2005-12-08 23:39:47

by Knut Petersen

[permalink] [raw]
Subject: [PATCH 1/1 2.6.15-rc4-git1] Fix switching to KD_TEXT

Every framebuffer driver relies on the assumption that the set_par()
function
of the driver is called before drawing functions and other functions
dependent
on the hardware state are executed.

This assumption is false in two cases, and one is a genuine linux
bug:

1: Whenever you switch from X to a framebuffer console for the very
first time, there is a chance that a broken X system has _not_ set
the mode to KD_GRAPHICS, thus the vt and framebuffer code
executes a screen redraw and several other functions before a
set_par() is executed. This is believed to be not a bug of linux
but a bug of X/xdm.

2: Whenever a switch from X to a framebuffer console occures,
the pan_display() function of the driver is called once before
the set_par() function of the driver is called. Code path:
complete_change_console -> redraw_screen -> fbcon_switch ->
bit_update_start-> fb_pan_display -> xyz_pan_display.
This is clearly a bug of linux.

Although our primary goal must be to fix linux bugs and not to work
around bugs of X, the patch fixes both of the cases.

The advantage and correctness of this patch should be obvious. Yes, it
does add a possibly slow call to the fb_set_par() function, but at this
point it is necessary.

Signed-off-by: Knut Petersen <[email protected]>


diff -uprN -X linux/Documentation/dontdiff -x '*.bak' -x '*.ctx' linuxorig/drivers/video/console/fbcon.c linux/drivers/video/console/fbcon.c
--- linuxorig/drivers/video/console/fbcon.c 2005-12-02 12:18:04.000000000 +0100
+++ linux/drivers/video/console/fbcon.c 2005-12-06 09:06:56.000000000 +0100
@@ -2103,10 +2103,11 @@ static int fbcon_switch(struct vc_data *
fb_set_var(info, &var);
ops->var = info->var;

- if (old_info != NULL && old_info != info) {
- if (info->fbops->fb_set_par)
- info->fbops->fb_set_par(info);
+ if (old_info != NULL && old_info != info)
fbcon_del_cursor_timer(old_info);
+
+ if (info->fbops->fb_set_par) {
+ info->fbops->fb_set_par(info);
fbcon_add_cursor_timer(info);
}



2005-12-09 00:24:20

by Antonino A. Daplas

[permalink] [raw]
Subject: Re: [PATCH 1/1 2.6.15-rc4-git1] Fix switching to KD_TEXT

Knut Petersen wrote:
> Every framebuffer driver relies on the assumption that the set_par()
> function
> of the driver is called before drawing functions and other functions
> dependent
> on the hardware state are executed.
>
> This assumption is false in two cases, and one is a genuine linux
> bug:
>
> 1: Whenever you switch from X to a framebuffer console for the very
> first time, there is a chance that a broken X system has _not_ set
> the mode to KD_GRAPHICS, thus the vt and framebuffer code
> executes a screen redraw and several other functions before a
> set_par() is executed. This is believed to be not a bug of linux
> but a bug of X/xdm.
>
> 2: Whenever a switch from X to a framebuffer console occures,
> the pan_display() function of the driver is called once before
> the set_par() function of the driver is called. Code path:
> complete_change_console -> redraw_screen -> fbcon_switch ->
> bit_update_start-> fb_pan_display -> xyz_pan_display.
> This is clearly a bug of linux.

This part, #2, can be easily fixed.

>
> Although our primary goal must be to fix linux bugs and not to work
> around bugs of X, the patch fixes both of the cases.
>
> The advantage and correctness of this patch should be obvious. Yes, it
> does add a possibly slow call to the fb_set_par() function, but at this
> point it is necessary.
>
> Signed-off-by: Knut Petersen <[email protected]>

Sorry, NAK for now. Unless other people agree that it is okay for them
to have an unconditional call to set_par() for every console switch. Note
that the set_par() in some drivers is terribly slow (several seconds at least).

Let's wait a few days, if nobody disagrees with you, so be it.

Tony

2005-12-09 13:15:01

by Knut Petersen

[permalink] [raw]
Subject: Re: [PATCH 1/1 2.6.15-rc4-git1] Fix switching to KD_TEXT

Hi Tony!

