Ok, I've let the release time between -rc's slide a bit too much again,
but -rc4 is out there, and this is the time to hunker down for 2.6.17.
If you know of any regressions, please holler now, so that we don't miss
them.
-rc4 itself is mainly random driver fixes (sound, infiniband, scsi,
network drivers), but some splice fixes too and some arch (arm, powerpc,
mips) updates. Shortlog follows,
Linus
---
Adrian Bunk:
[SCSI] megaraid/megaraid_mm.c: fix a NULL pointer dereference
[ALSA] sound/pci/: remove duplicate #include's
Kobject: possible cleanups
re-add the OSS SOUND_CS4232 option
[IRDA]: Removing unused EXPORT_SYMBOLs
Akinobu Mita:
[NET]: use hlist_unhashed()
Al Viro:
deal with deadlocks in audit_free()
move call of audit_free() into do_exit()
drop gfp_mask in audit_log_exit()
drop task argument of audit_syscall_{entry,exit}
no need to wank with task_lock() and pinning task down in audit_syscall_exit()
Alan Modra:
powerpc64: Fix loading of modules without a .toc section
Alan Stern:
USB: net2280: Handle STALLs for 0-length control-IN requests
USB: net2280: send 0-length packets for ep0
USB: net2280: check for shared IRQs
USB: net2280: set driver data before it is used
[NET]: Make netdev_chain a raw notifier.
Alexey Kuznetsov:
[IPV6]: skb leakage in inet6_csk_xmit
Ananth N Mavinakayanahalli:
powerpc/kprobes: fix singlestep out-of-line
Andi Kleen:
Mark VMSPLIT EMBEDDED
x86_64: Add compat_sys_vmsplice and use it in x86-64
i386/x86-64: Fix ACPI disabled LAPIC handling mismerge
i386: Fix overflow in e820_all_mapped
i386: Remove apic= warning
Remove wrong cpu_has_apic checks that came from mismerging
x86_64: Check for too many northbridges in IOMMU code
x86_64: Avoid EBDA area in early boot allocator
x86_64: Move ondemand timer into own work queue
Andreas Herrmann:
s390: qdio memory allocations
Andreas Schwab:
sound/ppc: snd_pmac_toonie_init should be __init
powerpc: Wire up *at syscalls
Andrew Morton:
[SCSI] megaraid: unused variable
request_irq(): remove warnings from irq probing
silence initcall warnings
Anton Blanchard:
powerpc: Add cputable entry for POWER6
Antonino A. Daplas:
suspend: Documentation update for IBM Thinkpad X30
asiliantfb: Add help text in Kconfig
Arnd Bergmann:
spufs: Disable local interrupts for SPE hash_page calls.
powerpc: update cell_defconfig
Ashok Raj:
enable X86_PC for HOTPLUG_CPU
Atsushi Nemoto:
[MIPS] Fix ip27 build.
[MIPS] Fix bitops for MIPS32/MIPS64 CPUs.
[MIPS] Use __ffs() instead of ffs() in ip32_irq0().
[MIPS] Sparse: fix sparse for 64-bit kernels.
kbuild: fix modpost segfault for 64bit mipsel kernel
RTC: rtc-dev tweak for 64-bit kernel
genrtc: fix read on 64-bit platforms
Ayaz Abdulla:
forcedeth: fix multi irq issues
Bastiaan Jacques:
[ALSA] via82xx: add support for VIA VT8251 (AC'97)
[ALSA] via82xx: tweak VT8251 workaround
Bastian Blank:
s390: make qeth buildable
Bellido Nicolas:
[ARM] 3503/1: Fix map_desc structure for aaec2000
[ARM] 3504/1: Fix clcd includes for aaec2000
[ARM] 3505/1: aaec2000: entry-macro.S needs asm/arch/irqs.h
[ARM] 3506/1: aaec2000: debug-macro.S needs hardware.h
[ARM] 3507/1: Replace map_desc.physical with map_desc.pfn: aaed2000
Brent Casavant:
[IA64] IOC4 config option ordering
Altix: correct ioc4 port order
Brian King:
[SCSI] scsi: Add IBM 2104-DU3 to blist
Bryan O'Sullivan:
IB/ipath: fix race with exposing reset file
IB/ipath: set up 32-bit DMA mask if 64-bit setup fails
IB/ipath: iterate over correct number of ports during reset
IB/ipath: change handling of PIO buffers
IB/ipath: fix verbs registration
IB/ipath: prevent hardware from being accessed during reset
IB/ipath: simplify RC send posting
IB/ipath: simplify IB timer usage
IB/ipath: improve sparse annotation
IB/ipath: fix label name in interrupt handler
IB/ipath: tidy up white space in a few files
Charis Kouzinopoulos:
[ALSA] Fix typos and add information about Jack support to Audiophile-Usb.txt
Chen, Kenneth W:
[IA64] strcpy returns NULL pointer and not destination pointer
Chris Dearman:
[MIPS] 24K LV: Add core card id.
