Hi,
The patch below fixes the following sparse warnings:
drivers/net/e100.c:1481:13: warning: Using plain integer as NULL pointer
drivers/net/e100.c:1481:13: warning: Using plain integer as NULL pointer
drivers/net/e100.c:1767:27: warning: Using plain integer as NULL pointer
drivers/net/e100.c:1847:27: warning: Using plain integer as NULL pointer
Signed-off-by: Luiz Capitulino <[email protected]>
drivers/net/e100.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1478,7 +1478,7 @@ static inline int e100_rx_alloc_skb(stru
if(pci_dma_mapping_error(rx->dma_addr)) {
dev_kfree_skb_any(rx->skb);
- rx->skb = 0;
+ rx->skb = NULL;
rx->dma_addr = 0;
return -ENOMEM;
}
@@ -1764,7 +1764,7 @@ static int e100_up(struct nic *nic)
if((err = e100_hw_init(nic)))
goto err_clean_cbs;
e100_set_multicast_list(nic->netdev);
- e100_start_receiver(nic, 0);
+ e100_start_receiver(nic, NULL);
mod_timer(&nic->watchdog, jiffies);
if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ,
nic->netdev->name, nic->netdev)))
@@ -1844,7 +1844,7 @@ static int e100_loopback_test(struct nic
mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
BMCR_LOOPBACK);
- e100_start_receiver(nic, 0);
+ e100_start_receiver(nic, NULL);
if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) {
err = -ENOMEM;
--
Luiz Fernando N. Capitulino