Allow the wbsd driver to use the new suspend/resume functions added to
the PnP layer.
Signed-off-by: Pierre Ossman <[email protected]>
---
drivers/mmc/wbsd.c | 106 ++++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 90 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 4f13bd2..60afc12 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -1980,37 +1980,53 @@ static void __devexit wbsd_pnp_remove(st
#ifdef CONFIG_PM
-static int wbsd_suspend(struct platform_device *dev, pm_message_t state)
+static int wbsd_suspend(struct wbsd_host *host, pm_message_t state)
+{
+ BUG_ON(host == NULL);
+
+ return mmc_suspend_host(host->mmc, state);
+}
+
+static int wbsd_resume(struct wbsd_host *host)
+{
+ BUG_ON(host == NULL);
+
+ wbsd_init_device(host);
+
+ return mmc_resume_host(host->mmc);
+}
+
+static int wbsd_platform_suspend(struct platform_device *dev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
struct wbsd_host *host;
int ret;
- if (!mmc)
+ if (mmc == NULL)
return 0;
- DBG("Suspending...\n");
-
- ret = mmc_suspend_host(mmc, state);
- if (!ret)
- return ret;
+ DBGF("Suspending...\n");
host = mmc_priv(mmc);
+ ret = wbsd_suspend(host, state);
+ if (ret)
+ return ret;
+
wbsd_chip_poweroff(host);
return 0;
}
-static int wbsd_resume(struct platform_device *dev)
+static int wbsd_platform_resume(struct platform_device *dev)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
struct wbsd_host *host;
- if (!mmc)
+ if (mmc == NULL)
return 0;
- DBG("Resuming...\n");
+ DBGF("Resuming...\n");
host = mmc_priv(mmc);
@@ -2021,15 +2037,70 @@ static int wbsd_resume(struct platform_d
*/
mdelay(5);
- wbsd_init_device(host);
+ return wbsd_resume(host);
+}
+
+#ifdef CONFIG_PNP
+
+static int wbsd_pnp_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+ struct mmc_host *mmc = dev_get_drvdata(&pnp_dev->dev);
+ struct wbsd_host *host;
+
+ if (mmc == NULL)
+ return 0;
+
+ DBGF("Suspending...\n");
+
+ host = mmc_priv(mmc);
- return mmc_resume_host(mmc);
+ return wbsd_suspend(host, state);
}
+static int wbsd_pnp_resume(struct pnp_dev *pnp_dev)
+{
+ struct mmc_host *mmc = dev_get_drvdata(&pnp_dev->dev);
+ struct wbsd_host *host;
+
+ if (mmc == NULL)
+ return 0;
+
+ DBGF("Resuming...\n");
+
+ host = mmc_priv(mmc);
+
+ /*
+ * See if chip needs to be configured.
+ */
+ if (host->config != 0)
+ {
+ if (!wbsd_chip_validate(host))
+ {
+ printk(KERN_WARNING DRIVER_NAME
+ ": PnP active but chip not configured! "
+ "You probably have a buggy BIOS. "
+ "Configuring chip manually.\n");
+ wbsd_chip_config(host);
+ }
+ }
+
+ /*
+ * Allow device to initialise itself properly.
+ */
+ mdelay(5);
+
+ return wbsd_resume(host);
+}
+
+#endif /* CONFIG_PNP */
+
#else /* CONFIG_PM */
-#define wbsd_suspend NULL
-#define wbsd_resume NULL
+#define wbsd_platform_suspend NULL
+#define wbsd_platform_resume NULL
+
+#define wbsd_pnp_suspend NULL
+#define wbsd_pnp_resume NULL
#endif /* CONFIG_PM */
@@ -2039,8 +2110,8 @@ static struct platform_driver wbsd_drive
.probe = wbsd_probe,
.remove = __devexit_p(wbsd_remove),
- .suspend = wbsd_suspend,
- .resume = wbsd_resume,
+ .suspend = wbsd_platform_suspend,
+ .resume = wbsd_platform_resume,
.driver = {
.name = DRIVER_NAME,
},
@@ -2053,6 +2124,9 @@ static struct pnp_driver wbsd_pnp_driver
.id_table = pnp_dev_table,
.probe = wbsd_pnp_probe,
.remove = __devexit_p(wbsd_pnp_remove),
+
+ .suspend = wbsd_pnp_suspend,
+ .resume = wbsd_pnp_resume,
};
#endif /* CONFIG_PNP */
On Sun, Jan 08, 2006 at 12:02:01AM +0100, Pierre Ossman wrote:
> Allow the wbsd driver to use the new suspend/resume functions added to
> the PnP layer.
Applied, thanks.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core