Chris Wedgwood:
PCI quirk: VIA IRQ fixup should only run for VIA southbridges
Christian Borntraeger:
s390: fix slab debugging
s390: add read_mostly optimization
Christoph Hellwig:
[IRDA]: Switching to a workqueue for the SIR work
Christoph Lameter:
[IA64] Setup an IA64 specific reclaim distance
page migration: Fix fallback behavior for dirty pages
Chuck Ebbert:
i386: fix broken FP exception handling
Clemens Ladisch:
[ALSA] add another Phase 26 quirk
Cliff Wickman:
[IA64] enable dumps to capture second page of kernel stack
Corey Minyard:
x86_64: fix die_lock nesting
x86_64: add nmi_exit to die_nmi
Craig Brind:
via-rhine: zero pad short packets on Rhine I ethernet cards
Daniel Drake:
tipar oops fix
softmac: don't reassociate if user asked for deauthentication
softmac: make non-operational after being stopped
Darrel Goeddel:
support for context based audit filtering
support for context based audit filtering, part 2
Dave Jones:
Avoid printing pointless tsc skew msgs
David Brownell:
[IRDA]: smsc-ircc: Minimal hotplug support.
David Gibson:
powerpc: Fix pagetable bloat for hugepages
David S. Miller:
[SPARC64]: Kill __flush_tlb_page() prototype.
[SPARC64]: Disable preemption during flush_tlb_pending().
[SPARC]: Hook up vmsplice into syscall tables.
David Woodhouse:
powerpc: Use check_legacy_ioport() on ppc32 too.
bcm43xx: Fix access to non-existent PHY registers
dean gaudet:
off-by-1 in kernel/power/main.c
Deepak Saxena:
[ARM] 3487/1: IXP4xx: Support non-PCI systems
Denis Vlasenko:
[SCSI] aic7xxx: ahc_pci_write_config() fix
Dmitry Torokhov:
Input: allow passing NULL to input_free_device()
Input: move input_device_id to mod_devicetable.h
Input: psmouse - fix new device detection logic
Input: ressurect EVIOCGREP and EVIOCSREP
Input: make EVIOCGSND return meaningful data
Eric Moore:
[SCSI] fusion - bug fix stack overflow in mptbase
[SCSI] mptspi: revalidate negotiation parameters after host reset and resume
Eric Sesterhenn:
[SCSI] Overrun in drivers/scsi/sim710.c
fix array overrun in drivers/char/mwave/mwavedd.c
Erik Mouw:
[ALSA] PCMCIA sound devices shouldn't depend on ISA
Eugene Surovegin:
ppc32: add 440GX erratum 440_43 workaround
Francois Romieu:
dl2k: use DMA_48BIT_MASK constant
FUJITA Tomonori:
[SCSI] ibmvscsi: fix leak when failing to send srp event
Gary Zambrano:
[TG3]: Add reset_phy parameter to chip reset functions
George G. Davis:
[ARM] 3499/1: Fix VFP FPSCR corruption for double exception case
Gerald Schaefer:
s390: segment operation error codes
Greg Kroah-Hartman:
PCI: fix via irq SATA patch
Harald Welte:
[Cardman 40x0] Fix udev device creation
Heiko Carstens:
s390: instruction processing damage handling
[IPV4]: inet_init() -> fs_initcall
s390: fix ipd handling
s390: bug in setup_rt_frame
Henrik Kretzschmar:
[ALSA] pcxhr - Fix a compiler warning on 64bit architectures
[ALSA] add __devinitdata to all pci_device_id
Herbert Valerio Riedel:
au1000_eth.c: use ether_crc() from <linux/crc32.h>
phy: mdiobus_register(): initialize all phy_map entries
Herbert Xu:
[IPSEC]: Fix IP ID selection
[TCP]: Fix sock_orphan dead lock
[DCCP]: Fix sock_orphan dead lock
[NET] linkwatch: Handle jiffies wrap-around
Horst Hummel:
s390: dasd ioctl never returns
s390: dasd device identifiers
Hua Zhong:
[TCP]: Fix unlikely usage in tcp_transmit_skb()
[IPV4]: Remove likely in ip_rcv_finish()
Ian Abbott:
USB: ftdi_sio: add support for ASK RDR 400 series card reader
Imre Deak:
Input: ads7846 - add pen_down sysfs attribute
Input: ads7846 - power down ADC a bit later
Input: ads7846 - debouncing and rudimentary sample filtering
Input: ads7846 - miscellaneous fixes
Input: ads7846 - handle IRQs that were latched during disabled IRQs
Input: ads7846 - report 0 pressure value along with pen up event
Input: ads7846 - improve filtering for thumb press accuracy
Ingo Molnar:
[XFRM]: fix softirq-unsafe xfrm typemap->lock use
[XFRM]: fix incorrect xfrm_state_afinfo_lock use
[XFRM]: fix incorrect xfrm_policy_afinfo_lock use
Ingo Oeser:
PCI: Documentation: no more device ids
Jack Steiner:
[IA64] - Fix MAX_PXM_DOMAINS for systems with > 256 nodes
[IA64-SGI] - Fix discover of nearest cpu node to IO node
[IA64-SGI] - Reduce overhead of reading sn_topology
James Bottomley:
[SCSI] Fix DVD burning issues.
