2005-09-18 13:57:46

by Christian Fischer

[permalink] [raw]

Subject: x86: mounting scsi-cdrom: kernel panic with vanilla and others, works with ac

---

Hi all.

Some days ago I've tried 2.6.12-cko3 and got "Kernel panic - not syncing:
Fatal exception in interrupt" by mounting the cdrom (scsi). Known problem I
thought, I had this if I tried to switch from 2.6.11-ac7 to 2.6.11-gentoo.

To point out if this is a problem of gentoo-base patches or cko-patches i
tried 2.6.12-vanilla and got Kernel panic.

Mainboard: SuperMicro MBD-P4SCT-0
Chipset: Intel 875
CPU: Intel P4 2,4
Memory: ECC
SCSI: Tekram TRM-S1040

CONFIG_X86_GOOD_APIC=y
# CONFIG_X86_UP_APIC is not set

CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_SATA=y
CONFIG_SCSI_ATA_PIIX=y
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y


Regards
Christian
--

---

Attachments:

(No filename) (901.00 B)
(No filename) (189.00 B)
Download all attachments

2005-09-18 19:52:38

by Randy Dunlap

[permalink] [raw]

Subject: Re: x86: mounting scsi-cdrom: kernel panic with vanilla and others, works with ac

---

On Sun, 18 Sep 2005 15:57:37 +0200 Christian Fischer wrote:

> Hi all.
>
> Some days ago I've tried 2.6.12-cko3 and got "Kernel panic - not syncing:
> Fatal exception in interrupt" by mounting the cdrom (scsi). Known problem I
> thought, I had this if I tried to switch from 2.6.11-ac7 to 2.6.11-gentoo.

Need kernel message log, please.

> To point out if this is a problem of gentoo-base patches or cko-patches i
> tried 2.6.12-vanilla and got Kernel panic.

How about 2.6.14-rc1 ?

> Mainboard: SuperMicro MBD-P4SCT-0
> Chipset: Intel 875
> CPU: Intel P4 2,4
> Memory: ECC
> SCSI: Tekram TRM-S1040
>
> CONFIG_X86_GOOD_APIC=y
> # CONFIG_X86_UP_APIC is not set
>
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_SPI_ATTRS=m
> CONFIG_SCSI_SATA=y
> CONFIG_SCSI_ATA_PIIX=y
> CONFIG_SCSI_SYM53C8XX_2=m
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> CONFIG_SCSI_QLA2XXX=y
> CONFIG_SCSI_DC395x=y
> CONFIG_SCSI_DC390T=y


---
~Randy
You can't do anything without having to do something else first.
-- Belefant's Law