ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
- John's time rework patches were dropped - they're being reworked.
- Lots of MD and DM updates
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the
mm-commits mailing list.
echo "subscribe mm-commits" | mail [email protected]
- If you hit a bug in -mm and it's not obvious which patch caused it, it is
most valuable if you can perform a bisection search to identify which patch
introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and
reboots), so consider reporting the bug first and if we cannot immediately
identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing
list on any email.
Changes since 2.6.16-rc6-mm1:
origin.patch
git-acpi.patch
git-agpgart.patch
git-alsa.patch
git-audit-master.patch
git-blktrace.patch
git-cfq.patch
git-cifs.patch
git-cpufreq.patch
git-drm.patch
git-dvb.patch
git-ia64.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-kbuild.patch
git-libata-all.patch
git-netdev-all.patch
git-net.patch
git-nfs.patch
git-ntfs.patch
git-ocfs2.patch
git-powerpc.patch
git-sym2.patch
git-pcmcia.patch
git-scsi-misc.patch
git-scsi-target.patch
git-sas-jg.patch
git-sparc64.patch
git-watchdog.patch
git-xfs.patch
git-cryptodev.patch
git-viro-bird-m32r.patch
git-viro-bird-m68k.patch
git-viro-bird-uml.patch
git-viro-bird-frv.patch
git-viro-bird-upf.patch
git-viro-bird-volatile.patch
git trees.
-mtd_dataflash-fix-block-vs-page-erase.patch
-acpi-thermal-driver-leaks-in-failure-path.patch
-drivers-acpi-videoc-fix-a-null-pointer-dereference.patch
-move-pci_dev_put-outside-a-spinlock.patch
-pxa2xx-ssp-spi-driver.patch
-get_cpu_sysdev-signedness-fix.patch
-input-pcspkr-device-and-driver-separation.patch
-drivers-input-serio-serioc-fix-a-memory-leak.patch
-drivers-input-gameport-gameportc-fix-a-memory-leak.patch
-kbuild-add-fverbose-asm-to-i386-makefile.patch
-remove-the-config_cc_align_-options.patch
-ahci-fix-null-pointer-dereference-detected-by-coverity.patch
-git-netdev-all-ipw2200-warning-fix.patch
-drivers-net-e1000-proper-prototypes.patch
-3c509-use-proper-suspend-resume-api.patch
-tg3-netif_carrier_off-runs-too-early-could-still-be-queued-when-init-fails.patch
-config_forcedeth-updates.patch
-git-net-arm-build-fix.patch
-git-net-export-security_sid_to_context.patch
-git-net-ebtables-fix.patch
-git-net-br_netfilter-warning-fixes.patch
-net-decnet-dn_routec-fix-inconsequent-null-checking.patch
-gregkh-pci-x86-pci-domain-support-a-humble-fix.patch
-gregkh-pci-x86-pci-domain-support-struct-pci_sysdata.patch
-gregkh-pci-pci-fix-the-x86-pci-domain-support-fix.patch
-gregkh-pci-pci-device-ensure-sysdata-initialised.patch
-module_alias_blockchardev_major-for-drivers-scsi.patch
-drivers-scsi-flashpointc-remove-unused-things.patch
-drivers-scsi-flashpointc-remove-trivial-wrappers.patch
-drivers-scsi-flashpointc-remove-uchar.patch
-drivers-scsi-flashpointc-remove-ushort.patch
-drivers-scsi-flashpointc-remove-uint.patch
-drivers-scsi-flashpointc-remove-ulong.patch
-drivers-scsi-flashpointc-remove-ushort_ptr.patch
-drivers-scsi-flashpointc-use-standard-fixed-size-types.patch
-drivers-scsi-flashpointc-untypedef-struct-_sccb.patch
-drivers-scsi-flashpointc-untypedef-struct-sccbmgr_info.patch
-drivers-scsi-flashpointc-untypedef-struct-sccbmgr_tar_info.patch
-drivers-scsi-flashpointc-untypedef-struct-nvraminfo.patch
-drivers-scsi-flashpointc-untypedef-struct-sccbcard.patch
-drivers-scsi-flashpointc-lindent.patch
-drivers-scsi-flashpointc-dont-use-parenthesis-with-return.patch
-drivers-message-fusion-mptbasec-make-mpt_read_ioc_pg_3-static.patch
-drivers-message-fusion-mptctlc-make-struct-async_queue-static.patch
-drivers-scsi-ncr_d700c-fix-a-null-dereference.patch
-scsi-dmx3191dc-fix-a-null-pointer-dereference.patch
-drivers-scsi-ibmmcac-fix-a-null-pointer-dereference.patch
-drivers-scsi-sim710c-fix-a-null-pointer-dereference.patch
-drivers-usb-media-vicamc-fix-a-null-pointer-dereference.patch
-usbcore-fix-check_ctrlrecip-to-allow-control-transfers-in-state-address.patch
-x86_64-mm-drop-iommu-bus-check.patch
-page-migration-fail-if-page-is-in-a-vma-flagged-vm_locked.patch
-page-migration-documentation-update.patch
-powerpc-make-pmd_bad-and-pud_bad-checks-non-trivial.patch
-pnp-modalias-sysfs-export.patch
-i2o-memory-leak-in-i2o_exec_lct_modified.patch
-drivers-char-watchdog-pcwd_usbc-fix-a-null-pointer-dereference.patch
-net-sunrpc-clntc-fix-a-null-pointer-dereference.patch
-rename-setuid-dumpable-sysctl.patch
-pnp-ns558-adjust-pnp_register_driver-signature.patch
-pnp-i8042-adjust-pnp_register_driver-signature.patch
Merged
+remove-sleep_avg-multiplier.patch
+efi_call_phys_epilog-warning-fix.patch
+i810fb_cursor-use-gfp_atomic.patch
+v9fs-assign-dentry-ops-to-negative-dentries.patch
+mark-cyc2ns_scale-readmostly.patch
2.6.16 queue
+dont-check_acpi_pci-on-x86-with-acpi-disabled.patch
Warning fix
+sound-pci-ice1712-deltac-make-2-functions-static.patch
Sound driver cleanup
+gregkh-driver-sysfs_remove_dir-needs-to-invalidate-the-dentry.patch
+gregkh-driver-kobject-fix-build-error-if-config_sysfs-n.patch
+gregkh-driver-debugfs-add-debugfs_create_blob-helper-for-exporting-binary-data.patch
+gregkh-driver-kobject_add_dir.patch
+gregkh-driver-get_cpu_sysdev-signedness-fix.patch
+gregkh-driver-unexport-sysfs-dir.patch
+gregkh-driver-sysfs_add_link-kobject-leak-fix.patch
+gregkh-driver-spi-add-pxa2xx-ssp-spi-driver.patch
Driver tree updates
-revert-gregkh-driver-put_device-might_sleep.patch
Dropped.
+gregkh-driver-kobject-fix-build-error-if-config_sysfs-n-fix.patch
Fix a driver-tree patch
+drm-sis-fix-compile-warning.patch
DRM tree fix
+git-dvb-build-fixes.patch
The DVB tree was rather broken.
+v4l-printk-warning-fixes.patch
+saa7110-fix-array-overrun.patch
+saa7111-prevent-array-overrun.patch
+saa7114-fix-i2c-block-write.patch
+adv7175-drop-unused-encoder-dump-command.patch
+adv7175-drop-unused-register-cache.patch
+zoran-use-i2c_master_send-when-possible.patch
+bt856-spare-memory.patch
+zoran-init-cleanups.patch
DVB fixes
+gregkh-i2c-i2c-ali1535-drop-redundant-mutex.patch
+gregkh-i2c-i2c-amd756-s4882-mutex-init.patch
+gregkh-i2c-i2c-piix4-add-ht1000-support.patch
+gregkh-i2c-i2c-ixp4xx-hwmon-class.patch
+gregkh-i2c-i2c-drop-unneeded-i2c-dev-h-includes.patch
+gregkh-i2c-hwmon-rename-register-parameters.patch
+gregkh-i2c-hwmon-add-required-idr-locking.patch
I2C tree updates
+git-libata-all-build-hacks.patch
Fix clash between git-scsi-misc and git-libata-all.
+natsemi-add-support-for-using-mii-port-with-no-phy.patch
+natsemi-add-support-for-using-mii-port-with-no-phy-fix.patch
+natsemi-support-oversized-eeproms.patch
+add-a-pci-vendor-id-definition-for-aculab.patch
+natsemi-add-quirks-for-aculab-e1-t1-pmxc-cpci-carrier-cards.patch
+amd-au1xx0-fix-ethernet-tx-stats.patch
+amd-au1xx0-fix-ethernet-tx-stats-tidy.patch
+skfp-warning-fixes.patch
+git-netdev-all-tg3-warning-fix.patch
netdev updates
+scm-fold-__scm_send-into-scm_send.patch
+scm_send-speedup.patch
Fiddle with the scm code.
+fix-irda-usb-use-after-use.patch
+net-bluetooth-return-negative-error-constant.patch
Net fixes
-nfs-fix-a-busy-inodes-issue.patch
-git-nfs-oops-workaround.patch
Dropped - git-nfs got fixed.
+sunrpc-fix-a-busy-inodes-error-in-rpc_pipefs.patch
git-nfs fix
-nfs-permit-filesystem-to-override-root-dentry-on-mount-6.patch
-9p-fix-error-handling-on-superblock-alloc-failure.patch
-nfs-abstract-out-namespace-initialisation-6.patch
-nfs-add-dentry-materialisation-op-6.patch
-nfs-unify-nfs-superblocks-per-protocol-per-server-6.patch
Dropped.
-optimise-d_find_alias-fix.patch
Folded into optimise-d_find_alias.patch
-gregkh-pci-x86-pci-domain-support-the-meat.patch
-revert-gregkh-pci-x86-pci-domain-support-the-meat.patch
Dropped
+gregkh-pci-pci-i386-run-bios-pci-detection-before-direct.patch
+gregkh-pci-shpchp-cleanup-bus-speed-handling.patch
+gregkh-pci-pci-hotplug-sn-fix-cleanup-on-hotplug-removal-of-ppb.patch
+gregkh-pci-acpiphp-scan-slots-under-the-nested-p2p-bridge.patch
+gregkh-pci-pci-kzalloc-conversion-in-drivers-pci.patch
+gregkh-pci-pci-hotplug-add-common-acpi-functions-to-core.patch
+gregkh-pci-ibmphp-remove-true-and-false.patch
+gregkh-pci-acpiphp-fix-acpi_path_name.patch
PCI tree updates
+mm-drivers-pci-msi-explicit-declaration-of-msi_register.patch
Fix it.
+remove-drivers-scsi-constantscscsi_print_req_sense.patch
+link-scsi_debug-later.patch
SCSI fixes
+areca-raid-linux-scsi-driver-update4.patch
Update areca-raid-linux-scsi-driver.patch
+git-sas-jg-build-hack.patch
Fix git-sas-jg.patch for git-scsi-misc changes
+sparc64-config_blk_dev_ram-fix.patch
Fix sparc64 build
+gregkh-usb-usb-storage-sandisk-unusual_devices-entry.patch
+gregkh-usb-usb-storage-another-unusual_devs.h-entry.patch
+gregkh-usb-usb-storage-unusual_devs.h-entry-0420-0001.patch
+gregkh-usb-usb-storage-new-unusual_devs.h-entry-mitsumi-7in1-card-reader.patch
+gregkh-usb-usb-add-support-for-creativelabs-silvercrest-usb-keyboard.patch
+gregkh-usb-usb-zc0301-driver-bugfix.patch
+gregkh-usb-usb-vicam.c-fix-a-null-pointer-dereference.patch
+gregkh-usb-usb-fix-check_ctrlrecip-to-allow-control-transfers-in-state-address.patch
+gregkh-usb-usb-cp2101-add-new-device-ids.patch
+gregkh-usb-usb-ftdi_sio-add-icom-id1-usb-product-and-vendor-ids.patch
+gregkh-usb-usb-rtl8150-small-fix.patch
+gregkh-usb-navman-usb-serial.patch
USB tree updates
+fix-hostap_cs-double-kfree.patch
+ieee80211_wxc-remove-dead-code.patch
Wireless updates
+x86_64-mm-remove-unordered-io.patch
+x86_64-mm-make-gart_iommu-kconfig-help-text-more-specific-trivial.patch
+x86_64-mm-local-64bit.patch
+x86_64-mm-horus-pci.patch
+x86_64-mm-eliminate-register_die_notifier-symbol-exported.patch
+x86_64-mm-memnode-cache.patch
+x86_64-mm-amd-3core.patch
+x86-64-fix-double-definition-of-force_iommu.patch
x86_64 updates
-revert-x86_64-mm-dmi-early.patch
Dropped
+xfs_file_compat_invis_ioctl-fix.patch
Fix git-xfs.patch
+fix-i386-x86-64-_page_pse-bit-when-changing-page-protection.patch
Fix enable-mprotect-on-huge-pages.patch
+fix-swap-cluster-offset.patch
swap allocator fix
+page-migration-reorg.patch
+page-migration-reorg-fixes.patch
+page-migration-reorg-cleanup.patch
+page-migration-reorg-cleanup-fix.patch
Reorganise the page migration code
+selinux-cleanup-stray-variable-in-selinux_inode_init_security.patch
SELinux fixlet
+x86-topology-dont-create-a-control-file-for-bsp-that-cannot-be-removed.patch
topology-in-sysfs fix
+ia64-use-i386-dmi_scanc-fix.patch
Fix ia64-use-i386-dmi_scanc.patch
-swsusp-pm-refuse-to-suspend-devices-if-wrong-console-is-active.patch
Dropped
+swsusp-drain-high-mem-pages.patch
swsusp fix
+rio-driver-rework-continued-1.patch
+rio-driver-rework-continued-2.patch
+rio-driver-rework-continued-3.patch
+rio-driver-rework-continued-4.patch
+rio-driver-rework-continued-5.patch
RIO driver cleanups
+v9fs-print-9p-messages-fix-4.patch
+v9fs-add-extension-field-to-tcreate.patch
Fix v9fs-print-9p-messages.patch some more
+indirect_print_item-warning-fix.patch
+update-some-vfs-documentation.patch
+update-some-vfs-documentation-fix.patch
+honour-aop_truncate_page-returns-in-page_symlink.patch
+make-address_space_operations-sync_page-return-void.patch
+make-address_space_operations-invalidatepage-return-void.patch
+make-address_space_operations-invalidatepage-return-void-jbd-fix.patch
+make-address_space_operations-invalidatepage-return-void-versus-git-nfs.patch
+maintainers-remove-dead-url.patch
+ext2-flags-shouldnt-report-nogrpid.patch
+fix-backwards-meaning-of-ms_verbose.patch
+no-need-to-protect-current-group_info-in-sys_getgroups.patch
+roundup_pow_of_two-64-bit-fix.patch
+fix-alloc_large_system_hash-roundup.patch
+fix-a-race-condition-between-i_mapping-and-iput.patch
+i2o_dump_hrt-output-cleanup.patch
+compat_sys_nfsservctl-handle-errors-correctly.patch
+radix-tree-documentation-cleanups.patch
+i4l-isdn_ttyc-fix-a-check-after-use.patch
+fix-sb_mixer-use-before-validation.patch
+v9fs-fix-vfs_inode-dereference-before-null-check.patch
+altix-rs422-support-for-ioc4-serial-driver.patch
Misc updates
+make-fork-atomic-wrt-pgrp-session-signals.patch
fork() fix
+ext3-get-blocks-maping-multiple-blocks-at-a-once-journal-reentry-fix.patch
Fix ext3-get-blocks-maping-multiple-blocks-at-a-once.patch
+ext3-add-o-bh-option-fix.patch
Fix ext3-add-o-bh-option.patch
-time-reduced-ntp-rework-part-1.patch
-time-reduced-ntp-rework-part-1-fix-adjtimeadj.patch
-time-reduced-ntp-rework-part-2.patch
-time-reduced-ntp-rework-part-2-fix-adjtimeadj.patch
-time-reduced-ntp-rework-part-2-remove-duplicate.patch
-time-clocksource-infrastructure.patch
-time-clocksource-infrastructure-remove-nsec_t.patch
-time-generic-timekeeping-infrastructure.patch
-time-generic-timekeeping-infrastructure-remove-nsec_t.patch
-time-generic-timekeeping-infrastructure-fix-ntp_synced.patch
-time-generic-timekeeping-infrastructure-wall_offset-helper-cleanup.patch
-time-i386-conversion-part-1-move-timer_pitc-to-i8253c.patch
-time-i386-conversion-part-2-rework-tsc-support.patch
-time-i386-conversion-part-2-rework-tsc-support-section-fix.patch
-time-i386-conversion-part-3-enable-generic-timekeeping.patch
-time-i386-conversion-part-3-remove-nsec_t.patch
-time-i386-conversion-part-3-backout-pmtmr-changes.patch
-time-i386-conversion-part-3-lock-jiffies_64.patch
-time-i386-conversion-part-4-remove-old-timer_opts-code.patch
-time-i386-conversion-part-4-del-timer_tscc.patch
-time-i386-clocksource-drivers.patch
-time-i386-clocksource-drivers-backout-pmtmr-changes.patch
-time-i386-clocksource-drivers-drop-acpi_pm_buggy.patch
-time-fix-cpu-frequency-detection.patch
-time-delay-clocksource-selection-until-later-in-boot.patch
-x86-blacklist-tsc-from-systems-where-it-is-known-to-be-bad.patch
-i386-dont-disable-the-tsc-on-single-node-numaqs.patch
-kernel-timec-remove-unused-pps_-variables.patch
Dropped - being redone.
+hrtimer-optimize-softirq-runqueues.patch
+pass-current-time-to-hrtimer_forward.patch
+posix-timer-cleanup-common_timer_get.patch
+posix-timer-cleanup-common_timer_get-fix.patch
+hrtimer-simplify-nanosleep.patch
+hrtimer-remove-state-field.patch
+hrtimer-remove-state-field-fix.patch
+remove-it_real_value-calculation-from-proc-stat.patch
+remove-define_ktime-and-ktime_to_clock_t.patch
+remove-nsec_t-typedef.patch
+hrtimers-remove-data-field.patch
hrtimers updates
+kprobes-fix-broken-fault-handling-for-i386.patch
+kprobes-fix-broken-fault-handling-for-x86_64.patch
+kprobes-fix-broken-fault-handling-for-powerpc64.patch
+kprobes-fix-broken-fault-handling-for-ia64.patch
+kprobes-fix-broken-fault-handling-for-sparc64.patch
+kprobes-fix-broken-fault-handling-for-sparc64-fix.patch
kprobes fixes
-edac-name-cleanup-remove-old-bluesmoke-stuff.patch
+edac-name-cleanup.patch
-edac-fix-minor-logic-bug-in-e7xxx_remove_one.patch
+edac-e7xxx-fix-minor-logic-bug.patch
-edac-fix-usage-of-kobject_init-kobject_put.patch
+edac-kobject_init-kobject_put-fixes.patch
+edac-reorder-export_symbol-macros.patch
+edac-formatting-cleanup.patch
+edac-documentation-spelling-fixes.patch
+edac-use-sysbus_message-in-e752x-code.patch
+edac-add-maintainers-for-chipset-drivers.patch
+edac-use-export_symbol_gpl.patch
EDAC updates
+fs-nfsd-exportcnet-sunrpc-cachec-make-needlessly-global-code-static.patch
nfsd cleanup
-small-schedule-optimization.patch
+small-schedule-microoptimization.patch
Updates
+sched-store-weighted-load-on-up.patch
+sched-add-discrete-weighted-cpu-load-function.patch
+sched-add-above-background-load-function.patch
CPU scheduler tweaks
-sched-alter_uninterruptible_sleep_interactivity.patch
Dropped
+sched-activate-sched-batch-expired.patch
+sched-reduce-overhead-of-calc_load.patch
+sched-fix-interactive-task-starvation.patch
More CPU scheduler tweaks
+mm-implement-swap-prefetching-tweaks.patch
Update swap prefetch code to use new CPu scheduler features
+unify-pfn_to_page-sparc64-pfn_to_page.patch
Fix unify-pfn_to_page-generic-functions.patch
-uninline-zone-helpers-prefetch-fix.patch
Dropped, I think.
-notifier-chain-update-die_chain-changes-fix.patch
Folded into notifier-chain-update-die_chain-changes.patch
+rtc-remove-rtc-uip-synchronization-on-x86.patch
+rtc-remove-rtc-uip-synchronization-on-x86_64.patch
+rtc-remove-rtc-uip-synchronization-on-x86_64-fix.patch
+rtc-remove-rtc-uip-synchronization-on-sparc64.patch
+rtc-remove-rtc-uip-synchronization-on-ppc-chrp-arch-ppc.patch
+rtc-remove-rtc-uip-synchronization-on-chrp-arch-powerpc.patch
+rtc-remove-rtc-uip-synchronization-on-ppc-maple.patch
+rtc-remove-rtc-uip-synchronization-on-arm.patch
+rtc-remove-rtc-uip-synchronization-on-mips-mc146818.patch
+rtc-remove-rtc-uip-synchronization-on-mips-based-dec.patch
+rtc-remove-rtc-uip-synchronization-on-sh03.patch
+rtc-remove-rtc-uip-synchronization-on-sh-mpc1211.patch
+rtc-remove-rtc-uip-synchronization-on-alpha.patch
+rtc-fix-up-some-rtc-whitespace-and-style.patch
+rtc-remove-some-duplicate-bcd-definitions.patch
Save one second during bootup.
+proc-dont-lock-task_structs-indefinitely-fix-the-locking-when-reading-the-number-of-threads-in.patch
+proc-dont-lock-task_structs-indefinitely-fix-the-locking-when-reading-the-number-of-threads-in-nitpick.patch
Updates to the /proc patches
-reiser4-vs-nfs-apply-mount-root-dentry-override-to-filesystems.patch
Unneeded
+make-address_space_operations-invalidatepage-return-void-reiser4.patch
Update reiser4 for other -mm patches
+fbdev-add-modeline-for-1680x1050-60.patch
fbdev fix
+device-mapper-snapshot-replace-sibling-list-fix.patch
Fix device-mapper-snapshot-replace-sibling-list.patch
+dm-snapshot-fix-kcopyd-destructor.patch
+dm-flush-queue-eintr.patch
+dm-store-md-name.patch
+dm-tidy-mdptr.patch
+dm-table-store-md.patch
+dm-store-geometry.patch
+dm-md-dependency-tree-in-sysfs-holders-slaves-subdirectory.patch
+dm-md-dependency-tree-in-sysfs-bd_claim_by_kobject.patch
+dm-md-dependency-tree-in-sysfs-md-to-use-bd_claim_by_disk.patch
+dm-md-dependency-tree-in-sysfs-dm-to-use-bd_claim_by_disk.patch
+dm-md-dependency-tree-in-sysfs-convert-bd_sem-to-bd_mutex.patch
+dm-remove-unnecessary-typecast.patch
Device Mapper updates
+md-add-4-to-the-list-of-levels-for-which-bitmaps-are-supported.patch
+md-fix-the-failed-count-for-version-0-superblocks.patch
+md-update-status_resync-to-handle-large-devices.patch
+md-split-disks-array-out-of-raid5-conf-structure-so-it-is-easier-to-grow.patch
+md-allow-stripes-to-be-expanded-in-preparation-for-expanding-an-array.patch
+md-allow-stripes-to-be-expanded-in-preparation-for-expanding-an-array-init_list_head-to-list_head-conversions.patch
+md-allow-stripes-to-be-expanded-in-preparation-for-expanding-an-array-init_list_head-to-list_head-conversions-documentation-and-tidy-up-for-resize_stripes.patch
+md-infrastructure-to-allow-normal-io-to-continue-while-array-is-expanding.patch
+md-core-of-raid5-resize-process.patch
+md-core-of-raid5-resize-process-make-new-function-stripe_to_pdidx-static.patch
+md-final-stages-of-raid5-expand-code.patch
+md-final-stages-of-raid5-expand-code-fix.patch
+md-checkpoint-and-allow-restart-of-raid5-reshape.patch
+md-checkpoint-and-allow-restart-of-raid5-reshape-remove-an-unused-variable.patch
+md-only-checkpoint-expansion-progress-occasionally.patch
+md-split-reshape-handler-in-check_reshape-and-start_reshape.patch
+md-make-reshape-a-possible-sync_action-action.patch
+md-support-suspending-of-io-to-regions-of-an-md-array.patch
+md-improve-comments-about-locking-situation-in-raid5-make_request.patch
+md-remove-some-stray-semi-colons-after-functions-called-in-macro.patch
RAID updates
+for_each_possible_cpu-defines-for_each_possible_cpu.patch
+for_each_possible_cpu-defines-for_each_possible_cpu-fix.patch
+for_each_possible_cpu-fixes-for-generic-part.patch
+for_each_possible_cpu-network-codes.patch
+for_each_possible_cpu-under-drivers-acpi.patch
+for_each_possible_cpu-loopback-device.patch
+for_each_possible_cpu-oprofile.patch
+for_each_possible_cpu-scsi.patch
+for_each_possible_cpu-for-arm.patch
+for_each_possible_cpu-i386.patch
+for_each_possible_cpu-i386-fix.patch
+for_each_possible_cpu-i386-fix-2.patch
+for_each_possible_cpu-ia64.patch
+for_each_possible_cpu-mips.patch
+for_each_possible_cpu-powerpc.patch
+for_each_possible_cpu-ppc.patch
+for_each_possible_cpu-s390.patch
+for_each_possible_cpu-sh.patch
+for_each_possible_cpu-sparc.patch
+for_each_possible_cpu-sparc64.patch
+for_each_possible_cpu-x86_64.patch
+for_each_possible_cpu-xfs.patch
+for_each_possible_cpu-documentaion.patch
Rename for_each_cpu() to for_each_possible_cpu()
+nmi-lockup-and-altsysrq-p-dumping-calltraces-on-_all_-cpus-fixes.patch
Fix nmi-lockup-and-altsysrq-p-dumping-calltraces-on-_all_-cpus.patch
+slab-cache-shrinker-statistics-make-the-dummy-kmem_set_shrinker-a-static-inline.patch
Fix slab-cache-shrinker-statistics.patch
+git-viro-bird-xfs-fixup.patch
Fix XFS
All 1617 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/patch-list
Andrew Morton wrote (ao):
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
Good news! This kernel lets me use eight Maxtor sata disks in raid5 over
nForce4 and Marvell MV88SX6081.
I do:
mdadm -C -l5 -n8 /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 \
/dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 /dev/sdh1
mke2fs -j -m1 /dev/md0
mount -o data=writeback,nobh /dev/md0 /mnt
for i in `seq 10`
do dd if=/dev/zero of=bigfile.$i bs=1024k count=10000
done
md5sum bigfile.*
rm bigfile.*
and
for i in `seq 10`
do dd if=/dev/zero of=bigfile.$i bs=1024k count=10000 &
done
sleep 1200
md5sum bigfile.*
rm bigfile.*
and
for i in `seq 4`
do ( dd if=/dev/zero of=bigfile.$i bs=1024k count=10000 ; \
time md5sum bigfile.$i ) &
done
I experience no crash and no data corruption with these simple tests.
2.6.16-rc6 crashes with no output of the crash on netconsole (have to
find a screen to connect to the system).
2.6.16-rc3 crashes too:
http://www.ussg.iu.edu/hypermail/linux/kernel/0602.2/0360.html
I haven't tried 2.6.16-rc6-mm1.
With 2.6.16-rc6-mm2 I do get "BUG: warning ..." and "Call Trace: ..."
messages during boot (see dmesg below), which are not there with 2.6.16-rc6.
But that seems not to cause any problems.
I also see these appear during the tests:
[ 3584.499415] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 3584.499469] ata5: status=0xd0 { Busy }
[ 4430.676302] ata9: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 4430.676355] ata9: status=0xd0 { Busy }
But with no visible effect.
Thanks!
Kind regards, Sander
[ 82.078411] libata version 1.20 loaded.
[ 82.078449] sata_nv 0000:00:07.0: version 0.8
[ 82.078457] ACPI (acpi_bus-0216): Device 'SAT0' is not power manageable [20060210]
[ 82.078917] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 82.078967] GSI 20 sharing vector 0xD1 and IRQ 20
[ 82.079015] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 20
[ 82.079376] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 82.079446] ata1: SATA max UDMA/133 cmd 0x1440 ctl 0x1436 bmdma 0x1410 irq 20
[ 82.079520] ata2: SATA max UDMA/133 cmd 0x1438 ctl 0x1432 bmdma 0x1418 irq 20
[ 82.295014] ata1: SATA link up 3.0 Gbps (SStatus 123)
[ 82.494850] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f69 84:4773 85:7c69 86:3e01 87:4763 88:407f
[ 82.494854] ata1: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
[ 82.496131] nv_sata: Primary device added
[ 82.496184] nv_sata: Primary device removed
[ 82.496228] nv_sata: Secondary device added
[ 82.496273] nv_sata: Secondary device removed
[ 82.524820] ata1: dev 0 configured for UDMA/133
[ 82.524865] scsi0 : sata_nv
[ 82.744454] ata2: SATA link down (SStatus 0)
[ 82.744500] scsi1 : sata_nv
[ 82.744637] Vendor: ATA Model: Maxtor 7H500F0 Rev: HA43
[ 82.745399] Type: Direct-Access ANSI SCSI revision: 05
[ 82.745582] ACPI (acpi_bus-0216): Device 'SAT1' is not power manageable [20060210]
[ 82.746058] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 22
[ 82.746108] GSI 21 sharing vector 0xD9 and IRQ 21
[ 82.746157] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 22 (level, high) -> IRQ 21
[ 82.746485] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 82.746551] ata3: SATA max UDMA/133 cmd 0x1458 ctl 0x144E bmdma 0x1420 irq 21
[ 82.746628] ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x144A bmdma 0x1428 irq 21
[ 82.964178] ata3: SATA link down (SStatus 0)
[ 82.964222] scsi2 : sata_nv
[ 83.183902] ata4: SATA link down (SStatus 0)
[ 83.183946] scsi3 : sata_nv
[ 83.184069] sata_mv 0000:0a:03.0: version 0.6
[ 83.184129] GSI 22 sharing vector 0xE1 and IRQ 22
[ 83.184174] ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 30 (level, low) -> IRQ 22
[ 83.187740] sata_mv 0000:0a:03.0: 32 slots 8 ports SCSI mode IRQ via INTx
[ 83.187857] ata5: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC20000222120 bmdma 0x0 irq 22
[ 83.187951] ata6: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC20000224120 bmdma 0x0 irq 22
[ 83.188042] ata7: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC20000226120 bmdma 0x0 irq 22
[ 83.188132] ata8: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC20000228120 bmdma 0x0 irq 22
[ 83.188222] ata9: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC20000232120 bmdma 0x0 irq 22
[ 83.188314] ata10: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC20000234120 bmdma 0x0 irq 22
[ 83.188404] ata11: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC20000236120 bmdma 0x0 irq 22
[ 83.188495] ata12: SATA max UDMA/133 cmd 0x0 ctl 0xFFFFC20000238120 bmdma 0x0 irq 22
[ 83.244314] BUG: warning at drivers/scsi/sata_mv.c:1896/__msleep()
[ 83.244362]
[ 83.244362] Call Trace: <IRQ> <ffffffff80408d00>{__mv_phy_reset+242}
[ 83.244509] <ffffffff804081ec>{mv_channel_reset+133} <ffffffff80409361>{mv_interrupt+565}
[ 83.244669] <ffffffff8023bf2c>{handle_IRQ_event+41} <ffffffff8023bffa>{__do_IRQ+155}
[ 83.244828] <ffffffff8020c13b>{do_IRQ+59} <ffffffff8020834c>{default_idle+0}
[ 83.244989] <ffffffff80209d64>{ret_from_intr+0} <EOI> <ffffffff804eb96d>{thread_return+86}
[ 83.245172] <ffffffff80208379>{default_idle+45} <ffffffff80208406>{cpu_idle+98}
[ 83.245329] <ffffffff807c4018>{start_secondary+1224}
[ 86.569852] ata5: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:007f
[ 86.569856] ata5: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 86.570840] BUG: warning at drivers/scsi/libata-core.c:3884/__ata_qc_complete()
[ 86.570902]
[ 86.570903] Call Trace: <IRQ> <ffffffff80401694>{__ata_qc_complete+98}
[ 86.571046] <ffffffff8040939e>{mv_interrupt+626} <ffffffff8023bf2c>{handle_IRQ_event+41}
[ 86.571208] <ffffffff8023bffa>{__do_IRQ+155} <ffffffff8020c13b>{do_IRQ+59}
[ 86.571365] <ffffffff80209d64>{ret_from_intr+0} <EOI> <ffffffff804eccd2>{__reacquire_kernel_lock+39}
[ 86.571552] <ffffffff804eb9bd>{thread_return+166} <ffffffff804ebfe5>{schedule_timeout+138}
[ 86.571713] <ffffffff8022a66c>{process_timeout+0} <ffffffff804eaeaf>{wait_for_completion_timeout+137}
[ 86.571878] <ffffffff8021cc6f>{default_wake_function+0} <ffffffff80407402>{ata_exec_command+36}
[ 86.572042] <ffffffff804038b8>{ata_exec_internal+266} <ffffffff80404473>{ata_set_mode+667}
[ 86.575479] <ffffffff8023c4d1>{request_irq+130} <ffffffff804049f4>{ata_device_add+1163}
[ 86.575639] <ffffffff80409a41>{mv_init_one+1547} <ffffffff8036c8b2>{pci_device_probe+221}
[ 86.575799] <ffffffff803b999d>{driver_probe_device+82} <ffffffff803b9a52>{__driver_attach+0}
[ 86.575959] <ffffffff803b9aa8>{__driver_attach+86} <ffffffff803b8f5a>{bus_for_each_dev+67}
[ 86.576121] <ffffffff803b925a>{bus_add_driver+116} <ffffffff8036c918>{pci_bus_match+0}
[ 86.576279] <ffffffff8036c418>{__pci_register_driver+85} <ffffffff8020720c>{init+455}
[ 86.576438] <ffffffff8020a6b6>{child_rip+8} <ffffffff80207045>{init+0}
[ 86.576582] <ffffffff8020a6ae>{child_rip+0}
[ 86.599812] ata5: dev 0 configured for UDMA/133
[ 86.599856] scsi4 : sata_mv
[ 89.975572] ata6: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e21 87:4663 88:007f
[ 89.975576] ata6: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 89.976575] BUG: warning at drivers/scsi/libata-core.c:3884/__ata_qc_complete()
[ 89.976637]
[ 89.976638] Call Trace: <IRQ> <ffffffff80401694>{__ata_qc_complete+98}
[ 89.976780] <ffffffff8040939e>{mv_interrupt+626} <ffffffff8023bf2c>{handle_IRQ_event+41}
[ 89.976943] <ffffffff8023bffa>{__do_IRQ+155} <ffffffff8020c13b>{do_IRQ+59}
[ 89.977100] <ffffffff80209d64>{ret_from_intr+0} <EOI> <ffffffff804eb96d>{thread_return+86}
[ 89.977287] <ffffffff804ebfe5>{schedule_timeout+138} <ffffffff8022a66c>{process_timeout+0}
[ 89.977450] <ffffffff804eaeaf>{wait_for_completion_timeout+137}
[ 89.977546] <ffffffff8021cc6f>{default_wake_function+0} <ffffffff80407402>{ata_exec_command+36}
[ 89.977710] <ffffffff804038b8>{ata_exec_internal+266} <ffffffff80404473>{ata_set_mode+667}
[ 89.977871] <ffffffff804049f4>{ata_device_add+1163} <ffffffff80409a41>{mv_init_one+1547}
[ 89.978032] <ffffffff8036c8b2>{pci_device_probe+221} <ffffffff803b999d>{driver_probe_device+82}
[ 89.978195] <ffffffff803b9a52>{__driver_attach+0} <ffffffff803b9aa8>{__driver_attach+86}
[ 89.978355] <ffffffff803b8f5a>{bus_for_each_dev+67} <ffffffff803b925a>{bus_add_driver+116}
[ 89.978514] <ffffffff8036c918>{pci_bus_match+0} <ffffffff8036c418>{__pci_register_driver+85}
[ 89.978676] <ffffffff8020720c>{init+455} <ffffffff8020a6b6>{child_rip+8}
[ 89.978832] <ffffffff80207045>{init+0} <ffffffff8020a6ae>{child_rip+0}
[ 90.005534] ata6: dev 0 configured for UDMA/133
[ 90.005579] scsi5 : sata_mv
[ 93.381295] ata7: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:007f
[ 93.381299] ata7: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 93.382285] BUG: warning at drivers/scsi/libata-core.c:3884/__ata_qc_complete()
[ 93.382347]
[ 93.382348] Call Trace: <IRQ> <ffffffff80401694>{__ata_qc_complete+98}
[ 93.382491] <ffffffff8040939e>{mv_interrupt+626} <ffffffff8023bf2c>{handle_IRQ_event+41}
[ 93.382652] <ffffffff8023bffa>{__do_IRQ+155} <ffffffff8020c13b>{do_IRQ+59}
[ 93.382810] <ffffffff80209d64>{ret_from_intr+0} <EOI> <ffffffff804ecb0e>{_spin_lock_irqsave+2}
[ 93.382996] <ffffffff8022a1d9>{lock_timer_base+27} <ffffffff8022addd>{try_to_del_timer_sync+22}
[ 93.383157] <ffffffff8022ae2c>{del_timer_sync+12} <ffffffff804ebfed>{schedule_timeout+146}
[ 93.383317] <ffffffff8022a66c>{process_timeout+0} <ffffffff804eaeaf>{wait_for_completion_timeout+137}
[ 93.383480] <ffffffff8021cc6f>{default_wake_function+0} <ffffffff80407402>{ata_exec_command+36}
[ 93.383642] <ffffffff804038b8>{ata_exec_internal+266} <ffffffff80404473>{ata_set_mode+667}
[ 93.383803] <ffffffff804049f4>{ata_device_add+1163} <ffffffff80409a41>{mv_init_one+1547}
[ 93.383965] <ffffffff8036c8b2>{pci_device_probe+221} <ffffffff803b999d>{driver_probe_device+82}
[ 93.384125] <ffffffff803b9a52>{__driver_attach+0} <ffffffff803b9aa8>{__driver_attach+86}
[ 93.384285] <ffffffff803b8f5a>{bus_for_each_dev+67} <ffffffff803b925a>{bus_add_driver+116}
[ 93.384446] <ffffffff8036c918>{pci_bus_match+0} <ffffffff8036c418>{__pci_register_driver+85}
[ 93.384606] <ffffffff8020720c>{init+455} <ffffffff8020a6b6>{child_rip+8}
[ 93.384762] <ffffffff80207045>{init+0} <ffffffff8020a6ae>{child_rip+0}
[ 93.411257] ata7: dev 0 configured for UDMA/133
[ 93.411304] scsi6 : sata_mv
[ 96.787019] ata8: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:007f
[ 96.787023] ata8: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 96.788019] BUG: warning at drivers/scsi/libata-core.c:3884/__ata_qc_complete()
[ 96.788081]
[ 96.788081] Call Trace: <IRQ> <ffffffff80401694>{__ata_qc_complete+98}
[ 96.788224] <ffffffff8040939e>{mv_interrupt+626} <ffffffff8023bf2c>{handle_IRQ_event+41}
[ 96.788385] <ffffffff8023bffa>{__do_IRQ+155} <ffffffff8020c13b>{do_IRQ+59}
[ 96.788541] <ffffffff80209d64>{ret_from_intr+0} <EOI> <ffffffff8022a1c4>{lock_timer_base+6}
[ 96.788726] <ffffffff8022addd>{try_to_del_timer_sync+22} <ffffffff8022ae2c>{del_timer_sync+12}
[ 96.788886] <ffffffff804ebfed>{schedule_timeout+146} <ffffffff8022a66c>{process_timeout+0}
[ 96.789046] <ffffffff804eaeaf>{wait_for_completion_timeout+137}
[ 96.789142] <ffffffff8021cc6f>{default_wake_function+0} <ffffffff804ecb5d>{_spin_unlock_irqrestore+8}
[ 96.789302] <ffffffff804038b8>{ata_exec_internal+266} <ffffffff80404473>{ata_set_mode+667}
[ 96.789462] <ffffffff804049f4>{ata_device_add+1163} <ffffffff80409a41>{mv_init_one+1547}
[ 96.789625] <ffffffff8036c8b2>{pci_device_probe+221} <ffffffff803b999d>{driver_probe_device+82}
[ 96.789787] <ffffffff803b9a52>{__driver_attach+0} <ffffffff803b9aa8>{__driver_attach+86}
[ 96.789947] <ffffffff803b8f5a>{bus_for_each_dev+67} <ffffffff803b925a>{bus_add_driver+116}
[ 96.790110] <ffffffff8036c918>{pci_bus_match+0} <ffffffff8036c418>{__pci_register_driver+85}
[ 96.790270] <ffffffff8020720c>{init+455} <ffffffff8020a6b6>{child_rip+8}
[ 96.790426] <ffffffff80207045>{init+0} <ffffffff8020a6ae>{child_rip+0}
[ 96.816981] ata8: dev 0 configured for UDMA/133
[ 96.817025] scsi7 : sata_mv
[ 100.192743] ata9: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e21 87:4663 88:007f
[ 100.192747] ata9: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 100.193757] BUG: warning at drivers/scsi/libata-core.c:3884/__ata_qc_complete()
[ 100.193819]
[ 100.193820] Call Trace: <IRQ> <ffffffff80401694>{__ata_qc_complete+98}
[ 100.193963] <ffffffff8040939e>{mv_interrupt+626} <ffffffff8023bf2c>{handle_IRQ_event+41}
[ 100.194124] <ffffffff8023bffa>{__do_IRQ+155} <ffffffff8020c13b>{do_IRQ+59}
[ 100.194283] <ffffffff80209d64>{ret_from_intr+0} <EOI> <ffffffff804eb973>{thread_return+92}
[ 100.194469] <ffffffff804ebfe5>{schedule_timeout+138} <ffffffff8022a66c>{process_timeout+0}
[ 100.194629] <ffffffff804eaeaf>{wait_for_completion_timeout+137}
[ 100.194724] <ffffffff8021cc6f>{default_wake_function+0} <ffffffff80407402>{ata_exec_command+36}
[ 100.194887] <ffffffff804038b8>{ata_exec_internal+266} <ffffffff80404473>{ata_set_mode+667}
[ 100.195048] <ffffffff804049f4>{ata_device_add+1163} <ffffffff80409a41>{mv_init_one+1547}
[ 100.195208] <ffffffff8036c8b2>{pci_device_probe+221} <ffffffff803b999d>{driver_probe_device+82}
[ 100.195372] <ffffffff803b9a52>{__driver_attach+0} <ffffffff803b9aa8>{__driver_attach+86}
[ 100.195531] <ffffffff803b8f5a>{bus_for_each_dev+67} <ffffffff803b925a>{bus_add_driver+116}
[ 100.195690] <ffffffff8036c918>{pci_bus_match+0} <ffffffff8036c418>{__pci_register_driver+85}
[ 100.195853] <ffffffff8020720c>{init+455} <ffffffff8020a6b6>{child_rip+8}
[ 100.196010] <ffffffff80207045>{init+0} <ffffffff8020a6ae>{child_rip+0}
[ 100.222704] ata9: dev 0 configured for UDMA/133
[ 100.222749] scsi8 : sata_mv
[ 103.598467] ata10: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:007f
[ 103.598471] ata10: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 103.599467] BUG: warning at drivers/scsi/libata-core.c:3884/__ata_qc_complete()
[ 103.599530]
[ 103.599531] Call Trace: <IRQ> <ffffffff80401694>{__ata_qc_complete+98}
[ 103.599674] <ffffffff8040939e>{mv_interrupt+626} <ffffffff8023bf2c>{handle_IRQ_event+41}
[ 103.599834] <ffffffff8023bffa>{__do_IRQ+155} <ffffffff8020c13b>{do_IRQ+59}
[ 103.599992] <ffffffff80209d64>{ret_from_intr+0} <EOI> <ffffffff804eccd2>{__reacquire_kernel_lock+39}
[ 103.600179] <ffffffff804eb9bd>{thread_return+166} <ffffffff804ebfe5>{schedule_timeout+138}
[ 103.600340] <ffffffff8022a66c>{process_timeout+0} <ffffffff804eaeaf>{wait_for_completion_timeout+137}
[ 103.600502] <ffffffff8021cc6f>{default_wake_function+0} <ffffffff80407402>{ata_exec_command+36}
[ 103.600666] <ffffffff804038b8>{ata_exec_internal+266} <ffffffff80404473>{ata_set_mode+667}
[ 103.600826] <ffffffff804049f4>{ata_device_add+1163} <ffffffff80409a41>{mv_init_one+1547}
[ 103.600986] <ffffffff8036c8b2>{pci_device_probe+221} <ffffffff803b999d>{driver_probe_device+82}
[ 103.601152] <ffffffff803b9a52>{__driver_attach+0} <ffffffff803b9aa8>{__driver_attach+86}
[ 103.601314] <ffffffff803b8f5a>{bus_for_each_dev+67} <ffffffff803b925a>{bus_add_driver+116}
[ 103.604759] <ffffffff8036c918>{pci_bus_match+0} <ffffffff8036c418>{__pci_register_driver+85}
[ 103.604919] <ffffffff8020720c>{init+455} <ffffffff8020a6b6>{child_rip+8}
[ 103.605075] <ffffffff80207045>{init+0} <ffffffff8020a6ae>{child_rip+0}
[ 103.628428] ata10: dev 0 configured for UDMA/133
[ 103.628473] scsi9 : sata_mv
[ 106.994203] ata11: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e21 87:4663 88:007f
[ 106.994207] ata11: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
[ 106.995198] BUG: warning at drivers/scsi/libata-core.c:3884/__ata_qc_complete()
[ 106.995261]
[ 106.995262] Call Trace: <IRQ> <ffffffff80401694>{__ata_qc_complete+98}
[ 106.995405] <ffffffff8040939e>{mv_interrupt+626} <ffffffff8023bf2c>{handle_IRQ_event+41}
[ 106.995565] <ffffffff8023bffa>{__do_IRQ+155} <ffffffff8020c13b>{do_IRQ+59}
[ 106.995722] <ffffffff80209d64>{ret_from_intr+0} <EOI> <ffffffff804eb917>{thread_return+0}
[ 106.995907] <ffffffff804eb9bd>{thread_return+166} <ffffffff804eb9ec>{thread_return+213}
[ 106.996069] <ffffffff804ebfe5>{schedule_timeout+138} <ffffffff8022a66c>{process_timeout+0}
[ 106.996228] <ffffffff804eaeaf>{wait_for_completion_timeout+137}
[ 106.996325] <ffffffff8021cc6f>{default_wake_function+0} <ffffffff80407402>{ata_exec_command+36}
[ 106.996486] <ffffffff804038b8>{ata_exec_internal+266} <ffffffff80404473>{ata_set_mode+667}
[ 106.996646] <ffffffff804049f4>{ata_device_add+1163} <ffffffff80409a41>{mv_init_one+1547}
[ 106.996808] <ffffffff8036c8b2>{pci_device_probe+221} <ffffffff803b999d>{driver_probe_device+82}
[ 106.996969] <ffffffff803b9a52>{__driver_attach+0} <ffffffff803b9aa8>{__driver_attach+86}
[ 106.997129] <ffffffff803b8f5a>{bus_for_each_dev+67} <ffffffff803b925a>{bus_add_driver+116}
[ 106.997291] <ffffffff8036c918>{pci_bus_match+0} <ffffffff8036c418>{__pci_register_driver+85}
[ 106.997453] <ffffffff8020720c>{init+455} <ffffffff8020a6b6>{child_rip+8}
[ 106.997611] <ffffffff80207045>{init+0} <ffffffff8020a6ae>{child_rip+0}
[ 107.024165] ata11: dev 0 configured for UDMA/133
[ 107.024210] scsi10 : sata_mv
[ 107.073907] ata12: no device found (phy stat 00000000)
[ 107.073953] scsi11 : sata_mv
[ 107.074082] Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC
[ 107.074841] Type: Direct-Access ANSI SCSI revision: 05
[ 107.075044] Vendor: ATA Model: Maxtor 6L300S0 Rev: BACE
[ 107.075798] Type: Direct-Access ANSI SCSI revision: 05
[ 107.075994] Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC
[ 107.076749] Type: Direct-Access ANSI SCSI revision: 05
[ 107.076944] Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC
[ 107.077701] Type: Direct-Access ANSI SCSI revision: 05
[ 107.077900] Vendor: ATA Model: Maxtor 6L300S0 Rev: BACE
[ 107.078653] Type: Direct-Access ANSI SCSI revision: 05
[ 107.078857] Vendor: ATA Model: Maxtor 6B300S0 Rev: BANC
[ 107.079610] Type: Direct-Access ANSI SCSI revision: 05
[ 107.079806] Vendor: ATA Model: Maxtor 6L300S0 Rev: BACE
[ 107.080559] Type: Direct-Access ANSI SCSI revision: 05
[ 107.080785] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
[ 107.080848] sda: Write Protect is off
[ 107.080893] sda: Mode Sense: 00 3a 00 00
[ 107.080905] SCSI device sda: drive cache: write back
[ 107.081014] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
[ 107.081069] sda: Write Protect is off
[ 107.081112] sda: Mode Sense: 00 3a 00 00
[ 107.081124] SCSI device sda: drive cache: write back
[ 107.081170] sda: sda1
[ 107.099237] sd 0:0:0:0: Attached scsi disk sda
etc, etc.
--
Humilis IT Services and Solutions
http://www.humilis.net
On Sat, Mar 18, 2006 at 04:40:56AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.16-rc6-mm1:
>...
> git-infiniband.patch
>...
> git trees.
>...
I'm not exactly happy that this tree adds tons of RDMA CM
EXPORT_SYMBOL's that are neither currently used nor _GPL.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Sat, Mar 18, 2006 at 04:40:56AM -0800, Andrew Morton wrote:
>...
> Boilerplate:
>...
> Changes since 2.6.16-rc6-mm1:
>...
> git-nfs.patch
>...
> git trees.
>...
This patch makes a needlessly global function static.
Signed-off-by: Adrian Bunk <[email protected]>
--- linux-2.6.16-rc6-mm2-full/fs/nfs/nfs4proc.c.old 2006-03-18 18:40:47.000000000 +0100
+++ linux-2.6.16-rc6-mm2-full/fs/nfs/nfs4proc.c 2006-03-18 18:41:01.000000000 +0100
@@ -2849,7 +2849,8 @@
return status;
}
-int _nfs4_proc_setclientid_confirm(struct nfs4_client *clp, struct rpc_cred *cred)
+static int _nfs4_proc_setclientid_confirm(struct nfs4_client *clp,
+ struct rpc_cred *cred)
{
struct nfs_fsinfo fsinfo;
struct rpc_message msg = {
On Sat, Mar 18, 2006 at 04:40:56AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.16-rc6-mm1:
>...
> git-scsi-misc.patch
>...
> git trees.
ahd_match_scb() can now become static.
Signed-off-by: Adrian Bunk <[email protected]>
---
drivers/scsi/aic7xxx/aic79xx.h | 3 ---
drivers/scsi/aic7xxx/aic79xx_core.c | 5 ++++-
2 files changed, 4 insertions(+), 4 deletions(-)
--- linux-2.6.16-rc6-mm2-full/drivers/scsi/aic7xxx/aic79xx.h.old 2006-03-18 18:33:30.000000000 +0100
+++ linux-2.6.16-rc6-mm2-full/drivers/scsi/aic7xxx/aic79xx.h 2006-03-18 18:33:38.000000000 +0100
@@ -1347,9 +1347,6 @@
/************************** SCB and SCB queue management **********************/
void ahd_qinfifo_requeue_tail(struct ahd_softc *ahd,
struct scb *scb);
-int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb,
- int target, char channel, int lun,
- u_int tag, role_t role);
/****************************** Initialization ********************************/
struct ahd_softc *ahd_alloc(void *platform_arg, char *name);
--- linux-2.6.16-rc6-mm2-full/drivers/scsi/aic7xxx/aic79xx_core.c.old 2006-03-18 18:33:45.000000000 +0100
+++ linux-2.6.16-rc6-mm2-full/drivers/scsi/aic7xxx/aic79xx_core.c 2006-03-18 18:36:31.000000000 +0100
@@ -263,6 +263,9 @@
u_int mincmds);
static int ahd_verify_vpd_cksum(struct vpd_config *vpd);
static int ahd_wait_seeprom(struct ahd_softc *ahd);
+static int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb,
+ int target, char channel, int lun,
+ u_int tag, role_t role);
/******************************** Private Inlines *****************************/
@@ -7236,7 +7239,7 @@
}
/************************** SCB and SCB queue management **********************/
-int
+static int
ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target,
char channel, int lun, u_int tag, role_t role)
{
On Sat, Mar 18, 2006 at 04:40:56AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.16-rc6-mm1:
>...
> +edac-use-sysbus_message-in-e752x-code.patch
>...
> EDAC updates
>...
This patch makes the needlessly global sysbus_message static.
Signed-off-by: Adrian Bunk <[email protected]>
--- linux-2.6.16-rc6-mm2-full/drivers/edac/e752x_edac.c.old 2006-03-18 17:57:13.000000000 +0100
+++ linux-2.6.16-rc6-mm2-full/drivers/edac/e752x_edac.c 2006-03-18 17:57:36.000000000 +0100
@@ -472,7 +472,7 @@
do_membuf_error(errors);
}
-char *sysbus_message[10] = {
+static char *sysbus_message[10] = {
"Addr or Request Parity",
"Data Strobe Glitch",
"Addr Strobe Glitch",
On Sat, Mar 18, 2006 at 04:40:56AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.16-rc6-mm1:
>...
> git-net.patch
>...
> git trees.
>...
We can now make scm_detach_fds() static.
Signed-off-by: Adrian Bunk <[email protected]>
---
include/net/scm.h | 1 -
net/core/scm.c | 3 +--
2 files changed, 1 insertion(+), 3 deletions(-)
--- linux-2.6.16-rc6-mm2-full/include/net/scm.h.old 2006-03-18 18:48:20.000000000 +0100
+++ linux-2.6.16-rc6-mm2-full/include/net/scm.h 2006-03-18 18:48:25.000000000 +0100
@@ -24,7 +24,6 @@
unsigned long seq; /* Connection seqno */
};
-extern void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm);
extern void scm_detach_fds_compat(struct msghdr *msg, struct scm_cookie *scm);
extern void __scm_destroy(struct scm_cookie *scm);
extern struct scm_fp_list * scm_fp_dup(struct scm_fp_list *fpl);
--- linux-2.6.16-rc6-mm2-full/net/core/scm.c.old 2006-03-18 18:48:35.000000000 +0100
+++ linux-2.6.16-rc6-mm2-full/net/core/scm.c 2006-03-18 18:48:46.000000000 +0100
@@ -210,7 +210,7 @@
return err;
}
-void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm)
+static void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm)
{
struct cmsghdr __user *cm = (struct cmsghdr __user*)msg->msg_control;
@@ -329,5 +329,4 @@
EXPORT_SYMBOL(scm_send);
EXPORT_SYMBOL(scm_recv);
EXPORT_SYMBOL(put_cmsg);
-EXPORT_SYMBOL(scm_detach_fds);
EXPORT_SYMBOL(scm_fp_dup);
On Saturday 18 March 2006 13:40, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
I get the following oops from it 100% of the time (on boot):
Trying to free ramdisk memory ... ----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at fs/buffer.c:1629
invalid opcode: 0000 [1] PREEMPT
last sysfs file: /block/hdc/range
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.16-rc6-mm2 #16
RIP: 0010:[<ffffffff80280d9a>] <ffffffff80280d9a>{block_invalidatepage+202}
RSP: 0000:ffff81005ff07ac8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff810037c09138 RCX: ffff810037c09228
RDX: 0000000000000000 RSI: ffff81005ff07a88 RDI: 0000000000000000
RBP: ffff81005ff07af8 R08: 0000000000000002 R09: ffff81005ff07a99
R10: ffff810037c09138 R11: 0000000000000010 R12: ffff810037c09138
R13: 0000000000001000 R14: ffff810037c09138 R15: ffff810001c34e28
FS: 0000000000000000(0000) GS:ffffffff80690000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00002afbe89a3000 CR3: 000000005fe36000 CR4: 00000000000006e0
Process swapper (pid: 1, threadinfo ffff81005ff06000, task ffff81005ff05530)
Stack: 0000000000000000 ffff810001c34e28 0000000000000002 0000000000000001
ffff810037df47e0 ffffffffffffffff ffff81005ff07b08 ffffffff8027f7b3
ffff81005ff07b28 ffffffff802610d5
Call Trace: <ffffffff8027f7b3>{do_invalidatepage+35}
<ffffffff802610d5>{truncate_complete_page+37} <ffffffff8026154f>{truncate_inode_pages_range+207}
<ffffffff802617c0>{truncate_inode_pages+16} <ffffffff803bac96>{rd_ioctl+86}
<ffffffff8034541d>{blkdev_driver_ioctl+109} <ffffffff80345574>{blkdev_ioctl+164}
<ffffffff8046bb1d>{_spin_unlock_irqrestore+29} <ffffffff8022cdb7>{release_console_sem+423}
<ffffffff8022da48>{vprintk+824} <ffffffff8046bbd3>{_spin_unlock+19}
<ffffffff80284dec>{put_super+44} <ffffffff80284f91>{deactivate_super+145}
<ffffffff8028617b>{block_ioctl+27} <ffffffff80292801>{do_ioctl+49}
<ffffffff80292b1b>{vfs_ioctl+683} <ffffffff80292baa>{sys_ioctl+106}
<ffffffff8069c6d1>{initrd_load+737} <ffffffff80699e1b>{prepare_namespace+139}
<ffffffff8020722c>{init+460} <ffffffff8046bad4>{_spin_unlock_irq+20}
<ffffffff80228b09>{schedule_tail+73} <ffffffff8020a8de>{child_rip+8}
<ffffffff80207060>{init+0} <ffffffff8020a8d6>{child_rip+0}
Code: 0f 0b 68 b9 80 49 80 c2 5d 06 48 8b 5d d8 4c 8b 65 e0 4c 8b
RIP <ffffffff80280d9a>{block_invalidatepage+202} RSP <ffff81005ff07ac8>
<0>Kernel panic - not syncing: Attempted to kill init!
Of course booting with "noinitrd" helps.
Greetings,
Rafael
"Rafael J. Wysocki" <[email protected]> wrote:
>
> On Saturday 18 March 2006 13:40, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
>
> I get the following oops from it 100% of the time (on boot):
>
> Trying to free ramdisk memory ... ----------- [cut here ] --------- [please bite here ] ---------
> Kernel BUG at fs/buffer.c:1629
> invalid opcode: 0000 [1] PREEMPT
> last sysfs file: /block/hdc/range
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.16-rc6-mm2 #16
> RIP: 0010:[<ffffffff80280d9a>] <ffffffff80280d9a>{block_invalidatepage+202}
> RSP: 0000:ffff81005ff07ac8 EFLAGS: 00010246
> RAX: 0000000000000000 RBX: ffff810037c09138 RCX: ffff810037c09228
> RDX: 0000000000000000 RSI: ffff81005ff07a88 RDI: 0000000000000000
> RBP: ffff81005ff07af8 R08: 0000000000000002 R09: ffff81005ff07a99
> R10: ffff810037c09138 R11: 0000000000000010 R12: ffff810037c09138
> R13: 0000000000001000 R14: ffff810037c09138 R15: ffff810001c34e28
> FS: 0000000000000000(0000) GS:ffffffff80690000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 00002afbe89a3000 CR3: 000000005fe36000 CR4: 00000000000006e0
> Process swapper (pid: 1, threadinfo ffff81005ff06000, task ffff81005ff05530)
> Stack: 0000000000000000 ffff810001c34e28 0000000000000002 0000000000000001
> ffff810037df47e0 ffffffffffffffff ffff81005ff07b08 ffffffff8027f7b3
> ffff81005ff07b28 ffffffff802610d5
> Call Trace: <ffffffff8027f7b3>{do_invalidatepage+35}
> <ffffffff802610d5>{truncate_complete_page+37} <ffffffff8026154f>{truncate_inode_pages_range+207}
> <ffffffff802617c0>{truncate_inode_pages+16} <ffffffff803bac96>{rd_ioctl+86}
Yeah, ramdisk does strange things.
That's two. I guess I need to see if Neil left any other little timebombs
in there for us ;)
--- devel/fs/buffer.c~make-address_space_operations-invalidatepage-return-void-fix 2006-03-18 12:52:37.000000000 -0800
+++ devel-akpm/fs/buffer.c 2006-03-18 12:53:04.000000000 -0800
@@ -1624,10 +1624,8 @@ void block_invalidatepage(struct page *p
* The get_block cached value has been unconditionally invalidated,
* so real IO is not possible anymore.
*/
- if (offset == 0) {
- int ret = try_to_release_page(page, 0);
- BUG_ON(!ret);
- }
+ if (offset == 0)
+ try_to_release_page(page, 0);
out:
return;
}
_
Hi all,
Does the current crop of kernel drivers for Emulex HBA's support IP over
FC?
Thanx,
Scott
sleekfreak pirate broadcast
http://sleekfreak.ath.cx:81/
On Saturday 18 March 2006 21:54, Andrew Morton wrote:
> "Rafael J. Wysocki" <[email protected]> wrote:
> >
> > On Saturday 18 March 2006 13:40, Andrew Morton wrote:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
> >
> > I get the following oops from it 100% of the time (on boot):
> >
> > Trying to free ramdisk memory ... ----------- [cut here ] --------- [please bite here ] ---------
> > Kernel BUG at fs/buffer.c:1629
> > invalid opcode: 0000 [1] PREEMPT
> > last sysfs file: /block/hdc/range
> > CPU 0
> > Modules linked in:
> > Pid: 1, comm: swapper Not tainted 2.6.16-rc6-mm2 #16
> > RIP: 0010:[<ffffffff80280d9a>] <ffffffff80280d9a>{block_invalidatepage+202}
> > RSP: 0000:ffff81005ff07ac8 EFLAGS: 00010246
> > RAX: 0000000000000000 RBX: ffff810037c09138 RCX: ffff810037c09228
> > RDX: 0000000000000000 RSI: ffff81005ff07a88 RDI: 0000000000000000
> > RBP: ffff81005ff07af8 R08: 0000000000000002 R09: ffff81005ff07a99
> > R10: ffff810037c09138 R11: 0000000000000010 R12: ffff810037c09138
> > R13: 0000000000001000 R14: ffff810037c09138 R15: ffff810001c34e28
> > FS: 0000000000000000(0000) GS:ffffffff80690000(0000) knlGS:0000000000000000
> > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> > CR2: 00002afbe89a3000 CR3: 000000005fe36000 CR4: 00000000000006e0
> > Process swapper (pid: 1, threadinfo ffff81005ff06000, task ffff81005ff05530)
> > Stack: 0000000000000000 ffff810001c34e28 0000000000000002 0000000000000001
> > ffff810037df47e0 ffffffffffffffff ffff81005ff07b08 ffffffff8027f7b3
> > ffff81005ff07b28 ffffffff802610d5
> > Call Trace: <ffffffff8027f7b3>{do_invalidatepage+35}
> > <ffffffff802610d5>{truncate_complete_page+37} <ffffffff8026154f>{truncate_inode_pages_range+207}
> > <ffffffff802617c0>{truncate_inode_pages+16} <ffffffff803bac96>{rd_ioctl+86}
>
> Yeah, ramdisk does strange things.
>
> That's two. I guess I need to see if Neil left any other little timebombs
> in there for us ;)
>
> --- devel/fs/buffer.c~make-address_space_operations-invalidatepage-return-void-fix 2006-03-18 12:52:37.000000000 -0800
> +++ devel-akpm/fs/buffer.c 2006-03-18 12:53:04.000000000 -0800
> @@ -1624,10 +1624,8 @@ void block_invalidatepage(struct page *p
> * The get_block cached value has been unconditionally invalidated,
> * so real IO is not possible anymore.
> */
> - if (offset == 0) {
> - int ret = try_to_release_page(page, 0);
> - BUG_ON(!ret);
> - }
> + if (offset == 0)
> + try_to_release_page(page, 0);
> out:
> return;
> }
> _
That helps, thanks.
Wonder if this is related to rc6's oops?
gcc 4.0.3
CC [M] arch/i386/kernel/cpu/cpufreq/speedstep-centrino.o
arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c: In function
'centrino_target':
include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is used
uninitialized in this function
CC [M] arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.o
arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c: In function
'acpi_cpufreq_target':
include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is used
uninitialized in this function
config here:
http://ck.kolivas.org/crap/lapconfig
Con
On Sunday 19 March 2006 12:09, Con Kolivas wrote:
> Wonder if this is related to rc6's oops?
> gcc 4.0.3
>
> CC [M] arch/i386/kernel/cpu/cpufreq/speedstep-centrino.o
> arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c: In function
> 'centrino_target':
> include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is used
> uninitialized in this function
> CC [M] arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.o
> arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c: In function
> 'acpi_cpufreq_target':
> include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is used
> uninitialized in this function
>
> config here:
> http://ck.kolivas.org/crap/lapconfig
Sorry wrong one:
http://ck.kolivas.org/crap/lap_config
Con
Con Kolivas <[email protected]> wrote:
>
> Wonder if this is related to rc6's oops?
> gcc 4.0.3
>
> CC [M] arch/i386/kernel/cpu/cpufreq/speedstep-centrino.o
> arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c: In function
> 'centrino_target':
> include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is used
> uninitialized in this function
> CC [M] arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.o
> arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c: In function
> 'acpi_cpufreq_target':
> include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is used
> uninitialized in this function
Well conceivably. That warning is a consequence of my quick hack to make
the ACPI tree compile on uniprocessor.
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/broken-out/git-acpi-up-fix.patch
My patch is, as the compiler points out, wrong.
I've sent that patch two or three times to the APCI maintainers, to the
ACPI mailing list and to the author of the original buggy patch. The
response thus far has been dead silence.
IOW, despite my efforts, the ACPI tree has been in a non-compiling state on
uniprocessor since February 11.
This is pathetic. People are trying to get things done here and ACPI is
getting in the way. But *need* to get the ACPI development tree out for
people to test else we'll never be able to take another ACPI update into
mainline.