James Cameron:
sis900: phy for FoxCon motherboard
James Smart:
[SCSI] lpfc 8.1.5 : Fix Discovery processing for NPorts that hit nodev_tmo during discovery
[SCSI] lpfc 8.1.5 : Use asynchronous ABTS completion to speed up abort completions
[SCSI] lpfc 8.1.5 : Fixed FC protocol violation in handling of PRLO.
[SCSI] lpfc 8.1.5 : Fix cleanup code in the lpfc_pci_probe_one() error code path
[SCSI] lpfc 8.1.5 : Additional fixes to LOGO, PLOGI, and RSCN processing
[SCSI] lpfc 8.1.5 : Misc small fixes
[SCSI] lpfc 8.1.5 : Change version number to 8.1.5
[SCSI] lpfc 8.1.6 : Fix Data Corruption in Bus Reset Path
Jan Beulich:
kbuild: Do not overwrite makefile as anohter user
Jaroslav Kysela:
[ALSA] PCM core - introduce CONFIG_SND_PCM_XRUN_DEBUG
Jean Delvare:
USB: Use new PCI_CLASS_SERIAL_USB_* defines
Fix OCFS2 warning when DEBUG_FS is not enabled
ieee80211: Fix A band channel count (resent)
Jeff Dike:
uml: clean up after MADVISE_REMOVE
uml: update defconfig
uml: error handling fixes
uml: uml-makefile-nicer uses SYMLINK incorrectly
uml: change timer initialization
Jens Axboe:
splice: switch to using page_cache_readahead()
Add find_get_pages_contig(): contiguous variant of find_get_pages()
splice: make the read-side do batched page lookups
splice: fix bugs with stealing regular pipe pages
splice: fix bugs in pipe_to_file()
pipe: introduce ->pin() buffer operation
Add ->splice_read/splice_write to def_blk_fops
splice: call handle_ra_miss() on failure to lookup page
pipe: enable atomic copying of pipe data to/from user space
vmsplice: allow user to pass in gift pages
vmsplice: fix badly placed end paranthesis
splice: fix page LRU accounting
vmsplice: restrict stealing a little more
splice: fix unlocking of page on error ->prepare_write()
splice: LRU fixups
splice: rename remaining info variables to pipe
splice: redo page lookup if add_to_page_cache() returns -EEXIST
compat_sys_vmsplice: one-off in UIO_MAXIOV check
[BLOCK] limit request_fn recursion
Jens Osterkamp:
spidernet: introduce new setting
spidernet: enable support for bcm5461 ethernet phy
Jeremy Kerr:
powerpc: Allow devices to register with numa topology
powerpc: cell: Add numa id to struct spu
Jes Sorensen:
[IA64] update sn2 defconfig
Jesper Juhl:
[IA64] Remove redundant NULL checks before kfree
[SCSI] SCSI: aic7xxx_osm_pci resource leak fix.
USB: Resource leak fix for whiteheat driver
PCI: fix potential resource leak in drivers/pci/msi.c
uml: remove NULL checks and add some CodingStyle
[TG3]: Fix possible NULL deref in tg3_run_loopback().
Jing Min Zhao:
[NETFILTER]: H.323 helper: Change author's email address
Joel H Schopp:
spufs: fix for CONFIG_NUMA
John Heffner:
[TCP]: Fix snd_cwnd adjustments in tcp_highspeed.c
John Reed Riley:
Input: wistron - add support for Fujitsu N3510
Jon Anders Haugum:
[SERIAL] 8250: set divisor register correctly for AMD Alchemy SoC uart
Jon Mason:
[IA64] remove asm-ia64/bitops.h self-inclusion
Jon Smirl:
Frame buffer: remove cmap sysfs interface
Joris van Rantwijk:
uml: skas0 support for 2G/2G hosts
Ju, Seokmann:
[SCSI] megaraid_{mm,mbox}: fix a bug in reset handler
Juha Yrjola:
Input: ads7846 - use msleep() instead of udelay() in suspend
Kay Sievers:
Kobject: fix build error
Kenrik Kretzschmar:
[ALSA] adding __devinitdata to pci_device_id
Kimball Murray:
x86_64: avoid IRQ0 ioapic pin collision
Laurent Meyer:
s390: alternate signal stack handling bug
Linas Vepstas:
powerpc/pseries: avoid crash in PCI code if mem system not up
Linus Torvalds:
[SCSI] advansys driver: limp along on x86
CREDITS file update (Tristan Greaves)
Fix ptrace_attach()/ptrace_traceme()/de_thread() race
Revert "kbuild: fix modpost segfault for 64bit mipsel kernel"
ptrace_attach: fix possible deadlock schenario with irqs
Linux v2.6.17-rc4
Luiz Fernando N. Capitulino:
USB: ftdi_sio: Adds support for iPlus device.