>Sorry, NAK for now. Unless other people agree that it is okay for them
>to have an unconditional call to set_par() for every console switch. Note
>that the set_par() in some drivers is terribly slow (several seconds at least).
>
>Let's wait a few days, if nobody disagrees with you, so be it.
>
>
>
Which hardware needs several seconds? I do run relatively slow hardware,
but a complete
set_par() needs less than 0.003 seconds with cyblafb.

If there really is hardware that needs _several_ seconds for _one_
set_par(), then we should
really be more carefull when to call that function.

Let?s have a look at a switch from the framebuffer console to X and back.

Kernel is a 2.6.15-rc4-git1 with my current cyblafb + your patches
needed for cyblafb
+ the patch we are talking about.

Framebuffer console is 1 with mode 1280x1024, X console is 7 and has
been set to 1024x768
before X was activated.

Now I do run "chvt 7;sleep 3;chvt 1" on the vt 1.

[ 972.360841] [<c0282331>] cyblafb_set_par+0x31/0xd80
[ 972.360898] [<c027bb38>] fb_set_var+0x1e8/0x210
[ 972.360925] [<c02742fc>] fbcon_switch+0x16c/0x690
[ 972.360951] [<c02cc645>] redraw_screen+0xe5/0x1c0
[ 972.360989] [<c02c811a>] complete_change_console+0x2a/0xd0
[ 972.361018] [<c02c8203>] change_console+0x43/0x90
[ 972.361043] [<c02ceebd>] console_callback+0xed/0x110
[ 972.361101] [<c0127e6a>] worker_thread+0x1ba/0x260
[ 972.361143] [<c012c115>] kthread+0x95/0xd0
[ 972.361171] [<c0100c15>] kernel_thread_helper+0x5/0x10
[ 972.361212] cyblafb: Switching to new mode: fbset -g 1024 768
1024 768 8 -t 15385 160 24 29 3 136 6
[ 972.363308] cyblafb: pixclock = 64.99 MHz, k/m/n 1 b 6e

[ 972.363916] [<c0282331>] cyblafb_set_par+0x31/0xd80
[ 972.363945] [<c0274759>] fbcon_switch+0x5c9/0x690
[ 972.363969] [<c02cc645>] redraw_screen+0xe5/0x1c0
[ 972.363996] [<c02c811a>] complete_change_console+0x2a/0xd0
[ 972.364023] [<c02c8203>] change_console+0x43/0x90
[ 972.364047] [<c02ceebd>] console_callback+0xed/0x110
[ 972.364093] [<c0127e6a>] worker_thread+0x1ba/0x260
[ 972.364121] [<c012c115>] kthread+0x95/0xd0
[ 972.364143] [<c0100c15>] kernel_thread_helper+0x5/0x10
[ 972.364181] cyblafb: Switching to new mode: fbset -g 1024 768
1024 768 8 -t 15385 160 24 29 3 136 6
[ 972.366271] cyblafb: pixclock = 64.99 MHz, k/m/n 1 b 6e
[ 972.366325] cyblafb: Switching to KD_GRAPHICS

Not so nice. Now let?s have a look at the log entries caused switching
back to
the framebuffer console:

This call to set_par() is the result of my patch:

[ 975.751407] [<c0282331>] cyblafb_set_par+0x31/0xd80
[ 975.751437] [<c027bb38>] fb_set_var+0x1e8/0x210
[ 975.751462] [<c02742fc>] fbcon_switch+0x16c/0x690
[ 975.751486] [<c02cc645>] redraw_screen+0xe5/0x1c0
[ 975.751513] [<c02c811a>] complete_change_console+0x2a/0xd0
[ 975.751540] [<c02c765d>] vt_ioctl+0x103d/0x19b0
[ 975.751564] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
[ 975.751587] [<c016e92a>] do_ioctl+0x5a/0x90
[ 975.751613] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
[ 975.751640] [<c016eca5>] sys_ioctl+0x45/0x70
[ 975.751666] [<c01029a9>] syscall_call+0x7/0xb
[ 975.751702] cyblafb: Switching to new mode: fbset -g 1280 1024
2048 4096 8 -t 7407 232 16 39 0 160 3
[ 975.753795] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a

Without that prior set_par() that?s the point where the enhanced cyblafb
would
have serious problems:

