrace-code-in-oprofile.patch
x86_64: Cleanups in new backtrace code in oprofile

x86_64-fix-special-isa-case-in-iounmap.patch
x86_64: Fix special ISA case in iounmap()

x86_64-fix-formatting-and-white-space-in-signal-code.patch
x86_64: Fix formatting and white space in signal code

x86_64-mem=xxx-will-now-limit-kernel-memory-to-xxx.patch
x86_64: mem=XXX will now limit kernel memory to XXX instead of XXX+1MB

x86_64-resume-pit-for-x86_64.patch
x86_64: resume PIT for x86_64

x86_64-fix-nmi-rtc-access-race.patch
x86_64: Fix NMI RTC access race

x86_64-minor-fix-to-tlb-flush-ipi.patch
x86_64: Minor fix to TLB flush IPI

x86_64-always-reload-cr3-completely-when-a-lazy-mm.patch
x86_64: Always reload CR3 completely when a lazy MM thread drops a MM.

x86_64-fix-ldt-descriptor.patch
x86_64: Fix LDT descriptor

x86_64-change-the-y2069-bug-in-the-rtc-timer-code-to-be.patch
x86_64: Change the y2069 bug in the RTC timer code to be a y2100 bug.

x86_64-only-free-pmds-and-puds-after-other-cpus-have.patch
x86_64: Only free PMDs and PUDs after other CPUs have been flushed

x86_64-dont-enable-interrupts-in-oopses.patch
x86_64: Don't enable interrupts in oopses unconditionally

x86_64-fix-smp-fallback-to-up.patch
x86_64: Fix SMP fallback to UP

x86_64-fix-config_preempt.patch
x86_64: Fix CONFIG_PREEMPT

x86_64-fix-exception-stack-detection-during-backtraces.patch
x86_64: Fix exception stack detection during backtraces

x86_64-fix-gcc-34-warning-in-bitopsc.patch
x86_64: Fix gcc 3.4 warning in bitops.c

x86_64-fix-missing-delay-when-the-tsc-counter-just.patch
x86_64: Fix missing delay when the TSC counter just overflowed

x86_64-clean-up-the-iommu-initialisation-a-bit.patch
x86_64: Clean up the IOMMU initialisation a bit

x86-64-kconfig-typo-trivial.patch
x86-64: kconfig typo

x86_64-remove-old-decl-trivial.patch
x86_64: remove old decl (trivial)

x86_64-avoid-panic-lockup.patch
x86_64: avoid panic lockup

x86_64-hugetlb-fix.patch
x86_64: hugetlb fix

x86-64-forgot-asmlinkage-on-sys_mmap.patch
x86-64: forgot asmlinkage on sys_mmap

x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
x86_64: reduce cacheline bouncing in cpu_idle_wait

x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait-warning-fix.patch
x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait-warning-fix

x86-64-kprobes-handle-%rip-relative-addressing-mode.patch
x86-64 kprobes: handle %RIP-relative addressing mode

kernel-parameters-ia-32-x86-64-cleanups.patch
kernel-parameters: IA-32/X86-64 cleanups

x86-x86_64-reading-deterministic-cache-parameters-and-exporting-it-in-sysfs.patch
x86, x86_64: reading deterministic cache parameters and exporting it in /sysfs

x86-x86_64-intel-dual-core-detection.patch
x86, x86_64: Intel dual-core detection

x86-cacheline-alignment-for-cpu-maps.patch
x86: cacheline alignment for cpu maps

x86_64-dump-stack-in-early-exception.patch
x86_64-dump-stack-in-early-exception

x86_64-show_stack-touch_nmi_watchdog.patch
x86_64-show_stack-touch_nmi_watchdog

alpha-spinlockh-update.patch
alpha spinlock.h update

ia64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
ia64: reduce cacheline bouncing in cpu_idle_wait

ia64-reduce-cacheline-bouncing-in-cpu_idle_wait-fix.patch
ia64-reduce-cacheline-bouncing-in-cpu_idle_wait fix

swsusp-add-missing-refrigerator-calls.patch
swsusp: Add missing refrigerator calls

suspend-to-ram-update-videotxt-with-more-systems.patch
suspend-to-ram: update video.txt with more systems

pm-remove-obsolete-pm_-from-vtc.patch
pm: remove obsolete pm_* from vt.c

swsusp-small-updates.patch
swsusp: small updates

swsusp-1-1-kill-swsusp_restore.patch
swsusp: kill swsusp_restore

m32r-update-mmu-less-support-1.patch
m32r: Update MMU-less support #1

m32r-update-mmu-less-support-2.patch
m32r: Update MMU-less support #2

m32r-update-mmu-less-support-3.patch
m32r: Update MMU-less support #3

m32r-fix-m32102-i-cache-invalidation.patch
m32r: Fix M32102 I-cache invalidation

m32r_sio-driver-update.patch
m32r_sio driver update

m68k-update-signal-delivery-handling.patch
M68k: Update signal delivery handling

m68k-stdma-replace-sleep_on-with-wait_event.patch
M68k/stdma: Replace sleep_on() with wait_event()

zorro-replace-printk-with-pr_info-in-drivers-zorro-zorroc.patch
Zorro: replace printk() with pr_info() in drivers/zorro/zorro.c

mac-ncr5380-scsi-fix-bus-error.patch
Mac NCR5380 SCSI: Fix bus error

m68k-ip-checksum-updates.patch
M68k: IP checksum updates

sun-3-3x-enable-sun-partition-tables-support-by-default.patch
Sun-3/3x: Enable Sun partition tables support by default

m68k-add-missing-pieces-of-thread-info-tif_memdie-support.patch
M68k: Add missing pieces of thread info TIF_MEMDIE support

tpm-depends-on-pci.patch
TPM depends on PCI

uml-cope-with-uml_net-security-fix-2.patch
uml: cope with uml_net security fix

uml-fix-compile.patch
uml: fix compile

uml-cpu_relax-fix.patch
uml: cpu_relax fix

uml-extend-cmd-line-limits.patch
uml: extend cmd line limits

uml-disable-more-hardware-kconfig-opt-and-rename-usermode-to-uml.patch
uml: disable more hardware kconfig opt and rename USERMODE to UML

uml-little-build-fixes.patch
Uml: little build fixes

uml-factor-out-common-code-in-user-obj-handling.patch
uml: factor out common code in user-obj handling

uml-kbuild-link-cmd.patch
uml - kbuild: link cmd

uml-add-kconfig-debug-deps.patch
uml: add kconfig debug deps

uml-real-fix-for-__gcov_init-symbols.patch
uml: real fix for __gcov_init symbols

uml-fix-cond-expr-as-lvalues-warning.patch
Subject: [patch 12/12] uml: fix "cond. expr. as lvalues" warning

s390-swapped-memset-arguments.patch
s390: swapped memset arguments.

s390-kernel-faults.patch
s390: kernel faults

s390-signal-stack-bug.patch
s390: signal stack bug

s390-dasd-preferred-path-support.patch
s390: dasd preferred path support

s390-qeth-layer2-fixes.patch
s390: qeth layer2 fixes

s390-qeth-1920-device-support.patch
s390: qeth 1920 device suppor

s390-qeth-blkt-tuning.patch
s390: qeth blkt tuning

s390-qeth-tcp-segmentation-offload.patch
s390: qeth tcp segmentation offload

s390-claw-network-device-driver.patch
s390: claw network device driver

make-sysrq-f-call-oom_kill.patch
make sysrq-F call oom_kill()

mtrr-size-and-base-debug.patch
mtrr size-and-base debugging

cant-unmount-bad-inode.patch
Can't unmount bad inode

iounmap-debugging.patch
iounmap debugging

detect-soft-lockups.patch
detect soft lockups

detect-soft-lockups-from-touch_nmi_watchdog.patch
detect-soft-lockups: call from touch_nmi_watchdog

areca-raid-linux-scsi-driver.patch
ARECA RAID Linux scsi driver

rt-lsm.patch
RT-LSM

tty-output-lossage-fix.patch
tty output lossage fix

cx24110-conexant-frontend-update.patch
cx24110 Conexant Frontend update

nice-and-rt-prio-rlimits.patch
nice and rt-prio rlimits

relayfs.patch
relayfs

relayfs-properly-handle-oversized-events.patch
relayfs: properly handle oversized events

relayfs-backing_dev-fix.patch
relayfs-backing_dev-fix

cfq-iosched-update-to-time-sliced-design.patch
cfq-iosched: update to time sliced design

cfq-iosched-update-to-time-sliced-design-export-task_nice.patch
cfq-iosched-update-to-time-sliced-design-export-task_nice

cfq-iosched-update-to-time-sliced-design-fix.patch
cfq-iosched-update-to-time-sliced-design fix

cfq-iosched-update-to-time-sliced-design-fix-fix.patch
cfq-iosched-update-to-time-sliced-design-fix-fix

cfq-iosched-update-to-time-sliced-design-use-bio_data_dir.patch
cfq-iosched-update-to-time-sliced-design: use bio_data_dir()

cfq-ioschedc-fix-soft-hang-with-non-fs-requests.patch
cfq-iosched.c: fix soft hang with non-fs requests

keys-discard-key-spinlock-and-use-rcu-for-key-payload.patch
keys: Discard key spinlock and use RCU for key payload

keys-discard-key-spinlock-and-use-rcu-for-key-payload-try-4.patch
keys: Discard key spinlock and use RCU for key payload - try #4

keys-pass-session-keyring-to-call_usermodehelper.patch
Keys: Pass session keyring to call_usermodehelper()

keys-pass-session-keyring-to-call_usermodehelper-fix.patch
keys-pass-session-keyring-to-call_usermodehelper fix

keys-use-rcu-to-manage-session-keyring-pointer.patch
Keys: Use RCU to manage session keyring pointer

keys-make-request-key-create-an-authorisation-key.patch
Keys: Make request-key create an authorisation key

stallion-driver-module-clean-up.patch
Stallion driver module clean up

use-__init-and-__exit-in-pktcdvd.patch
Use __init and __exit in pktcdvd

dvd-ram-support-for-pktcdvd.patch
DVD-RAM support for pktcdvd

break_lock-fix-2.patch
break_lock fix

cdrom-cdu31a-cleanups.patch
cdrom/cdu31a: cleanups

cdrom-cdu31a-locking-fixes.patch
cdrom/cdu31a: locking fixes

cdrom-cdu31a-use-wait_event.patch
cdrom/cdu31a: use wait_event

revert-gconfig-changes.patch
revert recent gconfig changes

revert-gconfig-changes-build-fix.patch
revert-gconfig-changes build fix

enable-gcc-warnings-for-vsprintf-vsnprintf-with-format-attribute.patch
Enable gcc warnings for vsprintf/vsnprintf with "format" attribute

w6692-eliminate-bad-section-references.patch
w6692: eliminate bad section references

teles3-eliminate-bad-section-references.patch
teles3: eliminate bad section references

elsa-eliminate-bad-section-references.patch
elsa eliminate bad section references

hfc_sx-eliminate-bad-section-references.patch
hfc_sx: eliminate bad section references

sedlbauer-eliminate-bad-section-references.patch
sedlbauer: eliminate bad section references

fix-mprotect-with-len=size_t-1-to-return-enomem.patch
fix mprotect() with len=(size_t)(-1) to return -ENOMEM

checkstack-fix-sort-misbehavior-for-long-function-names.patch
checkstack: fix sort misbehavior for long function names

fix-irq_affinity-write-from-proc-for-ia64.patch
Fix irq_affinity write from /proc for ia64

fix-mmap-return-value-to-conform-posix.patch
fix mmap() return value to conform POSIX

fix-mmap-return-value-to-conform-to-posix.patch
fix mmap() return value to conform to POSIX

exports-to-enable-clock-driver-modules.patch
Exports to enable clock driver modules

per-cpu-irq-stat.patch
Per cpu irq stat

kill-drivers-cdrom-mcdc.patch
kill drivers/cdrom/mcd.c

drivers-char-isicomc-gcc4-fix.patch
drivers/char/isicom.c gcc4 fix

infiniband-remove-unsafe-use-of-in_atomic.patch
InfiniBand: remove unsafe use of in_atomic()

new-console-flag-con_boot.patch
New console flag: CON_BOOT

new-console-flag-con_boot-comment.patch
new-console-flag-con_boot-comment

pipe-save-one-pipe-page.patch
pipe: save one pipe page

kprobes-incorrect-spin_unlock_irqrestore-call-in-register_kprobe.patch
kprobes: incorrect spin_unlock_irqrestore() call in register_kprobe()

ext2_make_empty-information-leak.patch
ext2_make_empty information leak fix

missing-set_fs-calls-around-kernel-syscall.patch
Missing set_fs() calls around kernel syscall

cpusets-mems-generation-deadlock-fix.patch
cpusets: mems generation deadlock fix

cpusets-alloc-gfp_wait-sleep-fix.patch
cpusets: alloc GFP_WAIT sleep fix

mtrr-uaccess-range-checking-fix.patch
mtrr: uaccess range checking fix

cciss-range-checking-fix.patch
cciss: range chcking fix

fix-posix-timers-expiring-before-their-scheduled-time.patch
Fix POSIX timers expiring before their scheduled time

fix-oops-when-inserting-ipmi_si-module.patch
Fix oops when inserting ipmi_si module

binfmt_elf-bss-padding-fix.patch
binfmt_elf bss padding fix

posix-cpu-timers-and-cputime_t-divisons.patch
posix-cpu-timers and cputime_t divisons.

timers-prepare-for-del_timer_sync-changes.patch
timers: prepare for del_timer_sync() changes

timers-rework-del_timer_sync.patch
timers: rework del_timer_sync()

timers-serialize-timers.patch
timers: serialize timers

timers-remove-memory-barriers.patch
timers: remove memory barriers

timers-cleanup-kill-__get_base.patch
timers: cleanup, kill __get_base()

timers-enable-irqs-in-__mod_timer.patch
timers: enable irqs in __mod_timer()

timers-enable-irqs-in-__mod_timer-tidy.patch
timers-enable-irqs-in-__mod_timer-tidy

ext2-3-file-limits-to-avoid-overflowing-i_blocks.patch
ext2/3 file limits to avoid overflowing i_blocks

load_elf_library-kfree-fix.patch
load_elf_library kfree fix

futex-queue_me-get_user-ordering-fix.patch
Futex: make futex_wait() atomic again

io_remap_pfn_range-add-for-all-arch-es.patch
io_remap_pfn_range: add for all arch-es

io_remap_pfn_range-add-for-all-arch-es-fix.patch
io_remap_pfn_range-add-for-all-arch-es-fix

io_remap_pfn_range-convert-sparc-callers.patch
io_remap_pfn_range: convert sparc callers

io_remap_pfn_range-fix-some-callers-for-xen.patch
io_remap_pfn_range: fix some callers for XEN

io_remap_pfn_range-convert-last-callers.patch
io_remap_pfn_range: convert last callers

alpha-build-fixes.patch
alpha build fixes

fix-pcmcia-resume-with-card-inserted.patch
Fix PCMCIA resume with card inserted

pcmcia-clean-up-suspend.patch
pcmcia: clean up suspend

small-warning-fix-for-gcc4.patch
small warning fix for gcc4

enable-sig_ign-on-blocked-signals.patch
Enable SIG_IGN on blocked signals

alpha-elimitate-two-warnings-from-gcc4.patch
alpha: elimitate two warnings from gcc4

fat-set-ms_noatime-to-msdos.patch
FAT: set MS_NOATIME to msdos

fat-fix-msdos-datetime.patch
FAT: Fix msdos ->[ac]{date,time}

fix-compile-warning-in-drivers-pnp-resourcec-with-config_pci.patch
Fix compile warning in drivers/pnp/resource.c with !CONFIG_PCI

nlm-fix-f_count-leak.patch
nlm: fix f_count leak

module-parameter-fixes.patch
module parameter fixes

fs-hpfs-fix-hpfs-support-under-64-bit-kernel.patch
fs/hpfs/*: fix HPFS support under 64-bit kernel

arch-hook-for-notifying-changes-in-pte-protections-bits.patch
arch hook for notifying changes in PTE protections bits

serial-digi-neo-driver.patch
serial: Digi Neo driver

netmos-parallel-serial-combo-support.patch
Netmos parallel/serial/combo support

consolidate-asm-ipch.patch
consolidate asm/ipc.h

bt819-array-indexing-fix.patch
bt819 array indexing fix

unified-spinlock-initialization.patch
unified spinlock initialization

drivers-block-dac960c-fix-a-use-after-free.patch
drivers/block/DAC960.c: fix a use after free

drivers-telephony-ixj-fix-a-use-after-free.patch
drivers/telephony/ixj: fix a use after free

fs-attrc-fix-check-after-use.patch
fs/attr.c: fix check after use

fs-smbfs-requestc-fix-null-dereference.patch
fs/smbfs/request.c: fix NULL dereference

hfs-free-page-buffers-in-releasepage.patch
hfs: free page buffers in releasepage

hfs-fix-umask-behaviour.patch
hfs: fix umask behaviour

hfs-more-bnode-error-checks.patch
hfs: more bnode error checks

hfs-fix-sign-problem-in-hfs_ext_keycmp.patch
hfs: fix sign problem in hfs_ext_keycmp

hfs-use-parse-library-for-mount-options.patch
hfs: use parse library for mount options

hfs-add-nls-support.patch
hfs: add nls support

hfs-unicode-decompose-support.patch
hfs: unicode decompose support

inotify-42.patch
inotify #42

dvb-clarify-firmware-upload-messages.patch
dvb: clarify firmware upload messages

dvb-dibcom-frontend-fixes.patch
dvb: dibcom: frontend fixes

dvb-dibusb-misc-fixes.patch
dvb: dibusb: misc. fixes

dvb-skystar2-remove-duplicate-pci_release_region.patch
dvb: skystar2: remove duplicate pci_release_region()

dvb-mt352-pinnacle-300i-comments.patch
dvb: mt352: Pinnacle 300i comments

dvb-support-activy-budget-card.patch
dvb: support Activy Budget card

dvb-skystar2-update-email-address.patch
dvb: skystar2: update email address

dvb-ves1x93-invert_pwm-fix.patch
dvb: ves1x93: invert_pwm fix

dvb-dibusb-readme-update.patch
dvb: dibusb readme update

dvb-dibusb-support-hauppauge-wintv-nova-t-usb2.patch
dvb: dibusb: support Hauppauge WinTV NOVA-T USB2

dvb-nxt2002-qam64-256-support.patch
dvb: nxt2002: QAM64/256 support

dvb-get_dvb_firmware-new-unshield-version.patch
dvb: get_dvb_firmware: new unshield version

dvb-dib3000-corrected-device-naming.patch
dvb: dib3000: corrected device naming

dvb-dibusb-debug-changes.patch
dvb: dibusb: debug changes

dvb-dibusb-increased-the-number-of-urbs-for-usb11-devices.patch
dvb: dibusb: increased the number of urbs for usb1.1 devices

dvb-ttusb_dec-use-alternative-interface-to-save-bandwidth.patch
dvb: ttusb_dec: use alternative interface to save bandwidth

dvb-l64781-email-address-fix.patch
dvb: l64781: email address fix

dvb-skystar2-fix-mac-address-reading.patch
dvb: skystar2: fix MAC address reading

dvb-support-kworld-adstech-instant-dvb-t-usb20.patch
dvb: support KWorld/ADSTech Instant DVB-T USB2.0

dvb-cleanups-make-stuff-static.patch
dvb: cleanups, make stuff static

dvb-refactor-sw-pid-filter-to-drop-redundant-code.patch
dvb: refactor sw pid filter to drop redundant code

dvb-nxt2002-fix-max-frequency.patch
dvb: nxt2002: fix max frequency

dvb-ttusb-budget-s-usb_unlink_urb-usb_kill_urb.patch
dvb: ttusb-budget: s/usb_unlink_urb/usb_kill_urb/

dvb-av7110-fix-oops-when-av7110_ir_init-failed.patch
dvb: av7110: fix Oops when av7110_ir_init() failed

dvb-saa7146-static-initialization.patch
dvb: saa7146: static initialization

dvb-av7110-error-handling-during-attach.patch
dvb: av7110: error handling during attach

dvb-corrected-links-to-firmware-files.patch
dvb: corrected links to firmware files

dvb-support-pchdtv-hd2000.patch
dvb: support pcHDTV HD2000

dvb-dibusb-support-nova-t-usb-ir.patch
dvb: dibusb: support nova-t usb ir

dvb-oren-or51211-or51132_qam-and-or51132_vsb-firmware-download-info.patch
dvb: OREN or51211, or51132_qam and or51132_vsb firmware download info

dvb-ttusb_dec-ir-support.patch
dvb: ttusb_dec: IR support

dvb-dibusb-pll-fix.patch
dvb: dibusb: pll fix

dvb-tda10021-fix-continuity-errors.patch
dvb: tda10021: fix continuity errors

dvb-saa7146-remove-duplicate-setgpio.patch
dvb: saa7146: remove duplicate setgpio

dvb-fix-cams-on-typhoon-dvb-s.patch
dvb: fix CAMs on Typhoon DVB-S

dvb-frontends-kfree-cleanup.patch
dvb: frontends: kfree() cleanup

dvb-clear-up-confusion-between-ids-and-adapters.patch
dvb: clear up confusion between ids and adapters

dvb-dibusb-remove-useless-ifdef.patch
dvb: dibusb: remove useless ifdef

dvb-support-for-technotrend-pci-dvb-t.patch
dvb: support for Technotrend PCI DVB-T

dvb-dibusb-hanftek-umt-010-fixes.patch
dvb: dibusb: HanfTek UMT-010 fixes

dvb-vfree-checking-cleanups.patch
dvb: vfree() checking cleanups

dvb-convert-from-pci_module_init-to-pci_register_driver.patch
dvb: convert from pci_module_init to pci_register_driver

dvb-dibusb-support-dtt200u-yakumo-typhoon-hama-usb20-device.patch
dvb: dibusb: support dtt200u (Yakumo/Typhoon/Hama) USB2.0 device

dvb-sparse-warnings-on-one-bit-bitfields.patch
dvb: sparse warnings on one-bit bitfields

dvb-support-nova-s-rev-22.patch
dvb: support Nova-S rev 2.2

dvb-ttusb_dec-cleanup.patch
dvb: ttusb_dec: cleanup

dvb-gcc-295-compile-fixes.patch
dvb: gcc 2.95 compile fixes

dvb-mt352-cleanups.patch
dvb: mt352: cleanups

ext3-jbd-race-releasing-in-use-journal_heads.patch
ext3/jbd race: releasing in-use journal_heads

ext3-writepages-support-for-writeback-mode.patch
ext3 writepages support for writeback mode

ext3-writeback-nobh-option.patch
ext3 writeback "nobh" option

ext3-fix-journal_unmap_buffer-race.patch
ext3: fix journal_unmap_buffer race

ext3-dynamic-allocating-block-reservation-info.patch
ext3: dynamic allocation of block reservation info

