From: Peter Tiedemann <[email protected]>
[patch 21/24] s390: remove support for ttys over ctc connections.
The ctctty code never really worked and complicates things in the
ctc driver. Remove it.
Signed-off-by: Peter Tiedemann <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
---
drivers/s390/net/Makefile | 2
drivers/s390/net/ctcmain.c | 43 -
drivers/s390/net/ctcmain.h | 12
drivers/s390/net/ctctty.c | 1259 ---------------------------------------------
drivers/s390/net/ctctty.h | 35 -
5 files changed, 14 insertions(+), 1337 deletions(-)
diff -urpN linux-2.6/drivers/s390/net/ctcmain.c linux-2.6-patched/drivers/s390/net/ctcmain.c
--- linux-2.6/drivers/s390/net/ctcmain.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6-patched/drivers/s390/net/ctcmain.c 2006-03-22 14:36:37.000000000 +0100
@@ -65,7 +65,6 @@
#include <asm/idals.h>
-#include "ctctty.h"
#include "fsm.h"
#include "cu3088.h"
@@ -479,10 +478,7 @@ ctc_unpack_skb(struct channel *ch, struc
skb->dev = pskb->dev;
skb->protocol = pskb->protocol;
pskb->ip_summed = CHECKSUM_UNNECESSARY;
- if (ch->protocol == CTC_PROTO_LINUX_TTY)
- ctc_tty_netif_rx(skb);
- else
- netif_rx_ni(skb);
+ netif_rx_ni(skb);
/**
* Successful rx; reset logflags
*/
@@ -557,8 +553,7 @@ ccw_unit_check(struct channel *ch, unsig
DBF_TEXT(trace, 5, __FUNCTION__);
if (sense & SNS0_INTERVENTION_REQ) {
if (sense & 0x01) {
- if (ch->protocol != CTC_PROTO_LINUX_TTY)
- ctc_pr_debug("%s: Interface disc. or Sel. reset "
+ ctc_pr_debug("%s: Interface disc. or Sel. reset "
"(remote)\n", ch->id);
fsm_event(ch->fsm, CH_EVENT_UC_RCRESET, ch);
} else {
@@ -2034,7 +2029,6 @@ static void
dev_action_chup(fsm_instance * fi, int event, void *arg)
{
struct net_device *dev = (struct net_device *) arg;
- struct ctc_priv *privptr = dev->priv;
DBF_TEXT(trace, 3, __FUNCTION__);
switch (fsm_getstate(fi)) {
@@ -2049,8 +2043,6 @@ dev_action_chup(fsm_instance * fi, int e
fsm_newstate(fi, DEV_STATE_RUNNING);
ctc_pr_info("%s: connected with remote side\n",
dev->name);
- if (privptr->protocol == CTC_PROTO_LINUX_TTY)
- ctc_tty_setcarrier(dev, 1);
ctc_clear_busy(dev);
}
break;
@@ -2059,8 +2051,6 @@ dev_action_chup(fsm_instance * fi, int e
fsm_newstate(fi, DEV_STATE_RUNNING);
ctc_pr_info("%s: connected with remote side\n",
dev->name);
- if (privptr->protocol == CTC_PROTO_LINUX_TTY)
- ctc_tty_setcarrier(dev, 1);
ctc_clear_busy(dev);
}
break;
@@ -2086,14 +2076,10 @@ dev_action_chup(fsm_instance * fi, int e
static void
dev_action_chdown(fsm_instance * fi, int event, void *arg)
{
- struct net_device *dev = (struct net_device *) arg;
- struct ctc_priv *privptr = dev->priv;
DBF_TEXT(trace, 3, __FUNCTION__);
switch (fsm_getstate(fi)) {
case DEV_STATE_RUNNING:
- if (privptr->protocol == CTC_PROTO_LINUX_TTY)
- ctc_tty_setcarrier(dev, 0);
if (event == DEV_EVENT_TXDOWN)
fsm_newstate(fi, DEV_STATE_STARTWAIT_TX);
else
@@ -2397,8 +2383,6 @@ ctc_tx(struct sk_buff *skb, struct net_d
*/
if (fsm_getstate(privptr->fsm) != DEV_STATE_RUNNING) {
fsm_event(privptr->fsm, DEV_EVENT_START, dev);
- if (privptr->protocol == CTC_PROTO_LINUX_TTY)
- return -EBUSY;
dev_kfree_skb(skb);
privptr->stats.tx_dropped++;
privptr->stats.tx_errors++;
@@ -2608,20 +2592,13 @@ ctc_netdev_unregister(struct net_device
if (!dev)
return;
privptr = (struct ctc_priv *) dev->priv;
- if (privptr->protocol != CTC_PROTO_LINUX_TTY)
- unregister_netdev(dev);
- else
- ctc_tty_unregister_netdev(dev);
+ unregister_netdev(dev);
}
static int
ctc_netdev_register(struct net_device * dev)
{
- struct ctc_priv *privptr = (struct ctc_priv *) dev->priv;
- if (privptr->protocol != CTC_PROTO_LINUX_TTY)
- return register_netdev(dev);
- else
- return ctc_tty_register_netdev(dev);
+ return register_netdev(dev);
}
static void
@@ -2667,7 +2644,9 @@ ctc_proto_store(struct device *dev, stru
if (!priv)
return -ENODEV;
sscanf(buf, "%u", &value);
- if ((value < 0) || (value > CTC_PROTO_MAX))
+ if (!((value == CTC_PROTO_S390) ||
+ (value == CTC_PROTO_LINUX) ||
+ (value == CTC_PROTO_OS390)))
return -EINVAL;
priv->protocol = value;
@@ -2897,10 +2876,7 @@ ctc_new_device(struct ccwgroup_device *c
goto out;
}
- if (privptr->protocol == CTC_PROTO_LINUX_TTY)
- strlcpy(dev->name, "ctctty%d", IFNAMSIZ);
- else
- strlcpy(dev->name, "ctc%d", IFNAMSIZ);
+ strlcpy(dev->name, "ctc%d", IFNAMSIZ);
for (direction = READ; direction <= WRITE; direction++) {
privptr->channel[direction] =
@@ -3046,7 +3022,6 @@ ctc_exit(void)
{
DBF_TEXT(setup, 3, __FUNCTION__);