[ 975.753839] cyblafb_pan_display: entry
[ 975.753853] [<c0281f7c>] cyblafb_pan_display+0x9c/0xb0
[ 975.753883] [<c027b911>] fb_pan_display+0x61/0xa0
[ 975.753925] [<c027ba4f>] fb_set_var+0xff/0x210
[ 975.753949] [<c02742fc>] fbcon_switch+0x16c/0x690
[ 975.753973] [<c02cc645>] redraw_screen+0xe5/0x1c0
[ 975.754000] [<c02c811a>] complete_change_console+0x2a/0xd0
[ 975.754027] [<c02c765d>] vt_ioctl+0x103d/0x19b0
[ 975.754051] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
[ 975.754074] [<c016e92a>] do_ioctl+0x5a/0x90
[ 975.754100] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
[ 975.754127] [<c016eca5>] sys_ioctl+0x45/0x70
[ 975.754153] [<c01029a9>] syscall_call+0x7/0xb

Again a call to set_par:

[ 975.754744] [<c0282331>] cyblafb_set_par+0x31/0xd80
[ 975.754773] [<c0274759>] fbcon_switch+0x5c9/0x690
[ 975.754796] [<c02cc645>] redraw_screen+0xe5/0x1c0
[ 975.754823] [<c02c811a>] complete_change_console+0x2a/0xd0
[ 975.754850] [<c02c765d>] vt_ioctl+0x103d/0x19b0
[ 975.754875] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
[ 975.754917] [<c016e92a>] do_ioctl+0x5a/0x90
[ 975.754943] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
[ 975.754970] [<c016eca5>] sys_ioctl+0x45/0x70
[ 975.754996] [<c01029a9>] syscall_call+0x7/0xb
[ 975.755032] cyblafb: Switching to new mode: fbset -g 1280 1024
2048 4096 8 -t 7407 232 16 39 0 160 3
[ 975.757123] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a

Now the save_state() function is called:

[ 975.757745] cyblafb: Switching to KD_TEXT

and again a call to set_par():

[ 975.757759] [<c0282331>] cyblafb_set_par+0x31/0xd80
[ 975.757789] [<c027bb38>] fb_set_var+0x1e8/0x210
[ 975.757813] [<c027498a>] fbcon_blank+0x11a/0x1b0
[ 975.757837] [<c02cff17>] do_unblank_screen+0x67/0x120
[ 975.757869] [<c02c8130>] complete_change_console+0x40/0xd0
[ 975.757955] [<c02c765d>] vt_ioctl+0x103d/0x19b0
[ 975.757979] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
[ 975.758002] [<c016e92a>] do_ioctl+0x5a/0x90
[ 975.758029] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
[ 975.758055] [<c016eca5>] sys_ioctl+0x45/0x70
[ 975.758081] [<c01029a9>] syscall_call+0x7/0xb
[ 975.758117] cyblafb: Switching to new mode: fbset -g 1280 1024
2048 4096 8 -t 7407 232 16 39 0 160 3
[ 975.760205] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a

And now, the be really shure, again, a call to set_par():

[ 975.760827] [<c0282331>] cyblafb_set_par+0x31/0xd80
[ 975.760856] [<c0274759>] fbcon_switch+0x5c9/0x690
[ 975.760880] [<c02cc645>] redraw_screen+0xe5/0x1c0
[ 975.760923] [<c02749e6>] fbcon_blank+0x176/0x1b0
[ 975.760947] [<c02cff17>] do_unblank_screen+0x67/0x120
[ 975.760976] [<c02c8130>] complete_change_console+0x40/0xd0
[ 975.761002] [<c02c765d>] vt_ioctl+0x103d/0x19b0
[ 975.761027] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
[ 975.761050] [<c016e92a>] do_ioctl+0x5a/0x90
[ 975.761076] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
[ 975.761102] [<c016eca5>] sys_ioctl+0x45/0x70
[ 975.761129] [<c01029a9>] syscall_call+0x7/0xb
[ 975.761164] cyblafb: Switching to new mode: fbset -g 1280 1024
2048 4096 8 -t 7407 232 16 39 0 160 3
[ 975.763280] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a

First of all: set_par is executed too often. With and without my patch.

If we would know that vt x is nothing but the vt used for X, we could
introduce a policy
to completely ignore all framebuffer operations for that console. That
also would result
in a much nicer look of the modeswitch. Do we need a new kernel
parameter or should
this be implemented by detected which vt is switched to KD_GRAPHICS?