ext3-reservation-info-cleanup-remove-rsv_seqlock.patch
ext3: reservation info cleanup: remove rsv_seqlock

ext3-reservation-info-cleanup-remove-rsv_seqlock-fix.patch
ext3-reservation-info-cleanup-remove-rsv_seqlock fix

ext3-move-goal-logical-block-into-block-allocation-info.patch
ext3: move goal logical block into block allocation info structure

pcmcia-hotplug-event-for-pcmcia-devices.patch
pcmcia: hotplug event for PCMCIA devices

pcmcia-hotplug-event-for-pcmcia-socket-devices.patch
pcmcia: hotplug event for PCMCIA socket devices

pcmcia-device-and-driver-matching.patch
pcmcia: device and driver matching

pcmcia-check-for-invalid-crc32-hashes-in-id_tables.patch
pcmcia: check for invalid crc32 hashes in id_tables

pcmcia-match-for-fake-cis.patch
pcmcia: match for fake CIS

pcmcia-export-cis-in-sysfs.patch
pcmcia: export CIS in sysfs

pcmcia-cis-overrid-via-sysfs.patch
pcmcia: CIS overrid via sysfs

pcmcia-match-anonymous-cards.patch
pcmcia: match "anonymous" cards

pcmcia-allow-function-id-based-match.patch
pcmcia: allow function-ID based match

pcmcia-file2alias.patch
pcmcia: file2alias

pcmcia-request-cis-via-firmware-interface.patch
pcmcia: request CIS via firmware interface

pcmcia-cleanups.patch
pcmcia: cleanups

pcmcia-rescan-bus-always-upon-echoing-into-setup_done.patch
pcmcia: rescan bus always upon echoing into setup_done

pcmcia-id_table-for-serial_cs.patch
pcmcia: id_table for serial_cs

pcmcia-id_table-for-3c574_cs.patch
pcmcia: id_table for 3c574_cs

pcmcia-id_table-for-3c589_cs.patch
pcmcia: id_table for 3c589_cs

pcmcia-id_table-for-aha152x.patch
pcmcia: id_table for aha152x

pcmcia-id_table-for-airo_cs.patch
pcmcia: id_table for airo_cs

pcmcia-id_table-for-axnet_cs.patch
pcmcia: id_table for axnet_cs

pcmcia-id_table-for-fdomain_stub.patch
pcmcia: id_table for fdomain_stub

pcmcia-id_table-for-fmvj18x_cs.patch
pcmcia: id_table for fmvj18x_cs

pcmcia-id_table-for-ibmtr_cs.patch
pcmcia: id_table for ibmtr_cs

pcmcia-id_table-for-netwave_cs.patch
pcmcia: id_table for netwave_cs

pcmcia-id_table-for-nmclan_cs.patch
pcmcia: id_table for nmclan_cs

pcmcia-id_table-for-teles_cs.patch
pcmcia: id_table for teles_cs

pcmcia-id_table-for-ray_cs.patch
pcmcia: id_table for ray_cs

pcmcia-id_table-for-wavelan_cs.patch
pcmcia: id_table for wavelan_cs

pcmcia-id_table-for-sym53c500_csc.patch
pcmcia: id_table for sym53c500_cs.c

pcmcia-id_table-for-qlogic_stubc.patch
pcmcia: id_table for qlogic_stub.c

pcmcia-id_table-for-smc91c92_csc.patch
pcmcia: id_table for smc91c92_cs.c

pcmcia-id_table-for-orinoco_cs.patch
pcmcia: id_table for orinoco_cs

pcmcia-id_table-for-xirc2ps_csc.patch
pcmcia: id_table for xirc2ps_cs.c

pcmcia-id_table-for-ide_csc.patch
pcmcia: id_table for ide_cs.c

pcmcia-id_table-for-parport_csc.patch
pcmcia: id_table for parport_cs.c

pcmcia-id_table-for-pcnet_csc.patch
pcmcia: id_table for pcnet_cs.c

pcmcia-id_table-for-pcmciamtdc.patch
pcmcia: id_table for pcmciamtd.c

pcmcia-id_table-for-vxpocketc.patch
pcmcia: id_table for vxpocket.c

pcmcia-id_table-for-atmel_csc.patch
pcmcia: id_table for atmel_cs.c

pcmcia-id_table-for-avma1_csc.patch
pcmcia: id_table for avma1_cs.c

pcmcia-id_table-for-avm_csc.patch
pcmcia: id_table for avm_cs.c

pcmcia-id_table-for-bluecard_csc.patch
pcmcia: id_table for bluecard_cs.c

pcmcia-id_table-for-bt3c_csc.patch
pcmcia: id_table for bt3c_cs.c

pcmcia-id_table-for-btuart_csc.patch
pcmcia: id_table for btuart_cs.c

pcmcia-id_table-for-com20020_csc.patch
pcmcia: id_table for com20020_cs.c

pcmcia-id_table-for-dtl1_csc.patch
pcmcia: id_table for dtl1_cs.c

pcmcia-id_table-for-elsa_csc.patch
pcmcia: id_table for elsa_cs.c

pcmcia-id_table-for-ixj_pcmciac.patch
pcmcia: id_table for ixj_pcmcia.c

pcmcia-id_table-for-nsp_csc.patch
pcmcia: id_table for nsp_cs.c

pcmcia-id_table-for-sedlbauer_csc.patch
pcmcia: id_table for sedlbauer_cs.c

pcmcia-id_table-for-wl3501_csc.patch
pcmcia: id_table for wl3501_cs.c

pcmcia-id_table-for-pdaudiocfc.patch
pcmcia: id_table for pdaudiocf.c

pcmcia-id_table-for-synclink_csc.patch
pcmcia: id_table for synclink_cs.c

pcmcia-add-some-documentation.patch
pcmcia: add some Documentation

pcmcia-update-resource-database-adjust-routines-to-use-unsigned-long-values.patch
pcmcia: update resource database adjust routines to use unsigned long values

pcmcia-mark-parent-bridge-windows-as-resources-available-for-pcmcia-devices.patch
pcmcia: mark parent bridge windows as resources available for PCMCIA devices

pcmcia-add-a-config-option-for-the-pcmica-ioctl.patch
pcmcia: add a config option for the PCMICA ioctl

pcmcia-move-pcmcia-ioctl-to-a-separate-file.patch
pcmcia: move PCMCIA ioctl to a separate file

pcmcia-clean-up-cs-ds-callback.patch
pcmcia: clean up cs ds callback

pcmcia-clean-up-cs-ds-callback-fix.patch
pcmcia-clean-up-cs-ds-callback-fix

pcmcia-make-pcmcia-status-a-bitfield.patch
pcmcia: make PCMCIA status a bitfield

pcmcia-merge-struct-pcmcia_bus_socket-into-struct-pcmcia_socket.patch
pcmcia: merge struct pcmcia_bus_socket into struct pcmcia_socket

pcmcia-remove-unneeded-includes-in-dsc.patch
pcmcia: remove unneeded includes in ds.c

pcmcia-rename-some-functions.patch
pcmcia: rename some functions

pcmcia-move-pcmcia-resource-handling-out-of-csc.patch
pcmcia: move pcmcia resource handling out of cs.c

pcmcia-csc-cleanup.patch
pcmcia: cs.c cleanup

pcmcia-dsc-cleanup.patch
pcmcia: ds.c cleanup

pcmcia-release_class.patch
pcmcia: release_class

pcmcia-use-request_region-in-i82365.patch
pcmcia: use request_region in i82365

pcmcia-synclink_cs-irq_info2_info-is-gone.patch
pcmcia: synclink_cs IRQ_INFO2_INFO is gone

pcmcia-mod_devicetableh-fix-for-different-sizes-in-kernel-and-userspace.patch
pcmcia: mod_devicetable.h fix for different sizes in kernel- and userspace

pcmcia-select-crc32-in-kconfig-for-pcmcia.patch
pcmcia: select crc32 in Kconfig for PCMCIA

svcrpc-auth_domain-documentation.patch
svcrpc: auth_domain documentation

nfsd4-fix-share-conflict-tests.patch
nfsd4: fix share conflict tests

nfsd4-remove-unneeded-stateowner-arguments.patch
nfsd4: remove unneeded stateowner arguments

nfsd4-fix-use-after-put-in-cb_recall.patch
nfsd4: fix use after put() in cb_recall

nfsd4-allow-read-on-open-for-write.patch
nfsd4: allow read on open for write

nfsd4-factor-out-common-open_truncate-code.patch
nfsd4: factor out common open_truncate code

nfsd4-fix-failure-to-truncate-on-some-opens.patch
nfsd4: fix failure to truncate on some opens

nfsd4_remove_unused_acl_function.patch
nfsd4_remove_unused_acl_function

nfsd4-dont-set-write_owner-in-either-allow-or-deny-bits.patch
nfsd4: don't set WRITE_OWNER in either allow or deny bits

nfsd4-acl-dont-set-named-attrs.patch
nfsd4: acl don't set named attrs

nfsd4-acl-error-fix.patch
nfsd4: acl error fix

nfsd4-rename-release_delegation.patch
nfsd4: rename release_delegation

nfsd4-remove-trailing-whitespace-from-nfs4procc.patch
nfsd4: remove trailing whitespace from nfs4proc.c

nfsd4-fix-open-returns-for-other-claim-types.patch
nfsd4: fix open returns for other claim types

nfsd4-fix-indentation-in-nfsd4_open.patch
nfsd4: fix indentation in nfsd4_open

nfsacl-solaris-nfsacl-workaround.patch
nfsacl: Solaris nfsacl workaround

kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-ga.patch fix for i386 single-step into sysenter
fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386
kgdb-is-incompatible-with-kprobes
kgdb-ga-build-fix
kgdb-ga-fixes
kgdb: kill off highmem_start_page
kgdb documentation fix

kgdb-x86-config_debug_info-fix.patch
kgdb CONFIG_DEBUG_INFO fix

kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address

kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-x86_64-fix
kgdb-x86_64-serial-fix
kprobes exception notifier fix

kgdb-x86_64-config_debug_info-fix.patch
kgdb CONFIG_DEBUG_INFO fix

rock-lindent.patch
rock: lindent it

rock-manual-tidies.patch
rock: manual tidies

rock-remove-CHECK_SP.patch
rock: remove CHECK_SP

rock-remove-CONTINUE_DECLS.patch
rock: remove CONTINUE_DECLS

rock-remove-CHECK_CE.patch
rock: remove CHECK_CE

rock-remove-SETUP_ROCK_RIDGE.patch
rock: remove SETUP_ROCK_RIDGE

rock-remove-MAYBE_CONTINUE.patch
rock: remove MAYBE_CONTINUE

rock-comment-tidies.patch
rock: comment tidies

rock-lindent-rock-h.patch
rock: lindent rock.h

isofs-remove-debug-stuff.patch
isofs: remove debug stuff

rock-handle-corrupted-directories.patch
rock.c: handle corrupted directories

rock-rename-union-members.patch
rock: rename union members

rock-handle-directory-overflows.patch
rock: handle directory overflows

journal_add_journal_head-debug.patch
journal_add_journal_head-debug

list_del-debug.patch
list_del debug check

page-owner-tracking-leak-detector.patch
Page owner tracking leak detector

make-page_owner-handle-non-contiguous-page-ranges.patch
make page_owner handle non-contiguous page ranges

add-gfp_mask-to-page-owner.patch
add gfp_mask to page owner

unplug-can-sleep.patch
unplug functions can sleep

firestream-warnings.patch
firestream warnings

periodically-scan-redzone-entries-and-slab-control-structures.patch
periodically scan redzone entries and slab control structures

slab-leak-detector.patch
slab leak detector

slab-leak-detector-warning-fixes.patch
slab leak detector warning fixes

irqpoll.patch
irqpoll

figure-out-who-is-inserting-bogus-modules.patch
Figure out who is inserting bogus modules

figure-out-who-is-inserting-bogus-modules-warning-fix.patch
Warning fix and be extra careful about array in kernel/module.c

releasing-resources-with-children.patch
Releasing resources with children

perfctr-core.patch
perfctr: core
perfctr: remove bogus perfctr_sample_thread() calls

perfctr-i386.patch
perfctr: i386

perfctr-x86-core-updates.patch
perfctr x86 core updates

perfctr-x86-driver-updates.patch
perfctr x86 driver updates

perfctr-x86-driver-cleanup.patch
perfctr: x86 driver cleanup

perfctr-prescott-fix.patch
Prescott fix for perfctr

perfctr-x86-update-2.patch
perfctr x86 update 2

perfctr-x86_64.patch
perfctr: x86_64

perfctr-x86_64-core-updates.patch
perfctr x86_64 core updates

perfctr-ppc.patch
perfctr: PowerPC

perfctr-ppc32-driver-update.patch
perfctr: ppc32 driver update

perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes

perfctr-ppc32-update.patch
perfctr ppc32 update

perfctr-ppc32-update-2.patch
perfctr ppc32 update

perfctr-virtualised-counters.patch
perfctr: virtualised counters

perfctr-remap_page_range-fix.patch

virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep

make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text

perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup

perfctr-update-2-6-kconfig-related-updates.patch
perfctr: Kconfig-related updates

perfctr-virtual-updates.patch
perfctr virtual updates

perfctr-virtual-cleanup.patch
perfctr: virtual cleanup

perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support

perfctr-update-5-6-reduce-stack-usage.patch
perfctr: reduce stack usage

perfctr-interrupt-support-kconfig-fix.patch
perfctr interrupt_support Kconfig fix

perfctr-low-level-documentation.patch
perfctr low-level documentation

perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance: driver updates

perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance: kernel updates

perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance: documentation updates

perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix

perfctr-api-changes-first-step.patch
perfctr API changes: first step

perfctr-virtual-update.patch
perfctr virtual update

perfctr-x86-64-ia32-emulation-fix.patch
perfctr x86-64 ia32 emulation fix

perfctr-sysfs-update-1-4-core.patch
perfctr sysfs update: core

perfctr-sysfs-update.patch
Perfctr sysfs update

perfctr-sysfs-update-2-4-x86.patch
perfctr sysfs update: x86

perfctr-sysfs-update-3-4-x86-64.patch
perfctr sysfs update: x86-64
perfctr: syscall numbers in x86-64 ia32-emulation
perfctr x86_64 native syscall numbers fix

perfctr-sysfs-update-4-4-ppc32.patch
perfctr sysfs update: ppc32

perfctr-2710-api-update-1-4-common.patch
perfctr-2.7.10 API update 1/4: common

perfctr-2710-api-update-2-4-i386.patch
perfctr-2.7.10 API update 2/4: i386

perfctr-2710-api-update-3-4-x86_64.patch
perfctr-2.7.10 API update 3/4: x86_64

perfctr-2710-api-update-4-4-ppc32.patch
perfctr-2.7.10 API update 4/4: ppc32

perfctr-api-update-1-9-physical-indexing-x86.patch
perfctr API update 1/9: physical indexing, x86

perfctr-api-update-2-9-physical-indexing-ppc32.patch
perfctr API update 2/9: physical indexing, ppc32

perfctr-api-update-3-9-cpu_control_header-x86.patch
perfctr API update 3/9: cpu_control_header, x86

perfctr-api-update-4-9-cpu_control_header-ppc32.patch
perfctr API update 4/9: cpu_control_header, ppc32

perfctr-api-update-5-9-cpu_control_header-common.patch
perfctr API update 5/9: cpu_control_header, common

perfctr-api-update-6-9-cpu_control-access-common.patch
perfctr API update 6/9: cpu_control access, common

perfctr-api-update-7-9-cpu_control-access-x86.patch
perfctr API update 7/9: cpu_control access, x86

perfctr-api-update-8-9-cpu_control-access-ppc32.patch
perfctr API update 8/9: cpu_control access, ppc32

perfctr-api-update-9-9-domain-based-read-write-syscalls.patch
perfctr API update 9/9: domain-based read/write syscalls

perfctr-ia32-syscalls-on-x86-64-fix.patch
perfctr ia32 syscalls on x86-64 fix

perfctr-cleanups-1-3-common.patch
perfctr cleanups: common

perfctr-cleanups-2-3-ppc32.patch
perfctr cleanups: ppc32

perfctr-cleanups-3-3-x86.patch
perfctr cleanups: x86

perfctr-x86-fix-and-cleanups.patch
perfctr: x86 fix and cleanups

perfctr-ppc32-fix-and-cleanups.patch
perfctr: ppc32 fix and cleanups

perfctr-64-bit-values-in-register-descriptors.patch
perfctr: 64-bit values in register descriptors

perfctr-64-bit-values-in-register-descriptors-fix.patch
perfctr-64-bit-values-in-register-descriptors fix

sched2-fix-schedstats-warning.patch
sched: fix schedstats warning

sched2-cleanup-wake_idle.patch
sched: cleanup wake_idle

sched2-improve-load-balancing-pinned-tasks.patch
sched: improve load balancing pinned tasks

sched2-reduce-active-load-balancing.patch
sched: reduce active load balancing

sched2-fix-smt-scheduling-problems.patch
sched: fix SMT scheduling problems

sched2-add-debugging.patch
sched: add debugging

sched2-less-aggressive-idle-balancing.patch
sched: less aggressive idle balancing

sched2-balance-timers.patch
sched: balance timers

sched2-tweak-affine-wakeups.patch
sched: tweak affine wakeups

sched2-no-aggressive-idle-balancing.patch
sched: no aggressive idle balancing

sched2-balance-on-fork.patch
sched: balance on fork

sched2-schedstats-update-for-balance-on-fork.patch
sched: schedstats update for balance on fork

sched2-sched-tuning.patch
sched: sched tuning

sched2-sched-tuning-fix.patch
sched2-sched-tuning-fix

sched2-sched-domain-sysctl.patch
sched: sched domain sysctl

sched-uninline-task_timeslice.patch
sched: uninline task_timeslice

add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
Add do_proc_doulonglongvec_minmax to sysctl functions
add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix
add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2

allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention

i386-cpu-hotplug-updated-for-mm.patch
i386 CPU hotplug updated for -mm
ppc64: fix hotplug cpu

disable-atykb-warning.patch
disable atykb "too many keys pressed" warning

export-file_ra_state_init-again.patch
Export file_ra_state_init() again

cachefs-filesystem.patch
CacheFS filesystem

numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
numa-policies-for-file-mappings-mpol_mf_move for cachefs

cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us

fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs

cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped

cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount

fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies

remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h

cachefs-warning-fix-2.patch
cachefs warning fix 2

cachefs-linkage-fix-2.patch
cachefs linkage fix

cachefs-build-fix.patch
cachefs build fix

cachefs-documentation.patch
CacheFS documentation

add-page-becoming-writable-notification.patch
Add page becoming writable notification

add-page-becoming-writable-notification-fix.patch
do_wp_page_mk_pte_writable() fix

add-page-becoming-writable-notification-build-fix.patch
add-page-becoming-writable-notification build fix

provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit

provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix

provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2

make-afs-use-cachefs.patch
Make AFS use CacheFS

afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix

split-general-cache-manager-from-cachefs.patch
Split general cache manager from CacheFS

turn-cachefs-into-a-cache-backend.patch
Turn CacheFS into a cache backend

rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
Rework the CacheFS documentation to reflect FS-Cache split

update-afs-client-to-reflect-cachefs-split.patch
Update AFS client to reflect CacheFS split

fscache-menuconfig-help-fix-documentation-path.patch
fscache-menuconfig-help-fix-documentation-pathc

x86-rename-apic_mode_exint.patch
kexec: x86: rename APIC_MODE_EXINT

x86-local-apic-fix.patch
kexec: x86: local apic fix

x86_64-e820-64bit.patch
kexec: x86_64: e820 64bit fix

x86-i8259-shutdown.patch
kexec: x86: i8259 shutdown: disable interrupts

x86_64-i8259-shutdown.patch
kexec: x86_64: add i8259 shutdown method

x86-apic-virtwire-on-shutdown.patch
kexec: x86: resture apic virtual wire mode on shutdown

x86_64-apic-virtwire-on-shutdown.patch
kexec: x86_64: restore apic virtual wire mode on shutdown

vmlinux-fix-physical-addrs.patch
kexec: vmlinux: fix physical addresses

x86-vmlinux-fix-physical-addrs.patch
kexec: x86: vmlinux: fix physical addresses

x86_64-vmlinux-fix-physical-addrs.patch
kexec: x86_64: vmlinux: fix physical addresses

x86-config-kernel-start.patch
kexec: x86: add CONFIG_PYSICAL_START

kexec-reserve-bootmem-fix-for-booting-nondefault-location-kernel.patch
kexec: reserve Bootmem fix for booting nondefault location kernel

x86_64-config-kernel-start.patch
kexec: x86_64: add CONFIG_PHYSICAL_START

kexec-kexec-generic.patch
kexec: add kexec syscalls

kexec-kexec-generic-kexec-use-unsigned-bitfield.patch
kexec: use unsigned bitfield

x86-machine_shutdown.patch
kexec: x86: factor out apic shutdown code

x86-kexec.patch
kexec: x86 kexec core

x86-crashkernel.patch
crashdump: x86 crashkernel option

x86-crashkernel-fix.patch
kexec: fix for broken kexec on panic

x86_64-machine_shutdown.patch
kexec: x86_64: factor out apic shutdown code

x86_64-kexec.patch
kexec: x86_64 kexec implementation

x86_64-crashkernel.patch
crashdump: x86_64: crashkernel option

kexec-ppc-support.patch
kexec: kexec ppc support

kexec-ppc-fix-noret_type.patch
kexec: ppc: fix NORET_TYPE

x86-crash_shutdown-nmi-shootdown.patch
crashdump: x86: add NMI handler to capture other CPUs

x86-crash_shutdown-snapshot-registers.patch
kexec: x86: snapshot registers during crash shutdown

x86-crash_shutdown-apic-shutdown.patch
kexec: x86 shutdown APICs during crash_shutdown

crashdump-documentation.patch
crashdump: documentation

crashdump-memory-preserving-reboot-using-kexec.patch
crashdump: memory preserving reboot using kexec

crashdump-routines-for-copying-dump-pages.patch
crashdump: routines for copying dump pages

crashdump-routines-for-copying-dump-pages-fixes.patch
crashdump-routines-for-copying-dump-pages-fixes

crashdump-elf-format-dump-file-access.patch
crashdump: elf format dump file access

crashdump-linear-raw-format-dump-file-access.patch
crashdump: linear raw format dump file access

crashdump-linear-raw-format-dump-file-access-coding-style.patch
crashdump-linear-raw-format-dump-file-access-coding-style

kdump-export-crash-notes-section-address-through.patch
Kdump: Export crash notes section address through sysfs

kdump-export-crash-notes-section-address-through-build-fix.patch
kdump-export-crash-notes-section-address-through build fix

kdump-export-crash-notes-section-address-through-x86_64-fix.patch
kdump-export-crash-notes-section-address-through x86_64 fix

reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()

reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols

reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()

reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules

reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules

reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()

reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point

reiser4-rcu-barrier-license-fix.patch
reiser4-rcu-barrier-license-fix

reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules

reiser4-export-inode_lock-unexport-__iget.patch
reiser4-export-inode_lock-unexport-__iget

reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules

reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules

reiser4-export-find_get_pages.patch

reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()

reiser4-perthread-pages.patch
reiser4: per-thread page pools

reiser4-perthread_pages_alloc-cleanup.patch
perthread_pages_alloc cleanup

reiser4-include-reiser4.patch
reiser4: add to build system

reiser4-doc.patch
reiser4: documentation

reiser4-only.patch
reiser4: main fs

fs-reiser4-possible-cleanups.patch
fs/reiser4/: possible cleanups

reiser4-kconfig-help-cleanup.patch
reiser4 Kconfig help cleanup

reiser4-cleanup-pg_arch_1.patch
reiser4 cleanup (PG_arch_1)

reiser4-build-fix.patch
reiser4 build fix

reiser4-update.patch
reiser4 update

reiser4-only-memory_backed-fix.patch
reiser4-only-memory_backed-fix

add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.

possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch

serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver

add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45

generic-serial-cli-conversion.patch
generic-serial cli() conversion

specialix-io8-cli-conversion.patch
Specialix/IO8 cli() conversion

sx-cli-conversion.patch
SX cli() conversion

au1x00_uart-deadlock-fix.patch
au1x00_uart deadlock fix

remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm

kfree_skb-dump_stack.patch
kfree_skb-dump_stack

minimal-ide-disk-updates.patch
Minimal ide-disk updates

vt-dont-call-unblank-at-irq-time.patch
vt: don't call unblank at irq time

ppc32-move-powermac-backlight-stuff-to-a-workqueue.patch
ppc32: move powermac backlight stuff to a workqueue

radeonfb-implement-proper-workarounds-for-pll-accesses.patch
radeonfb: Implement proper workarounds for PLL accesses

radeonfb-ddc-i2c-fix.patch
radeonfb: DDC i2c fix

fbdev-nvidia-licensing-clarification.patch
fbdev: mvidia licensing clarification

fbcon-stop-framebuffer-operations-before-hardware-is-properly-initialized.patch
fbcon: Stop framebuffer operations before hardware is properly initialized

nvidiafb-maximize-blit-buffer-capacity.patch
nvidiafb: Maximize blit buffer capacity

pm2fb-x-and-vt-switching-crash-fix.patch
pm2fb: X and VT switching crash fix

nvidiafb-kconfig-help-text-update-for-config-fb_nvidia.patch
nvidiafb: Kconfig help text update for config FB_NVIDIA

fbdev-cleanups-in-drivers-video-part-2.patch
fbdev: Cleanups in drivers/video part 2

fbdev-cleanups-in-drivers-video-part-2-fix.patch
fbdev-cleanups-in-drivers-video-part-2 fix

excessive-atyfb-debug-messages.patch
Excessive atyfb debug messages

atyfb-add-boot-module-option-to-override-composite-sync.patch
atyfb: Add boot/module option to override composite sync

fbdev-kconfig-fix-for-macmodes-and-ppc.patch
fbdev: Kconfig fix for macmodes and PPC

fbdev-convert-drivers-to-pci_register_driver.patch
fbdev: Convert drivers to pci_register_driver

sisfb-trivial-cleanups.patch
sisfb: Trivial cleanups

tridentfb-clean-up-printks.patch
tridentfb: Clean up printk()'s

s1d13xxxfb-add-support-for-epson-s1d13806-fb.patch
s1d13xxxfb: Add support for Epson S1D13806 FB

nvidiafb-process-boot-options-earlier.patch
nvidiafb: Process boot options earlier

fbcon-save-var-rotate-field-in-struct-display.patch
fbcon: Save var rotate field in struct display

fbcon-call-set_par-per-fb_info-once-during-init.patch
fbcon: Call set_par per fb_info once during init

fbcon-do-not-set-palette-if-console-is-not-visible.patch
fbcon: Do not set palette if console is not visible

nvidiafb-delete-i2c-bus-on-driver-unload.patch
nvidiafb: Delete i2c bus on driver unload

neofb-mmio-fixes.patch
neofb: mmio fixes

neofb-set-hwaccel-flags-properly.patch
neofb: Set hwaccel flags properly

remove-redundant-null-checks-before-kfree-in-drivers-video.patch
remove redundant NULL checks before kfree() in drivers/video/

remove-redundant-null-checks-before-kfree-in-drivers-video-fix.patch
remove-redundant-null-checks-before-kfree-in-drivers-video fix

md-merge-md_enter_safemode-into-md_check_recovery.patch
md: merge md_enter_safemode into md_check_recovery

md-improve-locking-on-safemode-and-move-superblock-writes.patch
md: improve locking on 'safemode' and move superblock writes

md-improve-the-interface-to-sync_request.patch
md: improve the interface to sync_request

md-optimised-resync-using-bitmap-based-intent-logging.patch
md: optimised resync using Bitmap based intent logging

md-a-couple-of-tidyups-relating-to-the-bitmap-file.patch
md: a couple of tidyups relating to the bitmap file.

md-call-bitmap_daemon_work-regularly.patch
md: call bitmap_daemon_work regularly

md-print-correct-pid-for-newly-created-bitmap-writeback-daemon.patch
md: print correct pid for newly created bitmap-writeback-daemon.

md-minor-code-rearrangement-in-bitmap_init_from_disk.patch
md: minor code rearrangement in bitmap_init_from_disk

md-make-sure-md-bitmap-is-cleared-on-a-clean-start.patch
md: make sure md bitmap is cleared on a clean start.

md-printk-fix.patch
md printk fix

md-improve-debug-printing-of-bitmap-superblock.patch
md: improve debug-printing of bitmap superblock.

md-check-return-value-of-write_page-rather-than-ignore-it.patch
md: check return value of write_page, rather than ignore it

md-enable-the-bitmap-write-back-daemon-and-wait-for-it.patch
md: enable the bitmap write-back daemon and wait for it.

md-dont-skip-bitmap-pages-due-to-lack-of-bit-that-we-just-cleared.patch
md: don't skip bitmap pages due to lack of bit that we just cleared.

md-optimised-resync-using-bitmap-based-intent-logging-fix.patch
md-optimised-resync-using-bitmap-based-intent-logging fix

md-raid1-support-for-bitmap-intent-logging.patch
md: raid1 support for bitmap intent logging

md-fix-bug-when-raid1-attempts-a-partial-reconstruct.patch
md: fix bug when raid1 attempts a partial reconstruct.

md-raid1-support-for-bitmap-intent-logging-fix.patch
md: initialise sync_blocks in raid1 resync

md-optimise-reconstruction-when-re-adding-a-recently-failed-drive.patch
md: optimise reconstruction when re-adding a recently failed drive.

md-fix-deadlock-due-to-md-thread-processing-delayed-requests.patch
md: fix deadlock due to md thread processing delayed requests.

md-allow-md-intent-bitmap-to-be-stored-near-the-superblock.patch
md: allow md intent bitmap to be stored near the superblock.

md-allow-md-to-update-multiple-superblocks-in-parallel.patch
md: allow md to update multiple superblocks in parallel.

detect-atomic-counter-underflows.patch
detect atomic counter underflows

doc-where-to-find-ldd3.patch
doc: where to find LDD3

post-halloween-doc.patch
post halloween doc

fuse-maintainers-kconfig-and-makefile-changes.patch
FUSE - MAINTAINERS, Kconfig and Makefile changes

fuse-core.patch
FUSE - core

fuse-device-functions.patch
FUSE - device functions

fuse-device-functions-comments-and-documentation.patch
FUSE: comments and documentation

fuse-device-functions-cleanup.patch
FUSE: trivial cleanups

fuse-read-only-operations.patch
FUSE - read-only operations

fuse-read-write-operations.patch
FUSE - read-write operations

fuse-file-operations.patch
FUSE - file operations

fuse-mount-options.patch
FUSE - mount options

fuse-mount-options-fix.patch
fuse: fix busy inodes after unmount

fuse-mount-options-comments-and-documentation.patch
FUSE: comments and documentation

fuse-mount-options-fix-cleanup.patch
FUSE: trivial cleanups

fuse-mount-options-fix-fix.patch
FUSE: fix locking for background list

fuse-extended-attribute-operations.patch
FUSE - extended attribute operations

fuse-readpages-operation.patch
FUSE - readpages operation

fuse-nfs-export.patch
FUSE - NFS export

fuse-direct-i-o.patch
FUSE - direct I/O

fuse-transfer-readdir-data-through-device.patch
fuse: transfer readdir data through device

drivers-isdn-divert-isdn_divertc-make-5-functions-static.patch
drivers/isdn/divert/isdn_divert.c: make 5 functions static

drivers-isdn-capi-make-some-code-static.patch
drivers/isdn/capi/: make some code static

drivers-scsi-pas16c-make-code-static.patch
drivers/scsi/pas16.c: make code static

fix-pm_message_t-in-generic-code.patch
Fix pm_message_t in generic code

fix-u32-vs-pm_message_t-in-usb.patch
Fix u32 vs. pm_message_t in USB

more-pm_message_t-fixes.patch
more pm_message_t fixes

fix-u32-vs-pm_message_t-confusion-in-oss.patch
Fix u32 vs. pm_message_t confusion in OSS

fix-u32-vs-pm_message_t-confusion-in-pcmcia.patch
Fix u32 vs. pm_message_t confusion in PCMCIA

fix-u32-vs-pm_message_t-confusion-in-framebuffers.patch
Fix u32 vs. pm_message_t confusion in framebuffers

fix-u32-vs-pm_message_t-confusion-in-mmc.patch
Fix u32 vs. pm_message_t confusion in MMC

fix-u32-vs-pm_message_t-confusion-in-serials.patch
Fix u32 vs. pm_message_t confusion in serials

fix-u32-vs-pm_message_t-in-macintosh.patch
Fix u32 vs. pm_message_t in macintosh

fix-u32-vs-pm_message_t-confusion-in-agp.patch
Fix u32 vs. pm_message_t confusion in AGP

cyrix-eliminate-bad-section-references.patch
cyrix: eliminate bad section references

drivers-media-video-tvaudioc-make-some-variables-static.patch
drivers/media/video/tvaudio.c: make some variables static

drivers-isdn-sc-possible-cleanups.patch
drivers/isdn/sc/: possible cleanups

drivers-isdn-pcbit-possible-cleanups.patch
drivers/isdn/pcbit/: possible cleanups

drivers-isdn-i4l-possible-cleanups.patch
drivers/isdn/i4l/: possible cleanups

unexport-mca_find_device_by_slot.patch
unexport mca_find_device_by_slot

drivers-isdn-hardware-avm-misc-cleanups.patch
drivers/isdn/hardware/avm/: misc cleanups

drivers-isdn-act2000-capic-if-0-an-unused-function.patch
drivers/isdn/act2000/capi.c: #if 0 an unused function

tpm-fix-gcc-printk-warnings.patch
tpm: fix gcc printk warnings

x86-64-add-memcpy-memset-prototypes.patch
x86-64: add memcpy/memset prototypes

au1100fb-convert-to-c99-inits.patch
au1100fb: convert to C99 inits.

reiserfs-use-null-instead-of-0.patch
reiserfs: use NULL instead of 0

comments-on-locking-of-task-comm.patch
comments on locking of task->comm

riottyc-cleanups-and-warning-fix.patch
riotty.c cleanups and warning fix

fixup-a-comment-still-refering-to-verify_area.patch
fix up a comment still refering to verify_area

char-ds1620-use-msleep-instead-of-schedule_timeout.patch
char/ds1620: use msleep() instead of schedule_timeout()

char-tty_io-replace-schedule_timeout-with-msleep_interruptible.patch
char/tty_io: replace schedule_timeout() with msleep_interruptible()

kernel-timer-fix-msleep_interruptible-comment.patch
kernel/timer: fix msleep_interruptible() comment

ixj-compile-warning-cleanup.patch
ixj* - compile warning cleanup

spelling-cleanups-in-shrinker-code.patch
Spelling cleanups in shrinker code

init-do_mounts_initrdc-fix-sparse-warning.patch
init/do_mounts_initrd.c: fix sparse warning

arch-i386-kernel-trapsc-fix-sparse-warnings.patch
arch/i386/kernel/traps.c: fix sparse warnings

arch-i386-kernel-apmc-fix-sparse-warnings.patch
arch/i386/kernel/apm.c: fix sparse warnings

arch-i386-mm-faultc-fix-sparse-warnings.patch
arch/i386/mm/fault.c: fix sparse warnings

arch-i386-crypto-aesc-fix-sparse-warnings.patch
arch/i386/crypto/aes.c: fix sparse warnings

codingstyle-trivial-whitespace-fixups.patch
CodingStyle: trivial whitespace fixups

small-partitions-msdos-cleanups.patch
small partitions/msdos cleanups

remove-redundant-null-check-before-before-kfree-in.patch
remove redundant NULL check before before kfree() in kernel/sysctl.c

update-ross-biro-bouncing-email-address.patch
update Ross Biro bouncing email address

get-rid-of-redundant-null-checks-before-kfree-in-arch-i386.patch
get rid of redundant NULL checks before kfree() in arch/i386/

remove-redundant-null-checks-before-kfree-in-sound-and.patch
remove redundant NULL checks before kfree() in sound/ and avoid casting pointers about to be kfree()'ed

x86-geode-support-fixes.patch
x86: geode support fixes

drivers-scsi-initioc-cleanups.patch
drivers/scsi/initio.c: cleanups

dont-do-pointless-null-checks-and-casts-before-kfree.patch
selinux: kfree cleanup

drivers-char-isicomc-section-fixes.patch
drivers/char/isicom.c: section fixes

sound-oss-cleanups.patch
sound/oss/: cleanups

sound-oss-rme96xxc-remove-kernel-22-ifs.patch
sound/oss/rme96xx.c: remove kernel 2.2 #if's

drivers-char-mwave-tp3780ic-remove-kernel-22-ifs.patch
drivers/char/mwave/tp3780i.c: remove kernel 2.2 #if's

drivers-net-skfp-cleanups.patch
drivers/net/skfp/: cleanups

net-atm-resourcesc-remove-__free_atm_dev.patch
Subject: [2.6 patch] net/atm/resources.c: remove __free_atm_dev

mm-mmapnommuc-several-unexports.patch
mm/{mmap,nommu}.c: several unexports

unexport-hugetlb_total_pages.patch
unexport hugetlb_total_pages

unexport-clear_page_dirty_for_io.patch
unexport clear_page_dirty_for_io

mm-filemapc-make-sync_page_range_nolock-static.patch
mm/filemap.c: make sync_page_range_nolock static

mm-filemapc-make-generic_file_direct_io-static.patch
mm/filemap.c: make generic_file_direct_IO static

remove-exports-for-oem-modules.patch
remove exports for oem modules

mm-page_allocc-unexport-nr_swap_pages.patch
unexport nr_swap_pages

unexport-console_unblank.patch
unexport console_unblank

mm-swapc-unexport-vm_acct_memory.patch
mm/swap.c: unexport vm_acct_memory

mm-swapfilec-unexport-total_swap_pages.patch
mm/swapfile.c: unexport total_swap_pages

mm-swap_statec-unexport-swapper_space.patch
mm/swap_state.c: unexport swapper_space

unexport-slab_reclaim_pages.patch
unexport slab_reclaim_pages




2005-03-25 09:40:36

by Chuck Ebbert

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

On Fri, 25 Mar 2005 at 00:21:54 -0800, Andrew Morton wrote:

> Latest versions of sudsystem trees

Is that some kind of beer dispenser?

--
Chuck
http://www.counterfeitmini.org

2005-03-25 10:49:43

by Brice Goglin

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-mm3
# Fri Mar 25 10:56:02 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION="=LoulousMobile"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda4"

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_AOE_PARTITIONS=16

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_ISCSI_IF is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# SuperIO subsystem support
#
# CONFIG_SC_SUPERIO is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=m

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# Caches
#
# CONFIG_FSCACHE is not set
CONFIG_FUSE_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y


Attachments:
config (37.40 kB)

2005-03-25 11:29:45

by Rafael J. Wysocki

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3: box hangs solid on resume from disk while resuming device drivers

Hi,

On Friday, 25 of March 2005 09:21, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
>
> - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.

First, rmmod works again (thanks ;-)).

> - Again, we'd like people who have had recent DRM and USB resume problems to
> test and report, please.

My box is still hanged solid on resume (swsusp) by the drivers:

ohci_hcd
ehci_hcd
yenta_socket

possibly others, too. To avoid this, I had to revert the following patch from
the Len's tree:

diff -Naru a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
--- a/drivers/acpi/pci_link.c 2005-03-24 04:57:27 -08:00
+++ b/drivers/acpi/pci_link.c 2005-03-24 04:57:27 -08:00
@@ -72,10 +72,12 @@
u8 active; /* Current IRQ */
u8 edge_level; /* All IRQs */
u8 active_high_low; /* All IRQs */
- u8 initialized;
u8 resource_type;
u8 possible_count;
u8 possible[ACPI_PCI_LINK_MAX_POSSIBLE];
+ u8 initialized:1;
+ u8 suspend_resume:1;
+ u8 reserved:6;
};

struct acpi_pci_link {
@@ -530,6 +532,10 @@

ACPI_FUNCTION_TRACE("acpi_pci_link_allocate");

+ if (link->irq.suspend_resume) {
+ acpi_pci_link_set(link, link->irq.active);
+ link->irq.suspend_resume = 0;
+ }
if (link->irq.initialized)
return_VALUE(0);

@@ -713,38 +719,24 @@
return_VALUE(result);
}

-
-static int
-acpi_pci_link_resume (
- struct acpi_pci_link *link)
-{
- ACPI_FUNCTION_TRACE("acpi_pci_link_resume");
-
- if (link->irq.active && link->irq.initialized)
- return_VALUE(acpi_pci_link_set(link, link->irq.active));
- else
- return_VALUE(0);
-}
-
-
static int
-irqrouter_resume(
- struct sys_device *dev)
+irqrouter_suspend(
+ struct sys_device *dev,
+ u32 state)
{
struct list_head *node = NULL;
struct acpi_pci_link *link = NULL;

- ACPI_FUNCTION_TRACE("irqrouter_resume");
+ ACPI_FUNCTION_TRACE("irqrouter_suspend");

list_for_each(node, &acpi_link.entries) {
-
link = list_entry(node, struct acpi_pci_link, node);
if (!link) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
continue;
}
-
- acpi_pci_link_resume(link);
+ if (link->irq.active && link->irq.initialized)
+ link->irq.suspend_resume = 1;
}
return_VALUE(0);
}
@@ -856,7 +848,7 @@

static struct sysdev_class irqrouter_sysdev_class = {
set_kset_name("irqrouter"),
- .resume = irqrouter_resume,
+ .suspend = irqrouter_suspend,
};


# This is a BitKeeper generated diff -Nru style patch.
#
# ChangeSet
# 2005/03/18 16:30:29-05:00 [email protected]
# [ACPI] S3 Suspend to RAM: interrupt resume fix
#
# Delete PCI Interrupt Link Device .resume method --
# it is the device driver's job to request interrupts,
# not the Link's job to remember what the devices want.
#
# This addresses the issue of attempting to run
# the ACPI interpreter too early in resume, when
# interrupts are still disabled.
#
# http://bugzilla.kernel.org/show_bug.cgi?id=3469
#
# Signed-off-by: David Shaohua Li <[email protected]>
# Signed-off-by: Len Brown <[email protected]>
#
# drivers/acpi/pci_link.c
# 2005/03/02 22:23:50-05:00 [email protected] +14 -22
# Delete PCI Interrupt Link .resume method
#

Greets,
Rafael


--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"

2005-03-25 17:03:25

by Borislav Petkov

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

Hi Andrew,

mm3 still not booting on my machine. Boot option 'nmi_watchdog=2' (my cpu is a
dual core pentium 4 HT, 2.60 GHz) gets me a bit further in the boot process
but it blocks there too.

[output retyped from screen]:
kernel: [ 4.109241] PM: Checking swsusp image.
kernel: [ 4.109244] PM: Resume from disk failed.
kernel: [ 4.112220] VFS: Mounted root (ext2 filesystem) readonly.
kernel: [ 4.112465] Freeing unused kernel memory: 188k freed
kernel: [ 4.142002] logips2pp: Detected unknown logitech mouse model 1
kernel: [ 4.274620] input: PS/2 Logitech Mouse on isa0060/serio1
<--- [point of previous blocks without boot option 'nmi_watchdog=2']--->
INIT: version 2.86 booting
Mounting a tmpfs over /dev... done.
Creating initial device nodes... done.
Setting parameters of disc: (none).
Activating swap.
kernel: [ 10.712648] Adding 976744k swap on /dev/hda2. Priority:-1 extents:1
Checking root file system...
fsck 1.36 (05-Feb-2005)
/: clean, 127290/1831424 files, 898566/3662056 blocks
[EOF]

Regards,
Boris.

2005-03-25 18:17:27

by Barry K. Nathan

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

On Fri, Mar 25, 2005 at 12:21:54AM -0800, Andrew Morton wrote:
> More fixlets derived from the Coverity tool (does this thing have a name?)

AFAICT the name of the tool is "Coverity Prevent". (But I'm not
absolutely 100% sure.)

-Barry K. Nathan <[email protected]>

2005-03-25 19:50:49

by Steven Cole

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

I'm having trouble reading from the cd-rom with 2.6.12-rc1-mm3.