unregister_cu3088_discipline(&ctc_group_driver);
- ctc_tty_cleanup();
ctc_unregister_dbf_views();
ctc_pr_info("CTC driver unloaded\n");
}
@@ -3073,10 +3048,8 @@ ctc_init(void)
ctc_pr_crit("ctc_init failed with ctc_register_dbf_views rc = %d\n", ret);
return ret;
}
- ctc_tty_init();
ret = register_cu3088_discipline(&ctc_group_driver);
if (ret) {
- ctc_tty_cleanup();
ctc_unregister_dbf_views();
}
return ret;
diff -urpN linux-2.6/drivers/s390/net/ctcmain.h linux-2.6-patched/drivers/s390/net/ctcmain.h
--- linux-2.6/drivers/s390/net/ctcmain.h 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6-patched/drivers/s390/net/ctcmain.h 2006-03-22 14:36:37.000000000 +0100
@@ -35,7 +35,9 @@
#include <asm/ccwdev.h>
#include <asm/ccwgroup.h>
-#include "ctctty.h"
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
#include "fsm.h"
#include "cu3088.h"
@@ -50,9 +52,7 @@
#define CTC_PROTO_S390 0
#define CTC_PROTO_LINUX 1
-#define CTC_PROTO_LINUX_TTY 2
#define CTC_PROTO_OS390 3
-#define CTC_PROTO_MAX 3
#define CTC_BUFSIZE_LIMIT 65535
#define CTC_BUFSIZE_DEFAULT 32768
@@ -257,15 +257,13 @@ static __inline__ void
ctc_clear_busy(struct net_device * dev)
{
clear_bit(0, &(((struct ctc_priv *) dev->priv)->tbusy));
- if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY)
- netif_wake_queue(dev);
+ netif_wake_queue(dev);
}
static __inline__ int
ctc_test_and_set_busy(struct net_device * dev)
{
- if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY)
- netif_stop_queue(dev);
+ netif_stop_queue(dev);
return test_and_set_bit(0, &((struct ctc_priv *) dev->priv)->tbusy);
}
diff -urpN linux-2.6/drivers/s390/net/ctctty.c linux-2.6-patched/drivers/s390/net/ctctty.c
--- linux-2.6/drivers/s390/net/ctctty.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6-patched/drivers/s390/net/ctctty.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,1259 +0,0 @@
-/*
- * CTC / ESCON network driver, tty interface.
- *
- * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Fritz Elfert ([email protected], [email protected])
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_reg.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include <linux/devfs_fs_kernel.h>
-#include "ctctty.h"
-#include "ctcdbug.h"
-
-#define CTC_TTY_MAJOR 43
-#define CTC_TTY_MAX_DEVICES 64
-
-#define CTC_ASYNC_MAGIC 0x49344C01 /* for paranoia-checking */
-#define CTC_ASYNC_INITIALIZED 0x80000000 /* port was initialized */
-#define CTC_ASYNC_NORMAL_ACTIVE 0x20000000 /* Normal device active */
-#define CTC_ASYNC_CLOSING 0x08000000 /* Serial port is closing */
-#define CTC_ASYNC_CTS_FLOW 0x04000000 /* Do CTS flow control */
-#define CTC_ASYNC_CHECK_CD 0x02000000 /* i.e., CLOCAL */
-#define CTC_ASYNC_HUP_NOTIFY 0x0001 /* Notify tty on hangups/closes */
-#define CTC_ASYNC_NETDEV_OPEN 0x0002 /* Underlying netdev is open */
-#define CTC_ASYNC_TX_LINESTAT 0x0004 /* Must send line status */
-#define CTC_ASYNC_SPLIT_TERMIOS 0x0008 /* Sep. termios for dialin/out */
-#define CTC_TTY_XMIT_SIZE 1024 /* Default bufsize for write */
-#define CTC_SERIAL_XMIT_MAX 4000 /* Maximum bufsize for write */
-
-/* Private data (similar to async_struct in <linux/serial.h>) */
-typedef struct {
- int magic;
- int flags; /* defined in tty.h */
- int mcr; /* Modem control register */
- int msr; /* Modem status register */
- int lsr; /* Line status register */
- int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- struct net_device *netdev;
- struct sk_buff_head tx_queue; /* transmit queue */
- struct sk_buff_head rx_queue; /* receive queue */
- struct tty_struct *tty; /* Pointer to corresponding tty */
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- struct semaphore write_sem;
- struct tasklet_struct tasklet;
- struct timer_list stoptimer;
-} ctc_tty_info;
-
-/* Description of one CTC-tty */
-typedef struct {
- struct tty_driver *ctc_tty_device; /* tty-device */
- ctc_tty_info info[CTC_TTY_MAX_DEVICES]; /* Private data */
-} ctc_tty_driver;
-
-static ctc_tty_driver *driver;
-
-/* Leave this unchanged unless you know what you do! */
-#define MODEM_PARANOIA_CHECK
-#define MODEM_DO_RESTART
-
-#define CTC_TTY_NAME "ctctty"
-
-static __u32 ctc_tty_magic = CTC_ASYNC_MAGIC;
-static int ctc_tty_shuttingdown = 0;
-
-static spinlock_t ctc_tty_lock;
-
-/* ctc_tty_try_read() is called from within ctc_tty_rcv_skb()
- * to stuff incoming data directly into a tty's flip-buffer. If the
- * flip buffer is full, the packet gets queued up.
