Hello,
I tried to compile kernel 2.6.14.4 on my sparc and I got this:
drivers/built-in.o(.init.text+0x1184): In function `rtc_init':
: undefined reference to `ebus_chain'
drivers/built-in.o(.init.text+0x1188): In function `rtc_init':
: undefined reference to `ebus_chain'
drivers/built-in.o(.init.text+0x1190): In function `rtc_init':
: undefined reference to `isa_chain'
drivers/built-in.o(.init.text+0x11d4): In function `rtc_init':
: undefined reference to `isa_chain'
drivers/built-in.o(.init.text+0x11d8): In function `rtc_init':
: undefined reference to `isa_chain'
make: *** [.tmp_vmlinux1] Error 1
--
Gerhard Mack
[email protected]
<>< As a computer I find your faith in technology amusing.
On Fri, Dec 16, 2005 at 08:33:48AM -0500, Gerhard Mack wrote:
> Hello,
>
> I tried to compile kernel 2.6.14.4 on my sparc and I got this:
>
> drivers/built-in.o(.init.text+0x1184): In function `rtc_init':
> : undefined reference to `ebus_chain'
> drivers/built-in.o(.init.text+0x1188): In function `rtc_init':
> : undefined reference to `ebus_chain'
> drivers/built-in.o(.init.text+0x1190): In function `rtc_init':
> : undefined reference to `isa_chain'
> drivers/built-in.o(.init.text+0x11d4): In function `rtc_init':
> : undefined reference to `isa_chain'
> drivers/built-in.o(.init.text+0x11d8): In function `rtc_init':
> : undefined reference to `isa_chain'
> make: *** [.tmp_vmlinux1] Error 1
Please send your .config .
> Gerhard Mack
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
I always forget that for some reason.
If I disable CONFIG_RTC it compiles cleanly.
Gerhard
On Fri, 16 Dec 2005, Adrian Bunk wrote:
> Date: Fri, 16 Dec 2005 23:21:54 +0100
> From: Adrian Bunk <[email protected]>
> To: Gerhard Mack <[email protected]>
> Cc: [email protected], [email protected]
> Subject: Re: linux 2.6.14.4 sparc compile problem
>
> On Fri, Dec 16, 2005 at 08:33:48AM -0500, Gerhard Mack wrote:
> > Hello,
> >
> > I tried to compile kernel 2.6.14.4 on my sparc and I got this:
> >
> > drivers/built-in.o(.init.text+0x1184): In function `rtc_init':
> > : undefined reference to `ebus_chain'
> > drivers/built-in.o(.init.text+0x1188): In function `rtc_init':
> > : undefined reference to `ebus_chain'
> > drivers/built-in.o(.init.text+0x1190): In function `rtc_init':
> > : undefined reference to `isa_chain'
> > drivers/built-in.o(.init.text+0x11d4): In function `rtc_init':
> > : undefined reference to `isa_chain'
> > drivers/built-in.o(.init.text+0x11d8): In function `rtc_init':
> > : undefined reference to `isa_chain'
> > make: *** [.tmp_vmlinux1] Error 1
>
> Please send your .config .
>
> > Gerhard Mack
>
> cu
> Adrian
>
>
--
Gerhard Mack
[email protected]
<>< As a computer I find your faith in technology amusing.
On Fri, Dec 16, 2005 at 07:10:05PM -0500, Gerhard Mack wrote:
>
> I always forget that for some reason.
> If I disable CONFIG_RTC it compiles cleanly.
That's expected since this is the driver that breaks the build.
The patch below adds the dependency of CONFIG_RTC on CONFIG_PCI on the
sparc architecture.
> Gerhard
cu
Adrian
BTW: @sparc maintainers:
Is there any reason against introducing a SPARC Kconfig symbol
that is set on both the sparc and sparc64 architectures?
<-- snip -->
On sparc and sparc64, the rtc driver doesn't compile with PCI support
disabled.
Signed-off-by: Adrian Bunk <[email protected]>
--- linux-2.6.14.4/drivers/char/Kconfig.old 2005-12-17 15:03:06.000000000 +0100
+++ linux-2.6.14.4/drivers/char/Kconfig 2005-12-17 15:03:33.000000000 +0100
@@ -687,7 +687,7 @@
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !M68K
+ depends on !PPC32 && !PARISC && !IA64 && !M68K && (!(SPARC32 || SPARC64) || PCI)
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
From: Adrian Bunk <[email protected]>
Date: Sat, 17 Dec 2005 15:10:49 +0100
> On sparc and sparc64, the rtc driver doesn't compile with PCI support
> disabled.
Applied, thanks Adrian.
> BTW: @sparc maintainers:
> Is there any reason against introducing a SPARC Kconfig symbol
> that is set on both the sparc and sparc64 architectures?