Kernel 2.6.12-rc1 behaves normally:

[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda1 ext3 304M 96M 193M 34% /
/dev/hda9 reiserfs 8.3G 7.2G 1.1G 88% /home
/dev/hda8 ext3 464M 8.1M 432M 2% /tmp
/dev/hda6 ext3 7.4G 1.5G 5.5G 22% /usr
/dev/hda7 ext3 1.9G 96M 1.7G 6% /var
/dev/hdc iso9660 38M 38M 0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 37859
-rw-r--r-- 1 501 501 38673949 Mar 25 07:41 linux-2429tar.gz
-rw-r--r-- 1 501 501 92317 Mar 25 07:43 patch-2430-rc1.bz2
[root@spc1 steven]# uname -r
2.6.12-rc1-GX110

Snipped from dmesg:

[ 51.440018] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.585093] PCI: Found IRQ 5 for device 0000:01:0c.0
[ 232.333180] ISO 9660 Extensions: IEEE_P1282



Kernel 2.6.12-rc1-mm3 does not: (same CD left in device)

[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda1 ext3 304M 96M 193M 34% /
/dev/hda9 reiserfs 8.3G 7.2G 1.1G 88% /home
/dev/hda8 ext3 464M 8.1M 432M 2% /tmp
/dev/hda6 ext3 7.4G 1.5G 5.5G 22% /usr
/dev/hda7 ext3 1.9G 96M 1.7G 6% /var
/dev/hdc iso9660 38M 38M 0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 0
[root@spc1 steven]# uname -r
2.6.12-rc1-mm3-GX110

Snipped from dmesg:

[ 49.198779] EXT3-fs: mounted filesystem with ordered data mode.
[ 56.310394] PCI: Found IRQ 5 for device 0000:01:0c.0
[ 222.804956] rock: directory entry would overflow storage
[ 222.804978] rock: sig=0x5245, size=8, remaining=0
[ 235.551953] rock: directory entry would overflow storage
[ 235.551969] rock: sig=0x5850, size=36, remaining=34
[ 235.551976] rock: directory entry would overflow storage
[ 235.551981] rock: sig=0x5850, size=36, remaining=34

Sorry, I don't have the time to do further troubleshooting, but I
hope this is enough information. The .config for this machine was
posted earlier in another thread here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111167720523853&w=2

Steven

2005-03-25 20:17:40

by Steven Cole

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

Steven Cole wrote:
> I'm having trouble reading from the cd-rom with 2.6.12-rc1-mm3.
>
> Kernel 2.6.12-rc1 behaves normally:
>
> [root@spc1 steven]# mount /dev/hdc /mnt/cdrom
> mount: block device /dev/hdc is write-protected, mounting read-only
> [root@spc1 steven]# df -T
> Filesystem Type Size Used Avail Use% Mounted on
> /dev/hda1 ext3 304M 96M 193M 34% /
> /dev/hda9 reiserfs 8.3G 7.2G 1.1G 88% /home
> /dev/hda8 ext3 464M 8.1M 432M 2% /tmp
> /dev/hda6 ext3 7.4G 1.5G 5.5G 22% /usr
> /dev/hda7 ext3 1.9G 96M 1.7G 6% /var
> /dev/hdc iso9660 38M 38M 0 100% /mnt/cdrom
> [root@spc1 steven]# ls -l /mnt/cdrom
> total 37859
> -rw-r--r-- 1 501 501 38673949 Mar 25 07:41 linux-2429tar.gz
> -rw-r--r-- 1 501 501 92317 Mar 25 07:43 patch-2430-rc1.bz2
> [root@spc1 steven]# uname -r
> 2.6.12-rc1-GX110
>
> Snipped from dmesg:
>
> [ 51.440018] EXT3-fs: mounted filesystem with ordered data mode.
> [ 58.585093] PCI: Found IRQ 5 for device 0000:01:0c.0
> [ 232.333180] ISO 9660 Extensions: IEEE_P1282
>
>
>
> Kernel 2.6.12-rc1-mm3 does not: (same CD left in device)
>
> [root@spc1 steven]# mount /dev/hdc /mnt/cdrom
> mount: block device /dev/hdc is write-protected, mounting read-only
> [root@spc1 steven]# df -T
> Filesystem Type Size Used Avail Use% Mounted on
> /dev/hda1 ext3 304M 96M 193M 34% /
> /dev/hda9 reiserfs 8.3G 7.2G 1.1G 88% /home
> /dev/hda8 ext3 464M 8.1M 432M 2% /tmp
> /dev/hda6 ext3 7.4G 1.5G 5.5G 22% /usr
> /dev/hda7 ext3 1.9G 96M 1.7G 6% /var
> /dev/hdc iso9660 38M 38M 0 100% /mnt/cdrom
> [root@spc1 steven]# ls -l /mnt/cdrom
> total 0
> [root@spc1 steven]# uname -r
> 2.6.12-rc1-mm3-GX110
>
> Snipped from dmesg:
>
> [ 49.198779] EXT3-fs: mounted filesystem with ordered data mode.
> [ 56.310394] PCI: Found IRQ 5 for device 0000:01:0c.0
> [ 222.804956] rock: directory entry would overflow storage
> [ 222.804978] rock: sig=0x5245, size=8, remaining=0
> [ 235.551953] rock: directory entry would overflow storage
> [ 235.551969] rock: sig=0x5850, size=36, remaining=34
> [ 235.551976] rock: directory entry would overflow storage
> [ 235.551981] rock: sig=0x5850, size=36, remaining=34
>
> Sorry, I don't have the time to do further troubleshooting, but I
> hope this is enough information. The .config for this machine was
> posted earlier in another thread here:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=111167720523853&w=2
>
> Steven

I found a few more minutes to test two more kernels. The problem
first occured with 2.6.12-rc1-mm2:

2.6.12-rc1 reads the cd-rom OK as reported earlier
2.6.12-rc1-mm1 also reads the cd-rom OK
2.6.12-rc1-mm2 broken same as -mm3 described as above
2.6.12-rc1-mm3 broken as reported earlier

Steven

2005-03-25 20:24:53

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

Steven Cole <[email protected]> wrote:
>
> >
> > [ 49.198779] EXT3-fs: mounted filesystem with ordered data mode.
> > [ 56.310394] PCI: Found IRQ 5 for device 0000:01:0c.0
> > [ 222.804956] rock: directory entry would overflow storage
> > [ 222.804978] rock: sig=0x5245, size=8, remaining=0
> > [ 235.551953] rock: directory entry would overflow storage
> > [ 235.551969] rock: sig=0x5850, size=36, remaining=34
> > [ 235.551976] rock: directory entry would overflow storage
> > [ 235.551981] rock: sig=0x5850, size=36, remaining=34
> >
> > Sorry, I don't have the time to do further troubleshooting, but I
> > hope this is enough information. The .config for this machine was
> > posted earlier in another thread here:
> > http://marc.theaimsgroup.com/?l=linux-kernel&m=111167720523853&w=2
> >
> > Steven
>
> I found a few more minutes to test two more kernels. The problem
> first occured with 2.6.12-rc1-mm2:
>
> 2.6.12-rc1 reads the cd-rom OK as reported earlier
> 2.6.12-rc1-mm1 also reads the cd-rom OK
> 2.6.12-rc1-mm2 broken same as -mm3 described as above
> 2.6.12-rc1-mm3 broken as reported earlier

Are you really really sure about that? -mm3 included both the bk-ide-dev
tree and the isofs changes. 2.6.12-rc1-mm2 had neither.

2005-03-25 21:23:42

by Steven Cole

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

Andrew Morton wrote:
> Steven Cole <[email protected]> wrote:
>
>> > [ 49.198779] EXT3-fs: mounted filesystem with ordered data mode.
>> > [ 56.310394] PCI: Found IRQ 5 for device 0000:01:0c.0
>> > [ 222.804956] rock: directory entry would overflow storage
>> > [ 222.804978] rock: sig=0x5245, size=8, remaining=0
>> > [ 235.551953] rock: directory entry would overflow storage
>> > [ 235.551969] rock: sig=0x5850, size=36, remaining=34
>> > [ 235.551976] rock: directory entry would overflow storage
>> > [ 235.551981] rock: sig=0x5850, size=36, remaining=34
>> >
>> > Sorry, I don't have the time to do further troubleshooting, but I
>> > hope this is enough information. The .config for this machine was
>> > posted earlier in another thread here:
>> > http://marc.theaimsgroup.com/?l=linux-kernel&m=111167720523853&w=2
>> >
>> > Steven
>>
>> I found a few more minutes to test two more kernels. The problem
>> first occured with 2.6.12-rc1-mm2:
>>
>> 2.6.12-rc1 reads the cd-rom OK as reported earlier
>> 2.6.12-rc1-mm1 also reads the cd-rom OK
>> 2.6.12-rc1-mm2 broken same as -mm3 described as above
>> 2.6.12-rc1-mm3 broken as reported earlier
>
>
> Are you really really sure about that? -mm3 included both the bk-ide-dev
> tree and the isofs changes. 2.6.12-rc1-mm2 had neither.
>

Just to be really really sure, I repeated the tests. I even checked
that the image/label combination in /etc/lilo.conf was what I intended,
but the uname -r should show what's what.

Same results, -mm2 broken, and -mm1 reads the disk. I even tried
other CD's just to make sure I didn't have something weird. Same results.

[root@spc1 steven]# uname -r
2.6.12-rc1-mm2-GX110
[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda1 ext3 304M 96M 193M 34% /
/dev/hda9 reiserfs 8.3G 7.5G 818M 91% /home
/dev/hda8 ext3 464M 8.1M 432M 2% /tmp
/dev/hda6 ext3 7.4G 1.5G 5.5G 22% /usr
/dev/hda7 ext3 1.9G 96M 1.7G 6% /var
/dev/hdc iso9660 2.9M 2.9M 0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 0
[root@spc1 steven]# dmesg | tail
[ 51.205871] EXT3 FS on hda6, internal journal
[ 51.205880] EXT3-fs: mounted filesystem with ordered data mode.
[ 51.234132] kjournald starting. Commit interval 5 seconds
[ 51.234544] EXT3 FS on hda7, internal journal
[ 51.234553] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.357329] PCI: Found IRQ 5 for device 0000:01:0c.0
[ 146.301026] rock: directory entry would overflow storage
[ 146.301044] rock: sig=0x5245, size=8, remaining=0
[ 158.388397] rock: directory entry would overflow storage
[ 158.388415] rock: sig=0x5850, size=36, remaining=34
[root@spc1 steven]#

Machine rebooted here.

[root@spc1 steven]# uname -r
2.6.12-rc1-mm1-GX110
[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda1 ext3 304M 96M 193M 34% /
/dev/hda9 reiserfs 8.3G 7.5G 818M 91% /home
/dev/hda8 ext3 464M 8.1M 432M 2% /tmp
/dev/hda6 ext3 7.4G 1.5G 5.5G 22% /usr
/dev/hda7 ext3 1.9G 96M 1.7G 6% /var
/dev/hdc iso9660 2.9M 2.9M 0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 2578
-rw-rw-rw- 1 501 501 2639360 Aug 7 2003 snmp-opc server 30.msi
[root@spc1 steven]# dmesg | tail
[ 50.267382] EXT3 FS on hda8, internal journal
[ 50.267395] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.301423] kjournald starting. Commit interval 5 seconds
[ 50.301763] EXT3 FS on hda6, internal journal
[ 50.301774] EXT3-fs: mounted filesystem with ordered data mode.
[ 50.330087] kjournald starting. Commit interval 5 seconds
[ 50.330503] EXT3 FS on hda7, internal journal
[ 50.330516] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.453061] PCI: Found IRQ 5 for device 0000:01:0c.0
[ 187.450836] ISO 9660 Extensions: IEEE_P1282
[root@spc1 steven]#

Steven

2005-03-25 21:49:04

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

Steven Cole <[email protected]> wrote:
>
> >>
> >> I found a few more minutes to test two more kernels. The problem
> >> first occured with 2.6.12-rc1-mm2:
> >>
> >> 2.6.12-rc1 reads the cd-rom OK as reported earlier
> >> 2.6.12-rc1-mm1 also reads the cd-rom OK
> >> 2.6.12-rc1-mm2 broken same as -mm3 described as above
> >> 2.6.12-rc1-mm3 broken as reported earlier
> >
> >
> > Are you really really sure about that? -mm3 included both the bk-ide-dev
> > tree and the isofs changes. 2.6.12-rc1-mm2 had neither.
> >
>
> Just to be really really sure, I repeated the tests. I even checked
> that the image/label combination in /etc/lilo.conf was what I intended,
> but the uname -r should show what's what.
>
> Same results, -mm2 broken, and -mm1 reads the disk. I even tried
> other CD's just to make sure I didn't have something weird. Same results.

OK, thanks.

It would be interesting to copy a CD to hard disk (under -mm1) and see if
it works OK with the loopback driver.

Also, boot into -mm2 and do a `cmp' of the cdrom with the image which is on
hard-disk.

This should help us work out whether it's isofs, the driver, the VFS or
whatever.

2005-03-25 21:54:03

by Jason Munro

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

On 3:22:52 pm 03/25/05 Steven Cole <[email protected]> wrote:
> Same results, -mm2 broken, and -mm1 reads the disk. I even tried
> other CD's just to make sure I didn't have something weird. Same
> results.

> [root@spc1 steven]# dmesg | tail
> [ 51.205871] EXT3 FS on hda6, internal journal
> [ 51.205880] EXT3-fs: mounted filesystem with ordered data mode.
> [ 51.234132] kjournald starting. Commit interval 5 seconds
> [ 51.234544] EXT3 FS on hda7, internal journal
> [ 51.234553] EXT3-fs: mounted filesystem with ordered data mode.
> [ 58.357329] PCI: Found IRQ 5 for device 0000:01:0c.0
> [ 146.301026] rock: directory entry would overflow storage
> [ 146.301044] rock: sig=0x5245, size=8, remaining=0
> [ 158.388397] rock: directory entry would overflow storage
> [ 158.388415] rock: sig=0x5850, size=36, remaining=34
> [root@spc1 steven]#


Same results with mm3 here, though mm2 will not boot on my machine so I'm
not sure about that. 2.6.12-rc1 works fine, rc1-mm3 successfully mounts the
cdrom device but shows no contents. Releveant dmsesg output:

rock: directory entry would overflow storage
rock: sig=0x4543, size=28, remaining=0
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=27
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=27
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=27
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=26
rock: directory entry would overflow storage
rock: sig=0x5850, size=36, remaining=27

The machine is a Toshiba P35-S609 laptop the cdrom device is:
MATSHITADVD-RAM UJ-820S, ATAPI CD/DVD-ROM drive

Kernel config is attached.


\__ Jason Munro
\__ [email protected]
\__ http://hastymail.sourceforge.net/


Attachments:
config (37.42 kB)

2005-03-25 22:09:36

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)


(Please dont' edit the cc line. Just do reply-to-all)

"Jason Munro" <[email protected]> wrote:
>
> > [ 146.301026] rock: directory entry would overflow storage
> > [ 146.301044] rock: sig=0x5245, size=8, remaining=0
> > [ 158.388397] rock: directory entry would overflow storage
> > [ 158.388415] rock: sig=0x5850, size=36, remaining=34
> > [root@spc1 steven]#
>
>
> Same results with mm3 here, though mm2 will not boot on my machine so I'm
> not sure about that. 2.6.12-rc1 works fine, rc1-mm3 successfully mounts the
> cdrom device but shows no contents. Releveant dmsesg output:
>
> rock: directory entry would overflow storage
> rock: sig=0x4543, size=28, remaining=0
> rock: directory entry would overflow storage

Seems that I am unable to read. It's the new rock-ridge bounds checking.

It worked for me. Is someone able to get an image of a failing filesystem
into my hands?

2005-03-25 22:24:50

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

Andrew Morton <[email protected]> wrote:
>
> It's the new rock-ridge bounds checking.

Try this, please?

diff -puN fs/isofs/rock.c~rock-handle-directory-overflows-fix fs/isofs/rock.c
--- 25/fs/isofs/rock.c~rock-handle-directory-overflows-fix Fri Mar 25 14:21:32 2005
+++ 25-akpm/fs/isofs/rock.c Fri Mar 25 14:22:01 2005
@@ -218,12 +218,12 @@ repeat:
if (rr->len < 3)
goto out; /* Something got screwed up here */
sig = isonum_721(rs.chr);
+ if (rock_check_overflow(&rs, sig))
+ goto eio;
rs.chr += rr->len;
rs.len -= rr->len;
if (rs.len < 0)
goto eio; /* corrupted isofs */
- if (rock_check_overflow(&rs, sig))
- goto eio;

switch (sig) {
case SIG('R', 'R'):
@@ -316,12 +316,12 @@ repeat:
if (rr->len < 3)
goto out; /* Something got screwed up here */
sig = isonum_721(rs.chr);
+ if (rock_check_overflow(&rs, sig))
+ goto eio;
rs.chr += rr->len;
rs.len -= rr->len;
if (rs.len < 0)
goto eio; /* corrupted isofs */
- if (rock_check_overflow(&rs, sig))
- goto eio;

switch (sig) {
#ifndef CONFIG_ZISOFS /* No flag for SF or ZF */
@@ -694,12 +694,12 @@ repeat:
if (rr->len < 3)
goto out; /* Something got screwed up here */
sig = isonum_721(rs.chr);
+ if (rock_check_overflow(&rs, sig))
+ goto out;
rs.chr += rr->len;
rs.len -= rr->len;
if (rs.len < 0)
goto out; /* corrupted isofs */
- if (rock_check_overflow(&rs, sig))
- goto out;

switch (sig) {
case SIG('R', 'R'):
_

2005-03-25 22:28:41

by Jason Munro

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

On 4:06:54 pm 03/25/05 Andrew Morton <[email protected]> wrote:
>
> (Please dont' edit the cc line. Just do reply-to-all)

Oops, reply-to-all it is.

> "Jason Munro" <[email protected]> wrote:
> >
> > > [ 146.301026] rock: directory entry would overflow storage
> > > [ 146.301044] rock: sig=0x5245, size=8, remaining=0
> > > [ 158.388397] rock: directory entry would overflow storage
> > > [ 158.388415] rock: sig=0x5850, size=36, remaining=34
> > > [root@spc1 steven]#
> >
> >
> > Same results with mm3 here, though mm2 will not boot on my machine
> > so I'm not sure about that. 2.6.12-rc1 works fine, rc1-mm3
> > successfully mounts the cdrom device but shows no contents.
> > Releveant dmsesg output:
> > rock: directory entry would overflow storage
> > rock: sig=0x4543, size=28, remaining=0
> > rock: directory entry would overflow storage
>
> Seems that I am unable to read. It's the new rock-ridge bounds
> checking.
>
> It worked for me. Is someone able to get an image of a failing
> filesystem into my hands?

I can reproduce it with the following:

mkdir temp
touch temp/file1 temp/file2 temp/file3
mkisofs -R -l temp > test.iso
mount -o loop /mnt/loop


\__ Jason Munro
\__ [email protected]
\__ http://hastymail.sourceforge.net/

2005-03-25 22:31:47

by Chris Wright

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

* Andrew Morton ([email protected]) wrote:
>
> (Please dont' edit the cc line. Just do reply-to-all)
>
> "Jason Munro" <[email protected]> wrote:
> >
> > > [ 146.301026] rock: directory entry would overflow storage
> > > [ 146.301044] rock: sig=0x5245, size=8, remaining=0
> > > [ 158.388397] rock: directory entry would overflow storage
> > > [ 158.388415] rock: sig=0x5850, size=36, remaining=34
> > > [root@spc1 steven]#
> >
> >
> > Same results with mm3 here, though mm2 will not boot on my machine so I'm
> > not sure about that. 2.6.12-rc1 works fine, rc1-mm3 successfully mounts the
> > cdrom device but shows no contents. Releveant dmsesg output:
> >
> > rock: directory entry would overflow storage
> > rock: sig=0x4543, size=28, remaining=0
> > rock: directory entry would overflow storage
>
> Seems that I am unable to read. It's the new rock-ridge bounds checking.
>
> It worked for me. Is someone able to get an image of a failing filesystem
> into my hands?

I'm interested as well. It should only be the last in the series.
Does reverting it allow the CD to work? (I'm trying to make sure the
other overflow check in the series isn't breaking things, I doubt is,
but...).

ftp.kernel.org:/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/broken-out/rock-handle-directory-overflows.patch

thanks,
-chris

2005-03-25 22:32:51

by Jason Munro

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

On 4:27:49 pm 03/25/05 "Jason Munro" <[email protected]> wrote:
> On 4:06:54 pm 03/25/05 Andrew Morton <[email protected]> wrote:
> >
> > (Please dont' edit the cc line. Just do reply-to-all)
>
> Oops, reply-to-all it is.
>
> > "Jason Munro" <[email protected]> wrote:
> > >
> > > > [ 146.301026] rock: directory entry would overflow storage
> > > > [ 146.301044] rock: sig=0x5245, size=8, remaining=0
> > > > [ 158.388397] rock: directory entry would overflow storage
> > > > [ 158.388415] rock: sig=0x5850, size=36, remaining=34
> > > > [root@spc1 steven]#
> > >
> > >
> > > Same results with mm3 here, though mm2 will not boot on my
> > > machine so I'm not sure about that. 2.6.12-rc1 works fine,
> > > rc1-mm3 successfully mounts the cdrom device but shows no
> > > contents. Releveant dmsesg output:
> > > rock: directory entry would overflow storage
> > > rock: sig=0x4543, size=28, remaining=0
> > > rock: directory entry would overflow storage
> >
> > Seems that I am unable to read. It's the new rock-ridge bounds
> > checking.
> >
> > It worked for me. Is someone able to get an image of a failing
> > filesystem into my hands?
>
> I can reproduce it with the following:
>
> mkdir temp
> touch temp/file1 temp/file2 temp/file3
> mkisofs -R -l temp > test.iso
> mount -o loop /mnt/loop

Of course that should be: mount -o loop test.iso /mnt/loop :)

\__ Jason Munro
\__ [email protected]
\__ http://hastymail.sourceforge.net/

2005-03-25 22:39:56

by Steven Cole

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

Andrew Morton wrote:
> Steven Cole <[email protected]> wrote:
>
>>>>I found a few more minutes to test two more kernels. The problem
>>>>first occured with 2.6.12-rc1-mm2:
>>>>
>>>>2.6.12-rc1 reads the cd-rom OK as reported earlier
>>>>2.6.12-rc1-mm1 also reads the cd-rom OK
>>>>2.6.12-rc1-mm2 broken same as -mm3 described as above
>>>>2.6.12-rc1-mm3 broken as reported earlier
>>>
>>>
>>>Are you really really sure about that? -mm3 included both the bk-ide-dev
>>>tree and the isofs changes. 2.6.12-rc1-mm2 had neither.
>>>
>>
>>Just to be really really sure, I repeated the tests. I even checked
>>that the image/label combination in /etc/lilo.conf was what I intended,
>>but the uname -r should show what's what.
>>
>>Same results, -mm2 broken, and -mm1 reads the disk. I even tried
>>other CD's just to make sure I didn't have something weird. Same results.
>
>
> OK, thanks.
>
> It would be interesting to copy a CD to hard disk (under -mm1) and see if
> it works OK with the loopback driver.
>
> Also, boot into -mm2 and do a `cmp' of the cdrom with the image which is on
> hard-disk.
>
> This should help us work out whether it's isofs, the driver, the VFS or
> whatever.
> -

It seems that I've run out of time here today. If this is still an issue
after the weekend, I'll do the above tests.

Until then, Happy Easter.

Steven

2005-03-25 22:48:01

by Steven Cole

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

Andrew Morton wrote:
> Andrew Morton <[email protected]> wrote:
>
>>It's the new rock-ridge bounds checking.
>
>
> Try this, please?

OK, you caught me just as I was headed out the door. ;)

The patch fixed it for me. Wheee.

