Needed to boot some ARM boards.
Signed-Off-By: Daniel Walker <[email protected]>
Index: linux-2.6.14/kernel/irq/handle.c
===================================================================
--- linux-2.6.14.orig/kernel/irq/handle.c
+++ linux-2.6.14/kernel/irq/handle.c
@@ -196,8 +196,9 @@ struct irq_type default_level_type = {
*/
struct irq_type default_simple_type = {
.typename = "default_simple",
- .enable = noop,
- .disable = noop,
+ .enable = default_enable,
+ .disable = default_disable,
+ .set_type = default_set_type,
.handle_irq = handle_simple_irq,
};
doesnt apply. Also, the set_type line has whitespace damage.
Ingo
* Daniel Walker <[email protected]> wrote:
>
> Needed to boot some ARM boards.
>
> Signed-Off-By: Daniel Walker <[email protected]>
>
> Index: linux-2.6.14/kernel/irq/handle.c
> ===================================================================
> --- linux-2.6.14.orig/kernel/irq/handle.c
> +++ linux-2.6.14/kernel/irq/handle.c
> @@ -196,8 +196,9 @@ struct irq_type default_level_type = {
> */
> struct irq_type default_simple_type = {
> .typename = "default_simple",
> - .enable = noop,
> - .disable = noop,
> + .enable = default_enable,
> + .disable = default_disable,
> + .set_type = default_set_type,
> .handle_irq = handle_simple_irq,
> };
Teach me not use pine. I'll send it attached privatly, I think it's been
well reviewed anyway .
Daniel
On Sat, 2005-11-12 at 15:48 +0100, Ingo Molnar wrote:
> doesnt apply. Also, the set_type line has whitespace damage.
>
> Ingo
>
> * Daniel Walker <[email protected]> wrote:
>
> >
> > Needed to boot some ARM boards.
> >
> > Signed-Off-By: Daniel Walker <[email protected]>
> >
> > Index: linux-2.6.14/kernel/irq/handle.c
> > ===================================================================
> > --- linux-2.6.14.orig/kernel/irq/handle.c
> > +++ linux-2.6.14/kernel/irq/handle.c
> > @@ -196,8 +196,9 @@ struct irq_type default_level_type = {
> > */
> > struct irq_type default_simple_type = {
> > .typename = "default_simple",
> > - .enable = noop,
> > - .disable = noop,
> > + .enable = default_enable,
> > + .disable = default_disable,
> > + .set_type = default_set_type,
> > .handle_irq = handle_simple_irq,
> > };
On Sat, 2005-11-12 at 15:48 +0100, Ingo Molnar wrote:
> doesnt apply. Also, the set_type line has whitespace damage.
>
> Ingo
I have integrated the initial patch from Tom Rini into the arm generic
irq patch set.
http://www.tglx.de/projects/armirq/
tglx
-------- Forwarded Message --------
From: Tom Rini <[email protected]>
To: Thomas Gleixner <[email protected]>
Subject: Re: ARM genirqs on OMAP
Date: Thu, 10 Nov 2005 10:11:12 -0700
Here it all is. I've been talking with Daniel right now and got it all
trimmed down:
Signed-off-by: Tom Rini <[email protected]>
Signed-off-by: Daniel Walker <[email protected]>
arch/arm/mach-omap1/board-osk.c | 2 +-
arch/arm/plat-omap/gpio.c | 2 +-
kernel/irq/handle.c | 5 +++--
3 files changed, 5 insertions(+), 4 deletions(-)
Index: linux-2.6.14/arch/arm/mach-omap1/board-osk.c
===================================================================
--- linux-2.6.14.orig/arch/arm/mach-omap1/board-osk.c
+++ linux-2.6.14/arch/arm/mach-omap1/board-osk.c
@@ -29,7 +29,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
-#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
Index: linux-2.6.14/arch/arm/plat-omap/gpio.c
===================================================================
--- linux-2.6.14.orig/arch/arm/plat-omap/gpio.c
+++ linux-2.6.14/arch/arm/plat-omap/gpio.c
@@ -736,7 +736,7 @@ static void gpio_irq_handler(unsigned in
desc->chip->ack(irq);
- bank = (struct gpio_bank *) desc->data;
+ bank = (struct gpio_bank *) desc->handler_data;
if (bank->method == METHOD_MPUIO)
isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
#ifdef CONFIG_ARCH_OMAP1510
Index: linux-2.6.14/kernel/irq/handle.c
===================================================================
--- linux-2.6.14.orig/kernel/irq/handle.c
+++ linux-2.6.14/kernel/irq/handle.c
@@ -196,8 +196,9 @@ struct irq_type default_level_type = {
*/
struct irq_type default_simple_type = {
.typename = "default_simple",
- .enable = noop,
- .disable = noop,
+ .enable = default_enable,
+ .disable = default_disable,
+ .set_type = default_set_type,
.handle_irq = handle_simple_irq,
};
On Sun, Nov 13, 2005 at 10:56:15PM +0100, Thomas Gleixner wrote:
> On Sat, 2005-11-12 at 15:48 +0100, Ingo Molnar wrote:
> > doesnt apply. Also, the set_type line has whitespace damage.
> >
> > Ingo
>
> I have integrated the initial patch from Tom Rini into the arm generic
> irq patch set.
>
> http://www.tglx.de/projects/armirq/
Which was from Daniel of cousre.
--
Tom Rini
http://gate.crashing.org/~trini/
On Sun, 2005-11-13 at 15:11 -0700, Tom Rini wrote:
> On Sun, Nov 13, 2005 at 10:56:15PM +0100, Thomas Gleixner wrote:
> > On Sat, 2005-11-12 at 15:48 +0100, Ingo Molnar wrote:
> > > doesnt apply. Also, the set_type line has whitespace damage.
> > >
> > > Ingo
> >
> > I have integrated the initial patch from Tom Rini into the arm generic
> > irq patch set.
> >
> > http://www.tglx.de/projects/armirq/
>
> Which was from Daniel of cousre.
Sorry, was not obvious from the mail and Signed-off lines
tglx
* Thomas Gleixner <[email protected]> wrote:
> On Sat, 2005-11-12 at 15:48 +0100, Ingo Molnar wrote:
> > doesnt apply. Also, the set_type line has whitespace damage.
> >
> > Ingo
>
> I have integrated the initial patch from Tom Rini into the arm generic
> irq patch set.
this ptach too had whitespace damage (spaces instead of tabs) - merged
it by hand.
Ingo