That's a great idea, I thought we already did this in fact :)
On Mon, Dec 19, 2005 at 02:52:54PM -0800, David S. Miller wrote:
>...
> > BTW: @sparc maintainers:
> > Is there any reason against introducing a SPARC Kconfig symbol
> > that is set on both the sparc and sparc64 architectures?
>
> That's a great idea, I thought we already did this in fact :)
Patch below.
cu
Adrian
<-- snip -->
Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.
This symbol makes some dependencies more readable.
Except for all bugs this patch deliberately introduces ;-) it shouldn't
cause any visible change.
Signed-off-by: Adrian Bunk <[email protected]>
---
arch/sparc/Kconfig | 4 ++++
arch/sparc64/Kconfig | 4 ++++
drivers/char/Kconfig | 4 ++--
drivers/char/keyboard.c | 10 +++++-----
drivers/fc4/Kconfig | 8 ++++----
drivers/input/misc/Kconfig | 2 +-
drivers/input/serio/i8042.h | 2 +-
drivers/mtd/maps/Kconfig | 2 +-
drivers/serial/Kconfig | 10 +++++-----
drivers/video/Kconfig | 10 +++++-----
drivers/video/console/Kconfig | 20 ++++++++++----------
drivers/video/logo/Kconfig | 2 +-
fs/partitions/Kconfig | 2 +-
sound/sparc/Kconfig | 2 +-
14 files changed, 45 insertions(+), 37 deletions(-)
--- linux-git/arch/sparc/Kconfig.old 2005-12-23 01:59:27.000000000 +0100
+++ linux-git/arch/sparc/Kconfig 2005-12-23 01:59:45.000000000 +0100
@@ -55,6 +55,10 @@
depends on SMP
default "32"
+config SPARC
+ bool
+ default y
+
# Identify this as a Sparc32 build
config SPARC32
bool
--- linux-git/arch/sparc64/Kconfig.old 2005-12-23 01:59:55.000000000 +0100
+++ linux-git/arch/sparc64/Kconfig 2005-12-23 02:00:14.000000000 +0100
@@ -5,6 +5,10 @@
mainmenu "Linux/UltraSPARC Kernel Configuration"
+config SPARC
+ bool
+ default y
+
config SPARC64
bool
default y
--- linux-git/drivers/char/Kconfig.old 2005-12-23 02:02:05.000000000 +0100
+++ linux-git/drivers/char/Kconfig 2005-12-23 02:04:01.000000000 +0100
@@ -687,7 +687,7 @@
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !M68K && (!(SPARC32 || SPARC64) || PCI)
+ depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI)
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -735,7 +735,7 @@
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC32 && !SPARC64
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
--- linux-git/drivers/char/keyboard.c.old 2005-12-23 02:02:56.000000000 +0100
+++ linux-git/drivers/char/keyboard.c 2005-12-23 02:16:03.000000000 +0100
@@ -930,8 +930,8 @@
}
#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\
- defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC32) ||\
- defined(CONFIG_SPARC64) || defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
+ defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\
+ defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\
(defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC))
#define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\
@@ -958,7 +958,7 @@
extern int mac_hid_mouse_emulate_buttons(int, int, int);
#endif /* CONFIG_MAC_EMUMOUSEBTN */
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
static int sparc_l1_a_state = 0;
extern void sun_do_break(void);
#endif
@@ -1045,7 +1045,7 @@
if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT)
sysrq_alt = down;
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
if (keycode == KEY_STOP)
sparc_l1_a_state = down;
#endif
@@ -1072,7 +1072,7 @@
return;
}
#endif
-#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#ifdef CONFIG_SPARC
if (keycode == KEY_A && sparc_l1_a_state) {
sparc_l1_a_state = 0;
sun_do_break();
--- linux-git/drivers/fc4/Kconfig.old 2005-12-23 02:04:15.000000000 +0100
+++ linux-git/drivers/fc4/Kconfig 2005-12-23 02:04:40.000000000 +0100
@@ -26,7 +26,7 @@
config FC4_SOC
tristate "Sun SOC/Sbus"
- depends on FC4!=n && (SPARC32 || SPARC64)
+ depends on FC4!=n && SPARC
help
Serial Optical Channel is an interface card with one or two Fibre
Optic ports, each of which can be connected to a disk array. Note
@@ -38,7 +38,7 @@
config FC4_SOCAL
tristate "Sun SOC+ (aka SOCAL)"
- depends on FC4!=n && (SPARC32 || SPARC64)
+ depends on FC4!=n && SPARC
---help---
Serial Optical Channel Plus is an interface card with up to two
Fibre Optic ports. This card supports FC Arbitrated Loop (usually
@@ -62,7 +62,7 @@
be called pluto.