[root@spc1 steven]# uname -r
2.6.12-rc1-mm3-GX110
[root@spc1 steven]# mount /dev/hdc /mnt/cdrom
mount: block device /dev/hdc is write-protected, mounting read-only
[root@spc1 steven]# df -T
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda1 ext3 304M 96M 193M 34% /
/dev/hda9 reiserfs 8.3G 7.9G 335M 97% /home
/dev/hda8 ext3 464M 8.1M 432M 2% /tmp
/dev/hda6 ext3 7.4G 1.5G 5.5G 22% /usr
/dev/hda7 ext3 1.9G 97M 1.7G 6% /var
/dev/hdc iso9660 2.9M 2.9M 0 100% /mnt/cdrom
[root@spc1 steven]# ls -l /mnt/cdrom
total 2578
-rw-rw-rw- 1 501 501 2639360 Aug 7 2003 snmp-opc server 30.msi
[root@spc1 steven]# dmesg | tail
[ 49.932278] EXT3 FS on hda8, internal journal
[ 49.932292] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.966250] kjournald starting. Commit interval 5 seconds
[ 49.966659] EXT3 FS on hda6, internal journal
[ 49.966669] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.994929] kjournald starting. Commit interval 5 seconds
[ 49.995334] EXT3 FS on hda7, internal journal
[ 49.995345] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.117794] PCI: Found IRQ 5 for device 0000:01:0c.0
[ 123.944869] ISO 9660 Extensions: IEEE_P1282


Steven

2005-03-25 22:44:53

by Jason Munro

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

On 4:23:36 pm 03/25/05 Andrew Morton <[email protected]> wrote:
> Andrew Morton <[email protected]> wrote:
> >
> > It's the new rock-ridge bounds checking.
>
> Try this, please?
>
> diff -puN fs/isofs/rock.c~rock-handle-directory-overflows-fix
> fs/isofs/rock.c --- 25/fs/isofs/rock.c~rock-handle-directory-overflows
> -fix Fri Mar 25 14:21:32 2005
> +++ 25-akpm/fs/isofs/rock.c Fri Mar 25 14:22:01 2005
> @@ -218,12 +218,12 @@ repeat:
> if (rr->len < 3)
> goto out; /* Something got screwed up here */
> sig = isonum_721(rs.chr);
> + if (rock_check_overflow(&rs, sig))
> + goto eio;
> rs.chr += rr->len;
> rs.len -= rr->len;
> if (rs.len < 0)
> goto eio; /* corrupted isofs */
> - if (rock_check_overflow(&rs, sig))
> - goto eio;
>
> switch (sig) {
> case SIG('R', 'R'):
> @@ -316,12 +316,12 @@ repeat:
> if (rr->len < 3)
> goto out; /* Something got screwed up here */
> sig = isonum_721(rs.chr);
> + if (rock_check_overflow(&rs, sig))
> + goto eio;
> rs.chr += rr->len;
> rs.len -= rr->len;
> if (rs.len < 0)
> goto eio; /* corrupted isofs */
> - if (rock_check_overflow(&rs, sig))
> - goto eio;
>
> switch (sig) {
> #ifndef CONFIG_ZISOFS /* No flag for SF or ZF */
> @@ -694,12 +694,12 @@ repeat:
> if (rr->len < 3)
> goto out; /* Something got screwed up here */
> sig = isonum_721(rs.chr);
> + if (rock_check_overflow(&rs, sig))
> + goto out;
> rs.chr += rr->len;
> rs.len -= rr->len;
> if (rs.len < 0)
> goto out; /* corrupted isofs */
> - if (rock_check_overflow(&rs, sig))
> - goto out;
>
> switch (sig) {
> case SIG('R', 'R'):
> _

This fixes it here.

\__ Jason Munro
\__ [email protected]
\__ http://hastymail.sourceforge.net/

2005-03-25 22:59:35

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3 (cannot read cd-rom, 2.6.12-rc1 is OK)

"Jason Munro" <[email protected]> wrote:
>
> This fixes it here.
>

Steven Cole <[email protected]> wrote:
>
> The patch fixed it for me. Wheee.
>

OK, thanks guys. You're the best.

2005-03-26 01:44:05

by Jason Uhlenkott

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

On Fri, Mar 25, 2005 at 12:21:54AM -0800, Andrew Morton wrote:
> bk-acpi.patch

This doesn't build for SGI sn2:

arch/ia64/kernel/mca.c: In function `ia64_mca_init':
arch/ia64/kernel/mca.c:1394: error: `ACPI_INTERRUPT_CPEI' undeclared (first use in this function)
arch/ia64/kernel/mca.c:1394: error: (Each undeclared identifier is reported only once
arch/ia64/kernel/mca.c:1394: error: for each function it appears in.)
make[1]: *** [arch/ia64/kernel/mca.o] Error 1
make: *** [arch/ia64/kernel] Error 2

This is because we lost CONFIG_ACPI_BOOT -- it now depends on
CONFIG_PM, which we don't have (or want) on sn2. The following fixes
it, but I'm not sure what the original rationale was. Len?

Signed-off-by: Jason Uhlenkott <[email protected]>

Index: linux/drivers/acpi/Kconfig
===================================================================
--- linux.orig/drivers/acpi/Kconfig 2005-03-25 12:22:57.909667494 -0800
+++ linux/drivers/acpi/Kconfig 2005-03-25 16:28:35.793588269 -0800
@@ -3,7 +3,6 @@
#

menu "ACPI (Advanced Configuration and Power Interface) Support"
- depends on PM
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86

2005-03-26 01:57:20

by Brown, Len

[permalink] [raw]
Subject: Re: [ACPI] Re: 2.6.12-rc1-mm3

On Fri, 2005-03-25 at 20:43, Jason Uhlenkott wrote:
> On Fri, Mar 25, 2005 at 12:21:54AM -0800, Andrew Morton wrote:
> > bk-acpi.patch
>
> This doesn't build for SGI sn2:
>
> arch/ia64/kernel/mca.c: In function `ia64_mca_init':
> arch/ia64/kernel/mca.c:1394: error: `ACPI_INTERRUPT_CPEI' undeclared
> (first use in this function)
> arch/ia64/kernel/mca.c:1394: error: (Each undeclared identifier is
> reported only once
> arch/ia64/kernel/mca.c:1394: error: for each function it appears in.)
> make[1]: *** [arch/ia64/kernel/mca.o] Error 1
> make: *** [arch/ia64/kernel] Error 2
>
> This is because we lost CONFIG_ACPI_BOOT -- it now depends on
> CONFIG_PM, which we don't have (or want) on sn2. The following fixes
> it, but I'm not sure what the original rationale was. Len?
>
> Signed-off-by: Jason Uhlenkott <[email protected]>
>

Please send me the .config you'd like to build.
I believe that what we want to do is include CONFIG_PM.
Note also that CONFIG_ACPI_BOOT will be going away --
to be replaced simply by CONFIG_ACPI.

thanks,
-Len


2005-03-26 02:03:50

by Jason Uhlenkott

[permalink] [raw]
Subject: Re: [ACPI] Re: 2.6.12-rc1-mm3

On Fri, Mar 25, 2005 at 08:56:58PM -0500, Len Brown wrote:
> Please send me the .config you'd like to build.

arch/ia64/configs/sn2_defconfig

> I believe that what we want to do is include CONFIG_PM.

At first glance, it looks like that will enable suspend/resume
functionality (which I don't think we want on SGI sn2) for a bunch of
drivers.

2005-03-26 02:25:48

by Brown, Len

[permalink] [raw]
Subject: Re: [ACPI] Re: 2.6.12-rc1-mm3

On Fri, 2005-03-25 at 21:02, Jason Uhlenkott wrote:
> On Fri, Mar 25, 2005 at 08:56:58PM -0500, Len Brown wrote:
> > Please send me the .config you'd like to build.
>
> arch/ia64/configs/sn2_defconfig


> > I believe that what we want to do is include CONFIG_PM.
>
> At first glance, it looks like that will enable suspend/resume
> functionality (which I don't think we want on SGI sn2) for a bunch of
> drivers.

What bad things happen if you define CONFIG_PM on SN2?

Re: CONFIG_ACPI_BOOT
I've got a patch that makes it go away -- this looks like
a good reason for me to dust it off... Looks like
arch/ia64/Kconfig defines ACPI and then pulls in drivers/acpi/Kconfig,
which it should not do - it should look like i386/Kconfig...

-Len

2005-03-26 02:58:46

by Jason Uhlenkott

[permalink] [raw]
Subject: Re: [ACPI] Re: 2.6.12-rc1-mm3

On Fri, Mar 25, 2005 at 09:24:21PM -0500, Len Brown wrote:
> What bad things happen if you define CONFIG_PM on SN2?

None, other than slightly enlarging the kernel with some
suspend/resume stuff we don't care about. It's always been
unavailable for SN2 builds:

depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB

but there doesn't appear to be any particular reason for that other
than us not needing it (and in fact SN2 systems can run IA64_GENERIC
kernels with CONFIG_PM enabled without incident).

> Re: CONFIG_ACPI_BOOT
> I've got a patch that makes it go away -- this looks like
> a good reason for me to dust it off... Looks like
> arch/ia64/Kconfig defines ACPI and then pulls in drivers/acpi/Kconfig,
> which it should not do - it should look like i386/Kconfig...

Sounds good to me. Does that mean everything currently controlled by
CONFIG_ACPI_BOOT will be controlled by CONFIG_ACPI instead?

2005-03-26 03:42:37

by Jesse Barnes

[permalink] [raw]
Subject: Re: [ACPI] Re: 2.6.12-rc1-mm3

On Friday, March 25, 2005 6:57 pm, Jason Uhlenkott wrote:
> On Fri, Mar 25, 2005 at 09:24:21PM -0500, Len Brown wrote:
> > What bad things happen if you define CONFIG_PM on SN2?
>
> None, other than slightly enlarging the kernel with some
> suspend/resume stuff we don't care about. It's always been
> unavailable for SN2 builds:
>
> depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB
>
> but there doesn't appear to be any particular reason for that other
> than us not needing it (and in fact SN2 systems can run IA64_GENERIC
> kernels with CONFIG_PM enabled without incident).
>
> > Re: CONFIG_ACPI_BOOT
> > I've got a patch that makes it go away -- this looks like
> > a good reason for me to dust it off... Looks like
> > arch/ia64/Kconfig defines ACPI and then pulls in drivers/acpi/Kconfig,
> > which it should not do - it should look like i386/Kconfig...

Yeah, I noticed that too. If you've got a patch to clean it up, we should go
ahead and get it sent off to Tony.

I sent this to linux-ia64 the other day to address these issues.

Jesse


Attachments:
(No filename) (1.05 kB)
ia64-kconfig-pm-fix.patch (409.00 B)
Download all attachments

2005-03-26 04:13:00

by Brown, Len

[permalink] [raw]
Subject: Re: [ACPI] Re: 2.6.12-rc1-mm3

On Fri, 2005-03-25 at 21:57, Jason Uhlenkott wrote:
> On Fri, Mar 25, 2005 at 09:24:21PM -0500, Len Brown wrote:
> > What bad things happen if you define CONFIG_PM on SN2?
>
> None, other than slightly enlarging the kernel with some
> suspend/resume stuff we don't care about. It's always been
> unavailable for SN2 builds:
>
> depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 ||
> IA64_HP_ZX1_SWIOTLB
>
> but there doesn't appear to be any particular reason for that other
> than us not needing it (and in fact SN2 systems can run IA64_GENERIC
> kernels with CONFIG_PM enabled without incident).

good.

I realize now I didn't answer your original question.
The reason ACPI now depends on PM is that
it makes it easier for us to do a more orderly shutdown --
acpi registers as a device so it can do some stuff
upon the PM device shutdowns -- before interrupts are disabled.

I think with all the twisty turney passages
related to the suspend states, poweroff, sys-req, and now kexec,
that it is best if we can keep the code paths as
common as possible or some of them will never get the
testing needed to prevent them from getting broken.

Also, it is now common practice to include PM && ACPI together
in the x86 world. Though technically one could have
ACPI w/o PM and you'd have lost only ACPI_SLEEP, virtually
nobody seems to use/depend-on that combination.

Obviously I hadn't considered SN2 or built its config
before that 1-liner. I'll be sure to build it next time.

> > Re: CONFIG_ACPI_BOOT
> > I've got a patch that makes it go away -- this looks like
> > a good reason for me to dust it off... Looks like
> > arch/ia64/Kconfig defines ACPI and then pulls in
> drivers/acpi/Kconfig,
> > which it should not do - it should look like i386/Kconfig...
>
> Sounds good to me. Does that mean everything currently controlled by
> CONFIG_ACPI_BOOT will be controlled by CONFIG_ACPI instead?

yes. this was in -mm a while back, but got pushed onto the back
burner when more pressing things came up.

thanks,
-Len


2005-03-26 04:23:46

by Paul Blazejowski

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

Something funky going on with ACPI on nForce2? NFS is no go either.

Linux version 2.6.12-rc1-mm3 (root@blaze) (gcc version 3.3.4) #2
PREEMPT Fri Mar 25 14:30:56 EST 2005

[snip ...]

ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: nForce2 C1 Halt Disconnect fixup
Boot video device is 0000:03:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Can't get handler for 0000:00:00.1
ACPI: Can't get handler for 0000:00:00.2
ACPI: Can't get handler for 0000:00:00.3
ACPI: Can't get handler for 0000:00:00.4
ACPI: Can't get handler for 0000:00:00.5
ACPI: Can't get handler for 0000:01:0a.0
ACPI: Can't get handler for 0000:01:0b.0
ACPI: Can't get handler for 0000:01:0c.0
ACPI: Can't get handler for 0000:03:00.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: No ACPI bus support for 00:00
ACPI: No ACPI bus support for 00:01
ACPI: No ACPI bus support for 00:02
ACPI: No ACPI bus support for 00:03
ACPI: No ACPI bus support for 00:04
ACPI: No ACPI bus support for 00:05
ACPI: No ACPI bus support for 00:06
ACPI: No ACPI bus support for 00:07
ACPI: No ACPI bus support for 00:08
ACPI: No ACPI bus support for 00:09
ACPI: No ACPI bus support for 00:0a
ACPI: No ACPI bus support for 00:0b
ACPI: No ACPI bus support for 00:0c
ACPI: No ACPI bus support for 00:0d
pnp: PnP ACPI: found 14 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
pnp: 00:01: ioport range 0x1c00-0x1c3f has been reserved
pnp: 00:01: ioport range 0x2000-0x203f has been reserved
ACPI: Power Button (FF) [PWRF]
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
ACPI: No ACPI bus support for i8042
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ACPI: No ACPI bus support for serial8250
ACPI: No ACPI bus support for serio0
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: No ACPI bus support for serio1
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[snip ...]

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: No ACPI bus support for 0.0
ACPI: No ACPI bus support for 0.1
Probing IDE interface ide1...
hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: No ACPI bus support for 1.0
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level,
high) -> IRQ 18
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16)
(scsi0:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
ACPI: No ACPI bus support for 0:0:4:0
Vendor: IBM Model: DDYS-T36950N Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:6:0: Tagged Queuing enabled. Depth 32
ACPI: No ACPI bus support for 0:0:6:0
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC2] -> GSI 17 (level,
high) -> IRQ 17
Found Controller: IT8212 UDMA/ATA133 RAID Controller
FindDevices: device 0 is IDE
Channel[0] BM-DMA at 0x9800-0x9807
Channel[1] BM-DMA at 0x9808-0x980F
scsi1 : ITE RAIDExpress133
Vendor: ITE Model: IT8212F Rev: 1.45
Type: Direct-Access ANSI SCSI revision: 00
ACPI: No ACPI bus support for 1:0:0:0

[snip ...]

ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <[email protected]>
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 22 (level,
high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ACPI: No ACPI bus support for fw-host0
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level,
high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 22, io mem 0xee083000
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
ACPI: No ACPI bus support for usb1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: No ACPI bus support for 1-0:1.0
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level,
high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xee087000
ACPI: No ACPI bus support for usb2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: No ACPI bus support for 2-0:1.0
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level,
high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
ACPI: No ACPI bus support for 8a1cc7ffff0020ed
ieee1394: Host added: ID:BUS[0-00:1023] GUID[8a1cc7ffff0020ed]
ACPI: No ACPI bus support for 8a1cc7ffff0020ed-0
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 20, io mem 0xee082000
ACPI: No ACPI bus support for usb3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: No ACPI bus support for 3-0:1.0
eth1394: $Rev: 1247 $ Ben Collins <[email protected]>
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usb 1-3: new high speed USB device using ehci_hcd and address 3
ACPI: No ACPI bus support for 1-3
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ACPI: No ACPI bus support for 1-3:1.0
i2c_adapter i2c-4: nForce2 SMBus adapter at 0x1c00
i2c_adapter i2c-5: nForce2 SMBus adapter at 0x2000
eth1: no link during initialization.
usb 2-1: new low speed USB device using ohci_hcd and address 2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
ACPI: No ACPI bus support for 2-1
ACPI: No ACPI bus support for 2-1:1.0
usbcore: registered new driver hiddev

[snip ...]
RPC: failed to contact portmap (errno -512).

mount shows

mount -t nfs blazebox:/home/paul /mnt/hd
mount: blazebox:/home/paul: can't read superblock

And the rpcinfo -p on host blazebox [ running FreeBSD 5.3-STABLE ] shows

program vers proto port
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100000 4 7 111 portmapper
100000 3 7 111 portmapper
100000 2 7 111 portmapper
100005 1 udp 752 mountd
100005 3 udp 752 mountd
100005 1 tcp 666 mountd
100005 3 tcp 666 mountd
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100021 0 udp 751 nlockmgr
100021 1 udp 751 nlockmgr
100021 3 udp 751 nlockmgr
100021 4 udp 751 nlockmgr
100021 0 tcp 965 nlockmgr
100021 1 tcp 965 nlockmgr
100021 3 tcp 965 nlockmgr
100021 4 tcp 965 nlockmgr
100024 1 udp 879 status
100024 1 tcp 645 status

Trond has helped me before with debugging NFS

--
FreeBSD the Power to Serve!

2005-03-26 05:54:43

by Jason Uhlenkott

[permalink] [raw]
Subject: Re: [ACPI] Re: 2.6.12-rc1-mm3

On Fri, Mar 25, 2005 at 11:12:39PM -0500, Len Brown wrote:
> I realize now I didn't answer your original question.
> The reason ACPI now depends on PM is that
> it makes it easier for us to do a more orderly shutdown --
> acpi registers as a device so it can do some stuff
> upon the PM device shutdowns -- before interrupts are disabled.
>
> I think with all the twisty turney passages
> related to the suspend states, poweroff, sys-req, and now kexec,
> that it is best if we can keep the code paths as
> common as possible or some of them will never get the
> testing needed to prevent them from getting broken.
>
> Also, it is now common practice to include PM && ACPI together
> in the x86 world. Though technically one could have
> ACPI w/o PM and you'd have lost only ACPI_SLEEP, virtually
> nobody seems to use/depend-on that combination.

OK, that makes sense. I see now that Jesse has already sent a patch
to allow CONFIG_PM on sn2, so we'll be fine as soon as that gets
merged.

2005-03-26 10:19:48

by Jean Delvare

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3, sound card lost id

> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> (...)
> bk-alsa.patch

This one made /proc/asound/card0/id change from "Live" to "Unknown" on
one of my systems, preventing alsatcl from properly restoring my mixer
settings.

I guess this wasn't exactly expected?

00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
Subsystem: Creative Labs CT4832 SBLive! Value
Flags: bus master, medium devsel, latency 48, IRQ 5
I/O ports at 8800 [size=32]

Class: 0401
Device: 1102:0002
Subsystem: 1102:8027

Thanks,
--
Jean Delvare

2005-03-26 19:39:38

by Sean Neakums

[permalink] [raw]
Subject: PCMCIA Oops (was Re: 2.6.12-rc1-mm3)

On a PowerBook5.4 I get the below when I insert the PCMCIA card or
boot with it inserted; however, if I boot with no card inserted,
sleep-resume and insert the card it works fine. Similar with
2.6.12-rc1-mm1; not sure why I didn't notice until now, since I
happily used it for six days or so, PCMCIA and all, although there was
*some* PCMCIA-related issue I failed to note and cannot now recall.


Yenta: CardBus bridge found at 0001:10:13.0 [0000:0000]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0001:10:13.0, mfunc 0x00001002, devctl 0x60
Yenta: ISA IRQ mask 0x0000, PCI irq 53
Socket status: 30000010
pcmcia: I/O behind socket: 0x0 - 0x7fffff
pcmcia: Memory behind socket: 0xf3000000 - 0xf3ffffff
pcmcia: Memory behind socket: 0x80000000 - 0xafffffff
cs: memory probe 0x80000000-0xafffffff:Machine check in kernel mode.
Caused by (from SRR1=149030): Transfer error ack signal
Oops: machine check, sig: 7 [#1]
NIP: F20CEC90 LR: F20CEC64 SP: EF8F3BE0 REGS: ef8f3b30 TRAP: 0200 Not tainted
MSR: 00149030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c12966a0[805] 'modprobe' THREAD: ef8f2000
Last syscall: 128
GPR00: 00000060 EF8F3BE0 C12966A0 F103C000 00000000 EF8F9880 00000002 EF8F3C5A
GPR08: C04B6370 F103D000 00000000 00001000 22002488 1001E284 10017070 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 C1225D40 30000000 00000000
GPR24: EF8F3C5A 00000021 00000002 C12D282C 00000000 00000000 00000002 EF8F3C5A
NIP [f20cec90] pcmcia_read_cis_mem+0x184/0x1c0 [pcmcia_core]
LR [f20cec64] pcmcia_read_cis_mem+0x158/0x1c0 [pcmcia_core]
Call trace:
[f20cefa0] read_cis_cache+0x144/0x168 [pcmcia_core]
[f20cf668] pccard_get_next_tuple+0x7c/0x2a8 [pcmcia_core]
[f20cf378] pccard_get_first_tuple+0x94/0x144 [pcmcia_core]
[f20d0fb8] pccard_validate_cis+0x94/0x27c [pcmcia_core]
[f106e3c8] readable+0x88/0xa8 [rsrc_nonstatic]
[f106e5a0] cis_readable+0xc8/0xe4 [rsrc_nonstatic]
[f106e860] do_mem_probe+0x1d0/0x1e8 [rsrc_nonstatic]
[f106e8b8] validate_mem+0x40/0x68 [rsrc_nonstatic]
[f106e99c] pcmcia_nonstatic_validate_mem+0xbc/0xc8 [rsrc_nonstatic]
[f20d134c] pcmcia_validate_mem+0x34/0x38 [pcmcia_core]
[f20e39b4] pcmcia_card_add+0x28/0xc0 [pcmcia]
[f20e441c] ds_event+0x8c/0xe4 [pcmcia]
[f20cda3c] send_event+0x70/0xc8 [pcmcia_core]
[f20ce52c] pccard_register_pcmcia+0xac/0xcc [pcmcia_core]
[f20e49b4] pcmcia_bus_add_socket+0xa8/0x104 [pcmcia]


--
Dag vijandelijk luchtschip de huismeester is dood

2005-03-26 22:00:54

by Dominik Brodowski

[permalink] [raw]
Subject: Re: PCMCIA Oops (was Re: 2.6.12-rc1-mm3)

On Sat, Mar 26, 2005 at 07:39:29PM +0000, Sean Neakums wrote:
> On a PowerBook5.4 I get the below when I insert the PCMCIA card or
> boot with it inserted; however, if I boot with no card inserted,
> sleep-resume and insert the card it works fine. Similar with
> 2.6.12-rc1-mm1; not sure why I didn't notice until now, since I
> happily used it for six days or so, PCMCIA and all, although there was
> *some* PCMCIA-related issue I failed to note and cannot now recall.