mao, bibo:
kprobe cleanup for VM_MASK judgement
Marcelo Tosatti:
ppc32/8xx: Fix r3 trashing due to 8MB TLB page instantiation
mark gross:
EDAC Coexistence with BIOS
Markus Gutschke:
[ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macros
Martin Schwidefsky:
s390: futex atomic operations
s390: new system calls
Masami Hiramatsu:
kprobe: fix resume execution on i386
Mattia Dongili:
uml: search from uml_net in a more reasonable PATH
[email protected]:
[SCSI] mptfc: race between mptfc_register_dev and mptfc_target_alloc
Michael Buesch:
bcm43xx: fix iwmode crash when down
bcm43xx: Fix array overrun in bcm43xx_geo_init
Michael Chan:
[TG3]: Call netif_carrier_off() during phy reset
[TG3]: Add phy workaround
[TG3]: Reset chip when changing MAC address
[TG3]: Fix bug in nvram write
[TG3]: Update version and reldate
Michael Reed:
[SCSI] qla2xxx: Correct eh_abort recovery logic.
Michael S. Tsirkin:
IB/mthca: FMR ioremap fix
Mikael Pettersson:
x86_64: make PC Speaker driver work
Mike Habeck:
[IA64-SGI] fix SGI Altix tioce_reserve_m32() bug
Mike Kravetz:
sparsemem interaction with memory add bug fixes
Mingming Cao:
ext3: multile block allocate little endian fixes
Moore, Eric:
[SCSI] mptfusion: bug fix's for raid components adding/deleting
[SCSI] - fusion - mptfc bug fix's to prevent deadlock situations
Nathan Bronson:
USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USB
Nathan Scott:
[XFS] Fix a possible forced shutdown due to mishandling write barriers
[XFS] Fix a project quota space accounting leak on rename.
[XFS] Fix a possible metadata buffer (AGFL) refcount leak when fixing an
Neil Horman:
[SCTP]: Allow spillover of receive buffer to avoid deadlock.
NeilBrown:
md: Avoid oops when attempting to fix read errors on raid10
md: Fixed refcounting/locking when attempting read error correction in raid10
md: Change ENOTSUPP to EOPNOTSUPP
md: Improve detection of lack of barrier support in raid1
md: Fix 'rdev->nr_pending' count when retrying barrier requests
Nicolas Pitre:
[ARM] 3494/1: asm-arm/bug.h needs linux/stddef.h
[ARM] 3500/1: fix PXA27x DMA allocation priority
[ARM] 3495/1: EABI: undefine removed syscalls, but...
Olaf Hering:
mv643xx_eth: provide sysfs class device symlink
Olivier Blondeau:
USB: storage: atmel unusual dev update
Paolo 'Blaisorblade' Giarrusso:
uml: fix patch mismerge
uml: use Kbuild tracking for all files and fix compilation output
uml: fix compilation and execution with hardened GCC
uml: cleanup unprofile expression and build infrastructure
uml: export symbols added by GCC hardened
Paolo Ciarrocchi:
Added URI of "linux kernel development process"
Pat Gefre:
Altix: correct ioc3 port order
Patrick Caulfield:
[DECNET]: Fix level1 router hello
Patrick McHardy:
[NETFILTER] x_tables: fix compat related crash on non-x86
[NETFILTER] SCTP conntrack: fix infinite loop
[NETFILTER]: H.323 helper: fix endless loop caused by invalid TPKT len
[NETFILTER]: H.323 helper: fix use of uninitialized data
[NETFILTER]: NAT: silence unused variable warnings with CONFIG_XFRM=n
[NETFILTER]: x_tables: don't use __copy_{from,to}_user on unchecked memory in compat layer
[NET_SCHED]: HFSC: fix thinko in hfsc_adjust_levels()
Paul Mackerras:
powerpc/pseries: Tell firmware our capabilities on new machines
powerpc: Fix incorrect might_sleep in __get_user/__put_user on kernel addresses
powerpc: Use the ibm,pa-features property if available
powerpc/32: Define an is_kernel_addr() to fix ARCH=ppc compilation
Pavel Machek:
[ARM] 3508/1: Update collie defconfig
Pavel Pisa:
[ARM] 3485/1: i.MX: MX1 SD/MMC fix of unintentional double start possibility
Pavel Roskin:
kbuild: removing .tmp_versions considered harmful
Peter Oberparleiter:
s390: fix I/O termination race in cio
Phil Dibowitz:
USB: Storage: unusual devs update
Ralf Baechle:
[MIPS] Fix oprofile module unloading
[MIPS] Oprofile: fix sparse warning.