Switching from X to the console could be optimized a lot, I?m shure that
you do agree.
We do need _one_ call to set_par() etc, but this must be at the right
place. And the right
place is somewhere before any other driver operation is called, with the
exception of
check_var() and init functions obviously.

Think about your NAK carefully. I might submit a patch to skeletonfb.c
that inserts
a warning at all places that might be unexpectedly called with a
hardware state different
to that set by set_par(). ;-))))

And please don?t argue that X or certain releases are broken. That is
true, but ordinary
users will use those broken versions for years.

cu,
Knut

2005-12-09 14:14:09

by Ville Syrjälä

[permalink] [raw]
Subject: Re: [Linux-fbdev-devel] Re: [PATCH 1/1 2.6.15-rc4-git1] Fix switching to KD_TEXT

On Fri, Dec 09, 2005 at 12:53:27PM +0100, Knut Petersen wrote:
> And please don?t argue that X or certain releases are broken. That is
> true, but ordinary
> users will use those broken versions for years.

Then they should just keep using vgacon.

However if you're really going to add more uneccessary set_par() calls
please make them configurable (eg. CONFIG_BROKEN_X). I'll go crazy if my
CRT is going to start resyncing on every vt switch.

--
Ville Syrj?l?
[email protected]
http://www.sci.fi/~syrjala/

2005-12-09 14:33:30

by Antonino A. Daplas

[permalink] [raw]
Subject: Re: [PATCH 1/1 2.6.15-rc4-git1] Fix switching to KD_TEXT

Knut Petersen wrote:
> Hi Tony!
>
>> Sorry, NAK for now. Unless other people agree that it is okay for them
>> to have an unconditional call to set_par() for every console switch. Note
>> that the set_par() in some drivers is terribly slow (several seconds
>> at least).
>>
>> Let's wait a few days, if nobody disagrees with you, so be it.
>>
>>
>>
> Which hardware needs several seconds?

savagefb does it in 3 seconds. I do remember a few nvidia cards that takes
longer. i810fb is okay, it's also in the millisecond range.

I do run relatively slow hardware,
> but a complete
> set_par() needs less than 0.003 seconds with cyblafb.

Good for you.

>
> If there really is hardware that needs _several_ seconds for _one_
> set_par(), then we should
> really be more carefull when to call that function.

People accept that when switching from X to console and vice versa, it
will be slow. It's when switching from a text console to another that
needs to be very fast. Inserting a set_par that can take a few to several
seconds will eventually become frustrating for people who predominantly
work in console mode.

>
> Let?s have a look at a switch from the framebuffer console to X and back.
>
> Kernel is a 2.6.15-rc4-git1 with my current cyblafb + your patches
> needed for cyblafb
> + the patch we are talking about.
>
> Framebuffer console is 1 with mode 1280x1024, X console is 7 and has
> been set to 1024x768
> before X was activated.
>
> Now I do run "chvt 7;sleep 3;chvt 1" on the vt 1.
>
> [ 972.360841] [<c0282331>] cyblafb_set_par+0x31/0xd80
> [ 972.360898] [<c027bb38>] fb_set_var+0x1e8/0x210
> [ 972.360925] [<c02742fc>] fbcon_switch+0x16c/0x690
> [ 972.360951] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 972.360989] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 972.361018] [<c02c8203>] change_console+0x43/0x90
> [ 972.361043] [<c02ceebd>] console_callback+0xed/0x110
> [ 972.361101] [<c0127e6a>] worker_thread+0x1ba/0x260
> [ 972.361143] [<c012c115>] kthread+0x95/0xd0
> [ 972.361171] [<c0100c15>] kernel_thread_helper+0x5/0x10
> [ 972.361212] cyblafb: Switching to new mode: fbset -g 1024 768 1024
> 768 8 -t 15385 160 24 29 3 136 6
> [ 972.363308] cyblafb: pixclock = 64.99 MHz, k/m/n 1 b 6e
>
> [ 972.363916] [<c0282331>] cyblafb_set_par+0x31/0xd80
> [ 972.363945] [<c0274759>] fbcon_switch+0x5c9/0x690
> [ 972.363969] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 972.363996] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 972.364023] [<c02c8203>] change_console+0x43/0x90
> [ 972.364047] [<c02ceebd>] console_callback+0xed/0x110
> [ 972.364093] [<c0127e6a>] worker_thread+0x1ba/0x260
> [ 972.364121] [<c012c115>] kthread+0x95/0xd0
> [ 972.364143] [<c0100c15>] kernel_thread_helper+0x5/0x10
> [ 972.364181] cyblafb: Switching to new mode: fbset -g 1024 768 1024
> 768 8 -t 15385 160 24 29 3 136 6
> [ 972.366271] cyblafb: pixclock = 64.99 MHz, k/m/n 1 b 6e
> [ 972.366325] cyblafb: Switching to KD_GRAPHICS
>
> Not so nice. Now let?s have a look at the log entries caused switching
> back to
> the framebuffer console:
>
> This call to set_par() is the result of my patch:
>
> [ 975.751407] [<c0282331>] cyblafb_set_par+0x31/0xd80
> [ 975.751437] [<c027bb38>] fb_set_var+0x1e8/0x210
> [ 975.751462] [<c02742fc>] fbcon_switch+0x16c/0x690
> [ 975.751486] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 975.751513] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 975.751540] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.751564] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.751587] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.751613] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.751640] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.751666] [<c01029a9>] syscall_call+0x7/0xb
> [ 975.751702] cyblafb: Switching to new mode: fbset -g 1280 1024
> 2048 4096 8 -t 7407 232 16 39 0 160 3
> [ 975.753795] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a
>
> Without that prior set_par() that?s the point where the enhanced cyblafb
> would
> have serious problems:

As I've mentioned above, this can be easily fixed.

>
> [ 975.753839] cyblafb_pan_display: entry
> [ 975.753853] [<c0281f7c>] cyblafb_pan_display+0x9c/0xb0
> [ 975.753883] [<c027b911>] fb_pan_display+0x61/0xa0
> [ 975.753925] [<c027ba4f>] fb_set_var+0xff/0x210
> [ 975.753949] [<c02742fc>] fbcon_switch+0x16c/0x690
> [ 975.753973] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 975.754000] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 975.754027] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.754051] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.754074] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.754100] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.754127] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.754153] [<c01029a9>] syscall_call+0x7/0xb
>
> Again a call to set_par:
>
> [ 975.754744] [<c0282331>] cyblafb_set_par+0x31/0xd80
> [ 975.754773] [<c0274759>] fbcon_switch+0x5c9/0x690
> [ 975.754796] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 975.754823] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 975.754850] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.754875] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.754917] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.754943] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.754970] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.754996] [<c01029a9>] syscall_call+0x7/0xb
> [ 975.755032] cyblafb: Switching to new mode: fbset -g 1280 1024
> 2048 4096 8 -t 7407 232 16 39 0 160 3
> [ 975.757123] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a
>
> Now the save_state() function is called:
>
> [ 975.757745] cyblafb: Switching to KD_TEXT
>
> and again a call to set_par():
>
> [ 975.757759] [<c0282331>] cyblafb_set_par+0x31/0xd80
> [ 975.757789] [<c027bb38>] fb_set_var+0x1e8/0x210
> [ 975.757813] [<c027498a>] fbcon_blank+0x11a/0x1b0
> [ 975.757837] [<c02cff17>] do_unblank_screen+0x67/0x120
> [ 975.757869] [<c02c8130>] complete_change_console+0x40/0xd0
> [ 975.757955] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.757979] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.758002] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.758029] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.758055] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.758081] [<c01029a9>] syscall_call+0x7/0xb
> [ 975.758117] cyblafb: Switching to new mode: fbset -g 1280 1024
> 2048 4096 8 -t 7407 232 16 39 0 160 3
> [ 975.760205] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a
>
> And now, the be really shure, again, a call to set_par():
>
> [ 975.760827] [<c0282331>] cyblafb_set_par+0x31/0xd80
> [ 975.760856] [<c0274759>] fbcon_switch+0x5c9/0x690
> [ 975.760880] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 975.760923] [<c02749e6>] fbcon_blank+0x176/0x1b0
> [ 975.760947] [<c02cff17>] do_unblank_screen+0x67/0x120
> [ 975.760976] [<c02c8130>] complete_change_console+0x40/0xd0
> [ 975.761002] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.761027] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.761050] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.761076] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.761102] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.761129] [<c01029a9>] syscall_call+0x7/0xb
> [ 975.761164] cyblafb: Switching to new mode: fbset -g 1280 1024
> 2048 4096 8 -t 7407 232 16 39 0 160 3
> [ 975.763280] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a
>
> First of all: set_par is executed too often. With and without my patch.
>
> If we would know that vt x is nothing but the vt used for X, we could
> introduce a policy
> to completely ignore all framebuffer operations for that console. That
> also would result
> in a much nicer look of the modeswitch. Do we need a new kernel
> parameter or should
> this be implemented by detected which vt is switched to KD_GRAPHICS?