- *
- * Return:
- * 1 = Success
- * 0 = Failure, data has to be buffered and later processed by
- * ctc_tty_readmodem().
- */
-static int
-ctc_tty_try_read(ctc_tty_info * info, struct sk_buff *skb)
-{
- int len;
- struct tty_struct *tty;
-
- DBF_TEXT(trace, 5, __FUNCTION__);
- if ((tty = info->tty)) {
- if (info->mcr & UART_MCR_RTS) {
- len = skb->len;
- tty_insert_flip_string(tty, skb->data, len);
- tty_flip_buffer_push(tty);
- kfree_skb(skb);
- return 1;
- }
- }
- return 0;
-}
-
-/* ctc_tty_readmodem() is called periodically from within timer-interrupt.
- * It tries getting received data from the receive queue an stuff it into
- * the tty's flip-buffer.
- */
-static int
-ctc_tty_readmodem(ctc_tty_info *info)
-{
- int ret = 1;
- struct tty_struct *tty;
-
- DBF_TEXT(trace, 5, __FUNCTION__);
- if ((tty = info->tty)) {
- if (info->mcr & UART_MCR_RTS) {
- struct sk_buff *skb;
-
- if ((skb = skb_dequeue(&info->rx_queue))) {
- int len = skb->len;
- tty_insert_flip_string(tty, skb->data, len);
- skb_pull(skb, len);
- tty_flip_buffer_push(tty);
- if (skb->len > 0)
- skb_queue_head(&info->rx_queue, skb);
- else {
- kfree_skb(skb);
- ret = !skb_queue_empty(&info->rx_queue);
- }
- }
- }
- }
- return ret;
-}
-
-void
-ctc_tty_setcarrier(struct net_device *netdev, int on)
-{
- int i;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if ((!driver) || ctc_tty_shuttingdown)
- return;
- for (i = 0; i < CTC_TTY_MAX_DEVICES; i++)
- if (driver->info[i].netdev == netdev) {
- ctc_tty_info *info = &driver->info[i];
- if (on)
- info->msr |= UART_MSR_DCD;
- else
- info->msr &= ~UART_MSR_DCD;
- if ((info->flags & CTC_ASYNC_CHECK_CD) && (!on))
- tty_hangup(info->tty);
- }
-}
-
-void
-ctc_tty_netif_rx(struct sk_buff *skb)
-{
- int i;
- ctc_tty_info *info = NULL;
-
- DBF_TEXT(trace, 5, __FUNCTION__);
- if (!skb)
- return;
- if ((!skb->dev) || (!driver) || ctc_tty_shuttingdown) {
- dev_kfree_skb(skb);
- return;
- }
- for (i = 0; i < CTC_TTY_MAX_DEVICES; i++)
- if (driver->info[i].netdev == skb->dev) {
- info = &driver->info[i];
- break;
- }
- if (!info) {
- dev_kfree_skb(skb);
- return;
- }
- if (skb->len < 6) {
- dev_kfree_skb(skb);
- return;
- }
- if (memcmp(skb->data, &ctc_tty_magic, sizeof(__u32))) {
- dev_kfree_skb(skb);
- return;
- }
- skb_pull(skb, sizeof(__u32));
-
- i = *((int *)skb->data);
- skb_pull(skb, sizeof(info->mcr));
- if (i & UART_MCR_RTS) {
- info->msr |= UART_MSR_CTS;
- if (info->flags & CTC_ASYNC_CTS_FLOW)
- info->tty->hw_stopped = 0;
- } else {
- info->msr &= ~UART_MSR_CTS;
- if (info->flags & CTC_ASYNC_CTS_FLOW)
- info->tty->hw_stopped = 1;
- }
- if (i & UART_MCR_DTR)
- info->msr |= UART_MSR_DSR;
- else
- info->msr &= ~UART_MSR_DSR;
- if (skb->len <= 0) {
- kfree_skb(skb);
- return;
- }
- /* Try to deliver directly via tty-flip-buf if queue is empty */
- if (skb_queue_empty(&info->rx_queue))
- if (ctc_tty_try_read(info, skb))
- return;
- /* Direct deliver failed or queue wasn't empty.
- * Queue up for later dequeueing via timer-irq.
- */
- skb_queue_tail(&info->rx_queue, skb);
- /* Schedule dequeuing */
- tasklet_schedule(&info->tasklet);
-}
-
-static int
-ctc_tty_tint(ctc_tty_info * info)
-{
- struct sk_buff *skb = skb_dequeue(&info->tx_queue);
- int stopped = (info->tty->hw_stopped || info->tty->stopped);
- int wake = 1;
- int rc;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (!info->netdev) {
- if (skb)
- kfree_skb(skb);
- return 0;
- }
- if (info->flags & CTC_ASYNC_TX_LINESTAT) {
- int skb_res = info->netdev->hard_header_len +
- sizeof(info->mcr) + sizeof(__u32);
- /* If we must update line status,
- * create an empty dummy skb and insert it.