config SCSI_FCAL
- tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC32 || SPARC64
+ tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC
depends on FC4!=n && SCSI
help
This driver drives FC-AL disks connected through a Fibre Channel
@@ -75,7 +75,7 @@
config SCSI_FCAL
prompt "Generic FC-AL disk driver"
- depends on FC4!=n && SCSI && !SPARC32 && !SPARC64
+ depends on FC4!=n && SCSI && !SPARC
endmenu
--- linux-git/drivers/input/misc/Kconfig.old 2005-12-23 02:04:49.000000000 +0100
+++ linux-git/drivers/input/misc/Kconfig 2005-12-23 02:04:56.000000000 +0100
@@ -26,7 +26,7 @@
config INPUT_SPARCSPKR
tristate "SPARC Speaker support"
- depends on PCI && (SPARC32 || SPARC64)
+ depends on PCI && SPARC
help
Say Y here if you want the standard Speaker on Sparc PCI systems
to be used for bells and whistles.
--- linux-git/drivers/input/serio/i8042.h.old 2005-12-23 02:05:07.000000000 +0100
+++ linux-git/drivers/input/serio/i8042.h 2005-12-23 02:05:19.000000000 +0100
@@ -21,7 +21,7 @@
#include "i8042-ip22io.h"
#elif defined(CONFIG_PPC)
#include "i8042-ppcio.h"
-#elif defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64)
+#elif defined(CONFIG_SPARC)
#include "i8042-sparcio.h"
#elif defined(CONFIG_X86) || defined(CONFIG_IA64)
#include "i8042-x86ia64io.h"
--- linux-git/drivers/mtd/maps/Kconfig.old 2005-12-23 02:05:31.000000000 +0100
+++ linux-git/drivers/mtd/maps/Kconfig 2005-12-23 02:05:57.000000000 +0100
@@ -62,7 +62,7 @@
config MTD_SUN_UFLASH
tristate "Sun Microsystems userflash support"
- depends on (SPARC32 || SPARC64) && MTD_CFI
+ depends on SPARC && MTD_CFI
help
This provides a 'mapping' driver which supports the way in
which user-programmable flash chips are connected on various
--- linux-git/drivers/serial/Kconfig.old 2005-12-23 02:06:27.000000000 +0100
+++ linux-git/drivers/serial/Kconfig 2005-12-23 02:06:59.000000000 +0100
@@ -10,7 +10,7 @@
# The new 8250/16550 serial drivers
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
- depends on (BROKEN || !(SPARC64 || SPARC32))
+ depends on (BROKEN || !SPARC)
select SERIAL_CORE
---help---
This selects whether you want to include the driver for the standard
@@ -469,14 +469,14 @@
config SERIAL_SUNCORE
bool
- depends on SPARC32 || SPARC64
+ depends on SPARC
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
default y
config SERIAL_SUNZILOG
tristate "Sun Zilog8530 serial support"
- depends on SPARC32 || SPARC64
+ depends on SPARC
help
This driver supports the Zilog8530 serial ports found on many Sparc
systems. Say Y or M if you want to be able to these serial ports.
@@ -491,7 +491,7 @@
config SERIAL_SUNSU
tristate "Sun SU serial support"
- depends on (SPARC32 || SPARC64) && PCI
+ depends on SPARC && PCI
help
This driver supports the 8250 serial ports that run the keyboard and
mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
@@ -547,7 +547,7 @@
config SERIAL_SUNSAB
tristate "Sun Siemens SAB82532 serial support"
- depends on (SPARC32 || SPARC64) && PCI
+ depends on SPARC && PCI
help
This driver supports the Siemens SAB82532 DUSCC serial ports on newer
(PCI) UltraSPARC systems. Say Y or M if you want to be able to these
--- linux-git/drivers/video/Kconfig.old 2005-12-23 02:07:15.000000000 +0100
+++ linux-git/drivers/video/Kconfig 2005-12-23 02:07:56.000000000 +0100
@@ -536,13 +536,13 @@
config FB_SBUS
bool "SBUS and UPA framebuffers"
- depends on (FB = y) && (SPARC32 || SPARC64)
+ depends on (FB = y) && SPARC
help
Say Y if you want support for SBUS or UPA based frame buffer device.
config FB_BW2
bool "BWtwo support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -551,7 +551,7 @@
config FB_CG3
bool "CGthree support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -560,7 +560,7 @@
config FB_CG6
bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
@@ -1268,7 +1268,7 @@
config FB_PCI
bool "PCI framebuffers"
- depends on (FB = y) && PCI && (SPARC64 || SPARC32)
+ depends on (FB = y) && PCI && SPARC
config FB_IGA
bool "IGA 168x display support"
--- linux-git/drivers/video/console/Kconfig.old 2005-12-23 02:08:08.000000000 +0100
+++ linux-git/drivers/video/console/Kconfig 2005-12-23 02:18:30.000000000 +0100
@@ -6,7 +6,7 @@
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !ARCH_VERSATILE
default y
help
Saying Y here will allow you to use Linux in text mode through a
@@ -68,7 +68,7 @@
config PROM_CONSOLE
bool "PROM console"
- depends on SPARC32 || SPARC64
+ depends on SPARC
help
Say Y to build a console driver for Sun machines that uses the
terminal emulation built into their console PROMS.
