Hi,
I have an IBM T42 with 2.6.14-git and this specific USB Key has never worked
for me. Any idea?
USB Key Kingston DataTraveler
hub 4-0:1.0: state 5 ports 6 chg 0000 evt 0010
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
usb 4-4: new high speed USB device using ehci_hcd and address 5
ehci_hcd 0000:00:1d.7: port 4 high speed
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
usb 4-4: default language 0x0409
usb 4-4: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4: Product: DataTraveler 2.0
usb 4-4: Manufacturer: Kingston
usb 4-4: SerialNumber: 2840E64152121B80
usb 4-4: hotplug
usb 4-4: adding 4-4:1.0 (config #1, interface 0)
usb 4-4:1.0: hotplug
usb-storage 4-4:1.0: usb_probe_interface
usb-storage 4-4:1.0: usb_probe_interface - got id
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 4.10
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 251904 512-byte hdwr sectors (129 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 251904 512-byte hdwr sectors (129 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
sdb: [CUMANA/ADFS] sdb1<5>sd 2:0:0:0: Attached scsi removable disk sdb
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
printk: 4 messages suppressed.
Buffer I/O error on device sdb1, logical block 508378384
Buffer I/O error on device sdb1, logical block 508378384
Buffer I/O error on device sdb1, logical block 508378412
Buffer I/O error on device sdb1, logical block 508378412
Buffer I/O error on device sdb1, logical block 508378412
Buffer I/O error on device sdb1, logical block 508378412
Buffer I/O error on device sdb1, logical block 508378412
--
Open WebMail Project (http://openwebmail.org)
On Tue, Nov 08, 2005 at 05:08:12PM -0500, Alejandro Bonilla wrote:
> Hi,
Hi Alejandro,
> I have an IBM T42 with 2.6.14-git and this specific USB Key has never worked
> for me. Any idea?
is this problem still present in 2.6.15-rc7?
> USB Key Kingston DataTraveler
>
>
> hub 4-0:1.0: state 5 ports 6 chg 0000 evt 0010
> ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
> hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
> hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:1d.7: port 4 high speed
> ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
> usb 4-4: new high speed USB device using ehci_hcd and address 5
> ehci_hcd 0000:00:1d.7: port 4 high speed
> ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
> usb 4-4: default language 0x0409
> usb 4-4: new device strings: Mfr=1, Product=2, SerialNumber=3
> usb 4-4: Product: DataTraveler 2.0
> usb 4-4: Manufacturer: Kingston
> usb 4-4: SerialNumber: 2840E64152121B80
> usb 4-4: hotplug
> usb 4-4: adding 4-4:1.0 (config #1, interface 0)
> usb 4-4:1.0: hotplug
> usb-storage 4-4:1.0: usb_probe_interface
> usb-storage 4-4:1.0: usb_probe_interface - got id
> scsi2 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 5
> usb-storage: waiting for device to settle before scanning
> Vendor: Kingston Model: DataTraveler 2.0 Rev: 4.10
> Type: Direct-Access ANSI SCSI revision: 02
> SCSI device sdb: 251904 512-byte hdwr sectors (129 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 0b 00 00 08
> sdb: assuming drive cache: write through
> SCSI device sdb: 251904 512-byte hdwr sectors (129 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 0b 00 00 08
> sdb: assuming drive cache: write through
> sdb: [CUMANA/ADFS] sdb1<5>sd 2:0:0:0: Attached scsi removable disk sdb
> sd 2:0:0:0: Attached scsi generic sg1 type 0
> usb-storage: device scan complete
> printk: 4 messages suppressed.
> Buffer I/O error on device sdb1, logical block 508378384
> Buffer I/O error on device sdb1, logical block 508378384
> Buffer I/O error on device sdb1, logical block 508378412
> Buffer I/O error on device sdb1, logical block 508378412
> Buffer I/O error on device sdb1, logical block 508378412
> Buffer I/O error on device sdb1, logical block 508378412
> Buffer I/O error on device sdb1, logical block 508378412
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed