Hi,
finally - I got multi target (that is a SCSI device other than ID = 0 and more than than one) working
with the USB2Xchange. But it needs two ugly changes in transport.c:
The first one is only encoding the ID, no LUN:
--- ../linux-2.6.15/drivers/usb/storage/transport.c 2006-01-03 04:21:10.000000000 +0100
+++ drivers/usb/storage/transport.c 2006-01-30 18:49:25.172317000 +0100
@@ -983,7 +983,7 @@
bcb->Tag = ++us->tag;
bcb->Lun = srb->device->lun;
if (us->flags & US_FL_SCM_MULT_TARG)
- bcb->Lun |= srb->device->id << 4;
+ bcb->Lun = srb->device->id;
bcb->Length = srb->cmd_len;
/* copy the command payload */
Would it be ok when special case that one only for the Adaptec device, for now?
Or define a whole new 2nd MULTI_TARG(2) quirk?
And furthermore the device does not respond to request other than the attached targets,
this might be needed:
@@ -1069,6 +1069,19 @@
US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
le32_to_cpu(bcs->Signature), bcs->Tag,
residue, bcs->Status);
+
+ if (bcs->Status > US_BULK_STAT_FAIL) {
+ /* Adaptec USB2XCHANGE */
+ if (us->pusb_dev->descriptor.idVendor == 0x03f3 &&
+ us->pusb_dev->descriptor.idProduct == 0x2003) {
+
+ /* This device will send bcs->Status == 0x8a for unused targets and
+ == 0x02 for SRB's that require SENSE. */
+ bcs->Status = US_BULK_STAT_OK;
+ fake_sense = 1;
+ US_DEBUGP("Patched Bulk status to %d.\n", bcs->Status);
+ }
+ }
if (bcs->Tag != us->tag || bcs->Status > US_BULK_STAT_PHASE) {
US_DEBUGP("Bulk logical error\n");
return USB_STOR_TRANSPORT_ERROR;
Yours,
--
Ren? Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany)
http://www.exactcode.de | http://www.t2-project.org
+49 (0)30 255 897 45
So how do you address a multi-LUN device with the USB2Xchange?
Matt
On Mon, Jan 30, 2006 at 07:04:15PM +0100, Ren? Rebe wrote:
> Hi,
>
> finally - I got multi target (that is a SCSI device other than ID = 0 and more than than one) working
> with the USB2Xchange. But it needs two ugly changes in transport.c:
>
> The first one is only encoding the ID, no LUN:
>
> --- ../linux-2.6.15/drivers/usb/storage/transport.c 2006-01-03 04:21:10.000000000 +0100
> +++ drivers/usb/storage/transport.c 2006-01-30 18:49:25.172317000 +0100
> @@ -983,7 +983,7 @@
> bcb->Tag = ++us->tag;
> bcb->Lun = srb->device->lun;
> if (us->flags & US_FL_SCM_MULT_TARG)
> - bcb->Lun |= srb->device->id << 4;
> + bcb->Lun = srb->device->id;
> bcb->Length = srb->cmd_len;
>
> /* copy the command payload */
>
> Would it be ok when special case that one only for the Adaptec device, for now?
> Or define a whole new 2nd MULTI_TARG(2) quirk?
>
> And furthermore the device does not respond to request other than the attached targets,
> this might be needed:
>
> @@ -1069,6 +1069,19 @@
> US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
> le32_to_cpu(bcs->Signature), bcs->Tag,
> residue, bcs->Status);
> +
> + if (bcs->Status > US_BULK_STAT_FAIL) {
> + /* Adaptec USB2XCHANGE */
> + if (us->pusb_dev->descriptor.idVendor == 0x03f3 &&
> + us->pusb_dev->descriptor.idProduct == 0x2003) {
> +
> + /* This device will send bcs->Status == 0x8a for unused targets and
> + == 0x02 for SRB's that require SENSE. */
> + bcs->Status = US_BULK_STAT_OK;
> + fake_sense = 1;
> + US_DEBUGP("Patched Bulk status to %d.\n", bcs->Status);
> + }
> + }
> if (bcs->Tag != us->tag || bcs->Status > US_BULK_STAT_PHASE) {
> US_DEBUGP("Bulk logical error\n");
> return USB_STOR_TRANSPORT_ERROR;
>
> Yours,
>
> --
> Ren? Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany)
> http://www.exactcode.de | http://www.t2-project.org
> +49 (0)30 255 897 45
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
> for problems? Stop! Download the new AJAX search engine that makes
> searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd_______________________________________________
> [email protected]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
--
Matthew Dharm Home: [email protected]
Maintainer, Linux USB Mass Storage Driver
NYET! The evil stops here!
-- Pitr
User Friendly, 6/22/1998
So how do you address a multi-LUN target if you don't encode the LUN?
Matt
On Mon, Jan 30, 2006 at 07:04:15PM +0100, Ren? Rebe wrote:
> Hi,
>
> finally - I got multi target (that is a SCSI device other than ID = 0 and more than than one) working
> with the USB2Xchange. But it needs two ugly changes in transport.c:
>
> The first one is only encoding the ID, no LUN:
>
> --- ../linux-2.6.15/drivers/usb/storage/transport.c 2006-01-03 04:21:10.000000000 +0100
> +++ drivers/usb/storage/transport.c 2006-01-30 18:49:25.172317000 +0100
> @@ -983,7 +983,7 @@
> bcb->Tag = ++us->tag;
> bcb->Lun = srb->device->lun;
> if (us->flags & US_FL_SCM_MULT_TARG)
> - bcb->Lun |= srb->device->id << 4;
> + bcb->Lun = srb->device->id;
> bcb->Length = srb->cmd_len;
>
> /* copy the command payload */
>
> Would it be ok when special case that one only for the Adaptec device, for now?
> Or define a whole new 2nd MULTI_TARG(2) quirk?
>
> And furthermore the device does not respond to request other than the attached targets,
> this might be needed:
>
> @@ -1069,6 +1069,19 @@
> US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
> le32_to_cpu(bcs->Signature), bcs->Tag,
> residue, bcs->Status);
> +
> + if (bcs->Status > US_BULK_STAT_FAIL) {
> + /* Adaptec USB2XCHANGE */
> + if (us->pusb_dev->descriptor.idVendor == 0x03f3 &&
> + us->pusb_dev->descriptor.idProduct == 0x2003) {
> +
> + /* This device will send bcs->Status == 0x8a for unused targets and
> + == 0x02 for SRB's that require SENSE. */
> + bcs->Status = US_BULK_STAT_OK;
> + fake_sense = 1;
> + US_DEBUGP("Patched Bulk status to %d.\n", bcs->Status);
> + }
> + }
> if (bcs->Tag != us->tag || bcs->Status > US_BULK_STAT_PHASE) {
> US_DEBUGP("Bulk logical error\n");
> return USB_STOR_TRANSPORT_ERROR;
>
> Yours,
>
> --
> Ren? Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany)
> http://www.exactcode.de | http://www.t2-project.org
> +49 (0)30 255 897 45
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
> for problems? Stop! Download the new AJAX search engine that makes
> searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd_______________________________________________
> [email protected]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
--
Matthew Dharm Home: [email protected]
Maintainer, Linux USB Mass Storage Driver
A female who groks UNIX? My universe is collapsing.
-- Mike
User Friendly, 10/11/1998