[MIPS] Kconfig: Clarify description of CROSSCOMPILE.
[MIPS] Get rid of CONFIG_ADVANCED.
[MIPS] Update MIPS defconfigs.
[MIPS] Cleanup inode->r_dev usage.
[MIPS] Fix branch emulation for floating-point exceptions.
au1200fb: Remove accidentally duplicated content of au1200fb.c
[ROSE]: Remove useless prototype for rose_remove_neigh().
[AX.25]: Spelling fix
[AX25, ROSE]: Remove useless SET_MODULE_OWNER calls.
[AX.25]: Move AX.25 symbol exports
[ROSE]: Fix routing table locking in rose_remove_neigh.
[AX.25]: Eleminate HZ from AX.25 kernel interfaces
[NETROM]: Eleminate HZ from NET/ROM kernel interfaces
[ROSE]: Eleminate HZ from ROSE kernel interfaces
[NETROM/ROSE]: Kill module init version kernel log messages.
Ralf Baechle DL5RB:
[HAMRADIO]: Remove remaining SET_MODULE_OWNER calls from hamradio drivers.
Ralph Campbell:
IB: Fix display of 4-bit port counters in sysfs
Randy Dunlap:
kbuild modpost - relax driver data name
[IRDA] irda-usb: use NULL instead of 0
Rene Herman:
[ALSA] continue on IS_ERR from platform device registration
Richard Purdie:
Input: spitzkbd - fix the reversed Address and Calender keys
Roland Dreier:
[SCSI] srp.h: avoid padding of structs
IB/mthca: Fix offset in query_gid method
IB/srp: Fix tracking of pending requests during error handling
IB/mthca: Fix race in reference counting
IPoIB: Free child interfaces properly
Russ Anderson:
[IA64] Remove unused variable in sn_sal.h
[IA64-SGI] SN SAL call to inject memory errors
[IA64] Add mca recovery failure messages
Russell King:
[SERIAL] Clean up serial locking when obtaining a reference to a port
[SERIAL] Remove unconditional enable of TX irq for console
[SERIAL] 8250: add locking to console write function
[MMC] extend data timeout for writes
[MMC] PXA and i.MX: don't avoid sending stop command on error
[MMC] PXA: reduce the number of lines PXAMCI debug uses
[MMC] Correct mmc_request_done comments
[MMC] Move set_ios debugging into mmc.c
[BLOCK] Fix oops on removal of SD/MMC card
[ARM] Allow SA1100 RTC alarm to be configured for wakeup
[ARM] rtc-sa1100: fix compiler warnings and error cleanup
[ARM] Update versatile_defconfig
[ARM] Update mach-types
[ARM] Fix thread struct allocator for SMP case
Sam Ravnborg:
kbuild: fix gen_initramfs_list.sh
kbuild: drivers/video/logo/ - fix ident glitch
Samuel Ortiz:
[IRDA]: New maintainer.
Samuel Thibault:
Input: allow using several chords for braille
Sascha Hauer:
[ARM] 3490/1: i.MX: move uart resources to board files
[ARM] 3501/1: i.MX: fix lowlevel debug macros
Satoru Takeuchi:
[IA64] eliminate compile time warnings
[IA64] eliminate compile time warnings
Sergei Shtylyov:
[SERIAL] AMD Alchemy UART: claim memory range
Fix RTL8019AS init for Toshiba RBTX49xx boards
Shaohua Li:
timer TSC check suspend notifier change
Shaun Pereira:
[X25]: fix for spinlock recurse and spinlock lockup with timer handler
shin, jacob:
slab: fix crash on __drain_alien_cahce() during CPU Hotplug
Soyoung Park:
[NETLINK]: cleanup unused macro in net/netlink/af_netlink.c
Sridhar Samudrala:
[SCTP]: Fix panic's when receiving fragmented SCTP control chunks.
[SCTP]: Fix state table entries for chunks received in CLOSED state.
Stefan Bader:
s390: enable interrupts on error path
s390: tape 3590 changes
Stefan Rompf:
Input: wistron - add signature for Amilo M7400
[NET]: Add missing operstates documentation.
