-stable review patch. If anyone has any objections, please let us know.
------------------
Here is the patch (fuzz removed) for 2.6.13.2 that fixes
OOPs when using bonding with skge.
Skge driver was bringing link up/down when changing mac
address. This doesn't work in the bonding environment, and is
more effort than needed.
Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5271
Signed-off-by: Stephen Hemminger <[email protected]>
Sigend-off-by: Chris Wright <[email protected]>
---
drivers/net/skge.c | 24 ++++++++++++++++--------
1 files changed, 16 insertions(+), 8 deletions(-)
Index: linux-2.6.13.y/drivers/net/skge.c
===================================================================
--- linux-2.6.13.y.orig/drivers/net/skge.c
+++ linux-2.6.13.y/drivers/net/skge.c
@@ -2828,21 +2828,29 @@ static void skge_netpoll(struct net_devi
static int skge_set_mac_address(struct net_device *dev, void *p)
{
struct skge_port *skge = netdev_priv(dev);
- struct sockaddr *addr = p;
- int err = 0;
+ struct skge_hw *hw = skge->hw;
+ unsigned port = skge->port;
+ const struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
- skge_down(dev);
+ spin_lock_bh(&hw->phy_lock);
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
- memcpy_toio(skge->hw->regs + B2_MAC_1 + skge->port*8,
+ memcpy_toio(hw->regs + B2_MAC_1 + port*8,
dev->dev_addr, ETH_ALEN);
- memcpy_toio(skge->hw->regs + B2_MAC_2 + skge->port*8,
+ memcpy_toio(hw->regs + B2_MAC_2 + port*8,
dev->dev_addr, ETH_ALEN);
- if (dev->flags & IFF_UP)
- err = skge_up(dev);
- return err;
+
+ if (hw->chip_id == CHIP_ID_GENESIS)
+ xm_outaddr(hw, port, XM_SA, dev->dev_addr);
+ else {
+ gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
+ gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
+ }
+ spin_unlock_bh(&hw->phy_lock);
+
+ return 0;
}
static const struct {
--