Hello,
This patch adds the Intel ESB2 DID's to the i2c-i801.c and Kconfig files for I2C support. ?This patch was built against the 2.6.11.6 kernel. ?
If acceptable, please apply. Note: ?This patch depends on the previous 1/6 patch for pci_ids.h
Thanks,
Jason Gaston
Signed-off-by: ?Jason Gaston <[email protected]>
--- linux-2.6.11.6/drivers/i2c/busses/i2c-i801.c.orig 2005-03-28 09:07:27.647899568 -0800
+++ linux-2.6.11.6/drivers/i2c/busses/i2c-i801.c 2005-03-28 09:09:04.161227312 -0800
@@ -31,6 +31,7 @@
6300ESB 25A4
ICH6 266A
ICH7 27DA
+ ESB2 269B
This driver supports several versions of Intel's I/O Controller Hubs (ICH).
For SMBus support, they are similar to the PIIX4 and are part
of Intel's '810' and other chipsets.
@@ -558,6 +559,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
{ 0, }
};
--- linux-2.6.11.6/drivers/i2c/busses/Kconfig.orig 2005-03-28 09:09:12.982886216 -0800
+++ linux-2.6.11.6/drivers/i2c/busses/Kconfig 2005-03-28 09:09:32.875862024 -0800
@@ -123,6 +123,7 @@
6300ESB
ICH6
ICH7
+ ESB2
This driver can also be built as a module. If so, the module
will be called i2c-i801.