Hi,
Reproducable i get a kernel panic when inserting the e1000 module on my
system. It is P4 with hyperthreading enabled. 1GB ram.
lspci output:
00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02)
00:03.0 PCI bridge: Intel Corp. 82875P Processor to PCI to CSA Bridge (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra TF
02:01.0 Ethernet controller: Intel Corp. 82547EI Gigabit Ethernet Controller (LOM)
03:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
03:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
03:0a.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 50)
03:0a.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 50)
03:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
03:0b.0 Communication controller: Individual Computers - Jens Schoenfeld Intel 537
03:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
03:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
03:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
I've placed the .config here: http://keetweej.vanheusden.com/~folkert/e1000_crash_.config
dmesg output (when the system starts, don't have it from a crash as the system frashes hard): http://keetweej.vanheusden.com/~folkert/e1000_crash_dmesg
screendump (so that one can verify if I didn't make any typing errors): http://keetweej.vanheusden.com/~folkert/e1000_crash_screendump.jpg
Ok and what is written in the dump:
c013dfc0 handle_irq_event+0x50/0x60
c0105796 __do_irq+0xc6/0x70
c0103796 common_interrupt+0x1a/0x20
c01f1768 acpi_processor_idle+0x10d/0x2b1
c0100d70 cpu_idle+0x70/0x80
c03ca8db start_kernel+0x14b/0x170
Code: 44 24 0c 0f 31 89 44 24 04 b9 04 etc. (hand to handwrite it down)
Folkert van Heusden
--
Try MultiTail! Multiple windows with logfiles, filtered with regular
expressions, colored output, etc. etc. http://www.vanheusden.com/multitail/
----------------------------------------------------------------------
Get your PGP/GPG key signed at http://www.biglumber.com!
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, http://www.vanheusden.com
