Hi !
We are developing (GPLed) disk cloning software similar to partimage: it's an
intelligent 'dd' which backups only used sectors.
Recently I added LVM1/2 support to it, and sometimes we saw LVM restorations
failing randomly (Disk images are not corrupted, but the result of the
restoration can be lead to a corrupted filesystem). If a restoration fails, just
try another one and it will work...
How the restoration program works:
- I restore the LVM2 administrative data (384 sectors, most of the time),
- I 'vgscan', 'vgchange',
- open for writing the '/dev/dm-xxxx',
- read a compressed file over NFS,
- and put the sectors in place, so it's a succession of '_llseek()' and
'write()' to the DM device.
But, *sometimes*, for example, the current seek position is at 9GB, and some
data is written to sector 0 ! It happens randomly.
Here is a typical strace of a restoration:
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
_llseek(5, 20963328, [37604032512], SEEK_CUR) = 0
_llseek(5, 0, [37604032512], SEEK_CUR) = 0
_llseek(5, 2097152, [37606129664], SEEK_CUR) = 0
write(5, "\1\335E\0\f\0\1\2.\0\0\0\2\0\0\0\364\17\2\2..\0\0\0\0\0"..., 512) = 51
2
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
write(5, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 512) = 512
_llseek(5, 88076288, [37694210048], SEEK_CUR) = 0
_llseek(5, 0, [37694210048], SEEK_CUR) = 0
_llseek(5, 20971520, [37715181568], SEEK_CUR) = 0
write(5, "\377\377\377\377\377\377\377\377\377\377\377\377\377\377"..., 512) = 5
12
....
....
As you can see, there are no seeks to sector 0, but something randomly write
some data to sector 0 !
I could reproduce these random problems on different kind of PCs.
But, the strace above comes from an improved version, which aggregates
'_llseek's. A previous version, which did *many* 512 bytes seeks had much more
problems. Aggregating seeks made the corruption to appears very rarely... And I
more likely to happen, for a 40GB restoration than for a 10GB one.
So less system calls to the DM/LVM2 layer seems to give less corruption probability.
Any ideas ? Newer kernel releases could have fixed such a problem ?
--
Ludovic DROLEZ Linbox / Free&ALter Soft
http://lrs.linbox.org - Linbox Rescue Server GPL edition
On Thu, Sep 08, 2005 at 11:58:54AM +0200 Ludovic Drolez wrote:
> Hi !
>
> We are developing (GPLed) disk cloning software similar to partimage: it's
> an intelligent 'dd' which backups only used sectors.
>
> Recently I added LVM1/2 support to it, and sometimes we saw LVM
> restorations failing randomly (Disk images are not corrupted, but the
> result of the restoration can be lead to a corrupted filesystem). If a
> restoration fails, just try another one and it will work...
>
Please upgrade to 2.6.12.6 (I don't remember exactly in which
2.6.12.x it went in), it contains a bugfix that should fix what
you are seeing. 2.6.13 also has this.
* Alexander Nyberg ([email protected]) wrote:
> Please upgrade to 2.6.12.6 (I don't remember exactly in which
> 2.6.12.x it went in), it contains a bugfix that should fix what
> you are seeing. 2.6.13 also has this.
Yep, that was 2.6.12.4, and here's the patch:
http://www.kernel.org/git/?p=linux/kernel/git/chrisw/stable-queue.git;a=blob_plain;h=6267a6b8da4b52eaf0fbddd9091a6e6ff2fe233c
thanks,
-chris