- */
- if (skb)
- skb_queue_head(&info->tx_queue, skb);
-
- skb = dev_alloc_skb(skb_res);
- if (!skb) {
- printk(KERN_WARNING
- "ctc_tty: Out of memory in %s%d tint\n",
- CTC_TTY_NAME, info->line);
- return 1;
- }
- skb_reserve(skb, skb_res);
- stopped = 0;
- wake = 0;
- }
- if (!skb)
- return 0;
- if (stopped) {
- skb_queue_head(&info->tx_queue, skb);
- return 1;
- }
-#if 0
- if (skb->len > 0)
- printk(KERN_DEBUG "tint: %d %02x\n", skb->len, *(skb->data));
- else
- printk(KERN_DEBUG "tint: %d STAT\n", skb->len);
-#endif
- memcpy(skb_push(skb, sizeof(info->mcr)), &info->mcr, sizeof(info->mcr));
- memcpy(skb_push(skb, sizeof(__u32)), &ctc_tty_magic, sizeof(__u32));
- rc = info->netdev->hard_start_xmit(skb, info->netdev);
- if (rc) {
- skb_pull(skb, sizeof(info->mcr) + sizeof(__u32));
- if (skb->len > 0)
- skb_queue_head(&info->tx_queue, skb);
- else
- kfree_skb(skb);
- } else {
- struct tty_struct *tty = info->tty;
-
- info->flags &= ~CTC_ASYNC_TX_LINESTAT;
- if (tty) {
- tty_wakeup(tty);
- }
- }
- return (skb_queue_empty(&info->tx_queue) ? 0 : 1);
-}
-
-/************************************************************
- *
- * Modem-functions
- *
- * mostly "stolen" from original Linux-serial.c and friends.
- *
- ************************************************************/
-
-static inline int
-ctc_tty_paranoia_check(ctc_tty_info * info, char *name, const char *routine)
-{
-#ifdef MODEM_PARANOIA_CHECK
- if (!info) {
- printk(KERN_WARNING "ctc_tty: null info_struct for %s in %s\n",
- name, routine);
- return 1;
- }
- if (info->magic != CTC_ASYNC_MAGIC) {
- printk(KERN_WARNING "ctc_tty: bad magic for info struct %s in %s\n",
- name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-static void
-ctc_tty_inject(ctc_tty_info *info, char c)
-{
- int skb_res;
- struct sk_buff *skb;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (ctc_tty_shuttingdown)
- return;
- skb_res = info->netdev->hard_header_len + sizeof(info->mcr) +
- sizeof(__u32) + 1;
- skb = dev_alloc_skb(skb_res);
- if (!skb) {
- printk(KERN_WARNING
- "ctc_tty: Out of memory in %s%d tx_inject\n",
- CTC_TTY_NAME, info->line);
- return;
- }
- skb_reserve(skb, skb_res);
- *(skb_put(skb, 1)) = c;
- skb_queue_head(&info->tx_queue, skb);
- tasklet_schedule(&info->tasklet);
-}
-
-static void
-ctc_tty_transmit_status(ctc_tty_info *info)
-{
- DBF_TEXT(trace, 5, __FUNCTION__);
- if (ctc_tty_shuttingdown)
- return;
- info->flags |= CTC_ASYNC_TX_LINESTAT;
- tasklet_schedule(&info->tasklet);
-}
-
-static void
-ctc_tty_change_speed(ctc_tty_info * info)
-{
- unsigned int cflag;
- unsigned int quot;
- int i;
-
- DBF_TEXT(trace, 3, __FUNCTION__);
- if (!info->tty || !info->tty->termios)
- return;
- cflag = info->tty->termios->c_cflag;
-
- quot = i = cflag & CBAUD;
- if (i & CBAUDEX) {
- i &= ~CBAUDEX;
- if (i < 1 || i > 2)
- info->tty->termios->c_cflag &= ~CBAUDEX;
- else
- i += 15;
- }
- if (quot) {
- info->mcr |= UART_MCR_DTR;
- info->mcr |= UART_MCR_RTS;
- ctc_tty_transmit_status(info);
- } else {
- info->mcr &= ~UART_MCR_DTR;
- info->mcr &= ~UART_MCR_RTS;
- ctc_tty_transmit_status(info);
- return;
- }
-
- /* CTS flow control flag and modem status interrupts */
- if (cflag & CRTSCTS) {
- info->flags |= CTC_ASYNC_CTS_FLOW;
- } else
- info->flags &= ~CTC_ASYNC_CTS_FLOW;
- if (cflag & CLOCAL)
- info->flags &= ~CTC_ASYNC_CHECK_CD;
- else {
- info->flags |= CTC_ASYNC_CHECK_CD;
- }
-}
-
-static int
-ctc_tty_startup(ctc_tty_info * info)
-{
- DBF_TEXT(trace, 3, __FUNCTION__);
- if (info->flags & CTC_ASYNC_INITIALIZED)
- return 0;
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "starting up %s%d ...\n", CTC_TTY_NAME, info->line);
-#endif
- /*
- * Now, initialize the UART
- */
- info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
- if (info->tty)
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- /*
- * and set the speed of the serial port
- */
- ctc_tty_change_speed(info);
-
- info->flags |= CTC_ASYNC_INITIALIZED;
- if (!(info->flags & CTC_ASYNC_NETDEV_OPEN))
- info->netdev->open(info->netdev);
- info->flags |= CTC_ASYNC_NETDEV_OPEN;
- return 0;
-}
-
-static void
-ctc_tty_stopdev(unsigned long data)
-{
- ctc_tty_info *info = (ctc_tty_info *)data;
-
- if ((!info) || (!info->netdev) ||
- (info->flags & CTC_ASYNC_INITIALIZED))
- return;
- info->netdev->stop(info->netdev);
- info->flags &= ~CTC_ASYNC_NETDEV_OPEN;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void
-ctc_tty_shutdown(ctc_tty_info * info)
-{
- DBF_TEXT(trace, 3, __FUNCTION__);
- if (!(info->flags & CTC_ASYNC_INITIALIZED))
- return;
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "Shutting down %s%d ....\n", CTC_TTY_NAME, info->line);
-#endif
- info->msr &= ~UART_MSR_RI;
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
- info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
- if (info->tty)
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- mod_timer(&info->stoptimer, jiffies + (10 * HZ));
- skb_queue_purge(&info->tx_queue);
- skb_queue_purge(&info->rx_queue);
- info->flags &= ~CTC_ASYNC_INITIALIZED;
-}
-
-/* ctc_tty_write() is the main send-routine. It is called from the upper
- * levels within the kernel to perform sending data. Depending on the
- * online-flag it either directs output to the at-command-interpreter or
- * to the lower level. Additional tasks done here:
- * - If online, check for escape-sequence (+++)
- * - If sending audio-data, call ctc_tty_DLEdown() to parse DLE-codes.