If you revert the patch named
pcmcia-mark-parent-bridge-windows-as-resources-available-for-pcmcia-devices.patch
the oops should disappear. However, I had no chance yet to fully debug
what's going on here. So I'd prefer it if you first applied the attached test
patch and sent me (off-list) the dmesg output. Also, it is very strange that
it doesn't trigger if you did a sleep-resume cycle before... Ben, any idea?

Dominik


Attachments:
(No filename) (896.00 B)
test (2.92 kB)
Download all attachments

2005-03-28 10:30:57

by Reuben Farrelly

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

Hi,

Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
>
> - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.
>
> - Again, we'd like people who have had recent DRM and USB resume problems to
> test and report, please.
>
> - The bk-ide-dev tree is back after a couple of weeks of difficulties.
>
> - Jeff asks that anyone who has had problems with the Silicon Image SATA
> drivers test sata_sil-corruption--lockup-fix.patch, which is included in
> this kernel.

I'm repeatably getting this crash on shutdown in -mm3, and a few
releases earlier (but I can't be certain it was the same crash..)

Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS4 at I/O 0xa400 (irq = 16) is a 16550A
ttyS5 at I/O 0xa408 (irq = 16) is a 16550A

This _may_ be the culprit, but I'm not sure:

03:03.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual
16550 UART) (rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd: Unknown device 0002
Flags: stepping, medium devsel, IRQ 16
I/O ports at a400 [size=32]

The board is an Intel D925XCV.

Shutdown goes like this: (yes, hyperterminal sucks for the ^M
characters, sorry)


INIT: Switching^MINIT: Sending processes the TERM signal
Stopping yum: Disabling nightly yum update: [ OK ]
[ OK ]
Stopping cups-config-daemon: [ OK ]
Stopping HAL daemon: [ OK ]
Stopping system message bus: [ OK ]
Stopping atd: [ OK ]
Stopping cups: [ OK ]
Shutting down xfs: [ OK ]
Shutting down console mouse services: [ OK ]
Unable to handle kernel paging request at virtual address f3a6ce68
printing eip:
c0244109
*pde = 00000000
Oops: 0000 [#1]
SMP DEBUG_PAGEALLOC
Modules linked in: hidp hci_usb sermouse nfsd exportfs md5 ipv6 lp
autofs4 eeprom lm85 i2c_sensor rfcomm l2cap bluetooth nfs lock
d sunrpc usb_storage pwc videodev dm_mod video button battery ac
ohci1394 ieee1394 uhci_hcd ehci_hcd parport_serial parport_pc parp
ort hw_random i2c_i801 i2c_core emu10k1_gp gameport e100 mii floppy ext3
jbd ata_piix libata sd_mod scsi_mod
CPU: 0
EIP: 0060:[<c0244109>] Not tainted VLI
EFLAGS: 00010286 (2.6.12-rc1-mm3)
EIP is at serport_ldisc_write_wakeup+0x9/0x20
eax: f3a6cdf8 ebx: f73d7000 ecx: c038e374 edx: c0244100
esi: f73d700c edi: f73d7000 ebp: c049e900 esp: f7568dc0
ds: 007b es: 007b ss: 0068
Process inputattach (pid: 2932, threadinfo=f7568000 task=f6993ac0)
Stack: c021bb08 00000286 f6c31000 c0245e4a f6c31018 f73d7000 f67c1e88
cbff5c
00000000 c021ceaa 00000000 00000000 00000000 c1e46000 c1e46000
00000000
00000000 c011b739 00000046 c1e46000 00000001 f2c00000 f2c00000
c011b8b4
Call Trace:
^M [<c021bb08>] tty_wakeup+0x48/0x70
^M [<c0245e4a>] uart_close+0xca/0x1e0
^M [<c021ceaa>] release_dev+0x14a/0x750
^M [<c011b739>] change_page_attr+0x29/0x60
^M [<c011b8b4>] kernel_map_pages+0x84/0xa0
^M [<c014cbca>] store_stackinfo+0x5a/0x90
^M [<c01664c8>] __fput+0x108/0x180
^M [<c018b59b>] inotify_inode_queue_event+0x2b/0x40
^M [<c021d97f>] tty_release+0xf/0x20
^M [<c016644a>] __fput+0x8a/0x180
^M [<c0164d7b>] filp_close+0x4b/0x70
^M [<c0125254>] put_files_struct+0x74/0x100
^M [<c012610c>] do_exit+0x11c/0x420
^M [<c012647d>] do_group_exit+0x2d/0xa0
^M [<c012f74c>] get_signal_to_deliver+0x20c/0x310
^M [<c0103deb>] do_signal+0x5b/0x140
^M [<c011ea89>] __wake_up+0x29/0x40
^M [<c021b60c>] tty_ldisc_deref+0x3c/0x70
^M [<c021c267>] tty_read+0xc7/0x130
^M [<c0243fb0>] serport_ldisc_read+0x0/0x100
^M [<c016ecd3>] sys_fstat64+0x23/0x30
^M [<c021c1a0>] tty_read+0x0/0x130
^M [<c0165547>] vfs_read+0x97/0x140
^M [<c016585c>] sys_read+0x3c/0x70
^M [<c0103efa>] do_notify_resume+0x2a/0x40
^M [<c01040be>] work_notifysig+0x13/0x25
^MCode: e8 0f b6 c5 88 4b 4b 31 d2 c1 e9 10 88 43 4a 88 4b 49 89 d0 5b
c3 8d b6 00 00 00 00 8d bf 00 00 00 00 8b 80 a8 09 00 00 8b
40 14 <8b> 50 70 85 d2 74 09 8b 52 10 85 d2 74 02 ff d2 c3 90 90 90 90
^M BUG: atomic counter underflow at:
^M [<c0126386>] do_exit+0x396/0x420
^M [<c01059f6>] die+0x166/0x170
^M [<c011a7a3>] do_page_fault+0x1f3/0x6a1
^M [<c0244109>] serport_ldisc_write_wakeup+0x9/0x20
^M [<c011b36c>] __change_page_attr+0x4c/0x3f0
^M [<c011a5b0>] do_page_fault+0x0/0x6a1
^M [<c010522f>] error_code+0x4f/0x60
^M [<c0244100>] serport_ldisc_write_wakeup+0x0/0x20
^M [<c0244109>] serport_ldisc_write_wakeup+0x9/0x20
^M [<c021bb08>] tty_wakeup+0x48/0x70
^M [<c0245e4a>] uart_close+0xca/0x1e0
^M [<c021ceaa>] release_dev+0x14a/0x750
^M [<c011b739>] change_page_attr+0x29/0x60
^M [<c011b8b4>] kernel_map_pages+0x84/0xa0
^M [<c014cbca>] store_stackinfo+0x5a/0x90
^M [<c01664c8>] __fput+0x108/0x180
^M [<c018b59b>] inotify_inode_queue_event+0x2b/0x40
^M [<c021d97f>] tty_release+0xf/0x20
^M [<c016644a>] __fput+0x8a/0x180
^M [<c0164d7b>] filp_close+0x4b/0x70
^M [<c0125254>] put_files_struct+0x74/0x100
^M [<c012610c>] do_exit+0x11c/0x420
^M [<c012647d>] do_group_exit+0x2d/0xa0
^M [<c012f74c>] get_signal_to_deliver+0x20c/0x310
^M [<c0103deb>] do_signal+0x5b/0x140
^M [<c011ea89>] __wake_up+0x29/0x40
^M [<c021b60c>] tty_ldisc_deref+0x3c/0x70
^M [<c021c267>] tty_read+0xc7/0x130
^M [<c0243fb0>] serport_ldisc_read+0x0/0x100
^M [<c016ecd3>] sys_fstat64+0x23/0x30
^M [<c021c1a0>] tty_read+0x0/0x130
^M [<c0165547>] vfs_read+0x97/0x140
^M [<c016585c>] sys_read+0x3c/0x70
^M [<c0103efa>] do_notify_resume+0x2a/0x40
^M [<c01040be>] work_notifysig+0x13/0x25
^MUnable to handle kernel NULL pointer dereference at virtual address
00000020
^M printing eip:
^Mc0121320
^M*pde = 0041f001
^MOops: 0000 [#2]
^MSMP DEBUG_PAGEALLOC

(there's a bit more, which I can put up online if it's helpful)

Reuben

2005-03-28 11:02:55

by Russell King

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

On Mon, Mar 28, 2005 at 10:30:22PM +1200, Reuben Farrelly wrote:
> Unable to handle kernel paging request at virtual address f3a6ce68
> printing eip:
> c0244109
> *pde = 00000000
> Oops: 0000 [#1]
> SMP DEBUG_PAGEALLOC
> Modules linked in: hidp hci_usb sermouse nfsd exportfs md5 ipv6 lp
> autofs4 eeprom lm85 i2c_sensor rfcomm l2cap bluetooth nfs lock
> d sunrpc usb_storage pwc videodev dm_mod video button battery ac
> ohci1394 ieee1394 uhci_hcd ehci_hcd parport_serial parport_pc parp
> ort hw_random i2c_i801 i2c_core emu10k1_gp gameport e100 mii floppy ext3
> jbd ata_piix libata sd_mod scsi_mod
> CPU: 0
> EIP: 0060:[<c0244109>] Not tainted VLI
> EFLAGS: 00010286 (2.6.12-rc1-mm3)
> EIP is at serport_ldisc_write_wakeup+0x9/0x20
> eax: f3a6cdf8 ebx: f73d7000 ecx: c038e374 edx: c0244100
> esi: f73d700c edi: f73d7000 ebp: c049e900 esp: f7568dc0
> ds: 007b es: 007b ss: 0068
> Process inputattach (pid: 2932, threadinfo=f7568000 task=f6993ac0)
> Stack: c021bb08 00000286 f6c31000 c0245e4a f6c31018 f73d7000 f67c1e88
> cbff5c
> 00000000 c021ceaa 00000000 00000000 00000000 c1e46000 c1e46000
> 00000000
> 00000000 c011b739 00000046 c1e46000 00000001 f2c00000 f2c00000
> c011b8b4
> Call Trace:
> ^M [<c021bb08>] tty_wakeup+0x48/0x70
> ^M [<c0245e4a>] uart_close+0xca/0x1e0

Looks like something in the input layer went bang. The code in
serport_ldisc_write_wakeup is:

0: 8b 80 a8 09 00 00 mov 0x9a8(%eax),%eax
6: 8b 40 14 mov 0x14(%eax),%eax
9: 8b 50 70 mov 0x70(%eax),%edx <====
c: 85 d2 test %edx,%edx
e: 74 09 je 0x19

and the marked line exploded on you. The above instructions correspond
with:

0: struct serport *sp = (struct serport *) tty->disc_data;
6: serio_drv_write_wakeup(sp->serio);
9: if (serio->drv

So, "serio" was this strange 0xf3a6cdf8 value. But why? One for the
input people I think.

> ^M [<c021ceaa>] release_dev+0x14a/0x750
> ^M [<c011b739>] change_page_attr+0x29/0x60
> ^M [<c011b8b4>] kernel_map_pages+0x84/0xa0
> ^M [<c014cbca>] store_stackinfo+0x5a/0x90
> ^M [<c01664c8>] __fput+0x108/0x180
> ^M [<c018b59b>] inotify_inode_queue_event+0x2b/0x40
> ^M [<c021d97f>] tty_release+0xf/0x20
> ^M [<c016644a>] __fput+0x8a/0x180
> ^M [<c0164d7b>] filp_close+0x4b/0x70
> ^M [<c0125254>] put_files_struct+0x74/0x100
> ^M [<c012610c>] do_exit+0x11c/0x420
> ^M [<c012647d>] do_group_exit+0x2d/0xa0
> ^M [<c012f74c>] get_signal_to_deliver+0x20c/0x310
> ^M [<c0103deb>] do_signal+0x5b/0x140
> ^M [<c011ea89>] __wake_up+0x29/0x40
> ^M [<c021b60c>] tty_ldisc_deref+0x3c/0x70
> ^M [<c021c267>] tty_read+0xc7/0x130
> ^M [<c0243fb0>] serport_ldisc_read+0x0/0x100
> ^M [<c016ecd3>] sys_fstat64+0x23/0x30
> ^M [<c021c1a0>] tty_read+0x0/0x130
> ^M [<c0165547>] vfs_read+0x97/0x140
> ^M [<c016585c>] sys_read+0x3c/0x70
> ^M [<c0103efa>] do_notify_resume+0x2a/0x40
> ^M [<c01040be>] work_notifysig+0x13/0x25
> ^MCode: e8 0f b6 c5 88 4b 4b 31 d2 c1 e9 10 88 43 4a 88 4b 49 89 d0 5b
> c3 8d b6 00 00 00 00 8d bf 00 00 00 00 8b 80 a8 09 00 00 8b
> 40 14 <8b> 50 70 85 d2 74 09 8b 52 10 85 d2 74 02 ff d2 c3 90 90 90 90
> ^M BUG: atomic counter underflow at:
> ^M [<c0126386>] do_exit+0x396/0x420
> ^M [<c01059f6>] die+0x166/0x170
> ^M [<c011a7a3>] do_page_fault+0x1f3/0x6a1
> ^M [<c0244109>] serport_ldisc_write_wakeup+0x9/0x20
> ^M [<c011b36c>] __change_page_attr+0x4c/0x3f0
> ^M [<c011a5b0>] do_page_fault+0x0/0x6a1
> ^M [<c010522f>] error_code+0x4f/0x60
> ^M [<c0244100>] serport_ldisc_write_wakeup+0x0/0x20
> ^M [<c0244109>] serport_ldisc_write_wakeup+0x9/0x20
> ^M [<c021bb08>] tty_wakeup+0x48/0x70
> ^M [<c0245e4a>] uart_close+0xca/0x1e0
> ^M [<c021ceaa>] release_dev+0x14a/0x750
> ^M [<c011b739>] change_page_attr+0x29/0x60
> ^M [<c011b8b4>] kernel_map_pages+0x84/0xa0
> ^M [<c014cbca>] store_stackinfo+0x5a/0x90
> ^M [<c01664c8>] __fput+0x108/0x180
> ^M [<c018b59b>] inotify_inode_queue_event+0x2b/0x40
> ^M [<c021d97f>] tty_release+0xf/0x20
> ^M [<c016644a>] __fput+0x8a/0x180
> ^M [<c0164d7b>] filp_close+0x4b/0x70
> ^M [<c0125254>] put_files_struct+0x74/0x100
> ^M [<c012610c>] do_exit+0x11c/0x420
> ^M [<c012647d>] do_group_exit+0x2d/0xa0
> ^M [<c012f74c>] get_signal_to_deliver+0x20c/0x310
> ^M [<c0103deb>] do_signal+0x5b/0x140
> ^M [<c011ea89>] __wake_up+0x29/0x40
> ^M [<c021b60c>] tty_ldisc_deref+0x3c/0x70
> ^M [<c021c267>] tty_read+0xc7/0x130
> ^M [<c0243fb0>] serport_ldisc_read+0x0/0x100
> ^M [<c016ecd3>] sys_fstat64+0x23/0x30
> ^M [<c021c1a0>] tty_read+0x0/0x130
> ^M [<c0165547>] vfs_read+0x97/0x140
> ^M [<c016585c>] sys_read+0x3c/0x70
> ^M [<c0103efa>] do_notify_resume+0x2a/0x40
> ^M [<c01040be>] work_notifysig+0x13/0x25

--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core

2005-03-28 11:04:01

by Reuben Farrelly

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

Reuben Farrelly wrote:

>
> I'm repeatably getting this crash on shutdown in -mm3, and a few
> releases earlier (but I can't be certain it was the same crash..)
>
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> ttyS4 at I/O 0xa400 (irq = 16) is a 16550A
> ttyS5 at I/O 0xa408 (irq = 16) is a 16550A
>
> This _may_ be the culprit, but I'm not sure:
>
> 03:03.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual
> 16550 UART) (rev 01) (prog-if 02 [16550])
> Subsystem: Timedia Technology Co Ltd: Unknown device 0002
> Flags: stepping, medium devsel, IRQ 16
> I/O ports at a400 [size=32]

Ugh. I'm an idiot, that will teach me for having two sessions to boxes
running at once.

Wrong info above, but the trace is still valid.

Correct info follows:

ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS14 at I/O 0xb400 (irq = 217) is a 16550A
ttyS15 at I/O 0xb000 (irq = 217) is a 16550A

06:02.0 Serial controller: NetMos Technology PCI 9835 Multi-I/O
Controller (rev
01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART)
Flags: medium devsel, IRQ 217
I/O ports at b400 [size=8]
I/O ports at b000 [size=8]
I/O ports at ac00 [size=8]
I/O ports at a800 [size=8]
I/O ports at a400 [size=8]
I/O ports at a000 [size=16]


> The board is an Intel D925XCV.
>
> Shutdown goes like this: (yes, hyperterminal sucks for the ^M
> characters, sorry)

<trace omitted>

reuben

2005-03-29 06:32:14

by Dmitry Torokhov

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

On Monday 28 March 2005 05:30, Reuben Farrelly wrote:
> Hi,
>
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> >
> > - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.
> >
> > - Again, we'd like people who have had recent DRM and USB resume problems to
> > test and report, please.
> >
> > - The bk-ide-dev tree is back after a couple of weeks of difficulties.
> >
> > - Jeff asks that anyone who has had problems with the Silicon Image SATA
> > drivers test sata_sil-corruption--lockup-fix.patch, which is included in
> > this kernel.
>
> I'm repeatably getting this crash on shutdown in -mm3, and a few
> releases earlier (but I can't be certain it was the same crash..)
>

It would be nice to know when it started breaking... At least point release,
not -rc or -bk.

--
Dmitry

2005-03-29 12:26:03

by Takashi Iwai

[permalink] [raw]
Subject: Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

At Sat, 26 Mar 2005 11:19:45 +0100,
Jean Delvare wrote:
>
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> > (...)
> > bk-alsa.patch
>
> This one made /proc/asound/card0/id change from "Live" to "Unknown" on
> one of my systems, preventing alsatcl from properly restoring my mixer
> settings.
>
> I guess this wasn't exactly expected?

Hmm, perhaps it's a side effect of chip detection patch by James.
But "Unknown" is bad, of course.

How does /proc/asound/cards look?


Takashi

2005-03-29 17:57:22

by Jean Delvare

[permalink] [raw]
Subject: Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

Hi Takashi,

> > This one made /proc/asound/card0/id change from "Live" to "Unknown"
> > on one of my systems, preventing alsatcl from properly restoring my
> > mixer settings.
>
> Hmm, perhaps it's a side effect of chip detection patch by James.
> But "Unknown" is bad, of course.
>
> How does /proc/asound/cards look?

0 [Unknown ]: EMU10K1 - SB Live [Unknown]
SB Live [Unknown] (rev.6, serial:0x80271102) at 0x8800, irq 5

With the bk-alsa patch reverted, it looks like:

0 [Live ]: EMU10K1 - Sound Blaster Live!
Sound Blaster Live! (rev.6, serial:0x80271102) at 0x8800, irq 5

Hope that helps. If you need any additional information, just ask.

Thanks,
--
Jean Delvare

2005-03-29 20:20:41

by Lee Revell

[permalink] [raw]
Subject: Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

On Tue, 2005-03-29 at 19:57 +0200, Jean Delvare wrote:
> Hi Takashi,
>
> > > This one made /proc/asound/card0/id change from "Live" to "Unknown"
> > > on one of my systems, preventing alsatcl from properly restoring my
> > > mixer settings.
> >
> > Hmm, perhaps it's a side effect of chip detection patch by James.
> > But "Unknown" is bad, of course.
> >
> > How does /proc/asound/cards look?
>
> 0 [Unknown ]: EMU10K1 - SB Live [Unknown]
> SB Live [Unknown] (rev.6, serial:0x80271102) at 0x8800, irq 5
>
> With the bk-alsa patch reverted, it looks like:
>
> 0 [Live ]: EMU10K1 - Sound Blaster Live!
> Sound Blaster Live! (rev.6, serial:0x80271102) at 0x8800, irq 5
>
> Hope that helps. If you need any additional information, just ask.

I think we just have to add this PCI id to the table. I got the same
result before James added the SBLive! platinum detection.

What is the output of 'lspci -v | grep -1 EMU10k1'?

Lee

2005-03-29 20:47:08

by Jean Delvare

[permalink] [raw]
Subject: Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

Hi Lee,

> I think we just have to add this PCI id to the table. I got the same
> result before James added the SBLive! platinum detection.
>
> What is the output of 'lspci -v | grep -1 EMU10k1'?

00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
Subsystem: Creative Labs CT4832 SBLive! Value

and the one you didn't ask for:

00:0d.0 Class 0401: 1102:0002 (rev 06)
Subsystem: 1102:8027

This made me realize that I could still try to hack it myself. The
following patch somehow helped:

--- linux-2.6.12-rc1-mm3/sound/pci/emu10k1/emu10k1_main.c.orig 2005-03-29 20:38:12.000000000 +0200
+++ linux-2.6.12-rc1-mm3/sound/pci/emu10k1/emu10k1_main.c 2005-03-29 22:32:23.000000000 +0200
@@ -680,6 +680,10 @@
.driver = "EMU10K1", .name = "E-mu APS [4001]",
.emu10k1_chip = 1,
.ecard = 1} ,
+ {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
+ .driver = "EMU10K1", .name = "SB Live Player 1024",
+ .emu10k1_chip = 1,
+ .ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
.driver = "EMU10K1", .name = "SB Live 5.1",
.emu10k1_chip = 1,


Now the card will be listed as "S1024" instead of "Unknown" so that's a
change. Looks like the short name is auto-generated? Unfortunately
that's still not "Live" as before so my mixer settings are not back yet.
And I believe that "Live" was a much better name than "S1024" too.

Thanks,
--
Jean Delvare

2005-03-29 20:54:46

by Lee Revell

[permalink] [raw]
Subject: Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

On Tue, 2005-03-29 at 22:46 +0200, Jean Delvare wrote:
> Hi Lee,
>
> > I think we just have to add this PCI id to the table. I got the same
> > result before James added the SBLive! platinum detection.
> >
> > What is the output of 'lspci -v | grep -1 EMU10k1'?
>
> 00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
> Subsystem: Creative Labs CT4832 SBLive! Value
>
> and the one you didn't ask for:
>
> 00:0d.0 Class 0401: 1102:0002 (rev 06)
> Subsystem: 1102:8027
>
> This made me realize that I could still try to hack it myself. The
> following patch somehow helped:
>
> --- linux-2.6.12-rc1-mm3/sound/pci/emu10k1/emu10k1_main.c.orig 2005-03-29 20:38:12.000000000 +0200
> +++ linux-2.6.12-rc1-mm3/sound/pci/emu10k1/emu10k1_main.c 2005-03-29 22:32:23.000000000 +0200
> @@ -680,6 +680,10 @@
> .driver = "EMU10K1", .name = "E-mu APS [4001]",
> .emu10k1_chip = 1,
> .ecard = 1} ,
> + {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
> + .driver = "EMU10K1", .name = "SB Live Player 1024",
> + .emu10k1_chip = 1,
> + .ac97_chip = 1} ,
> {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
> .driver = "EMU10K1", .name = "SB Live 5.1",
> .emu10k1_chip = 1,
>
>
> Now the card will be listed as "S1024" instead of "Unknown" so that's a
> change. Looks like the short name is auto-generated? Unfortunately
> that's still not "Live" as before so my mixer settings are not back yet.
> And I believe that "Live" was a much better name than "S1024" too.
>

Here is the patch (against ALSA CVS) in its preferred format. You will
probably have to apply it by hand. If the mixer settings can't be
restored you'll have to do it manually or edit asound.state by hand.