I've tried this before, it is ugly.

>
> Switching from X to the console could be optimized a lot, I?m shure that
> you do agree.
> We do need _one_ call to set_par() etc, but this must be at the right
> place. And the right
> place is somewhere before any other driver operation is called, with the
> exception of
> check_var() and init functions obviously.

The problem is that the console code has so many pathways that it is
difficult to find the correct moment to call a set_par. Especially since
there are so many cases where it's illegal for the console to write to
the framebuffer. Think KD_GRAPHICS, hardware/software suspend, hardware
initialization, etc. Think also that the hardware can be change by
the kernel (via stty) and by the user (via fbset, etc).

Yes, we can optimize the code pathways so we minimize calls to set_par
and set_var, but remember that just a few kernel versions ago, fbcon/
fbdev was plagued with bugs, so bug fixing was the priority, not
code optimization. Nowadays, core fbdev and fbcon looks pretty stable so
we can redirect our effort towards this goal.

>
> Think about your NAK carefully. I might submit a patch to skeletonfb.c
> that inserts
> a warning at all places that might be unexpectedly called with a
> hardware state different
> to that set by set_par(). ;-))))

Go ahead. Only pan_display, I believe, currently has this problem. And
again, the fix is simple.

>
> And please don?t argue that X or certain releases are broken. That is
> true, but ordinary
> users will use those broken versions for years.

I'm not arguing that. However, we can always work around this buggy
implementation. For example, one can do an

echo 1 > /sys/class/graphics/fb0/state

before kdm (the buggy one that forgets to set KD_GRAPHICS) is called.

Tony

2005-12-09 16:38:23

by Antonino A. Daplas

[permalink] [raw]
Subject: Re: [PATCH 1/1 2.6.15-rc4-git1] Fix switching to KD_TEXT

Knut Petersen wrote:

Had time to look at your tracing closely...

>
> Framebuffer console is 1 with mode 1280x1024, X console is 7 and has
> been set to 1024x768
> before X was activated.
>
> Now I do run "chvt 7;sleep 3;chvt 1" on the vt 1.
>
> [ 972.360841] [<c0282331>] cyblafb_set_par+0x31/0xd80

The set_par call should not happen if the var of vt7 and vt1 are
the same.

> [ 972.360898] [<c027bb38>] fb_set_var+0x1e8/0x210
> [ 972.360925] [<c02742fc>] fbcon_switch+0x16c/0x690
> [ 972.360951] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 972.360989] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 972.361018] [<c02c8203>] change_console+0x43/0x90
> [ 972.361043] [<c02ceebd>] console_callback+0xed/0x110
> [ 972.361101] [<c0127e6a>] worker_thread+0x1ba/0x260
> [ 972.361143] [<c012c115>] kthread+0x95/0xd0
> [ 972.361171] [<c0100c15>] kernel_thread_helper+0x5/0x10
> [ 972.361212] cyblafb: Switching to new mode: fbset -g 1024 768 1024
> 768 8 -t 15385 160 24 29 3 136 6
> [ 972.363308] cyblafb: pixclock = 64.99 MHz, k/m/n 1 b 6e
>
> [ 972.363916] [<c0282331>] cyblafb_set_par+0x31/0xd80

Okay, this particular set_par() will only be called if the info
mapped to vt1 and info mapped to vt7 are different. Which means
you have multiple fbdevs loaded in your system.

The other reason, of course, is you have a patched fbcon_switch (yours).