Stefano Brivio:
bcm43xx: check for valid MAC address in SPROM
Stephen Hemminger:
[PKT_SCHED] netem: fix loss
[BRIDGE]: keep track of received multicast packets
[CLASS DEVICE]: add attribute_group creation
[NET]: Create netdev attribute_groups with class_device_add
sky2: backout NAPI reschedule
sky2: status irq hang fix
sky2: tx ring index mask fix
sky2: use mask instead of modulo operation
sky2: edge triggered workaround enhancement
sky2: dont write status ring
sky2: synchronize irq on remove
Add more support for the Yukon Ultra chip found in dual core centino laptops.
sky2: version 1.3
[NET]: Do sysfs registration as part of register_netdevice.
[BRIDGE]: Do sysfs registration inside rtnl.
sky2: ifdown kills irq mask
Stephen Smalley:
selinux: Clear selinux_enabled flag upon runtime disable.
Steve Grubb:
sockaddr patch
audit inode patch
change lspp ipc auditing
Reworked patch for labels on user space messages
More user space subject labels
Rework of IPC auditing
Audit Filter Performance
Steven Finney:
[ALSA] Handle the error correctly in SNDCTL_DSP_SETFMT ioctl
Takashi Iwai:
[ALSA] hda-codec - Use model 'hp' for all HP laptops with AD1981HD
[ALSA] hda-codec - Add entry for Epox EP-5LDA+ GLi
[ALSA] Fix double free in error path of miro driver
[ALSA] intel8x0 - Disable ALI5455 SPDIF-input
[ALSA] hda-codec - Add model entry for ASUS M9 laptop
[ALSA] hda-codec - Add codec id for AD1988B codec chip
[ALSA] Fix Oops at rmmod with CONFIG_SND_VERBOSE_PROCFS=n
[ALSA] hda-codec - Fix capture from line-in on VAIO SZ/FE laptops
[ALSA] hda-codec - Add model entry for ASUS Z62F
[ALSA] via82xx - Use DXS_SRC as default for VIA8235/8237/8251 chips
Tony Luck:
[IA64] wire up compat_sys_adjtimex()
Trond Myklebust:
fs/locks.c: Fix lease_init
Uwe Zeisberger:
[ARM] 3488/1: make icedcc_putc do the right thing
[ARM] 3496/1: more constants for asm-offsets.h
Victor V. Vengerov:
uml: fix iomem list traversal
Vitaly Bordug:
ppc32: odd fixes and improvements in ppc_sys
ppc32 CPM_UART: Convert to use platform devices
ppc32: Update board-specific code of the CPM UART users
ppc32 CPM_UART: Fixed odd address translations
ppc32 CPM_UART: Fixed break send on SCC
ppc32 CPM_UART: fixes and improvements
Vladislav Yasevich:
[SCTP]: Prevent possible infinite recursion with multiple bundled DATA.
Wang Jun:
USB: add new iTegno usb CDMA 1x card support for pl2303
Wei Yongjun:
[IPV4]: ip_options_fragment() has no effect on fragmentation
YOSHIFUJI Hideaki:
[IPV6]: Fix race in route selection.
Zach Brown:
[SCSI] qla2xxx: only free_irq() after request_irq() succeeds
Zachary Amsden:
x86/PAE: Fix pte_clear for the >4GB RAM case
Linus Torvalds <[email protected]> wrote:
>
> Ok, I've let the release time between -rc's slide a bit too much again,
> but -rc4 is out there, and this is the time to hunker down for 2.6.17.
I have rather a lot of stuff still queued:
selinux-check-for-failed-kmalloc-in-security_sid_to_context.patch
fs-openc-unexport-sys_openat.patch
autofs4-nfy_none-wait-race-fix.patch
autofs4-nfy_none-wait-race-fix-tidy.patch
fix-capi-reload-by-unregistering-the-correct-major.patch
tpm-update-module-dependencies.patch
pcmcia-oopses-fixes.patch
via-quirk-fixup-additional-pci-ids.patch
rcu-introduce-rcu_needs_cpu-interface.patch
rcu-introduce-rcu_needs_cpu-interface-fix.patch
s390-exploit-rcu_needs_cpu-interface.patch
setup_per_zone_pages_min-overflow-fix.patch
s390-lcs-incorrect-test.patch
initramfs-fix-cpio-hardlink-check.patch
s390-add-vmsplice-system-call.patch
symbol_put_addr-locks-kernel.patch
contact-info-update.patch
smbfs-fix-slab-corruption-in-samba-error-path.patch
add-slab_is_available-routine-for-boot-code.patch
x86_64-disable-aperture-pci-region-check-in-amd64.patch
x86_64-check-for-too-many-northbridges-in-iommu.patch
led-improve-kconfig-information.patch
backlight-lcd-class-fix-sysfs-_store-error-handling.patch
led-add-maintainer-entry-for-the-led-subsystem.patch
led-fix-sysfs-store-function-error-handling.patch
v9fs-twalk-memory-leak.patch
v9fs-signal-handling-fixes.patch
fix-can_share_swap_page-when-config_swap.patch
add-core-solo-and-core-duo-support-to-oprofile.patch
tpm-fix-constant.patch
final-rio-polish.patch
tpm_register_hardware-gcc-41-warning-fix.patch
fs-compatc-fix-if-a-=-b-typo.patch
root-mount-failure-emit-filesystems-attempted.patch
Some of which I still need originator confirmation from. Maybe tomorrow,
more likely the day after..
