I have also tried to switch to kernel 2.6.13-ck3 and after about 2 hours the
machine is completely frozen. I have than applied the proposed patch
from Linus for a simmilar problem on 2.6.13.1 but it didn't help.
My Machine is an Athlon64 running debian 3.1 in 64bit.
Here is the difference between the output of lspci -WX on 2.6.12.5 and
from 2.6.13-ck3
manz@hardy> diff -W50 lspci-vvx-2.6.12.5 lspci-vvx-2.6.13-ck3
77c77
< Interrupt: pin A routed to IRQ 11
---
> Interrupt: pin A routed to IRQ 16
187c187
< Latency: 64, Cache Line Size: 0x10 (64 bytes)
---
> Latency: 64, Cache Line Size: 0x08 (32 bytes)
191c191
< 00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 40 80 00
---
> 00: 06 11 04 31 17 00 10 02 86 20 03 0c 08 40 80 00
manz@hardy> diff -U50 lspci-vvx-2.6.12.5 lspci-vvx-2.6.13-ck3
--- lspci-vvx-2.6.12.5 2005-09-13 13:31:56.000000000 +0200
+++ lspci-vvx-2.6.13.1-ck3 2005-09-13 17:09:16.000000000 +0200
@@ -27,101 +27,101 @@
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3282
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 06 11 82 32 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4282
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 06 11 82 42 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7282
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 06 11 82 72 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800
South] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: faf00000-fbffffff
Prefetchable memory behind bridge: e0000000-f9ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00: 06 11 88 b1 07 01 30 02 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 22
20: f0 fa f0 fb 00 e0 f0 f9 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0a 00
0000:00:09.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus
Reference Card (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 130f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
- Interrupt: pin A routed to IRQ 11
+ Interrupt: pin A routed to IRQ 16
Region 0: Memory at faa00000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <available only to root>
00: 14 18 01 02 17 01 10 04 01 00 80 02 08 40 00 00
10: 00 00 a0 fa 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 06 00 00 43 10 0f 13
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit
Ethernet 10/100/1000Base-T Adapter (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 811a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fac00000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at b000 [size=256]
Expansion ROM at fab00000 [disabled] [size=128K]
Capabilities: <available only to root>
00: ab 11 20 43 17 01 b0 02 13 00 00 02 08 40 00 00
10: 00 00 c0 fa 01 b0 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1a 81
30: 00 00 b0 fa 48 00 00 00 00 00 00 00 0a 01 17 1f
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80)
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at c800 [size=4]
Region 2: I/O ports at c400 [size=8]
Region 3: I/O ports at c000 [size=4]
Region 4: I/O ports at b800 [size=16]
Region 5: I/O ports at b400 [size=256]
Capabilities: <available only to root>
00: 06 11 49 31 07 00 90 02 80 00 04 01 00 40 80 00
10: 01 d0 00 00 01 c8 00 00 01 c4 00 00 01 c0 00 00
20: 01 b8 00 00 01 b4 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 c0 00 00 00 00 00 00 00 04 02 00 00
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at fc00 [size=16]
Capabilities: <available only to root>
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -137,105 +137,105 @@
Region 4: I/O ports at d400 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if
20 [EHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
- Latency: 64, Cache Line Size: 0x10 (64 bytes)
+ Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fae00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
-00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 40 80 00
+00: 06 11 04 31 17 00 10 02 86 20 03 0c 08 40 80 00
10: 00 00 e0 fa 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800
South]
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Asustek Computer, Inc.: Unknown device 812a
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at e800 [size=256]
Capabilities: <available only to root>
00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 2a 81
30: 00 00 00 00 c0 00 00 00 00 00 00 00 06 03 00 00
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: <available only to root>
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
manz@hardy>
--
-----------------------------------------------------------------------------
Hartmut Manz WWW: http://www.intes.de
INTES GmbH Phone: +49-711-78499-29
Schulze-Delitzsch-Str. 16 Fax: +49-711-78499-10
D-70565 Stuttgart E-mail: [email protected]
Himmel und Erde werden vergehen; meine Worte aber werden nicht vergehen.
------------------------------------------------------ Markus 13,31 --------
On Wed, 14 Sep 2005 19:25, Hartmut Manz wrote:
> I have also tried to switch to kernel 2.6.13-ck3 and after about 2 hours
> the machine is completely frozen. I have than applied the proposed patch
> from Linus for a simmilar problem on 2.6.13.1 but it didn't help.
-ck currently has a unique problem with 250HZ as well. Try 1000 if you are
using 250.
Cheers,
Con
On Wednesday, 14. September 2005 11:35, Con Kolivas wrote:
> On Wed, 14 Sep 2005 19:25, Hartmut Manz wrote:
> > I have also tried to switch to kernel 2.6.13-ck3 and after about 2 hours
> > the machine is completely frozen. I have than applied the proposed patch
> > from Linus for a simmilar problem on 2.6.13.1 but it didn't help.
>
> -ck currently has a unique problem with 250HZ as well. Try 1000 if you are
> using 250.
>
Yes I was using 250 HZ.
So I will recompile the Kernel now and come back with an answer later
Thank You
Hartmut
> Cheers,
> Con
--
-----------------------------------------------------------------------------
Hartmut Manz WWW: http://www.intes.de
INTES GmbH Phone: +49-711-78499-29
Schulze-Delitzsch-Str. 16 Fax: +49-711-78499-10
D-70565 Stuttgart E-mail: [email protected]
Himmel und Erde werden vergehen; meine Worte aber werden nicht vergehen.
------------------------------------------------------ Markus 13,31 --------
On Wednesday, 14. September 2005 11:35, Con Kolivas wrote:
> On Wed, 14 Sep 2005 19:25, Hartmut Manz wrote:
> > I have also tried to switch to kernel 2.6.13-ck3 and after about 2 hours
> > the machine is completely frozen. I have than applied the proposed patch
> > from Linus for a simmilar problem on 2.6.13.1 but it didn't help.
>
> -ck currently has a unique problem with 250HZ as well. Try 1000 if you are
> using 250.
>
My machine is still running, so the problem was 250 HZ and is solved now.
Thank You
Hartmut
> Cheers,
> Con
--
-----------------------------------------------------------------------------
Hartmut Manz WWW: http://www.intes.de
INTES GmbH Phone: +49-711-78499-29
Schulze-Delitzsch-Str. 16 Fax: +49-711-78499-10
D-70565 Stuttgart E-mail: [email protected]
Himmel und Erde werden vergehen; meine Worte aber werden nicht vergehen.
------------------------------------------------------ Markus 13,31 --------