Lee

Index: alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v
retrieving revision 1.49
diff -u -r1.49 emu10k1_main.c
--- alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c 27 Mar 2005 14:00:54 -0000 1.49
+++ alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c 29 Mar 2005 20:51:44 -0000
@@ -693,6 +693,10 @@
.driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]",
.emu10k1_chip = 1,
.ac97_chip = 1} ,
+ {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
+ .driver = "EMU10K1", .name = "SBLive! Value [CT4832]",
+ .emu10k1_chip = 1,
+ .ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0002,
.driver = "EMU10K1", .name = "SB Live [Unknown]",
.emu10k1_chip = 1,

Lee

2005-03-29 21:17:33

by Jean Delvare

[permalink] [raw]
Subject: Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

Hi Lee,

> Here is the patch (against ALSA CVS) in its preferred format. You
> will probably have to apply it by hand. If the mixer settings can't
> be restored you'll have to do it manually or edit asound.state by
> hand.
>
> Lee
>
> Index: alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c
> ===================================================================
> RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v
> retrieving revision 1.49
> diff -u -r1.49 emu10k1_main.c
> --- alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c 27 Mar 2005 14:00:54 -0000 1.49
> +++ alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c 29 Mar 2005 20:51:44 -0000
> @@ -693,6 +693,10 @@
> .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]",
> .emu10k1_chip = 1,
> .ac97_chip = 1} ,
> + {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
> + .driver = "EMU10K1", .name = "SBLive! Value [CT4832]",
> + .emu10k1_chip = 1,
> + .ac97_chip = 1} ,
> {.vendor = 0x1102, .device = 0x0002,
> .driver = "EMU10K1", .name = "SB Live [Unknown]",
> .emu10k1_chip = 1,

Unsurprisingly, my card is now named CT4832. I had to edit
/etc/asound.state manually to get my mixer settings back (with some
warnings, but I get some sound).

Not sure I quite see the idea of renaming from "Live", which the user
will understand, to (I suppose) the exact chip name on the card, while
the user has certainly no idea what it is. But heh I'm not an ALSA
developer, there must be a good reason.

Thanks,
--
Jean Delvare

2005-03-29 21:21:40

by Lee Revell

[permalink] [raw]
Subject: Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

On Tue, 2005-03-29 at 23:13 +0200, Jean Delvare wrote:
> > + {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
> > + .driver = "EMU10K1", .name = "SBLive! Value [CT4832]",
> > + .emu10k1_chip = 1,
> > + .ac97_chip = 1} ,
> Unsurprisingly, my card is now named CT4832. I had to edit
> /etc/asound.state manually to get my mixer settings back (with some
> warnings, but I get some sound).
>
> Not sure I quite see the idea of renaming from "Live", which the user
> will understand, to (I suppose) the exact chip name on the card, while
> the user has certainly no idea what it is. But heh I'm not an ALSA
> developer, there must be a good reason.

Blame Creative. They have released so many different cards under the
Live! name that it's become meaningless. There are now two separate
classes of cards marketed as Live! (or Audigy) that don't even use the
same driver (ca0106 and emu10k1x), the hardware isn't even similar.
Unsurprisingly, the user confusion is massive.

The model number is the simplest unique identifier. This is also what
the "good" Windows drivers for these devices, http://www.kxproject.com,
use.

Lee

2005-03-30 12:25:08

by Takashi Iwai

[permalink] [raw]
Subject: Re: [Alsa-devel] Re: 2.6.12-rc1-mm3, sound card lost id

At Tue, 29 Mar 2005 23:13:45 +0200,
Jean Delvare wrote:
>
> Hi Lee,
>
> > Here is the patch (against ALSA CVS) in its preferred format. You
> > will probably have to apply it by hand. If the mixer settings can't
> > be restored you'll have to do it manually or edit asound.state by
> > hand.
> >
> > Lee
> >
> > Index: alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c
> > ===================================================================
> > RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v
> > retrieving revision 1.49
> > diff -u -r1.49 emu10k1_main.c
> > --- alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c 27 Mar 2005 14:00:54 -0000 1.49
> > +++ alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c 29 Mar 2005 20:51:44 -0000
> > @@ -693,6 +693,10 @@
> > .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]",
> > .emu10k1_chip = 1,
> > .ac97_chip = 1} ,
> > + {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
> > + .driver = "EMU10K1", .name = "SBLive! Value [CT4832]",
> > + .emu10k1_chip = 1,
> > + .ac97_chip = 1} ,
> > {.vendor = 0x1102, .device = 0x0002,
> > .driver = "EMU10K1", .name = "SB Live [Unknown]",
> > .emu10k1_chip = 1,
>
> Unsurprisingly, my card is now named CT4832. I had to edit
> /etc/asound.state manually to get my mixer settings back (with some
> warnings, but I get some sound).
>
> Not sure I quite see the idea of renaming from "Live", which the user
> will understand, to (I suppose) the exact chip name on the card, while
> the user has certainly no idea what it is. But heh I'm not an ALSA
> developer, there must be a good reason.

Changing the name to more descriptive one is a good thing, IMO.
But, of course, it's a regression if the system gets (somehow) broken
after the update.

We can add a hack to set id explicitly to be compatible with older
version...


Takashi

2005-03-30 18:48:52

by Dmitry Torokhov

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

On Monday 28 March 2005 06:02, Russell King wrote:
> Looks like something in the input layer went bang. ?The code in
> serport_ldisc_write_wakeup is:
>
> ? ?0: ? 8b 80 a8 09 00 00 ? ? ? mov ? ?0x9a8(%eax),%eax
> ? ?6: ? 8b 40 14 ? ? ? ? ? ? ? ?mov ? ?0x14(%eax),%eax
> ? ?9: ? 8b 50 70 ? ? ? ? ? ? ? ?mov ? ?0x70(%eax),%edx <====
> ? ?c: ? 85 d2 ? ? ? ? ? ? ? ? ? test ? %edx,%edx
> ? ?e: ? 74 09 ? ? ? ? ? ? ? ? ? je ? ? 0x19
>
> and the marked line exploded on you. ?The above instructions correspond
> with:
>
> 0:??????struct serport *sp = (struct serport *) tty->disc_data;
> 6:??????serio_drv_write_wakeup(sp->serio);
> 9:??????if (serio->drv
>
> So, "serio" was this strange 0xf3a6cdf8 value. ?But why? ?One for the
> input people I think.

Reuben, could you please try the patch below? Thanks!

Russell, could you please tell me if ldisc->write_wakeup (tty_wakwup) and
ldisc->read are allowed to be called from an IRQ context? IOW I wonder if
I can use spil_lock_bh instead of spil_lock_irqsave to protect serport
flags.

--
Dmitry

serport.c | 98 +++++++++++++++++++++++++++++++++++++++++++-------------------
1 files changed, 68 insertions(+), 30 deletions(-)

Index: dtor/drivers/input/serio/serport.c
===================================================================
--- dtor.orig/drivers/input/serio/serport.c
+++ dtor/drivers/input/serio/serport.c
@@ -27,11 +27,15 @@ MODULE_LICENSE("GPL");
MODULE_ALIAS_LDISC(N_MOUSE);

#define SERPORT_BUSY 1
+#define SERPORT_ACTIVE 2
+#define SERPORT_DEAD 3

struct serport {
struct tty_struct *tty;
wait_queue_head_t wait;
struct serio *serio;
+ struct serio_device_id id;
+ spinlock_t lock;
unsigned long flags;
};

@@ -45,11 +49,29 @@ static int serport_serio_write(struct se
return -(serport->tty->driver->write(serport->tty, &data, 1) != 1);
}

+static int serport_serio_open(struct serio *serio)
+{
+ struct serport *serport = serio->port_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&serport->lock, flags);
+ set_bit(SERPORT_ACTIVE, &serport->flags);
+ spin_unlock_irqrestore(&serport->lock, flags);
+
+ return 0;
+}
+
+
static void serport_serio_close(struct serio *serio)
{
struct serport *serport = serio->port_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&serport->lock, flags);
+ clear_bit(SERPORT_ACTIVE, &serport->flags);
+ set_bit(SERPORT_DEAD, &serport->flags);
+ spin_unlock_irqrestore(&serport->lock, flags);

- serport->serio->id.type = 0;
wake_up_interruptible(&serport->wait);
}

@@ -61,36 +83,21 @@ static void serport_serio_close(struct s
static int serport_ldisc_open(struct tty_struct *tty)
{
struct serport *serport;
- struct serio *serio;
- char name[64];

if (!capable(CAP_SYS_ADMIN))
return -EPERM;

- serport = kmalloc(sizeof(struct serport), GFP_KERNEL);
- serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
- if (unlikely(!serport || !serio)) {
- kfree(serport);
- kfree(serio);
+ serport = kcalloc(1, sizeof(struct serport), GFP_KERNEL);
+ if (!serport)
return -ENOMEM;
- }

- memset(serport, 0, sizeof(struct serport));
- serport->serio = serio;
- set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
serport->tty = tty;
- tty->disc_data = serport;
-
- memset(serio, 0, sizeof(struct serio));
- strlcpy(serio->name, "Serial port", sizeof(serio->name));
- snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name));
- serio->id.type = SERIO_RS232;
- serio->write = serport_serio_write;
- serio->close = serport_serio_close;
- serio->port_data = serport;
-
+ spin_lock_init(&serport->lock);
init_waitqueue_head(&serport->wait);

+ tty->disc_data = serport;
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+
return 0;
}

@@ -100,7 +107,8 @@ static int serport_ldisc_open(struct tty

static void serport_ldisc_close(struct tty_struct *tty)
{
- struct serport *serport = (struct serport*) tty->disc_data;
+ struct serport *serport = (struct serport *) tty->disc_data;
+
kfree(serport);
}

@@ -116,9 +124,19 @@ static void serport_ldisc_close(struct t
static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
{
struct serport *serport = (struct serport*) tty->disc_data;
+ unsigned long flags;
int i;
+
+ spin_lock_irqsave(&serport->lock, flags);
+
+ if (!test_bit(SERPORT_ACTIVE, &serport->flags))
+ goto out;
+
for (i = 0; i < count; i++)
serio_interrupt(serport->serio, cp[i], 0, NULL);
+
+out:
+ spin_unlock_irqrestore(&serport->lock, flags);
}

/*
@@ -141,16 +159,33 @@ static int serport_ldisc_room(struct tty
static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, unsigned char __user * buf, size_t nr)
{
struct serport *serport = (struct serport*) tty->disc_data;
+ struct serio *serio;
char name[64];

if (test_and_set_bit(SERPORT_BUSY, &serport->flags))
return -EBUSY;

+ serport->serio = serio = kcalloc(1, sizeof(struct serio), GFP_KERNEL);
+ if (!serio)
+ return -ENOMEM;
+
+ strlcpy(serio->name, "Serial port", sizeof(serio->name));
+ snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name));
+ serio->id = serport->id;
+ serio->id.type = SERIO_RS232;
+ serio->write = serport_serio_write;
+ serio->open = serport_serio_open;
+ serio->close = serport_serio_close;
+ serio->port_data = serport;
+
serio_register_port(serport->serio);
printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name));
- wait_event_interruptible(serport->wait, !serport->serio->id.type);
+
+ wait_event_interruptible(serport->wait, test_bit(SERPORT_DEAD, &serport->flags));
serio_unregister_port(serport->serio);
+ serport->serio = NULL;

+ clear_bit(SERPORT_DEAD, &serport->flags);
clear_bit(SERPORT_BUSY, &serport->flags);

return 0;
@@ -163,16 +198,15 @@ static ssize_t serport_ldisc_read(struct
static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
{
struct serport *serport = (struct serport*) tty->disc_data;
- struct serio *serio = serport->serio;
unsigned long type;

if (cmd == SPIOCSTYPE) {
if (get_user(type, (unsigned long __user *) arg))
return -EFAULT;

- serio->id.proto = type & 0x000000ff;
- serio->id.id = (type & 0x0000ff00) >> 8;
- serio->id.extra = (type & 0x00ff0000) >> 16;
+ serport->id.proto = type & 0x000000ff;
+ serport->id.id = (type & 0x0000ff00) >> 8;
+ serport->id.extra = (type & 0x00ff0000) >> 16;

return 0;
}
@@ -182,9 +216,13 @@ static int serport_ldisc_ioctl(struct tt

static void serport_ldisc_write_wakeup(struct tty_struct * tty)
{
- struct serport *sp = (struct serport *) tty->disc_data;
+ struct serport *serport = (struct serport *) tty->disc_data;
+ unsigned long flags;

- serio_drv_write_wakeup(sp->serio);
+ spin_lock_irqsave(&serport->lock, flags);
+ if (test_bit(SERPORT_ACTIVE, &serport->flags))
+ serio_drv_write_wakeup(serport->serio);
+ spin_unlock_irqrestore(&serport->lock, flags);
}

/*

2005-03-31 13:07:50

by Borislav Petkov

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

On Friday 25 March 2005 17:46, Borislav Petkov wrote:
> Hi Andrew,
>
> mm3 still not booting on my machine. Boot option 'nmi_watchdog=2' (my cpu
> is a dual core pentium 4 HT, 2.60 GHz) gets me a bit further in the boot
> process but it blocks there too.
>
> [output retyped from screen]:
> kernel: [ 4.109241] PM: Checking swsusp image.
> kernel: [ 4.109244] PM: Resume from disk failed.
> kernel: [ 4.112220] VFS: Mounted root (ext2 filesystem) readonly.
> kernel: [ 4.112465] Freeing unused kernel memory: 188k freed
> kernel: [ 4.142002] logips2pp: Detected unknown logitech mouse model 1
> kernel: [ 4.274620] input: PS/2 Logitech Mouse on isa0060/serio1
> <--- [point of previous blocks without boot option 'nmi_watchdog=2']--->
> INIT: version 2.86 booting
> Mounting a tmpfs over /dev... done.
> Creating initial device nodes... done.
> Setting parameters of disc: (none).
> Activating swap.
> kernel: [ 10.712648] Adding 976744k swap on /dev/hda2. Priority:-1
> extents:1 Checking root file system...
> fsck 1.36 (05-Feb-2005)
> /: clean, 127290/1831424 files, 898566/3662056 blocks
> [EOF]

Hi Andrew,

i finally got to run kdb within mm3 and I got a bit further but am not sure
whether I'm debugging in the right direction:

After booting with "kdb=early" I found out that the kernel blocks with the
partial message:

kmem_cache_create: Early error in slab task_struct
kernel BUG at mm/slab.c:1215
invalid operand: 0000 [#1]
PREEMPT SMP

and here all dies. After singlestepping through the code, I found out that
start_kernel calls at offset 0x14d fork_init, which calls at offset 0x39
kmem_cache_create. kmem_cache_create performs some initial checks:

1205 /*
1206 * Sanity checks... these are all serious usage bugs.
1207 */
1208 if ((!name) ||
1209 in_interrupt() ||
1210 (size < BYTES_PER_WORD) ||
1211 (size > (1<<MAX_OBJ_ORDER)*PAGE_SIZE) ||
1212 (dtor && !ctor)) {
1213 printk(KERN_ERR "%s: Early error in slab %s\n",
1214 __FUNCTION__, name);
1215 BUG();
1216 }

And after singlestepping a little bit more, I found out that the
in_interrupt() check returns true and printk is executed. Here's the
disassembled code:

00000b10 <kmem_cache_create>:
kmem_cache_create():
mm/slab.c:1201
b10: 55 push %ebp
b11: 89 e5 mov %esp,%ebp
b13: 57 push %edi
b14: 56 push %esi
b15: 53 push %ebx
b16: 83 ec 3c sub $0x3c,%esp
mm/slab.c:1208
b19: 8b 55 08 mov 0x8(%ebp),%edx
b1c: 85 d2 test %edx,%edx
b1e: 0f 84 01 08 00 00 je 1325 <kmem_cache_create+0x815>
include/asm/thread_info.h:91
b24: b8 00 f0 ff ff mov $0xfffff000,%eax
b29: 21 e0 and %esp,%eax
include/asm/thread_info.h:89
b2b: f7 40 14 00 ff ff 0f testl $0xfffff00,0x14(%eax)
b32: 0f 85 ed 07 00 00 jne 1325 <kmem_cache_create+0x815> <---

this jump here executes and line 0x1325 is:

mm/slab.c:1213
1325: c7 04 24 40 02 00 00 movl $0x240,(%esp)
132c: 8b 45 08 mov 0x8(%ebp),%eax
132f: 89 44 24 08 mov %eax,0x8(%esp)
1333: b8 0d 00 00 00 mov $0xd,%eax
1338: 89 44 24 04 mov %eax,0x4(%esp)
133c: e8 fc ff ff ff call 133d <kmem_cache_create+0x82d>
mm/slab.c:1215
1341: 0f 0b ud2a
1343: bf 04 00 00 00 mov $0x4,%edi
1348: 00 e9 add %ch,%cl
134a: 13 f8 adc %eax,%edi
134c: ff (bad)
134d: ff c7 inc %edi

and BUG() is called.

Any suggestions or corrections will be greatly appreciated.

Regards,
Boris.

2005-03-31 20:11:50

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

Borislav Petkov <[email protected]> wrote:
>
> On Friday 25 March 2005 17:46, Borislav Petkov wrote:
> > Hi Andrew,
> >
> > mm3 still not booting on my machine. Boot option 'nmi_watchdog=2' (my cpu
> > is a dual core pentium 4 HT, 2.60 GHz) gets me a bit further in the boot
> > process but it blocks there too.
> >
> > [output retyped from screen]:
> > kernel: [ 4.109241] PM: Checking swsusp image.
> > kernel: [ 4.109244] PM: Resume from disk failed.
> > kernel: [ 4.112220] VFS: Mounted root (ext2 filesystem) readonly.
> > kernel: [ 4.112465] Freeing unused kernel memory: 188k freed
> > kernel: [ 4.142002] logips2pp: Detected unknown logitech mouse model 1
> > kernel: [ 4.274620] input: PS/2 Logitech Mouse on isa0060/serio1
> > <--- [point of previous blocks without boot option 'nmi_watchdog=2']--->
> > INIT: version 2.86 booting
> > Mounting a tmpfs over /dev... done.
> > Creating initial device nodes... done.
> > Setting parameters of disc: (none).
> > Activating swap.
> > kernel: [ 10.712648] Adding 976744k swap on /dev/hda2. Priority:-1
> > extents:1 Checking root file system...
> > fsck 1.36 (05-Feb-2005)
> > /: clean, 127290/1831424 files, 898566/3662056 blocks
> > [EOF]
>
> Hi Andrew,
>
> i finally got to run kdb within mm3 and I got a bit further but am not sure
> whether I'm debugging in the right direction:
>
> After booting with "kdb=early" I found out that the kernel blocks with the
> partial message:
>
> kmem_cache_create: Early error in slab task_struct
> kernel BUG at mm/slab.c:1215
> invalid operand: 0000 [#1]
> PREEMPT SMP

Beats me. Where did the kdb patch come from?

It sounds like kdb for some reason is leaving the calling task in
in_interrupt() state when it shouldn't. You could try removing the
in_interrupt() test, but things will probably die later on.

It might be worth disabling preempt, although a bug there won't cause
in_interrupt() to return true.

Did you send me your .config?

2005-03-31 21:00:45

by Borislav Petkov

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

On Thursday 31 March 2005 22:11, Andrew Morton wrote:
> Borislav Petkov <[email protected]> wrote:
> > On Friday 25 March 2005 17:46, Borislav Petkov wrote:
> > > Hi Andrew,
> > >
> > > mm3 still not booting on my machine. Boot option 'nmi_watchdog=2' (my
> > > cpu is a dual core pentium 4 HT, 2.60 GHz) gets me a bit further in
> > > the boot process but it blocks there too.
> > >
> > > [output retyped from screen]:
> > > kernel: [ 4.109241] PM: Checking swsusp image.
> > > kernel: [ 4.109244] PM: Resume from disk failed.
> > > kernel: [ 4.112220] VFS: Mounted root (ext2 filesystem) readonly.
> > > kernel: [ 4.112465] Freeing unused kernel memory: 188k freed
> > > kernel: [ 4.142002] logips2pp: Detected unknown logitech mouse
> > > model 1 kernel: [ 4.274620] input: PS/2 Logitech Mouse on
> > > isa0060/serio1 <--- [point of previous blocks without boot option
> > > 'nmi_watchdog=2']---> INIT: version 2.86 booting
> > > Mounting a tmpfs over /dev... done.
> > > Creating initial device nodes... done.
> > > Setting parameters of disc: (none).
> > > Activating swap.
> > > kernel: [ 10.712648] Adding 976744k swap on /dev/hda2. Priority:-1
> > > extents:1 Checking root file system...
> > > fsck 1.36 (05-Feb-2005)
> > > /: clean, 127290/1831424 files, 898566/3662056 blocks
> > > [EOF]
> >
> > Hi Andrew,
> >
> > i finally got to run kdb within mm3 and I got a bit further but am not
> > sure whether I'm debugging in the right direction:
> >
> > After booting with "kdb=early" I found out that the kernel blocks with
> > the partial message:
> >
> > kmem_cache_create: Early error in slab task_struct
> > kernel BUG at mm/slab.c:1215
> > invalid operand: 0000 [#1]
> > PREEMPT SMP
>
> Beats me. Where did the kdb patch come from?
oss.sgi.com
> It sounds like kdb for some reason is leaving the calling task in
> in_interrupt() state when it shouldn't. You could try removing the
> in_interrupt() test, but things will probably die later on.
No, that doesn't change anything. It stops at the same point even on mm4 which
is without the kdb patch.

> It might be worth disabling preempt, although a bug there won't cause
> in_interrupt() to return true.
disabling preempt doesn't change that either. I'll run more kdb sessions
tomorrow to see what's going on.

> Did you send me your .config?
yes, in some of the previous mails but here you go again.

Regards,
Boris.