On Sat, 2006-03-18 at 18:25 +0100, Adrian Bunk wrote:
> On Sat, Mar 18, 2006 at 04:40:56AM -0800, Andrew Morton wrote:
> >...
> > Changes since 2.6.16-rc6-mm1:
> >...
> > git-infiniband.patch
> >...
> > git trees.
> >...
>
> I'm not exactly happy that this tree adds tons of RDMA CM
> EXPORT_SYMBOL's that are neither currently used nor _GPL.
I apologize in advance for my ignorance, but I don't understand how 'new
symbols' could pass the test of 'currently used'.
> cu
> Adrian
>
On Sat, 2006-03-18 at 19:44 -0600, Tom Tucker wrote:
> I apologize in advance for my ignorance, but I don't understand how
> 'new symbols' could pass the test of 'currently used'.
>
Normally when adding new exports you would submit the code that uses
them at the same time.
Lee
On Sunday 19 March 2006 12:35, Andrew Morton wrote:
> Con Kolivas <[email protected]> wrote:
> > Wonder if this is related to rc6's oops?
> > gcc 4.0.3
> >
> > CC [M] arch/i386/kernel/cpu/cpufreq/speedstep-centrino.o
> > arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c: In function
> > 'centrino_target':
> > include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is
> > used uninitialized in this function
> > CC [M] arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.o
> > arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c: In function
> > 'acpi_cpufreq_target':
> > include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is
> > used uninitialized in this function
>
> Well conceivably. That warning is a consequence of my quick hack to make
> the ACPI tree compile on uniprocessor.
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.
>6.16-rc6-mm2/broken-out/git-acpi-up-fix.patch
>
> My patch is, as the compiler points out, wrong.
>
> I've sent that patch two or three times to the APCI maintainers, to the
> ACPI mailing list and to the author of the original buggy patch. The
> response thus far has been dead silence.
Well this will end up being the wrong place to do it but I needed it to work
now so this patch fixes it for me. Dunno what else it will break. Works on
a couple of configs fine.
Cheers,
Con
---
Hacky workaround for cpu_online_map not being defined
arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 --
arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c | 2 --
kernel/sched.c | 4 ++++
3 files changed, 4 insertions(+), 4 deletions(-)
Index: linux-2.6.16-rc6-mm2/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
===================================================================
--- linux-2.6.16-rc6-mm2.orig/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c 2006-03-19 11:15:05.000000000 +1100
+++ linux-2.6.16-rc6-mm2/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c 2006-03-19 12:45:56.000000000 +1100
@@ -225,10 +225,8 @@ acpi_cpufreq_target (
freqs.old = data->freq_table[cur_state].frequency;
freqs.new = data->freq_table[next_state].frequency;
-#ifdef CONFIG_SMP
/* cpufreq holds the hotplug lock, so we are safe from here on */
cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
-#endif
for_each_cpu_mask(j, online_policy_cpus) {
freqs.cpu = j;
Index: linux-2.6.16-rc6-mm2/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
===================================================================
--- linux-2.6.16-rc6-mm2.orig/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2006-03-19 11:15:05.000000000 +1100
+++ linux-2.6.16-rc6-mm2/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2006-03-19 12:45:42.000000000 +1100
@@ -652,10 +652,8 @@ static int centrino_target (struct cpufr
return -EINVAL;
}
-#ifdef CONFIG_SMP
/* cpufreq holds the hotplug lock, so we are safe from here on */
cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
-#endif
saved_mask = current->cpus_allowed;
first_cpu = 1;
Index: linux-2.6.16-rc6-mm2/kernel/sched.c
===================================================================
--- linux-2.6.16-rc6-mm2.orig/kernel/sched.c 2006-03-19 13:25:25.000000000 +1100
+++ linux-2.6.16-rc6-mm2/kernel/sched.c 2006-03-19 13:25:36.000000000 +1100
@@ -6366,6 +6366,10 @@ void __init sched_init_smp(void)
init_sched_domain_sysctl();
}
#else
+/* bitmap of online cpus */
+cpumask_t cpu_online_map __read_mostly;
+EXPORT_SYMBOL(cpu_online_map);
+
void __init sched_init_smp(void)
{
}
On Sat, Mar 18, 2006 at 05:35:12PM -0800, Andrew Morton wrote:
> Con Kolivas <[email protected]> wrote:
> >
> > Wonder if this is related to rc6's oops?
> > gcc 4.0.3
> >
> > CC [M] arch/i386/kernel/cpu/cpufreq/speedstep-centrino.o
> > arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c: In function
> > 'centrino_target':
> > include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is used
> > uninitialized in this function
> > CC [M] arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.o
> > arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c: In function
> > 'acpi_cpufreq_target':
> > include/linux/bitmap.h:170: warning: 'online_policy_cpus.bits[0]' is used
> > uninitialized in this function
>
> Well conceivably. That warning is a consequence of my quick hack to make
> the ACPI tree compile on uniprocessor.
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/broken-out/git-acpi-up-fix.patch
>
> My patch is, as the compiler points out, wrong.
>
> I've sent that patch two or three times to the APCI maintainers, to the
> ACPI mailing list and to the author of the original buggy patch. The
> response thus far has been dead silence.
>
> IOW, despite my efforts, the ACPI tree has been in a non-compiling state on
> uniprocessor since February 11.
>
> This is pathetic. People are trying to get things done here and ACPI is
> getting in the way.
Oops. Sorry. It is me who dropped the ball here. I somehow assumed that
your original patch fixed the issue and didn't look at the actual code.
Here is the patch against mm.
Thanks,
Venki
Fix the UP build breakage in acpi-cpufreq and speedstep-centrino due to
previous p-state software coordination patch.
Signed-off-by: Venkatesh Pallipadi <[email protected]>
diff -purN linux-2.6.15/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c linux-2.6.15-new/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
--- linux-2.6.15/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c 2006-03-18 19:41:25.000000000 -0800
+++ linux-2.6.15-new/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c 2006-03-18 19:48:10.000000000 -0800
@@ -225,9 +225,11 @@ acpi_cpufreq_target (
freqs.old = data->freq_table[cur_state].frequency;
freqs.new = data->freq_table[next_state].frequency;
-#ifdef CONFIG_SMP
+#ifdef CONFIG_HOTPLUG_CPU
/* cpufreq holds the hotplug lock, so we are safe from here on */
cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
+#else
+ online_policy_cpus = policy->cpus;
#endif
for_each_cpu_mask(j, online_policy_cpus) {
diff -purN linux-2.6.15/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c linux-2.6.15-new/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
--- linux-2.6.15/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2006-03-18 19:41:25.000000000 -0800
+++ linux-2.6.15-new/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2006-03-18 19:47:46.000000000 -0800
@@ -652,9 +652,11 @@ static int centrino_target (struct cpufr
return -EINVAL;
}
-#ifdef CONFIG_SMP
+#ifdef CONFIG_HOTPLUG_CPU
/* cpufreq holds the hotplug lock, so we are safe from here on */
cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
+#else
+ online_policy_cpus = policy->cpus;
#endif
saved_mask = current->cpus_allowed;
On Sat, 18 Mar 2006, Andrew Morton wrote:
> SCSI fixes
>
> +areca-raid-linux-scsi-driver-update4.patch
>
> Update areca-raid-linux-scsi-driver.patch
Has anyone had a chance to review this new update to see if it now passes
muster for mainline inclusion?
As a owner of Areca hardware I sure appreciate the responsiveness and work
they have done in respects to Linux support. Thanks to Randy, Christoph,
Randy and others for their work as well!
Dax Kelson
===========
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/broken-out/areca-raid-linux-scsi-driver.patch
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/broken-out/areca-raid-linux-scsi-driver-update4.patch
From: Erich Chen <[email protected]>
1- remove internal queueing
2- remove odd ioctls
3- remove useless forward prototypes
4- give types like ACB useful names
5- give variable useful names, especially follow kernel conventions,
e.g. a struct pci_dev is usually named pdev
6- kill ->proc_info method
7- use normal comment style even for comments not fitting into the
kernel-doc item above. kill useless separator comments without
text
8- convert arcmsr_show_firmware_info to useful one value per
file attributes.
9- convert arcmsr_show_driver_state to useful one value per
file attributes.
10- remove never called release method in the host template
11- remove shutdown notifier, add pci_driver ->shutdown method instead
12- remove CameCase PCI Ids. The vendor Id should go into pci_ids.h,
the device ids either removed or spelled the normal linux way
13- arcmsr_do_interrupt should stop walking the global host list
and use the private data passed to request_irq
14- the global host list go away completely
15- locking to be redone.
16- arcmsr_device_probe rewritten to do goto-based
error unwinding.
17- remove msi options
18- remove arcmsr_scsi_host_template_init
19- the hardware documentation move from arcmsr.h
into a separate file (Documentation/scsi/arcmsr_spec.txt)
20- remove the SCSISTAT_* defines
21- split arcmsr.c into arcmsr_attr.c from arcmsr_hba.c
Andrew Morton wrote (ao):
> - Lots of MD and DM updates
I would like to report that growing an online raid5 device works like a
charm:
mdadm --version
mdadm - v2.4-pre1 - Not For Production Use - 20 March 2006
mdadm -C -l5 -n3 /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1
While performing:
for i in `seq 4`
do dd if=/dev/zero of=bigfile.$i bs=1024k count=10000
done
md5sum bigfile.*
I do:
mdadm /dev/md0 -a /dev/sdd1
mdadm --grow /dev/md0 --raid-disks=4
When the dd and md5sum finishes, I umount and:
e2fsck -f /dev/md0
resize2fs -p /dev/md0
After mounting again the disk indeed is bigger, and the md5sum still
matches.
FWIW, I now try to add four more spares at once, and grow the raid5
again. It seems to work:
# mdadm /dev/md0 -a /dev/sde1 /dev/sdf1 /dev/sdg1 /dev/sdh1
mdadm: added /dev/sde1
mdadm: added /dev/sdf1
mdadm: added /dev/sdg1
mdadm: added /dev/sdh1
# mdadm --grow /dev/md0 --raid-disks=8
mdadm: Need to backup 448K of critical section..
mdadm: ... critical section passed.
#
It is still reshapeing ATM.
Thanks!
Sander
--
Humilis IT Services and Solutions
http://www.humilis.net
Not at this time.... It's on the futures list, though.
-- james s
-------- Forwarded Message --------
From: shogunx <[email protected]>
To: [email protected]
Subject: Emulex IP over FC support.
Date: Sat, 18 Mar 2006 16:25:59 -0500 (EST)
Hi all,
Does the current crop of kernel drivers for Emulex HBA's support IP over
FC?
Thanx,
Scott
sleekfreak pirate broadcast
http://sleekfreak.ath.cx:81/
Hi all,
While sata_mv in 2.6.16-rc6-mm2 seems stable (yah!) compared to
2.6.16-rc6 (no crashes, no data corruption), I still get these messages:
[ 3962.139906] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 3962.139959] ata5: status=0xd0 { Busy }
[ 6105.948045] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 6105.948097] ata6: status=0xd0 { Busy }
[ 7981.164936] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 7981.164991] ata5: status=0xd0 { Busy }
[ 8273.951019] ata7: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 8273.951072] ata7: status=0xd0 { Busy }
[ 9903.032350] ata8: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
[ 9903.032402] ata8: status=0xd0 { Busy }
I'm not entirely sure this is only happens on sata_mv (Marvell
MV88SX6081) as out of eight disks only one is connected to the onboard
sata_nv (nVidia) and the error doesn't happen very often. But I'll keep
an eye on it.
Are these messages somehow dangerous or otherwise indicating a
potentional serious problem? A google search came up with a few links,
but none of them helped me understand the messages.
Thanks!
Sander
--
Humilis IT Services and Solutions
http://www.humilis.net
Sander wrote:
> Hi all,
>
> While sata_mv in 2.6.16-rc6-mm2 seems stable (yah!) compared to
> 2.6.16-rc6 (no crashes, no data corruption), I still get these messages:
>
> [ 3962.139906] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 3962.139959] ata5: status=0xd0 { Busy }
>
> [ 6105.948045] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 6105.948097] ata6: status=0xd0 { Busy }
>
> [ 7981.164936] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 7981.164991] ata5: status=0xd0 { Busy }
>
> [ 8273.951019] ata7: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 8273.951072] ata7: status=0xd0 { Busy }
>
> [ 9903.032350] ata8: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> [ 9903.032402] ata8: status=0xd0 { Busy }
>
>
> I'm not entirely sure this is only happens on sata_mv (Marvell
> MV88SX6081) as out of eight disks only one is connected to the onboard
> sata_nv (nVidia) and the error doesn't happen very often. But I'll keep
> an eye on it.
>
> Are these messages somehow dangerous or otherwise indicating a
> potentional serious problem? A google search came up with a few links,
> but none of them helped me understand the messages.
Without answering your specific question, just remember that sata_mv is
considerly "highly experimental" right now, and still needs some
workarounds for hardware errata.