> [ 972.363945] [<c0274759>] fbcon_switch+0x5c9/0x690
> [ 972.363969] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 972.363996] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 972.364023] [<c02c8203>] change_console+0x43/0x90
> [ 972.364047] [<c02ceebd>] console_callback+0xed/0x110
> [ 972.364093] [<c0127e6a>] worker_thread+0x1ba/0x260
> [ 972.364121] [<c012c115>] kthread+0x95/0xd0
> [ 972.364143] [<c0100c15>] kernel_thread_helper+0x5/0x10
> [ 972.364181] cyblafb: Switching to new mode: fbset -g 1024 768 1024
> 768 8 -t 15385 160 24 29 3 136 6
> [ 972.366271] cyblafb: pixclock = 64.99 MHz, k/m/n 1 b 6e
> [ 972.366325] cyblafb: Switching to KD_GRAPHICS
>
> Not so nice. Now let?s have a look at the log entries caused switching
> back to
> the framebuffer console:
>
> This call to set_par() is the result of my patch:
>
> [ 975.751407] [<c0282331>] cyblafb_set_par+0x31/0xd80
> [ 975.751437] [<c027bb38>] fb_set_var+0x1e8/0x210
> [ 975.751462] [<c02742fc>] fbcon_switch+0x16c/0x690
> [ 975.751486] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 975.751513] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 975.751540] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.751564] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.751587] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.751613] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.751640] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.751666] [<c01029a9>] syscall_call+0x7/0xb
> [ 975.751702] cyblafb: Switching to new mode: fbset -g 1280 1024
> 2048 4096 8 -t 7407 232 16 39 0 160 3
> [ 975.753795] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a
>
> Without that prior set_par() that?s the point where the enhanced cyblafb
> would
> have serious problems:
>
> [ 975.753839] cyblafb_pan_display: entry
> [ 975.753853] [<c0281f7c>] cyblafb_pan_display+0x9c/0xb0
> [ 975.753883] [<c027b911>] fb_pan_display+0x61/0xa0
> [ 975.753925] [<c027ba4f>] fb_set_var+0xff/0x210
> [ 975.753949] [<c02742fc>] fbcon_switch+0x16c/0x690
> [ 975.753973] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 975.754000] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 975.754027] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.754051] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.754074] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.754100] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.754127] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.754153] [<c01029a9>] syscall_call+0x7/0xb

Yes, this is a problem. Should be easily fixed.

>
> Again a call to set_par:
>
> [ 975.754744] [<c0282331>] cyblafb_set_par+0x31/0xd80

This either came from your patch, or you have multiple fbdevs.

> [ 975.754773] [<c0274759>] fbcon_switch+0x5c9/0x690
> [ 975.754796] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 975.754823] [<c02c811a>] complete_change_console+0x2a/0xd0
> [ 975.754850] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.754875] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.754917] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.754943] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.754970] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.754996] [<c01029a9>] syscall_call+0x7/0xb
> [ 975.755032] cyblafb: Switching to new mode: fbset -g 1280 1024
> 2048 4096 8 -t 7407 232 16 39 0 160 3
> [ 975.757123] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a
>
> Now the save_state() function is called:
>
> [ 975.757745] cyblafb: Switching to KD_TEXT
>
> and again a call to set_par():
>
> [ 975.757759] [<c0282331>] cyblafb_set_par+0x31/0xd80

This set_par is the one that is needed. This is the point where
the vt is entering KD_TEXT mode fro KD_GRAPHICS.

> [ 975.757789] [<c027bb38>] fb_set_var+0x1e8/0x210
> [ 975.757813] [<c027498a>] fbcon_blank+0x11a/0x1b0
> [ 975.757837] [<c02cff17>] do_unblank_screen+0x67/0x120
> [ 975.757869] [<c02c8130>] complete_change_console+0x40/0xd0
> [ 975.757955] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.757979] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.758002] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.758029] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.758055] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.758081] [<c01029a9>] syscall_call+0x7/0xb
> [ 975.758117] cyblafb: Switching to new mode: fbset -g 1280 1024
> 2048 4096 8 -t 7407 232 16 39 0 160 3
> [ 975.760205] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a
>
> And now, the be really shure, again, a call to set_par():
>
> [ 975.760827] [<c0282331>] cyblafb_set_par+0x31/0xd80

Again, this set_par() is either from your patch, or you have multiple
fbdev's.