@@ -136,7 +136,7 @@
config FONT_8x8
bool "VGA 8x8 font" if FONTS
depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
- default y if !SPARC32 && !SPARC64 && !FONTS
+ default y if !SPARC && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
provided by the text console 80x50 (and higher) modes).
@@ -150,7 +150,7 @@
config FONT_8x16
bool "VGA 8x16 font" if FONTS
depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
- default y if !SPARC32 && !SPARC64 && !FONTS
+ default y if !SPARC && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
provided by the VGA text console 80x25 mode.
@@ -160,7 +160,7 @@
config FONT_6x11
bool "Mac console 6x11 font (not supported by all drivers)" if FONTS
depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
- default y if !SPARC32 && !SPARC64 && !FONTS && MAC
+ default y if !SPARC && !FONTS && MAC
help
Small console font with Macintosh-style high-half glyphs. Some Mac
framebuffer drivers don't support this one at all.
@@ -176,7 +176,7 @@
config FONT_PEARL_8x8
bool "Pearl (old m68k) console 8x8 font" if FONTS
depends on FRAMEBUFFER_CONSOLE
- default y if !SPARC32 && !SPARC64 && !FONTS && AMIGA
+ default y if !SPARC && !FONTS && AMIGA
help
Small console font with PC-style control-character and high-half
glyphs.
@@ -184,24 +184,24 @@
config FONT_ACORN_8x8
bool "Acorn console 8x8 font" if FONTS
depends on FRAMEBUFFER_CONSOLE
- default y if !SPARC32 && !SPARC64 && !FONTS && ARM && ARCH_ACORN
+ default y if !SPARC && !FONTS && ARM && ARCH_ACORN
help
Small console font with PC-style control characters and high-half
glyphs.
config FONT_MINI_4x6
bool "Mini 4x6 font"
- depends on !SPARC32 && !SPARC64 && FONTS
+ depends on !SPARC && FONTS
config FONT_SUN8x16
bool "Sparc console 8x16 font"
- depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64)
+ depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC)
help
This is the high resolution console font for Sun machines. Say Y.
config FONT_SUN12x22
bool "Sparc console 12x22 font (not supported by all drivers)"
- depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64)
+ depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC)
help
This is the high resolution console font for Sun machines with very
big letters (like the letters used in the SPARC PROM). If the
--- linux-git/drivers/video/logo/Kconfig.old 2005-12-23 02:12:31.000000000 +0100
+++ linux-git/drivers/video/logo/Kconfig 2005-12-23 02:12:40.000000000 +0100
@@ -47,7 +47,7 @@
config LOGO_SUN_CLUT224
bool "224-color Sun Linux logo"
- depends on LOGO && (SPARC32 || SPARC64)
+ depends on LOGO && SPARC
default y
config LOGO_SUPERH_MONO
--- linux-git/fs/partitions/Kconfig.old 2005-12-23 02:12:50.000000000 +0100
+++ linux-git/fs/partitions/Kconfig 2005-12-23 02:13:00.000000000 +0100
@@ -203,7 +203,7 @@
config SUN_PARTITION
bool "Sun partition tables support" if PARTITION_ADVANCED
- default y if (SPARC32 || SPARC64 || SUN3 || SUN3X)
+ default y if (SPARC || SUN3 || SUN3X)
---help---
Like most systems, SunOS uses its own hard disk partition table
format, incompatible with all others. Saying Y here allows you to
--- linux-git/sound/sparc/Kconfig.old 2005-12-23 02:13:11.000000000 +0100
+++ linux-git/sound/sparc/Kconfig 2005-12-23 02:13:18.000000000 +0100
@@ -1,7 +1,7 @@
# ALSA Sparc drivers
menu "ALSA Sparc devices"
- depends on SND!=n && (SPARC32 || SPARC64)
+ depends on SND!=n && SPARC
config SND_SUN_AMD7930
tristate "Sun AMD7930"
From: Adrian Bunk <[email protected]>
Date: Fri, 23 Dec 2005 03:15:26 +0100
> Introduce a Kconfig symbol SPARC that is defined on both the sparc and
> sparc64 architectures.
>
> This symbol makes some dependencies more readable.
>
> Except for all bugs this patch deliberately introduces ;-) it shouldn't
> cause any visible change.
>
>
> Signed-off-by: Adrian Bunk <[email protected]>
:-) Applied, thanks Adrian.