Hello,
This patch adds the Intel ICH8 DID to the i2c-i801.c and Kconfig files for I2C support. ?This patch was built against the 2.6.15 kernel. ?
If acceptable, please apply. ?Note: ?This patch depends on the previous 1/6 patch for pci_ids.h
Thanks,
Jason Gaston
Signed-off-by: ?Jason Gaston <[email protected]>
--- linux-2.6.15/drivers/i2c/busses/i2c-i801.c.orig 2006-01-02 19:21:10.000000000 -0800
+++ linux-2.6.15/drivers/i2c/busses/i2c-i801.c 2006-01-09 08:18:08.008292232 -0800
@@ -32,6 +32,7 @@
ICH6 266A
ICH7 27DA
ESB2 269B
+ ICH8 283E
This driver supports several versions of Intel's I/O Controller Hubs (ICH).
For SMBus support, they are similar to the PIIX4 and are part
of Intel's '810' and other chipsets.
@@ -531,6 +532,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
{ 0, }
};
--- linux-2.6.15/drivers/i2c/busses/Kconfig.orig 2006-01-02 19:21:10.000000000 -0800
+++ linux-2.6.15/drivers/i2c/busses/Kconfig 2006-01-09 08:18:08.009292080 -0800
@@ -124,6 +124,7 @@
ICH6
ICH7
ESB2
+ ICH8
This driver can also be built as a module. If so, the module
will be called i2c-i801.