> [ 975.760856] [<c0274759>] fbcon_switch+0x5c9/0x690
> [ 975.760880] [<c02cc645>] redraw_screen+0xe5/0x1c0
> [ 975.760923] [<c02749e6>] fbcon_blank+0x176/0x1b0
> [ 975.760947] [<c02cff17>] do_unblank_screen+0x67/0x120
> [ 975.760976] [<c02c8130>] complete_change_console+0x40/0xd0
> [ 975.761002] [<c02c765d>] vt_ioctl+0x103d/0x19b0
> [ 975.761027] [<c02c17eb>] tty_ioctl+0x18b/0x3d0
> [ 975.761050] [<c016e92a>] do_ioctl+0x5a/0x90
> [ 975.761076] [<c016eaeb>] vfs_ioctl+0x5b/0x1d0
> [ 975.761102] [<c016eca5>] sys_ioctl+0x45/0x70
> [ 975.761129] [<c01029a9>] syscall_call+0x7/0xb
> [ 975.761164] cyblafb: Switching to new mode: fbset -g 1280 1024
> 2048 4096 8 -t 7407 232 16 39 0 160 3
> [ 975.763280] cyblafb: pixclock = 135.00 MHz, k/m/n 0 5 3a
>
> First of all: set_par is executed too often. With and without my patch.

In the final analysis, the set_par is actually called only once on an
X to console switch in a typical system. The multiple set_par() present
in your trace is due to:

a. different per-display var
b. multiple fbdevs
c. your patch.

In summary. For a typical system (single fbdev, all vt's with the
same var) switching from X to vt should be like this, with only a
single, necessary call to set_par().

(The set_par call after fbcon_blank is only present when switching
from KD_GRAPHICS. This will be absent on a KD_TEXT to KD_TEXT switch).

fbcon_blank()
set_par()
fbcon_switch()
fb_set_var()

If you have different vars, the sequence will be like this:

fbcon_blank()
set_par()
fbcon_switch()
fb_set_var()->set_par()

If you have multiple fbdev's, same var:

fbcon_blank()
set_par()
fbcon_switch()
fb_set_var()
set_par()

And if you have multiple fbdev's, different var's:

fbcon_blank()
set_par()
fbcon_switch()
fb_set_var()->set_par()
set_par()

So the unnecessary (arguable) set_par calls are only present if
you have multiple fbdevs/multi-head system.

Tony

2005-12-10 06:27:31

by Knut Petersen

[permalink] [raw]
Subject: Re: [PATCH 1/1 2.6.15-rc4-git1] Fix switching to KD_TEXT

Please do forget about that patch I sent to you some days ago. An
enhanced version
will follow soon.

cu,
knut

Knut Petersen schrieb:

> Every framebuffer driver relies on the assumption that the set_par()
> function
> of the driver is called before drawing functions and other functions
> dependent
> on the hardware state are executed.
>
> This assumption is false in two cases, and one is a genuine linux
> bug:
>
> 1: Whenever you switch from X to a framebuffer console for the very
> first time, there is a chance that a broken X system has _not_ set
> the mode to KD_GRAPHICS, thus the vt and framebuffer code
> executes a screen redraw and several other functions before a
> set_par() is executed. This is believed to be not a bug of linux
> but a bug of X/xdm.
>
> 2: Whenever a switch from X to a framebuffer console occures,
> the pan_display() function of the driver is called once before
> the set_par() function of the driver is called. Code path:
> complete_change_console -> redraw_screen -> fbcon_switch ->
> bit_update_start-> fb_pan_display -> xyz_pan_display.
> This is clearly a bug of linux.
>
> Although our primary goal must be to fix linux bugs and not to work
> around bugs of X, the patch fixes both of the cases.
>
> The advantage and correctness of this patch should be obvious. Yes, it
> does add a possibly slow call to the fb_set_par() function, but at this
> point it is necessary.
>
> Signed-off-by: Knut Petersen <[email protected]>
>
>
> diff -uprN -X linux/Documentation/dontdiff -x '*.bak' -x '*.ctx'
> linuxorig/drivers/video/console/fbcon.c
> linux/drivers/video/console/fbcon.c
> --- linuxorig/drivers/video/console/fbcon.c 2005-12-02
> 12:18:04.000000000 +0100
> +++ linux/drivers/video/console/fbcon.c 2005-12-06
> 09:06:56.000000000 +0100
> @@ -2103,10 +2103,11 @@ static int fbcon_switch(struct vc_data *
> fb_set_var(info, &var);
> ops->var = info->var;
>
> - if (old_info != NULL && old_info != info) {
> - if (info->fbops->fb_set_par)
> - info->fbops->fb_set_par(info);
> + if (old_info != NULL && old_info != info)
> fbcon_del_cursor_timer(old_info);
> +
> + if (info->fbops->fb_set_par) {
> + info->fbops->fb_set_par(info);
> fbcon_add_cursor_timer(info);
> }
>
>
>