On Thu, May 11, 2006 at 04:44:03PM -0700, Linus Torvalds wrote:
> Ok, I've let the release time between -rc's slide a bit too much again,
> but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
> If you know of any regressions, please holler now, so that we don't miss
> them.
I got assertion failures in the bcm43xx driver:
bcm43xx: Chip ID 0x4318, rev 0x2
bcm43xx: Number of cores: 4
bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled
bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7
bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
bcm43xx: PHY connected
bcm43xx: Radio turned on
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
bcm43xx: Chip initialized
bcm43xx: DMA initialized
bcm43xx: 80211 cores initialized
bcm43xx: Keys cleared
ADDRCONF(NETDEV_UP): eth2: link is not ready
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair()
ieee80211_crypt: registered algorithm 'WEP'
Erik
--
+-- Erik Mouw -- http://www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
On Friday 12 May 2006 12:24, you wrote:
> On Thu, May 11, 2006 at 04:44:03PM -0700, Linus Torvalds wrote:
> > Ok, I've let the release time between -rc's slide a bit too much again,
> > but -rc4 is out there, and this is the time to hunker down for 2.6.17.
> >
> > If you know of any regressions, please holler now, so that we don't miss
> > them.
>
> I got assertion failures in the bcm43xx driver:
>
> bcm43xx: Chip ID 0x4318, rev 0x2
That is expected an non-fatal.
It is no regression.
We are working on it, but there won't be any fix for 2.6.17, as
very intrusive changes are needed to fix this.
--
Greetings Michael.
Andrew Morton wrote:
> I have rather a lot of stuff still queued:
Can you please upload them somewhere? Maybe a "hot-fixes" directory like
with the mm-kernel. I do not want a kernel with known bugs with known
fixes, would be cool to be able to apply all those before testing :)
Or is there some other place already, where I can grab the list from?
Regards,
Stefan
On Fri, May 12, 2006 at 12:44:22PM +0200, Michael Buesch wrote:
> On Friday 12 May 2006 12:24, you wrote:
> > On Thu, May 11, 2006 at 04:44:03PM -0700, Linus Torvalds wrote:
> > > Ok, I've let the release time between -rc's slide a bit too much again,
> > > but -rc4 is out there, and this is the time to hunker down for 2.6.17.
> > >
> > > If you know of any regressions, please holler now, so that we don't miss
> > > them.
> >
> > I got assertion failures in the bcm43xx driver:
> >
> > bcm43xx: Chip ID 0x4318, rev 0x2
>
> That is expected an non-fatal.
Assertion failed sounds rather fatal to me.
> It is no regression.
It is, I didn't see it in 2.6.17-rc3.
> We are working on it, but there won't be any fix for 2.6.17, as
> very intrusive changes are needed to fix this.
If it's non-fatal, could you remove the assertion, or make it print
something that sounds less fatal?
Erik
--
+-- Erik Mouw -- http://www.harddisk-recovery.com -- +31 70 370 12 90 --
| Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands
Linus Torvalds <[email protected]> writes:
> Ok, I've let the release time between -rc's slide a bit too much again,
> but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
> If you know of any regressions, please holler now, so that we don't miss
> them.
b44 on x86-64 is currently broken on systems with >1GB. This affects
some people's laptops and is a regression. I have patches that I will
send soon, just waiting for feedback.
-Andi
On Thu, May 11, 2006, Linus Torvalds wrote:
>
> Ok, I've let the release time between -rc's slide a bit too much again,
> but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
> If you know of any regressions, please holler now, so that we don't miss
> them.
Not a recent regression, but symbol_put_addr() will solidly
deadlock. A patch has been posted twice, but got no
response. I would like to see symbol_put_addr() fixed
in 2.6.17.
I attach a previous mail where I explain why we would
like to use this for DVB stuff. You can also find
the original postings here:
http://lkml.org/lkml/2006/4/28/226
http://lkml.org/lkml/2006/5/4/194
symbol_put_addr() currently has no users, that's
why the brokenness went unnoticed for so long.
