Please CC me :shameful: as I'm not part of the list.
Please forgive if this has already been asked (I did look and couldn't
find the answer).
I have a fresh install of 2.6.15, patched with 2.6.15-git6, edited the
top-level make file and changed the ARCH ?= <blah> to ARCH = arm
I then issue the following commands
make ixp4xx_defconfig
make
and I get the following:
CHK include/linux/version.h
UPD include/linux/version.h
SPLIT include/linux/autoconf.h -> include/config/*
SYMLINK include/asm-arm/arch -> include/asm-arm/arch-ixp4xx
Generating include/asm-arm/mach-types.h
SYMLINK include/asm -> include/asm-arm
CC arch/arm/kernel/asm-offsets.s
cc1: error: invalid option `big-endian'
cc1: error: invalid option `apcs'
cc1: error: invalid option `no-sched-prolog'
cc1: error: invalid option `abi=apcs-gnu'
cc1: error: invalid option `tune=strongarm110'
cc1: error: bad value (armv4) for -march= switch
cc1: error: bad value (armv4) for -mcpu= switch
make[1]: *** [arch/arm/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
I'm sure that I'm not doing something easy, but I'm a virgin to Embedded
systems.
Sorry for the post, I know you guys have more to do than answer
questions
for embedded newbies.
Thanks in advance for any assistance you can offer.
Andy Kennedy
Sr. Programmer
Technical Monitoring Research Inc.
On Wed, Jan 11, 2006 at 01:03:42PM -0700, [email protected] wrote:
> Please CC me :shameful: as I'm not part of the list.
>
> Please forgive if this has already been asked (I did look and couldn't
> find the answer).
>
> I have a fresh install of 2.6.15, patched with 2.6.15-git6, edited the
> top-level make file and changed the ARCH ?= <blah> to ARCH = arm
>
> I then issue the following commands
> make ixp4xx_defconfig
> make
>
> and I get the following:
> CHK include/linux/version.h
> UPD include/linux/version.h
> SPLIT include/linux/autoconf.h -> include/config/*
> SYMLINK include/asm-arm/arch -> include/asm-arm/arch-ixp4xx
> Generating include/asm-arm/mach-types.h
> SYMLINK include/asm -> include/asm-arm
> CC arch/arm/kernel/asm-offsets.s
> cc1: error: invalid option `big-endian'
> cc1: error: invalid option `apcs'
> cc1: error: invalid option `no-sched-prolog'
> cc1: error: invalid option `abi=apcs-gnu'
> cc1: error: invalid option `tune=strongarm110'
> cc1: error: bad value (armv4) for -march= switch
> cc1: error: bad value (armv4) for -mcpu= switch
> make[1]: *** [arch/arm/kernel/asm-offsets.s] Error 1
> make: *** [prepare0] Error 2
>
> I'm sure that I'm not doing something easy, but I'm a virgin to Embedded
> systems.
I suspect that you did not change your CC variable to point to your
ARM toolchain. This is generally what causes gcc to complain about
invalid options.
> Sorry for the post, I know you guys have more to do than answer
> questions
> for embedded newbies.
>
> Thanks in advance for any assistance you can offer.
>
> Andy Kennedy
> Sr. Programmer
> Technical Monitoring Research Inc.
Regards,
Willy