Attachments:
(No filename) (2.38 kB)
config-2.6.12-rc1-mm4 (29.47 kB)
Download all attachments

2005-04-02 03:46:42

by Reuben Farrelly

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

Hi Dmitry and others,

At 06:41 a.m. 31/03/2005, Dmitry Torokhov wrote:
>On Monday 28 March 2005 06:02, Russell King wrote:
> > Looks like something in the input layer went bang. The code in
> > serport_ldisc_write_wakeup is:
> >
> > 0: 8b 80 a8 09 00 00 mov 0x9a8(%eax),%eax
> > 6: 8b 40 14 mov 0x14(%eax),%eax
> > 9: 8b 50 70 mov 0x70(%eax),%edx <====
> > c: 85 d2 test %edx,%edx
> > e: 74 09 je 0x19
> >
> > and the marked line exploded on you. The above instructions correspond
> > with:
> >
> > 0: struct serport *sp = (struct serport *) tty->disc_data;
> > 6: serio_drv_write_wakeup(sp->serio);
> > 9: if (serio->drv
> >
> > So, "serio" was this strange 0xf3a6cdf8 value. But why? One for the
> > input people I think.
>
>Reuben, could you please try the patch below? Thanks!
>
>Russell, could you please tell me if ldisc->write_wakeup (tty_wakwup) and
>ldisc->read are allowed to be called from an IRQ context? IOW I wonder if
>I can use spil_lock_bh instead of spil_lock_irqsave to protect serport
>flags.
>
>--
>Dmitry
>
> serport.c | 98
> +++++++++++++++++++++++++++++++++++++++++++-------------------
> 1 files changed, 68 insertions(+), 30 deletions(-)
>
>Index: dtor/drivers/input/serio/serport.c
>===================================================================
>--- dtor.orig/drivers/input/serio/serport.c
>+++ dtor/drivers/input/serio/serport.c
>@@ -27,11 +27,15 @@ MODULE_LICENSE("GPL");
> MODULE_ALIAS_LDISC(N_MOUSE);


I've done some testing this afternoon and it seems that this patch
fixes the problem in -mm4. I don't even have a serial
mouse/keyboard, but do have a serial PCI card onboard. The box has a
USB connection to a Belkin KVM instead of directly attached input devices.

I also note that it is occurring on kernel-smp-2.6.11-1.1219_FC4 - so
it is probably a problem in mainline as well as -mm.


Now I'm crashing a bit further through the shutdown, here's the stacktrace:

INIT: Sending processes the TERM signal
Stopping yum: Disabling nightly yum update: [ OK ]
[ OK ]
Stopping cups-config-daemon: [ OK ]
Stopping HAL daemon: [ OK ]
Stopping system message bus: [ OK ]
Stopping atd: [ OK ]
Stopping cups: [ OK ]
Shutting down xfs: [ OK ]
[ OK ] down console mouse services: [ OK ]
Shutting down NFS mountd: [ OK ]
Shutting down NFS daemon: nfsd: last server has exited
nfsd: unexporting all filesystems
RPC: error 5 connecting to server localhost
RPC: failed to contact portmap (errno -5).
Unable to handle kernel paging request at virtual address f2826d2c
printing eip:
c01337a9
*pde = 00000000
Oops: 0000 [#1]
SMP DEBUG_PAGEALLOC
Modules linked in: nfsd exportfs md5 ipv6 lp snd_usb_audio
snd_usb_lib pwc video
dev usb_storage autofs4 eeprom lm85 i2c_sensor rfcomm l2cap bluetooth nfs lockd
sunrpc dm_mod video button battery ac ohci1394 ieee1394 uhci_hcd
ehci_hcd parpor
t_serial parport_pc parport hw_random i2c_i801 i2c_core emu10k1_gp
gameport snd_
emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm_oss
snd_mixer_oss snd_
pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore
e100 mii flopp
y ext3 jbd ata_piix libata sd_mod scsi_mod
CPU: 0
EIP: 0060:[<c01337a9>] Not tainted VLI
EFLAGS: 00010087 (2.6.12-rc1-mm4)
EIP is at worker_thread+0x149/0x230
eax: 00000001 ebx: 00000212 ecx: f7eb4018 edx: f2826d20
esi: f2826d24 edi: f7eb4000 ebp: 00000000 esp: f7e83f7c
ds: 007b es: 007b ss: 0068
Process events/0 (pid: 8, threadinfo=f7e83000 task=f7fefad0)
Stack: f7eb4028 f7eb4010 f7eb4018 f7e83000 f2826d20 c014f4b0 00000001 00000000
000f41fa 00010000 00000000 00000000 f7fefad0 c011ea50 00100100 00200200
ffffffff ffffffff fffffffc f7e46f54 f7eb4000 c0133660 c0137694 ffffffff
Call Trace:
[<c014f4b0>] cache_reap+0x0/0x240
[<c011ea50>] default_wake_function+0x0/0x10
[<c0133660>] worker_thread+0x0/0x230
[<c0137694>] kthread+0x94/0xa0
[<c0137600>] kthread+0x0/0xa0
[<c01023f5>] kernel_thread_helper+0x5/0x10
Code: 00 00 89 f8 e8 19 e3 1e 00 89 c3 8b 47 40 40 89 47 40 83 f8 03
0f 8f bd 00
00 00 8b 77 10 3b 74 24 04 74 71 8d 56 fc 89 54 24 10 <8b> 42 0c 89
44 24 14 8b
6a 10 8b 46 04 8b 16 89 10 89 36 89 42
[ OK ]
Shutting down NFS quotas: [FAILED]
Shutting down NFS services: [ OK ]
Stopping sshd: [ OK ]
Stopping postfix: Shutting down postfix: <3>BUG: soft lockup
detected on CPU#0!

Pid: 3413, comm: rpc.rquotad
EIP: 0060:[<c0321ac0>] CPU: 0
EIP is at _spin_lock_irqsave+0x20/0x50
EFLAGS: 00000286 Not tainted (2.6.12-rc1-mm4)
EAX: f7eb4000 EBX: 00000246 ECX: f7eb4000 EDX: c22021a0
ESI: f7eb4000 EDI: c22021a0 EBP: c01335b0 DS: 007b ES: 007b
CR0: 8005003b CR2: 800147fc CR3: 37256d20 CR4: 000006e0
[<c013350c>] __queue_work+0xc/0x50
[<c012cc17>] run_timer_softirq+0xd7/0x1c0
[<c0128950>] __do_softirq+0x80/0x100
[<c0106adb>] do_softirq+0x4b/0x50
=======================
[<c010511c>] apic_timer_interrupt+0x1c/0x30
[<c02b7ed8>] kfree_skbmem+0x8/0x20
[<c02b007b>] cpufreq_governor+0x3b/0x50
[<c014eed2>] kfree+0x62/0x90
[<c02b7ed8>] kfree_skbmem+0x8/0x20
[<c02b7fcc>] __kfree_skb+0xdc/0x1a0
[<c02d2501>] netlink_recvmsg+0xf1/0x230
[<c02b422a>] sock_recvmsg+0xfa/0x120
[<c02b40d2>] sock_sendmsg+0xe2/0x110
[<c0137b20>] autoremove_wake_function+0x0/0x30
[<c0149d32>] __alloc_pages+0x122/0x440
[<c01d94a2>] copy_from_user+0x42/0x80
[<c02b5ba9>] sys_recvmsg+0x109/0x1e0
[<c01d94a2>] copy_from_user+0x42/0x80
[<c02b553e>] sys_sendto+0xfe/0x140
[<c011a863>] do_page_fault+0x253/0x6a1
[<c017c6a1>] d_alloc+0x141/0x1a0
[<c01648d1>] fd_install+0x21/0x50
[<c02b3e57>] sock_map_fd+0xf7/0x130
[<c032068d>] schedule+0x97d/0xc10
[<c02b5e67>] sys_socketcall+0x1e7/0x200
[<c0103fbb>] sysenter_past_esp+0x54/0x79

System is an up to date FC4- devel box with a 2.8 Ghz SMP Intel processor.

reuben



2005-05-02 22:54:48

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3: box hangs solid on resume from disk while resuming device drivers

"Rafael J. Wysocki" <[email protected]> wrote:
>
> Hi,
>
> On Friday, 25 of March 2005 09:21, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> >
> > - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.
>
> First, rmmod works again (thanks ;-)).
>
> > - Again, we'd like people who have had recent DRM and USB resume problems to
> > test and report, please.
>
> My box is still hanged solid on resume (swsusp) by the drivers:
>
> ohci_hcd
> ehci_hcd
> yenta_socket
>
> possibly others, too. To avoid this, I had to revert the following patch from
> the Len's tree:

Rafael, does this problem still exist in latest -mm?

I think it does...


> diff -Naru a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
> --- a/drivers/acpi/pci_link.c 2005-03-24 04:57:27 -08:00
> +++ b/drivers/acpi/pci_link.c 2005-03-24 04:57:27 -08:00
> @@ -72,10 +72,12 @@
> u8 active; /* Current IRQ */
> u8 edge_level; /* All IRQs */
> u8 active_high_low; /* All IRQs */
> - u8 initialized;
> u8 resource_type;
> u8 possible_count;
> u8 possible[ACPI_PCI_LINK_MAX_POSSIBLE];
> + u8 initialized:1;
> + u8 suspend_resume:1;
> + u8 reserved:6;
> };
>
> struct acpi_pci_link {
> @@ -530,6 +532,10 @@
>
> ACPI_FUNCTION_TRACE("acpi_pci_link_allocate");
>
> + if (link->irq.suspend_resume) {
> + acpi_pci_link_set(link, link->irq.active);
> + link->irq.suspend_resume = 0;
> + }
> if (link->irq.initialized)
> return_VALUE(0);
>
> @@ -713,38 +719,24 @@
> return_VALUE(result);
> }
>
> -
> -static int
> -acpi_pci_link_resume (
> - struct acpi_pci_link *link)
> -{
> - ACPI_FUNCTION_TRACE("acpi_pci_link_resume");
> -
> - if (link->irq.active && link->irq.initialized)
> - return_VALUE(acpi_pci_link_set(link, link->irq.active));
> - else
> - return_VALUE(0);
> -}
> -
> -
> static int
> -irqrouter_resume(
> - struct sys_device *dev)
> +irqrouter_suspend(
> + struct sys_device *dev,
> + u32 state)
> {
> struct list_head *node = NULL;
> struct acpi_pci_link *link = NULL;
>
> - ACPI_FUNCTION_TRACE("irqrouter_resume");
> + ACPI_FUNCTION_TRACE("irqrouter_suspend");
>
> list_for_each(node, &acpi_link.entries) {
> -
> link = list_entry(node, struct acpi_pci_link, node);
> if (!link) {
> ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n"));
> continue;
> }
> -
> - acpi_pci_link_resume(link);
> + if (link->irq.active && link->irq.initialized)
> + link->irq.suspend_resume = 1;
> }
> return_VALUE(0);
> }
> @@ -856,7 +848,7 @@
>
> static struct sysdev_class irqrouter_sysdev_class = {
> set_kset_name("irqrouter"),
> - .resume = irqrouter_resume,
> + .suspend = irqrouter_suspend,
> };
>
>
> # This is a BitKeeper generated diff -Nru style patch.
> #
> # ChangeSet
> # 2005/03/18 16:30:29-05:00 [email protected]
> # [ACPI] S3 Suspend to RAM: interrupt resume fix
> #
> # Delete PCI Interrupt Link Device .resume method --
> # it is the device driver's job to request interrupts,
> # not the Link's job to remember what the devices want.
> #
> # This addresses the issue of attempting to run
> # the ACPI interpreter too early in resume, when
> # interrupts are still disabled.
> #
> # http://bugzilla.kernel.org/show_bug.cgi?id=3469
> #
> # Signed-off-by: David Shaohua Li <[email protected]>
> # Signed-off-by: Len Brown <[email protected]>
> #
> # drivers/acpi/pci_link.c
> # 2005/03/02 22:23:50-05:00 [email protected] +14 -22
> # Delete PCI Interrupt Link .resume method
> #
>
> Greets,
> Rafael
>
>
> --
> - Would you tell me, please, which way I ought to go from here?
> - That depends a good deal on where you want to get to.
> -- Lewis Carroll "Alice's Adventures in Wonderland"

2005-05-03 19:33:44

by Rafael J. Wysocki

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3: box hangs solid on resume from disk while resuming device drivers

Hi,

On Tuesday, 3 of May 2005 00:54, Andrew Morton wrote:
> "Rafael J. Wysocki" <[email protected]> wrote:
> >
> > Hi,
> >
> > On Friday, 25 of March 2005 09:21, Andrew Morton wrote:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm3/
> > >
> > > - Mainly a bunch of fixes relative to 2.6.12-rc1-mm2.
> >
> > First, rmmod works again (thanks ;-)).
> >
> > > - Again, we'd like people who have had recent DRM and USB resume problems to
> > > test and report, please.
> >
> > My box is still hanged solid on resume (swsusp) by the drivers:
> >
> > ohci_hcd
> > ehci_hcd
> > yenta_socket
> >
> > possibly others, too. To avoid this, I had to revert the following patch from
> > the Len's tree:
>
> Rafael, does this problem still exist in latest -mm?

Yes, it does. I've already updated its bugzilla entry
(http://bugzilla.kernel.org/show_bug.cgi?id=4416).

Greets,
Rafael

--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"

2005-05-26 04:22:03

by Andrew Morton

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

Reuben Farrelly <[email protected]> wrote:
>
> >
> >Reuben, could you please try the patch below? Thanks!
> >
> >Russell, could you please tell me if ldisc->write_wakeup (tty_wakwup) and
> >ldisc->read are allowed to be called from an IRQ context? IOW I wonder if
> >I can use spil_lock_bh instead of spil_lock_irqsave to protect serport
> >flags.
> >
> >--
> >Dmitry
> >
> > serport.c | 98
> > +++++++++++++++++++++++++++++++++++++++++++-------------------
> > 1 files changed, 68 insertions(+), 30 deletions(-)
> >
> >Index: dtor/drivers/input/serio/serport.c
> >===================================================================
> >--- dtor.orig/drivers/input/serio/serport.c
> >+++ dtor/drivers/input/serio/serport.c
> >@@ -27,11 +27,15 @@ MODULE_LICENSE("GPL");
> > MODULE_ALIAS_LDISC(N_MOUSE);
>
>
> I've done some testing this afternoon and it seems that this patch
> fixes the problem in -mm4. I don't even have a serial
> mouse/keyboard, but do have a serial PCI card onboard. The box has a
> USB connection to a Belkin KVM instead of directly attached input devices.
>
> I also note that it is occurring on kernel-smp-2.6.11-1.1219_FC4 - so
> it is probably a problem in mainline as well as -mm.

Can you please confirm that the above fix is present in 2.6.12-rc5 and that
2.6.12-rc5 is working OK?


>
> Now I'm crashing a bit further through the shutdown, here's the stacktrace:

Is this still occurring in either 2.6.12-rc5 or 2.6.12-rc5-mm1?

> INIT: Sending processes the TERM signal
> Stopping yum: Disabling nightly yum update: [ OK ]
> [ OK ]
> Stopping cups-config-daemon: [ OK ]
> Stopping HAL daemon: [ OK ]
> Stopping system message bus: [ OK ]
> Stopping atd: [ OK ]
> Stopping cups: [ OK ]
> Shutting down xfs: [ OK ]
> [ OK ] down console mouse services: [ OK ]
> Shutting down NFS mountd: [ OK ]
> Shutting down NFS daemon: nfsd: last server has exited
> nfsd: unexporting all filesystems
> RPC: error 5 connecting to server localhost
> RPC: failed to contact portmap (errno -5).
> Unable to handle kernel paging request at virtual address f2826d2c
> printing eip:
> c01337a9
> *pde = 00000000
> Oops: 0000 [#1]
> SMP DEBUG_PAGEALLOC
> Modules linked in: nfsd exportfs md5 ipv6 lp snd_usb_audio
> snd_usb_lib pwc video
> dev usb_storage autofs4 eeprom lm85 i2c_sensor rfcomm l2cap bluetooth nfs lockd
> sunrpc dm_mod video button battery ac ohci1394 ieee1394 uhci_hcd
> ehci_hcd parpor
> t_serial parport_pc parport hw_random i2c_i801 i2c_core emu10k1_gp
> gameport snd_
> emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm_oss
> snd_mixer_oss snd_
> pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore
> e100 mii flopp
> y ext3 jbd ata_piix libata sd_mod scsi_mod
> CPU: 0
> EIP: 0060:[<c01337a9>] Not tainted VLI
> EFLAGS: 00010087 (2.6.12-rc1-mm4)
> EIP is at worker_thread+0x149/0x230
> eax: 00000001 ebx: 00000212 ecx: f7eb4018 edx: f2826d20
> esi: f2826d24 edi: f7eb4000 ebp: 00000000 esp: f7e83f7c
> ds: 007b es: 007b ss: 0068
> Process events/0 (pid: 8, threadinfo=f7e83000 task=f7fefad0)
> Stack: f7eb4028 f7eb4010 f7eb4018 f7e83000 f2826d20 c014f4b0 00000001 00000000
> 000f41fa 00010000 00000000 00000000 f7fefad0 c011ea50 00100100 00200200
> ffffffff ffffffff fffffffc f7e46f54 f7eb4000 c0133660 c0137694 ffffffff
> Call Trace:
> [<c014f4b0>] cache_reap+0x0/0x240
> [<c011ea50>] default_wake_function+0x0/0x10
> [<c0133660>] worker_thread+0x0/0x230
> [<c0137694>] kthread+0x94/0xa0
> [<c0137600>] kthread+0x0/0xa0
> [<c01023f5>] kernel_thread_helper+0x5/0x10
> Code: 00 00 89 f8 e8 19 e3 1e 00 89 c3 8b 47 40 40 89 47 40 83 f8 03
> 0f 8f bd 00
> 00 00 8b 77 10 3b 74 24 04 74 71 8d 56 fc 89 54 24 10 <8b> 42 0c 89
> 44 24 14 8b
> 6a 10 8b 46 04 8b 16 89 10 89 36 89 42
> [ OK ]
> Shutting down NFS quotas: [FAILED]
> Shutting down NFS services: [ OK ]
> Stopping sshd: [ OK ]
> Stopping postfix: Shutting down postfix: <3>BUG: soft lockup
> detected on CPU#0!
>
> Pid: 3413, comm: rpc.rquotad
> EIP: 0060:[<c0321ac0>] CPU: 0
> EIP is at _spin_lock_irqsave+0x20/0x50
> EFLAGS: 00000286 Not tainted (2.6.12-rc1-mm4)
> EAX: f7eb4000 EBX: 00000246 ECX: f7eb4000 EDX: c22021a0
> ESI: f7eb4000 EDI: c22021a0 EBP: c01335b0 DS: 007b ES: 007b
> CR0: 8005003b CR2: 800147fc CR3: 37256d20 CR4: 000006e0
> [<c013350c>] __queue_work+0xc/0x50
> [<c012cc17>] run_timer_softirq+0xd7/0x1c0
> [<c0128950>] __do_softirq+0x80/0x100
> [<c0106adb>] do_softirq+0x4b/0x50
> =======================
> [<c010511c>] apic_timer_interrupt+0x1c/0x30
> [<c02b7ed8>] kfree_skbmem+0x8/0x20
> [<c02b007b>] cpufreq_governor+0x3b/0x50
> [<c014eed2>] kfree+0x62/0x90
> [<c02b7ed8>] kfree_skbmem+0x8/0x20
> [<c02b7fcc>] __kfree_skb+0xdc/0x1a0
> [<c02d2501>] netlink_recvmsg+0xf1/0x230
> [<c02b422a>] sock_recvmsg+0xfa/0x120
> [<c02b40d2>] sock_sendmsg+0xe2/0x110
> [<c0137b20>] autoremove_wake_function+0x0/0x30
> [<c0149d32>] __alloc_pages+0x122/0x440
> [<c01d94a2>] copy_from_user+0x42/0x80
> [<c02b5ba9>] sys_recvmsg+0x109/0x1e0
> [<c01d94a2>] copy_from_user+0x42/0x80
> [<c02b553e>] sys_sendto+0xfe/0x140
> [<c011a863>] do_page_fault+0x253/0x6a1
> [<c017c6a1>] d_alloc+0x141/0x1a0
> [<c01648d1>] fd_install+0x21/0x50
> [<c02b3e57>] sock_map_fd+0xf7/0x130
> [<c032068d>] schedule+0x97d/0xc10
> [<c02b5e67>] sys_socketcall+0x1e7/0x200
> [<c0103fbb>] sysenter_past_esp+0x54/0x79
>
> System is an up to date FC4- devel box with a 2.8 Ghz SMP Intel processor.
>
> reuben
>

2005-05-26 10:11:33

by Reuben Farrelly

[permalink] [raw]
Subject: Re: 2.6.12-rc1-mm3

Hi,

On 26/05/2005 4:20 p.m., Andrew Morton wrote:
> Reuben Farrelly <[email protected]> wrote:
>
>>>Reuben, could you please try the patch below? Thanks!
>>>
>>>Russell, could you please tell me if ldisc->write_wakeup (tty_wakwup) and
>>>ldisc->read are allowed to be called from an IRQ context? IOW I wonder if
>>>I can use spil_lock_bh instead of spil_lock_irqsave to protect serport
>>>flags.
>>>
>>>--
>>>Dmitry
>>>
>>> serport.c | 98
>>>+++++++++++++++++++++++++++++++++++++++++++-------------------
>>> 1 files changed, 68 insertions(+), 30 deletions(-)
>>>
>>>Index: dtor/drivers/input/serio/serport.c
>>>===================================================================
>>>--- dtor.orig/drivers/input/serio/serport.c
>>>+++ dtor/drivers/input/serio/serport.c
>>>@@ -27,11 +27,15 @@ MODULE_LICENSE("GPL");
>>> MODULE_ALIAS_LDISC(N_MOUSE);
>>
>>
>>I've done some testing this afternoon and it seems that this patch
>>fixes the problem in -mm4. I don't even have a serial
>>mouse/keyboard, but do have a serial PCI card onboard. The box has a
>>USB connection to a Belkin KVM instead of directly attached input devices.
>>
>>I also note that it is occurring on kernel-smp-2.6.11-1.1219_FC4 - so
>>it is probably a problem in mainline as well as -mm.
>
>
> Can you please confirm that the above fix is present in 2.6.12-rc5 and that
> 2.6.12-rc5 is working OK?

The fix is definitely in -rc5 (thanks), and without doubt fixed the problem I
was seeing (thanks Dmitry). I haven't tested on a vanilla 2.6.12-rc5, but I
can confirm that 2.6.12-rc4-mm* releases have not had the problem. The patch
was of course in -rc4-mm* and possibly earlier?

> >>Now I'm crashing a bit further through the shutdown, here's the stacktrace:
>
>
> Is this still occurring in either 2.6.12-rc5 or 2.6.12-rc5-mm1?

2.6.12-rc4-mm* releases have been stable, I haven't seen any oopses for a few
weeks now.

If confirmation is required in -rc5 then I'm happy to attempt this, but I
don't think it's at all likely given I haven't seen any oopses at all since
that patch was included in -mm, and the patch is now in upstream.

Btw, I didn't see a lkml-announce message about -rc5-mm1 being released :( No
big deal really...

reuben