For now, the goal is a system that doesn't crash and doesn't corrupt
data. If its occasionally slow or spits out a few errors, but otherwise
still works, that's pretty darned good :)
Jeff
On Mon, Mar 20, 2006 at 08:02:06PM -0500, Jeff Garzik wrote:
> Sander wrote:
> >Hi all,
> >
> >While sata_mv in 2.6.16-rc6-mm2 seems stable (yah!) compared to
> >2.6.16-rc6 (no crashes, no data corruption), I still get these messages:
> >
> >[ 3962.139906] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> >0xb/47/00
> >[ 3962.139959] ata5: status=0xd0 { Busy }
> >
> >[ 6105.948045] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> >0xb/47/00
> >[ 6105.948097] ata6: status=0xd0 { Busy }
> >
> >[ 7981.164936] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> >0xb/47/00
> >[ 7981.164991] ata5: status=0xd0 { Busy }
> >
> >[ 8273.951019] ata7: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> >0xb/47/00
> >[ 8273.951072] ata7: status=0xd0 { Busy }
> >
> >[ 9903.032350] ata8: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> >0xb/47/00
> >[ 9903.032402] ata8: status=0xd0 { Busy }
> >
> >
> >I'm not entirely sure this is only happens on sata_mv (Marvell
> >MV88SX6081) as out of eight disks only one is connected to the onboard
> >sata_nv (nVidia) and the error doesn't happen very often. But I'll keep
> >an eye on it.
> >
> >Are these messages somehow dangerous or otherwise indicating a
> >potentional serious problem? A google search came up with a few links,
> >but none of them helped me understand the messages.
>
> Without answering your specific question, just remember that sata_mv is
> considerly "highly experimental" right now, and still needs some
> workarounds for hardware errata.
>
> For now, the goal is a system that doesn't crash and doesn't corrupt
> data. If its occasionally slow or spits out a few errors, but otherwise
> still works, that's pretty darned good :)
Reminds me, this message (though different error codes) gets spewed to the
console a lot when haldaemon polls SATA CD drives.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=183348
This wasn't occasional, this was every few seconds, making the box
pretty much unusable.
Dave
--
http://www.codemonkey.org.uk
Dave Jones wrote:
> On Mon, Mar 20, 2006 at 08:02:06PM -0500, Jeff Garzik wrote:
> > Sander wrote:
> > >Hi all,
> > >
> > >While sata_mv in 2.6.16-rc6-mm2 seems stable (yah!) compared to
> > >2.6.16-rc6 (no crashes, no data corruption), I still get these messages:
> > >
> > >[ 3962.139906] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> > >0xb/47/00
> > >[ 3962.139959] ata5: status=0xd0 { Busy }
> > >
> > >[ 6105.948045] ata6: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> > >0xb/47/00
> > >[ 6105.948097] ata6: status=0xd0 { Busy }
> > >
> > >[ 7981.164936] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> > >0xb/47/00
> > >[ 7981.164991] ata5: status=0xd0 { Busy }
> > >
> > >[ 8273.951019] ata7: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> > >0xb/47/00
> > >[ 8273.951072] ata7: status=0xd0 { Busy }
> > >
> > >[ 9903.032350] ata8: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> > >0xb/47/00
> > >[ 9903.032402] ata8: status=0xd0 { Busy }
> > >
> > >
> > >I'm not entirely sure this is only happens on sata_mv (Marvell
> > >MV88SX6081) as out of eight disks only one is connected to the onboard
> > >sata_nv (nVidia) and the error doesn't happen very often. But I'll keep
> > >an eye on it.
> > >
> > >Are these messages somehow dangerous or otherwise indicating a
> > >potentional serious problem? A google search came up with a few links,
> > >but none of them helped me understand the messages.
> >
> > Without answering your specific question, just remember that sata_mv is
> > considerly "highly experimental" right now, and still needs some
> > workarounds for hardware errata.
> >
> > For now, the goal is a system that doesn't crash and doesn't corrupt
> > data. If its occasionally slow or spits out a few errors, but otherwise
> > still works, that's pretty darned good :)
>
> Reminds me, this message (though different error codes) gets spewed to the
> console a lot when haldaemon polls SATA CD drives.
> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=183348
Yeah, libata is way too noisy on ATAPI. In ATA, errors were rare so you
needed all the info. In ATAPI, some "errors" are expected, and simply
reported back to the application. Unfortunately, the solution is
observation and iteration:
Console spews messages. Users yell, and paste said messages. Observe
ATAPI behavior and return codes, and adjust libata. Repeat.
As an aside, most recent SATA cd/dvd drives support "asynchronous
notification", which means you don't have the poll the drive. HAL needs
to support that.
> This wasn't occasional, this was every few seconds, making the box
> pretty much unusable.
The entire box or just the console?
Jeff
Jeff Garzik wrote:
>
> Without answering your specific question, just remember that sata_mv is
> considerly "highly experimental" right now, and still needs some
> workarounds for hardware errata.
>
> For now, the goal is a system that doesn't crash and doesn't corrupt
> data. If its occasionally slow or spits out a few errors, but otherwise
> still works, that's pretty darned good :)
I'm currently working with the original authors of sata_mv, and have taken
over maintenance of it for now. It should progress from "highly experimental"
to "production quality" over the next month or so.
The (mucho) updated driver I'm using here now is already much improved
in many ways. At some point, I'll break it out into patches for Jeff.
But there's one MAJOR bugfix patch that I'll release here shortly,
to go with the interrupt handler fix already posted.
Cheers
Mark
Jeff Garzik wrote (ao):
> Sander wrote:
> >While sata_mv in 2.6.16-rc6-mm2 seems stable (yah!) compared to
> >2.6.16-rc6 (no crashes, no data corruption), I still get these messages:
> >
> >[ 3962.139906] ata5: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ
> >0xb/47/00
> >[ 3962.139959] ata5: status=0xd0 { Busy }
> >I'm not entirely sure this is only happens on sata_mv (Marvell
> >MV88SX6081) as out of eight disks only one is connected to the onboard
> >sata_nv (nVidia) and the error doesn't happen very often. But I'll keep
> >an eye on it.
> >
> >Are these messages somehow dangerous or otherwise indicating a
> >potentional serious problem? A google search came up with a few links,
> >but none of them helped me understand the messages.
>
> Without answering your specific question, just remember that sata_mv is
> considerly "highly experimental" right now, and still needs some
> workarounds for hardware errata.
>
> For now, the goal is a system that doesn't crash and doesn't corrupt
> data. If its occasionally slow or spits out a few errors, but
> otherwise still works, that's pretty darned good :)
I fully agree!
I am aware that sata_mv is early beta, and kernel 2.6.16-rc6-mm2 is
actually the first kernel which lets me really use my Marvell
controller (users should give feedback on that right ;-). Kudos to you
all! (I don't know what happened between -rc6 and -rc6-mm2).
I know quite some people have their Marvell controller on a shelf
because they could not get it to work reliably. Now they can give it
another try..
Btw, without the hardware errata workarounds implemented yet, will it
eventually corrupt data for a fact? Are there any tests which will
trigger bugs, other than my simple dd-over-raid5?
Sander
--
Humilis IT Services and Solutions
http://www.humilis.net
Mark Lord wrote (ao):
> Jeff Garzik wrote:
> >For now, the goal is a system that doesn't crash and doesn't corrupt
> >data. If its occasionally slow or spits out a few errors, but
> >otherwise still works, that's pretty darned good :)
>
> I'm currently working with the original authors of sata_mv, and have
> taken over maintenance of it for now. It should progress from "highly
> experimental" to "production quality" over the next month or so.
Thanks a lot :-)
> The (mucho) updated driver I'm using here now is already much improved
> in many ways. At some point, I'll break it out into patches for Jeff.
>
> But there's one MAJOR bugfix patch that I'll release here shortly, to
> go with the interrupt handler fix already posted.
I've actually a patched kernel ready to test your patch. Only need to
boot the server, so will do that this afternoon and report back.
Sander
--
Humilis IT Services and Solutions
http://www.humilis.net
On Mon, 2006-03-20 at 21:35 -0500, Jeff Garzik wrote:
> Dave Jones wrote:
> > This wasn't occasional, this was every few seconds, making the box
> > pretty much unusable.
>
> The entire box or just the console?
Just the console.
--
Peter
Mark Lord wrote:
> Jeff Garzik wrote:
>>
>> Without answering your specific question, just remember that sata_mv
>> is considerly "highly experimental" right now, and still needs some
>> workarounds for hardware errata.
>>
>> For now, the goal is a system that doesn't crash and doesn't corrupt
>> data. If its occasionally slow or spits out a few errors, but
>> otherwise still works, that's pretty darned good :)
>
> I'm currently working with the original authors of sata_mv, and have taken
> over maintenance of it for now. It should progress from "highly
> experimental"
> to "production quality" over the next month or so.
>
> The (mucho) updated driver I'm using here now is already much improved
> in many ways. At some point, I'll break it out into patches for Jeff.
>
> But there's one MAJOR bugfix patch that I'll release here shortly,
> to go with the interrupt handler fix already posted.
This is great news. Is there any relationship between the development of
this driver and the one maintained by Marvell that's available from
their web site ? Their latest version (3.6.1) is released under the GPL,
and is a very solid driver based our experience with it over the past
few years, though it's targeted at older versions of the linux kernel
and needs some porting to 2.6.16 (and contains redundant stuff like its
own scsi-ata layer).
Denis Leroy
Denis Leroy wrote:
> This is great news. Is there any relationship between the development of
> this driver and the one maintained by Marvell that's available from
> their web site ? Their latest version (3.6.1) is released under the GPL,
> and is a very solid driver based our experience with it over the past
> few years, though it's targeted at older versions of the linux kernel
> and needs some porting to 2.6.16 (and contains redundant stuff like its
> own scsi-ata layer).
There is a we-use-that-driver-as-documentation-sometimes relationship.
It's quite un-Linux for a Linux driver, and others have reported that
sata_mv in its current state is more stable for them than the Marvell
behemoth GPL driver.
Jeff
Denis Leroy wrote:
>
> This is great news. Is there any relationship between the development of
> this driver and the one maintained by Marvell that's available from
> their web site ? Their latest version (3.6.1) is released under the GPL,
>
No relationship, other than that I plan to look through their driver
for more clues to how they handle certain errata and stuff.
My employer for this project has fairly detailed information
from Marvell as well.
Cheers
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc6-mm2
# Mon Mar 20 00:33:05 2006
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_DOUBLEFAULT=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hdb6"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SCI_EMULATE is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
# CONFIG_HOSTAP is not set
# CONFIG_ACX is not set
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_CX25840 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7127 is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
# CONFIG_EDAC_E752X is not set
CONFIG_EDAC_I82875P=m
# CONFIG_EDAC_I82860 is not set
CONFIG_EDAC_R82600=m
CONFIG_EDAC_POLL=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
CONFIG_REISER4_DEBUG=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
CONFIG_UNWIND_INFO=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_STACK_BACKTRACE_COLS=1
#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_INITDATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
Le 21.03.2006 21:27, Laurent Riffard a ?crit :
> Le 18.03.2006 13:40, Andrew Morton a ?crit :
>
>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
>
>
> Hello,
>
> This BUG is 100% reproducible. Simply boot to runlevel 1 and then
> unmount a reiser4 fs:
Oops! Somebody already reported it: http://lkml.org/lkml/2006/3/21/88.
Sorry for the noise...
--
laurent
On Sat, Mar 18, 2006 at 04:40:56AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.16-rc6-mm1:
>...
> +page-migration-reorg.patch
>...
> Reorganise the page migration code
>...
The patch description includes:
5. Make it possible to configure NUMA systems without page migration
and non-NUMA systems with page migration.
I don't see the point in making this option visible for the majority of
users on non-NUMA systems who will never need it.
When is it required on non-NUMA systems?
Memory hotplug?
Can we express this explicitely?
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Tue, 21 Mar 2006, Adrian Bunk wrote:
> 5. Make it possible to configure NUMA systems without page migration
> and non-NUMA systems with page migration.
>
>
> I don't see the point in making this option visible for the majority of
> users on non-NUMA systems who will never need it.
>
> When is it required on non-NUMA systems?
> Memory hotplug?
That is one. It also may be useful for transferring pages between various
zones. Could be used to free up space in ZONE_DMA etc. Right now none of
these uses exist so we could disable it by default for now?
On Tue, 21 Mar 2006, Adrian Bunk wrote:
> Can we express this explicitely?
How about this fix?
Make page migration dependent on swap and NUMA. The page migration code
could function without NUMA but we currently have no users for the
non-NUMA case.
Signed-off-by: Christoph Lameter <[email protected]>
Index: linux-2.6.16-rc6-mm2/mm/Kconfig
===================================================================
--- linux-2.6.16-rc6-mm2.orig/mm/Kconfig 2006-03-21 14:51:37.000000000 -0800
+++ linux-2.6.16-rc6-mm2/mm/Kconfig 2006-03-21 15:36:25.000000000 -0800
@@ -138,8 +138,8 @@ config SPLIT_PTLOCK_CPUS
#
config MIGRATION
bool "Page migration"
- def_bool y if NUMA || SPARSEMEM || DISCONTIGMEM
- depends on SWAP
+ def_bool y if NUMA
+ depends on SWAP && NUMA
help
Allows the migration of the physical location of pages of processes
while the virtual addresses are not changed. This is useful for
On Sun, 19 Mar 2006, Dax Kelson wrote:
> On Sat, 18 Mar 2006, Andrew Morton wrote:
> > SCSI fixes
> >
> > +areca-raid-linux-scsi-driver-update4.patch
> >
> > Update areca-raid-linux-scsi-driver.patch
>
> Has anyone had a chance to review this new update to see if it now passes
> muster for mainline inclusion?
Unfortunately when the new driver is applied to 2.6.15.6 a bonnie++ test
results in the following endless spew:
...
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
...
I have emailed the details to Erich.