- * - If receiving audio-data, call ctc_tty_end_vrx() to abort if needed.
- * - If dialing, abort dial.
- */
-static int
-ctc_tty_write(struct tty_struct *tty, const u_char * buf, int count)
-{
- int c;
- int total = 0;
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
-
- DBF_TEXT(trace, 5, __FUNCTION__);
- if (ctc_tty_shuttingdown)
- goto ex;
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_write"))
- goto ex;
- if (!tty)
- goto ex;
- if (!info->netdev) {
- total = -ENODEV;
- goto ex;
- }
- while (1) {
- struct sk_buff *skb;
- int skb_res;
-
- c = (count < CTC_TTY_XMIT_SIZE) ? count : CTC_TTY_XMIT_SIZE;
- if (c <= 0)
- break;
-
- skb_res = info->netdev->hard_header_len + sizeof(info->mcr) +
- + sizeof(__u32);
- skb = dev_alloc_skb(skb_res + c);
- if (!skb) {
- printk(KERN_WARNING
- "ctc_tty: Out of memory in %s%d write\n",
- CTC_TTY_NAME, info->line);
- break;
- }
- skb_reserve(skb, skb_res);
- memcpy(skb_put(skb, c), buf, c);
- skb_queue_tail(&info->tx_queue, skb);
- buf += c;
- total += c;
- count -= c;
- }
- if (!skb_queue_empty(&info->tx_queue)) {
- info->lsr &= ~UART_LSR_TEMT;
- tasklet_schedule(&info->tasklet);
- }
-ex:
- DBF_TEXT(trace, 6, __FUNCTION__);
- return total;
-}
-
-static int
-ctc_tty_write_room(struct tty_struct *tty)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
-
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_write_room"))
- return 0;
- return CTC_TTY_XMIT_SIZE;
-}
-
-static int
-ctc_tty_chars_in_buffer(struct tty_struct *tty)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
-
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_chars_in_buffer"))
- return 0;
- return 0;
-}
-
-static void
-ctc_tty_flush_buffer(struct tty_struct *tty)
-{
- ctc_tty_info *info;
- unsigned long flags;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (!tty)
- goto ex;
- spin_lock_irqsave(&ctc_tty_lock, flags);
- info = (ctc_tty_info *) tty->driver_data;
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_flush_buffer")) {
- spin_unlock_irqrestore(&ctc_tty_lock, flags);
- goto ex;
- }
- skb_queue_purge(&info->tx_queue);
- info->lsr |= UART_LSR_TEMT;
- spin_unlock_irqrestore(&ctc_tty_lock, flags);
- wake_up_interruptible(&tty->write_wait);
- tty_wakeup(tty);
-ex:
- DBF_TEXT_(trace, 2, "ex: %s ", __FUNCTION__);
- return;
-}
-
-static void
-ctc_tty_flush_chars(struct tty_struct *tty)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (ctc_tty_shuttingdown)
- return;
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_flush_chars"))
- return;
- if (tty->stopped || tty->hw_stopped || skb_queue_empty(&info->tx_queue))
- return;
- tasklet_schedule(&info->tasklet);
-}
-
-/*
- * ------------------------------------------------------------
- * ctc_tty_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void
-ctc_tty_throttle(struct tty_struct *tty)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_throttle"))
- return;
- info->mcr &= ~UART_MCR_RTS;
- if (I_IXOFF(tty))
- ctc_tty_inject(info, STOP_CHAR(tty));
- ctc_tty_transmit_status(info);
-}
-
-static void
-ctc_tty_unthrottle(struct tty_struct *tty)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_unthrottle"))
- return;
- info->mcr |= UART_MCR_RTS;
- if (I_IXOFF(tty))
- ctc_tty_inject(info, START_CHAR(tty));
- ctc_tty_transmit_status(info);
-}
-
-/*
- * ------------------------------------------------------------
- * ctc_tty_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-/*
- * ctc_tty_get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows RS485 driver to be written in user space.
