Hi!
I got the following when i pulled the FC cable from one of my qla2312
cards.
This is a 2.6.12-rc5 kernel (with udm1 patches for 2.6.12-rc2)
May 30 14:12:45 ican-i kernel: [ 1109.864830] qla2300 0000:03:09.0: LOOP DOWN detected.
May 30 14:12:45 ican-i kernel: [ 1109.875948] Debug: sleeping function called from invalid context at include/linux/rwsem.h:43
May 30 14:12:45 ican-i kernel: [ 1109.894492] in_atomic():1, irqs_disabled():1
May 30 14:12:45 ican-i kernel: [ 1109.903864] [dump_stack+30/48] dump_stack+0x1e/0x30
May 30 14:12:45 ican-i kernel: [ 1109.913648] [__might_sleep+167/176] __might_sleep+0xa7/0xb0
May 30 14:12:45 ican-i kernel: [ 1109.924003] [device_for_each_child+35/144] device_for_each_child+0x23/0x90
May 30 14:12:45 ican-i kernel: [ 1109.935865] [pg0+944279047/1069622272] scsi_target_block+0x57/0x60 [scsi_mod]
May 30 14:12:45 ican-i kernel: [ 1109.949142] [pg0+944996009/1069622272] fc_remote_port_block+0x39/0x60 [scsi_transport_fc]
May 30 14:12:45 ican-i kernel: [ 1109.964649] [pg0+946826440/1069622272] qla2x00_mark_all_devices_lost+0x78/0x80 [qla2xxx]
May 30 14:12:45 ican-i kernel: [ 1109.980000] [pg0+946857000/1069622272] qla2x00_async_event+0x4b8/0xd20 [qla2xxx]
May 30 14:12:45 ican-i kernel: [ 1109.993778] [pg0+946855321/1069622272] qla2300_intr_handler+0x149/0x220 [qla2xxx]
May 30 14:12:45 ican-i kernel: [ 1110.007748] [handle_IRQ_event+51/112] handle_IRQ_event+0x33/0x70
May 30 14:12:45 ican-i kernel: [ 1110.018709] [__do_IRQ+230/320] __do_IRQ+0xe6/0x140
May 30 14:12:45 ican-i kernel: [ 1110.028321] [do_IRQ+55/112] do_IRQ+0x37/0x70
May 30 14:12:45 ican-i kernel: [ 1110.037362] [common_interrupt+26/32] common_interrupt+0x1a/0x20
May 30 14:12:45 ican-i kernel: [ 1110.048270] [cpu_idle+114/128] cpu_idle+0x72/0x80
May 30 14:12:45 ican-i kernel: [ 1110.057657] [start_kernel+407/480] start_kernel+0x197/0x1e0
May 30 14:12:45 ican-i kernel: [ 1110.068222] [L6+0/2] 0xc010020e
May 30 14:13:03 ican-i kernel: [ 1127.266792] qla2300 0000:03:09.0: LIP reset occured (f8e8).
May 30 14:13:03 ican-i kernel: [ 1127.373378] qla2300 0000:03:09.0: LIP occured (f7e8).
May 30 14:13:03 ican-i kernel: [ 1127.384479] qla2300 0000:03:09.0: LOOP UP detected (2 Gbps).
--
Ake Sandgren, HPC2N, Umea University, S-90187 Umea, Sweden
Internet: [email protected] Phone: +46 90 7866134 Fax: +46 90 7866126
Mobile: +46 70 7716134 WWW: http://www.hpc2n.umu.se
[email protected] (Ake) wrote:
>
> Hi!
> I got the following when i pulled the FC cable from one of my qla2312
> cards.
> This is a 2.6.12-rc5 kernel (with udm1 patches for 2.6.12-rc2)
>
>
> May 30 14:12:45 ican-i kernel: [ 1109.864830] qla2300 0000:03:09.0: LOOP DOWN detected.
> May 30 14:12:45 ican-i kernel: [ 1109.875948] Debug: sleeping function called from invalid context at include/linux/rwsem.h:43
> May 30 14:12:45 ican-i kernel: [ 1109.894492] in_atomic():1, irqs_disabled():1
> May 30 14:12:45 ican-i kernel: [ 1109.903864] [dump_stack+30/48] dump_stack+0x1e/0x30
> May 30 14:12:45 ican-i kernel: [ 1109.913648] [__might_sleep+167/176] __might_sleep+0xa7/0xb0
> May 30 14:12:45 ican-i kernel: [ 1109.924003] [device_for_each_child+35/144] device_for_each_child+0x23/0x90
> May 30 14:12:45 ican-i kernel: [ 1109.935865] [pg0+944279047/1069622272] scsi_target_block+0x57/0x60 [scsi_mod]
> May 30 14:12:45 ican-i kernel: [ 1109.949142] [pg0+944996009/1069622272] fc_remote_port_block+0x39/0x60 [scsi_transport_fc]
> May 30 14:12:45 ican-i kernel: [ 1109.964649] [pg0+946826440/1069622272] qla2x00_mark_all_devices_lost+0x78/0x80 [qla2xxx]
> May 30 14:12:45 ican-i kernel: [ 1109.980000] [pg0+946857000/1069622272] qla2x00_async_event+0x4b8/0xd20 [qla2xxx]
> May 30 14:12:45 ican-i kernel: [ 1109.993778] [pg0+946855321/1069622272] qla2300_intr_handler+0x149/0x220 [qla2xxx]
> May 30 14:12:45 ican-i kernel: [ 1110.007748] [handle_IRQ_event+51/112] handle_IRQ_event+0x33/0x70
> May 30 14:12:45 ican-i kernel: [ 1110.018709] [__do_IRQ+230/320] __do_IRQ+0xe6/0x140
> May 30 14:12:45 ican-i kernel: [ 1110.028321] [do_IRQ+55/112] do_IRQ+0x37/0x70
> May 30 14:12:45 ican-i kernel: [ 1110.037362] [common_interrupt+26/32] common_interrupt+0x1a/0x20
> May 30 14:12:45 ican-i kernel: [ 1110.048270] [cpu_idle+114/128] cpu_idle+0x72/0x80
> May 30 14:12:45 ican-i kernel: [ 1110.057657] [start_kernel+407/480] start_kernel+0x197/0x1e0
> May 30 14:12:45 ican-i kernel: [ 1110.068222] [L6+0/2] 0xc010020e
> May 30 14:13:03 ican-i kernel: [ 1127.266792] qla2300 0000:03:09.0: LIP reset occured (f8e8).
> May 30 14:13:03 ican-i kernel: [ 1127.373378] qla2300 0000:03:09.0: LIP occured (f7e8).
> May 30 14:13:03 ican-i kernel: [ 1127.384479] qla2300 0000:03:09.0: LOOP UP detected (2 Gbps).
>
This was reported (and anaylsed) a month ago:
http://lkml.org/lkml/2005/4/29/82
I don't know if anything has been done about it yet though?