Chris
On Tue, Mar 21, 2006 at 11:49:32PM +0000, Chris Caputo wrote:
> On Sun, 19 Mar 2006, Dax Kelson wrote:
> > On Sat, 18 Mar 2006, Andrew Morton wrote:
> > > SCSI fixes
> > >
> > > +areca-raid-linux-scsi-driver-update4.patch
> > >
> > > Update areca-raid-linux-scsi-driver.patch
> >
> > Has anyone had a chance to review this new update to see if it now passes
> > muster for mainline inclusion?
>
> Unfortunately when the new driver is applied to 2.6.15.6 a bonnie++ test
> results in the following endless spew:
Curious... I didn't encounter this phenomena, but then, my 0.75 TB
raid5 volume is practically empty...
For the development phase it would be most useful, if the driver
would be available in similar "this will compile for your currently
running kernel, or some other you care to name and have its config.h
files at hand" as e.g. Nvidia drivers are (except that arcmsr is
in "all source form", whereas NV has this magic object blob..)
Such would allow (at least for me) to have a wee bit faster cycle
with "pick vendor kernel, add this and that custom module"
I was apalled to learn that full cycle kernel compilation takes
_hours_ these days (Pentium-4 HT, 2.4 GHz, 2 GB memory -- and it
is about as slow as my first kernel compilation experience with
a 386/33MHz way back in ...)
> ...
> attempt to access beyond end of device
> sdb1: rw=0, want=134744080, limit=128002016
> ...
>
> I have emailed the details to Erich.
>
> Chris
/Matti Aarnio
On Wed, 22 Mar 2006 05:37:18 +0200 Matti Aarnio wrote:
>
> I was apalled to learn that full cycle kernel compilation takes
> _hours_ these days (Pentium-4 HT, 2.4 GHz, 2 GB memory -- and it
> is about as slow as my first kernel compilation experience with
> a 386/33MHz way back in ...)
You mean allmodconfig or allyesconfig, right?
Yes, it does take a l o n g time.
---
~Randy
On Tue, Mar 21, 2006 at 07:56:26PM -0800, Randy.Dunlap wrote:
> On Wed, 22 Mar 2006 05:37:18 +0200 Matti Aarnio wrote:
>
>
> >
> > I was apalled to learn that full cycle kernel compilation takes
> > _hours_ these days (Pentium-4 HT, 2.4 GHz, 2 GB memory -- and it
> > is about as slow as my first kernel compilation experience with
> > a 386/33MHz way back in ...)
>
> You mean allmodconfig or allyesconfig, right?
> Yes, it does take a l o n g time.
Kill CONFIG_DEBUG_INFO and it'll go much faster...
Dear All,
I had met this problem at my Fab before.
But this problem seem not came from the issue of driver version change.
I had test it with my older version of areca driver and it cause same
problem.
I did this testing with EXT2 file system and I got dump messages as
following message.
But When I used EXT3 file system and run same testing, it worked fine.
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
attempt to access beyond end of device
sdb1: rw=0, want=134744080, limit=128002016
Now I have time to research this problem.
Hope that I can give you more information about it.
Best Regards
Erich Chen
----- Original Message -----
From: "Matti Aarnio" <[email protected]>
To: "Chris Caputo" <[email protected]>
Cc: "Dax Kelson" <[email protected]>; <[email protected]>;
<[email protected]>
Sent: Wednesday, March 22, 2006 11:37 AM
Subject: Re: New Areca driver in 2.6.16-rc6-mm2
> On Tue, Mar 21, 2006 at 11:49:32PM +0000, Chris Caputo wrote:
>> On Sun, 19 Mar 2006, Dax Kelson wrote:
>> > On Sat, 18 Mar 2006, Andrew Morton wrote:
>> > > SCSI fixes
>> > >
>> > > +areca-raid-linux-scsi-driver-update4.patch
>> > >
>> > > Update areca-raid-linux-scsi-driver.patch
>> >
>> > Has anyone had a chance to review this new update to see if it now
>> > passes
>> > muster for mainline inclusion?
>>
>> Unfortunately when the new driver is applied to 2.6.15.6 a bonnie++ test
>> results in the following endless spew:
>
> Curious... I didn't encounter this phenomena, but then, my 0.75 TB
> raid5 volume is practically empty...
>
> For the development phase it would be most useful, if the driver
> would be available in similar "this will compile for your currently
> running kernel, or some other you care to name and have its config.h
> files at hand" as e.g. Nvidia drivers are (except that arcmsr is
> in "all source form", whereas NV has this magic object blob..)
>
> Such would allow (at least for me) to have a wee bit faster cycle
> with "pick vendor kernel, add this and that custom module"
>
> I was apalled to learn that full cycle kernel compilation takes
> _hours_ these days (Pentium-4 HT, 2.4 GHz, 2 GB memory -- and it
> is about as slow as my first kernel compilation experience with
> a 386/33MHz way back in ...)
>
>> ...
>> attempt to access beyond end of device
>> sdb1: rw=0, want=134744080, limit=128002016
>> ...
>>
>> I have emailed the details to Erich.
>>
>> Chris
>
> /Matti Aarnio
Hello
On Tue, 2006-03-21 at 21:38 +0100, Laurent Riffard wrote:
> Le 21.03.2006 21:27, Laurent Riffard a écrit :
> > Le 18.03.2006 13:40, Andrew Morton a écrit :
> >
> >>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
> >
> >
> > Hello,
> >
> > This BUG is 100% reproducible. Simply boot to runlevel 1 and then
> > unmount a reiser4 fs:
>
The attached patch fixes the problem.
On Sat, 18 Mar 2006 04:40:56 -0800, Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
>
>
> - John's time rework patches were dropped - they're being reworked.
>
> - Lots of MD and DM updates
>
Mmmm, somthing strange is in this kernel. Is hangs the box in the middle
of the night, it looks like it got stuck on the scsi disk on an AHC
controller...I get no info on syslog.
Are there any changes in aic drivers ? It also has a raid array, perhaps
some change in md code is borking when cron jobs are run in the night...
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandriva Linux release 2006.1 (Cooker) for i586
Linux 2.6.15-jam20 (gcc 4.0.3 (4.0.3-1mdk for Mandriva Linux release 2006.1))
"J.A. Magallon" <[email protected]> wrote:
>
> On Sat, 18 Mar 2006 04:40:56 -0800, Andrew Morton <[email protected]> wrote:
>
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
> >
> >
> > - John's time rework patches were dropped - they're being reworked.
> >
> > - Lots of MD and DM updates
> >
>
> Mmmm, somthing strange is in this kernel. Is hangs the box in the middle
> of the night, it looks like it got stuck on the scsi disk on an AHC
> controller...I get no info on syslog.
>
> Are there any changes in aic drivers ? It also has a raid array, perhaps
> some change in md code is borking when cron jobs are run in the night...
diffstat will tell.
b/drivers/scsi/aic7xxx/aic79xx_core.c | 33
b/drivers/scsi/aic7xxx/aic79xx_osm.c | 559
b/drivers/scsi/aic7xxx/aic79xx_osm.h | 7
b/drivers/scsi/aic7xxx/aic7xxx_core.c | 24
b/drivers/scsi/aic7xxx/aic7xxx_osm.c | 45
b/drivers/scsi/aic7xxx/aic7xxx_osm.h | 5
There are large numbers of changes to scsi core as well. And MD. And
everything else.
Can no info be obtained from sysrq-P or sysrq-T?
If it's running X then I'd suggest you quit from X overnight, see if
anything pops up on the screen, and to simplify using sysrq.
On Sat, Mar 18, 2006 at 04:40:56AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.16-rc6-mm1:
>...
> -kernel-timec-remove-unused-pps_-variables.patch
>
> Dropped - being redone.
>...
This patch was unrelated, but seems to have been dropped due to context
changes.
A version that applies against 2.6.16-rc6-mm2 is below.
cu
Adrian
<-- snip -->
From: Adrian Bunk <[email protected]>
AFAIR there is a patch floating around that might use these variables,
but this patch is still unmerged and my patch can easily be undone.
Signed-off-by: Adrian Bunk <[email protected]>
---
include/linux/timex.h | 8 --------
kernel/time.c | 23 ++++++-----------------
2 files changed, 6 insertions(+), 25 deletions(-)
--- linux-2.6.16-rc6-mm2-full/include/linux/timex.h.old 2006-03-21 23:30:45.000000000 +0100
+++ linux-2.6.16-rc6-mm2-full/include/linux/timex.h 2006-03-21 23:31:20.000000000 +0100
@@ -247,19 +247,11 @@
extern long time_next_adjust; /* Value for time_adjust at next tick */
/* interface variables pps->timer interrupt */
-extern long pps_offset; /* pps time offset (us) */
extern long pps_jitter; /* time dispersion (jitter) (us) */
extern long pps_freq; /* frequency offset (scaled ppm) */
extern long pps_stabil; /* frequency dispersion (scaled ppm) */
extern long pps_valid; /* pps signal watchdog counter */
-/* interface variables pps->adjtimex */
-extern int pps_shift; /* interval duration (s) (shift) */
-extern long pps_jitcnt; /* jitter limit exceeded */
-extern long pps_calcnt; /* calibration intervals */
-extern long pps_errcnt; /* calibration errors */
-extern long pps_stbcnt; /* stability limit exceeded */
-
/**
* ntp_clear - Clears the NTP state variables
*
--- linux-2.6.16-rc6-mm2-full/kernel/time.c.old 2006-03-21 23:30:57.000000000 +0100
+++ linux-2.6.16-rc6-mm2-full/kernel/time.c 2006-03-21 23:31:58.000000000 +0100
@@ -202,7 +202,6 @@
return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
}
-long pps_offset; /* pps time offset (us) */
long pps_jitter = MAXTIME; /* time dispersion (jitter) (us) */
long pps_freq; /* frequency offset (scaled ppm) */
@@ -210,16 +209,6 @@
long pps_valid = PPS_VALID; /* pps signal watchdog counter */
-int pps_shift = PPS_SHIFT; /* interval duration (s) (shift) */
-
-long pps_jitcnt; /* jitter limit exceeded */
-long pps_calcnt; /* calibration intervals */
-long pps_errcnt; /* calibration errors */
-long pps_stbcnt; /* stability limit exceeded */
-
-/* hook for a loadable hardpps kernel module */
-void (*hardpps_ptr)(struct timeval *);
-
/* we call this to notify the arch when the clock is being
* controlled. If no such arch routine, do nothing.
*/
@@ -315,7 +304,7 @@
else if ( time_status & (STA_PLL | STA_PPSTIME) ) {
ltemp = (time_status & (STA_PPSTIME | STA_PPSSIGNAL)) ==
(STA_PPSTIME | STA_PPSSIGNAL) ?
- pps_offset : txc->offset;
+ 0 : txc->offset;
/*
* Scale the phase adjustment and
@@ -390,12 +379,12 @@
txc->tick = tick_usec;
txc->ppsfreq = pps_freq;
txc->jitter = pps_jitter >> PPS_AVG;
- txc->shift = pps_shift;
+ txc->shift = 0;
txc->stabil = pps_stabil;
- txc->jitcnt = pps_jitcnt;
- txc->calcnt = pps_calcnt;
- txc->errcnt = pps_errcnt;
- txc->stbcnt = pps_stbcnt;
+ txc->jitcnt = 0;
+ txc->calcnt = 0;
+ txc->errcnt = 0;
+ txc->stbcnt = 0;
write_sequnlock_irq(&xtime_lock);
do_gettimeofday(&txc->time);
notify_arch_cmos_timer();
Le 22.03.2006 08:43, Vladimir V. Saveliev a écrit :
> Hello
> On Tue, 2006-03-21 at 21:38 +0100, Laurent Riffard wrote:
>>Le 21.03.2006 21:27, Laurent Riffard a écrit :
>>
>>>Le 18.03.2006 13:40, Andrew Morton a écrit :
>>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc6/2.6.16-rc6-mm2/
>>>
>>>Hello,
>>>
>>>This BUG is 100% reproducible. Simply boot to runlevel 1 and then
>>>unmount a reiser4 fs:
>>
>
> The attached patch fixes the problem.
Ok, it works fine now.
Thanks.
> ------------------------------------------------------------------------
>
> fs/reiser4/page_cache.c | 4 ----
> 1 files changed, 4 deletions(-)
>
> diff -puN fs/reiser4/page_cache.c~reiser4-fix-bd_inode fs/reiser4/page_cache.c
> --- linux-2.6.16-rc6-mm2/fs/reiser4/page_cache.c~reiser4-fix-bd_inode 2006-03-21 06:42:42.000000000 +0300
> +++ linux-2.6.16-rc6-mm2-vs/fs/reiser4/page_cache.c 2006-03-21 07:21:54.000000000 +0300
> @@ -198,10 +198,6 @@ init_fake_inode(struct super_block *supe
> {
> assert("nikita-2168", fake->i_state & I_NEW);
> fake->i_mapping->a_ops = &formatted_fake_as_ops;
> - fake->i_blkbits = super->s_blocksize_bits;
> - fake->i_size = ~0ull;
> - fake->i_rdev = super->s_bdev->bd_dev;
> - fake->i_bdev = super->s_bdev;
> *pfake = fake;
> /* NOTE-NIKITA something else? */
> unlock_new_inode(fake);
>
> _
--
laurent
Am Mittwoch, 22. M?rz 2006 08:43 schrieb Vladimir V. Saveliev:
> The attached patch fixes the problem.
confirmed, works in 2.6.16-mm1.
regards
Alex
--
Encrypted Mails welcome.
PGP-Key at http://zodiac.dnsalias.org/misc/pgpkey.asc | Key-ID: 0x6D7DD291