- */
-static int
-ctc_tty_get_lsr_info(ctc_tty_info * info, uint __user *value)
-{
- u_char status;
- uint result;
- ulong flags;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- spin_lock_irqsave(&ctc_tty_lock, flags);
- status = info->lsr;
- spin_unlock_irqrestore(&ctc_tty_lock, flags);
- result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
- put_user(result, value);
- return 0;
-}
-
-
-static int ctc_tty_tiocmget(struct tty_struct *tty, struct file *file)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
- u_char control,
- status;
- uint result;
- ulong flags;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- control = info->mcr;
- spin_lock_irqsave(&ctc_tty_lock, flags);
- status = info->msr;
- spin_unlock_irqrestore(&ctc_tty_lock, flags);
- result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
- | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
- | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
- | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
- | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
- | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
- return result;
-}
-
-static int
-ctc_tty_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- if (set & TIOCM_RTS)
- info->mcr |= UART_MCR_RTS;
- if (set & TIOCM_DTR)
- info->mcr |= UART_MCR_DTR;
-
- if (clear & TIOCM_RTS)
- info->mcr &= ~UART_MCR_RTS;
- if (clear & TIOCM_DTR)
- info->mcr &= ~UART_MCR_DTR;
-
- if ((set | clear) & (TIOCM_RTS|TIOCM_DTR))
- ctc_tty_transmit_status(info);
- return 0;
-}
-
-static int
-ctc_tty_ioctl(struct tty_struct *tty, struct file *file,
- uint cmd, ulong arg)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
- int error;
- int retval;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_ioctl"))
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
-#ifdef CTC_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "%s%d ioctl TCSBRK\n", CTC_TTY_NAME, info->line);
-#endif
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
-#ifdef CTC_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "%s%d ioctl TCSBRKP\n", CTC_TTY_NAME, info->line);
-#endif
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- return 0;
- case TIOCGSOFTCAR:
-#ifdef CTC_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "%s%d ioctl TIOCGSOFTCAR\n", CTC_TTY_NAME,
- info->line);
-#endif
- error = put_user(C_CLOCAL(tty) ? 1 : 0, (ulong __user *) arg);
- return error;
- case TIOCSSOFTCAR:
-#ifdef CTC_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "%s%d ioctl TIOCSSOFTCAR\n", CTC_TTY_NAME,
- info->line);
-#endif
- error = get_user(arg, (ulong __user *) arg);
- if (error)
- return error;
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- return 0;
- case TIOCSERGETLSR: /* Get line status register */
-#ifdef CTC_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "%s%d ioctl TIOCSERGETLSR\n", CTC_TTY_NAME,
- info->line);
-#endif
- if (access_ok(VERIFY_WRITE, (void __user *) arg, sizeof(uint)))
- return ctc_tty_get_lsr_info(info, (uint __user *) arg);
- else
- return -EFAULT;
- default:
-#ifdef CTC_DEBUG_MODEM_IOCTL
- printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on %s%d\n", cmd,
- CTC_TTY_NAME, info->line);
-#endif
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void
-ctc_tty_set_termios(struct tty_struct *tty, struct termios *old_termios)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
- unsigned int cflag = tty->termios->c_cflag;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- ctc_tty_change_speed(info);
-
- /* Handle transition to B0 */
- if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) {
- info->mcr &= ~(UART_MCR_DTR|UART_MCR_RTS);
- ctc_tty_transmit_status(info);
- }
-
- /* Handle transition from B0 to other */
- if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
- info->mcr |= UART_MCR_DTR;
- if (!(tty->termios->c_cflag & CRTSCTS) ||
- !test_bit(TTY_THROTTLED, &tty->flags)) {
- info->mcr |= UART_MCR_RTS;
- }
- ctc_tty_transmit_status(info);
- }
-
- /* Handle turning off CRTSCTS */
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS))
- tty->hw_stopped = 0;
-}
-
-/*
- * ------------------------------------------------------------
- * ctc_tty_open() and friends
- * ------------------------------------------------------------
- */
-static int
-ctc_tty_block_til_ready(struct tty_struct *tty, struct file *filp, ctc_tty_info *info)
-{
- DECLARE_WAITQUEUE(wait, NULL);
- int do_clocal = 0;
- unsigned long flags;
- int retval;
-
- DBF_TEXT(trace, 4, __FUNCTION__);
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) ||
- (info->flags & CTC_ASYNC_CLOSING)) {
- if (info->flags & CTC_ASYNC_CLOSING)
- wait_event(info->close_wait,
- !(info->flags & CTC_ASYNC_CLOSING));
-#ifdef MODEM_DO_RESTART
- if (info->flags & CTC_ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= CTC_ASYNC_NORMAL_ACTIVE;
- return 0;
- }
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * ctc_tty_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_block_til_ready before block: %s%d, count = %d\n",
- CTC_TTY_NAME, info->line, info->count);
-#endif
- spin_lock_irqsave(&ctc_tty_lock, flags);
- if (!(tty_hung_up_p(filp)))
- info->count--;
- spin_unlock_irqrestore(&ctc_tty_lock, flags);
- info->blocked_open++;
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(info->flags & CTC_ASYNC_INITIALIZED)) {
-#ifdef MODEM_DO_RESTART
- if (info->flags & CTC_ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- if (!(info->flags & CTC_ASYNC_CLOSING) &&
- (do_clocal || (info->msr & UART_MSR_DCD))) {
- break;
- }
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_block_til_ready blocking: %s%d, count = %d\n",
- CTC_TTY_NAME, info->line, info->count);
-#endif
- schedule();
- }
- current->state = TASK_RUNNING;
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- info->count++;
- info->blocked_open--;
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_block_til_ready after blocking: %s%d, count = %d\n",
- CTC_TTY_NAME, info->line, info->count);
-#endif
- if (retval)
- return retval;
- info->flags |= CTC_ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain. It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int
-ctc_tty_open(struct tty_struct *tty, struct file *filp)
-{
- ctc_tty_info *info;
- unsigned long saveflags;
- int retval,
- line;
-
- DBF_TEXT(trace, 3, __FUNCTION__);
- line = tty->index;
- if (line < 0 || line > CTC_TTY_MAX_DEVICES)
- return -ENODEV;
- info = &driver->info[line];
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_open"))
- return -ENODEV;
- if (!info->netdev)
- return -ENODEV;
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_open %s, count = %d\n", tty->name,
- info->count);
-#endif
- spin_lock_irqsave(&ctc_tty_lock, saveflags);
- info->count++;
- tty->driver_data = info;
- info->tty = tty;
- spin_unlock_irqrestore(&ctc_tty_lock, saveflags);
- /*
- * Start up serial port
- */
- retval = ctc_tty_startup(info);
- if (retval) {
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_open return after startup\n");
-#endif
- return retval;
- }
- retval = ctc_tty_block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_open return after ctc_tty_block_til_ready \n");
-#endif
- return retval;
- }
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_open %s successful...\n", tty->name);
-#endif
- return 0;
-}
-
-static void
-ctc_tty_close(struct tty_struct *tty, struct file *filp)
-{
- ctc_tty_info *info = (ctc_tty_info *) tty->driver_data;
- ulong flags;
- ulong timeout;
- DBF_TEXT(trace, 3, __FUNCTION__);
- if (!info || ctc_tty_paranoia_check(info, tty->name, "ctc_tty_close"))
- return;
- spin_lock_irqsave(&ctc_tty_lock, flags);
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&ctc_tty_lock, flags);
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_close return after tty_hung_up_p\n");
-#endif
- return;
- }
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk(KERN_ERR "ctc_tty_close: bad port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
- }
- if (--info->count < 0) {
- printk(KERN_ERR "ctc_tty_close: bad port count for %s%d: %d\n",
- CTC_TTY_NAME, info->line, info->count);
- info->count = 0;
- }
- if (info->count) {
- local_irq_restore(flags);
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_close after info->count != 0\n");
-#endif
- return;
- }
- info->flags |= CTC_ASYNC_CLOSING;
- tty->closing = 1;
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
- if (info->flags & CTC_ASYNC_INITIALIZED) {
- tty_wait_until_sent(tty, 30*HZ); /* 30 seconds timeout */
- /*
- * Before we drop DTR, make sure the UART transmitter
- * has completely drained; this is especially
- * important if there is a transmit FIFO!
- */
- timeout = jiffies + HZ;
- while (!(info->lsr & UART_LSR_TEMT)) {
- spin_unlock_irqrestore(&ctc_tty_lock, flags);
- msleep(500);
- spin_lock_irqsave(&ctc_tty_lock, flags);
- if (time_after(jiffies,timeout))
- break;
- }
- }
- ctc_tty_shutdown(info);
- if (tty->driver->flush_buffer) {
- skb_queue_purge(&info->tx_queue);
- info->lsr |= UART_LSR_TEMT;
- }
- tty_ldisc_flush(tty);
- info->tty = 0;
- tty->closing = 0;
- if (info->blocked_open) {
- msleep_interruptible(500);
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(CTC_ASYNC_NORMAL_ACTIVE | CTC_ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
- spin_unlock_irqrestore(&ctc_tty_lock, flags);
-#ifdef CTC_DEBUG_MODEM_OPEN
- printk(KERN_DEBUG "ctc_tty_close normal exit\n");
-#endif
-}
-
-/*
- * ctc_tty_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-static void
-ctc_tty_hangup(struct tty_struct *tty)
-{
- ctc_tty_info *info = (ctc_tty_info *)tty->driver_data;
- unsigned long saveflags;
- DBF_TEXT(trace, 3, __FUNCTION__);
- if (ctc_tty_paranoia_check(info, tty->name, "ctc_tty_hangup"))
- return;
- ctc_tty_shutdown(info);
- info->count = 0;
- info->flags &= ~CTC_ASYNC_NORMAL_ACTIVE;
- spin_lock_irqsave(&ctc_tty_lock, saveflags);
- info->tty = 0;
- spin_unlock_irqrestore(&ctc_tty_lock, saveflags);
- wake_up_interruptible(&info->open_wait);
-}
-
-
-/*
- * For all online tty's, try sending data to
- * the lower levels.
- */
-static void
-ctc_tty_task(unsigned long arg)
-{
- ctc_tty_info *info = (void *)arg;
- unsigned long saveflags;
- int again;
-
- DBF_TEXT(trace, 3, __FUNCTION__);
- spin_lock_irqsave(&ctc_tty_lock, saveflags);
- if ((!ctc_tty_shuttingdown) && info) {
- again = ctc_tty_tint(info);
- if (!again)
- info->lsr |= UART_LSR_TEMT;
- again |= ctc_tty_readmodem(info);
- if (again) {
- tasklet_schedule(&info->tasklet);
- }
- }
- spin_unlock_irqrestore(&ctc_tty_lock, saveflags);
-}
-
-static struct tty_operations ctc_ops = {
- .open = ctc_tty_open,
- .close = ctc_tty_close,
- .write = ctc_tty_write,
- .flush_chars = ctc_tty_flush_chars,
- .write_room = ctc_tty_write_room,
- .chars_in_buffer = ctc_tty_chars_in_buffer,
- .flush_buffer = ctc_tty_flush_buffer,
- .ioctl = ctc_tty_ioctl,
- .throttle = ctc_tty_throttle,
- .unthrottle = ctc_tty_unthrottle,
- .set_termios = ctc_tty_set_termios,
- .hangup = ctc_tty_hangup,
- .tiocmget = ctc_tty_tiocmget,
- .tiocmset = ctc_tty_tiocmset,
-};
-
-int
-ctc_tty_init(void)
-{
- int i;
- ctc_tty_info *info;
- struct tty_driver *device;
-
- DBF_TEXT(trace, 2, __FUNCTION__);
- driver = kmalloc(sizeof(ctc_tty_driver), GFP_KERNEL);
- if (driver == NULL) {
- printk(KERN_WARNING "Out of memory in ctc_tty_modem_init\n");
- return -ENOMEM;
- }
- memset(driver, 0, sizeof(ctc_tty_driver));
- device = alloc_tty_driver(CTC_TTY_MAX_DEVICES);
- if (!device) {
- kfree(driver);
- printk(KERN_WARNING "Out of memory in ctc_tty_modem_init\n");
- return -ENOMEM;
- }
-
- device->devfs_name = "ctc/" CTC_TTY_NAME;
- device->name = CTC_TTY_NAME;
- device->major = CTC_TTY_MAJOR;
- device->minor_start = 0;
- device->type = TTY_DRIVER_TYPE_SERIAL;
- device->subtype = SERIAL_TYPE_NORMAL;
- device->init_termios = tty_std_termios;
- device->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- device->flags = TTY_DRIVER_REAL_RAW;
- device->driver_name = "ctc_tty",
- tty_set_operations(device, &ctc_ops);
- if (tty_register_driver(device)) {
- printk(KERN_WARNING "ctc_tty: Couldn't register serial-device\n");
- put_tty_driver(device);
- kfree(driver);
- return -1;
- }
- driver->ctc_tty_device = device;
- for (i = 0; i < CTC_TTY_MAX_DEVICES; i++) {
- info = &driver->info[i];
- init_MUTEX(&info->write_sem);
- tasklet_init(&info->tasklet, ctc_tty_task,
- (unsigned long) info);
- info->magic = CTC_ASYNC_MAGIC;
- info->line = i;
- info->tty = 0;
- info->count = 0;
- info->blocked_open = 0;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
- skb_queue_head_init(&info->tx_queue);
- skb_queue_head_init(&info->rx_queue);
- init_timer(&info->stoptimer);
- info->stoptimer.function = ctc_tty_stopdev;
- info->stoptimer.data = (unsigned long)info;
- info->mcr = UART_MCR_RTS;
- }
- return 0;
-}
-
-int
-ctc_tty_register_netdev(struct net_device *dev) {
- int ttynum;
- char *err;
- char *p;
-
- DBF_TEXT(trace, 2, __FUNCTION__);
- if ((!dev) || (!dev->name)) {
- printk(KERN_WARNING
- "ctc_tty_register_netdev called "
- "with NULL dev or NULL dev-name\n");
- return -1;
- }
-
- /*
- * If the name is a format string the caller wants us to
- * do a name allocation : format string must end with %d
- */
- if (strchr(dev->name, '%'))
- {
- int err = dev_alloc_name(dev, dev->name); // dev->name is changed by this
- if (err < 0) {
- printk(KERN_DEBUG "dev_alloc returned error %d\n", err);
- return err;
- }
-
- }
-
- for (p = dev->name; p && ((*p < '0') || (*p > '9')); p++);
- ttynum = simple_strtoul(p, &err, 0);
- if ((ttynum < 0) || (ttynum >= CTC_TTY_MAX_DEVICES) ||
- (err && *err)) {
- printk(KERN_WARNING
- "ctc_tty_register_netdev called "
- "with number in name '%s'\n", dev->name);
- return -1;
- }
- if (driver->info[ttynum].netdev) {
- printk(KERN_WARNING
- "ctc_tty_register_netdev called "
- "for already registered device '%s'\n",
- dev->name);
- return -1;
- }
- driver->info[ttynum].netdev = dev;
- return 0;
-}
-
-void
-ctc_tty_unregister_netdev(struct net_device *dev) {
- int i;
- unsigned long saveflags;
- ctc_tty_info *info = NULL;
-
- DBF_TEXT(trace, 2, __FUNCTION__);
- spin_lock_irqsave(&ctc_tty_lock, saveflags);
- for (i = 0; i < CTC_TTY_MAX_DEVICES; i++)
- if (driver->info[i].netdev == dev) {
- info = &driver->info[i];
- break;
- }
- if (info) {
- info->netdev = NULL;
- skb_queue_purge(&info->tx_queue);
- skb_queue_purge(&info->rx_queue);
- }
- spin_unlock_irqrestore(&ctc_tty_lock, saveflags);
-}
-
-void
-ctc_tty_cleanup(void) {
- unsigned long saveflags;
-
- DBF_TEXT(trace, 2, __FUNCTION__);
- spin_lock_irqsave(&ctc_tty_lock, saveflags);
- ctc_tty_shuttingdown = 1;
- spin_unlock_irqrestore(&ctc_tty_lock, saveflags);
- tty_unregister_driver(driver->ctc_tty_device);
- put_tty_driver(driver->ctc_tty_device);
- kfree(driver);
- driver = NULL;
-}
diff -urpN linux-2.6/drivers/s390/net/ctctty.h linux-2.6-patched/drivers/s390/net/ctctty.h
--- linux-2.6/drivers/s390/net/ctctty.h 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6-patched/drivers/s390/net/ctctty.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,35 +0,0 @@
-/*
- * CTC / ESCON network driver, tty interface.
- *
- * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Fritz Elfert ([email protected], [email protected])
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _CTCTTY_H_
-#define _CTCTTY_H_
-
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-
-extern int ctc_tty_register_netdev(struct net_device *);
-extern void ctc_tty_unregister_netdev(struct net_device *);
-extern void ctc_tty_netif_rx(struct sk_buff *);
-extern int ctc_tty_init(void);
-extern void ctc_tty_cleanup(void);
-extern void ctc_tty_setcarrier(struct net_device *, int);
-
-#endif
diff -urpN linux-2.6/drivers/s390/net/Makefile linux-2.6-patched/drivers/s390/net/Makefile
--- linux-2.6/drivers/s390/net/Makefile 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6-patched/drivers/s390/net/Makefile 2006-03-22 14:36:37.000000000 +0100
@@ -2,7 +2,7 @@
# S/390 network devices
#
-ctc-objs := ctcmain.o ctctty.o ctcdbug.o
+ctc-objs := ctcmain.o ctcdbug.o
obj-$(CONFIG_IUCV) += iucv.o
obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o