Johannes
>
>Ok, I've let the release time between -rc's slide a bit too much again,
>but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
>If you know of any regressions, please holler now, so that we don't miss
>them.
>
Not really regressions, but longstanding issues:
http://lkml.org/lkml/2005/7/7/255
http://lkml.org/lkml/2006/5/9/40
May as well wait for 2.6.18-rcX, your decision.
Jan Engelhardt
--
On Friday 12 May 2006 13:47, you wrote:
> On Fri, May 12, 2006 at 12:44:22PM +0200, Michael Buesch wrote:
> > On Friday 12 May 2006 12:24, you wrote:
> > > On Thu, May 11, 2006 at 04:44:03PM -0700, Linus Torvalds wrote:
> > > > Ok, I've let the release time between -rc's slide a bit too much again,
> > > > but -rc4 is out there, and this is the time to hunker down for 2.6.17.
> > > >
> > > > If you know of any regressions, please holler now, so that we don't miss
> > > > them.
> > >
> > > I got assertion failures in the bcm43xx driver:
> > >
> > > bcm43xx: Chip ID 0x4318, rev 0x2
> >
> > That is expected an non-fatal.
>
> Assertion failed sounds rather fatal to me.
But it is not fatal. Trust me. I am the author of most of the code.
The worst thing that can happen is that the card does not work.
The best thing that can happen is that it works with some luck.
> > It is no regression.
>
> It is, I didn't see it in 2.6.17-rc3.
You did not look close enough.
> > We are working on it, but there won't be any fix for 2.6.17, as
> > very intrusive changes are needed to fix this.
>
> If it's non-fatal, could you remove the assertion, or make it print
> something that sounds less fatal?
Well, the backtrace could be removed.
But I am for not removing the assertions completely, because
this way people don't see what is going on, if the device does not
work.
It is non-fatal in the sense that it does not crash the machine.
It _may_ be fatal, that the device does not work. The
driver is CONFIG_EXPERIMENTAL for some reason.
To say it again: The 4318 is not completely supported, yet.
It may work with some luck, but it is not guaranteed and only
lower bitrates are supported.
--
Greetings Michael.
On Friday 12 May 2006 00:44, Linus Torvalds wrote:
> Ok, I've let the release time between -rc's slide a bit too much again,
> but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
> If you know of any regressions, please holler now, so that we don't miss
> them.
>
> -rc4 itself is mainly random driver fixes (sound, infiniband, scsi,
> network drivers), but some splice fixes too and some arch (arm, powerpc,
> mips) updates. Shortlog follows,
Linus,
I've got an oops in the forcedeth driver on shutdown. Sorry for the crappy
camera phone pictures, this board doesn't have RS232 ports:
http://devzero.co.uk/~alistair/oops-20060512/
It was initially difficult to reproduce, but I found I could do so reliably if
I ssh'ed into the box and halted it remotely, then it would always oops on
shutdown. I assume this is because the driver is still active when something
happens to it during halt.
There's been just a single commit since -rc3:
forcedeth: fix multi irq issues
ebf34c9b6fcd22338ef764b039b3ac55ed0e297b
However, it could have just been hidden since before -rc3, so I'll try to work
backwards if nobody has any immediate ideas..
--
Cheers,
Alistair.
Third year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
Alistair John Strachan wrote:
> On Friday 12 May 2006 00:44, Linus Torvalds wrote:
>
>>Ok, I've let the release time between -rc's slide a bit too much again,
>>but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>>
>>If you know of any regressions, please holler now, so that we don't miss
>>them.
>>
>>-rc4 itself is mainly random driver fixes (sound, infiniband, scsi,
>>network drivers), but some splice fixes too and some arch (arm, powerpc,
>>mips) updates. Shortlog follows,
>
>
> Linus,
>
> I've got an oops in the forcedeth driver on shutdown. Sorry for the crappy
> camera phone pictures, this board doesn't have RS232 ports:
>
> http://devzero.co.uk/~alistair/oops-20060512/
>
> It was initially difficult to reproduce, but I found I could do so reliably if
> I ssh'ed into the box and halted it remotely, then it would always oops on
> shutdown. I assume this is because the driver is still active when something
> happens to it during halt.
>
> There's been just a single commit since -rc3:
>
> forcedeth: fix multi irq issues
> ebf34c9b6fcd22338ef764b039b3ac55ed0e297b
>
> However, it could have just been hidden since before -rc3, so I'll try to work
> backwards if nobody has any immediate ideas..
>
The interrupt handler could be called during the same time (on different
cpu) the dev->stop function is clearing out the rings (nv_txrx_reset).
On Sunday 14 May 2006 08:57, Ayaz Abdulla wrote:
> Alistair John Strachan wrote:
[snip]
> > There's been just a single commit since -rc3:
> >
> > forcedeth: fix multi irq issues
> > ebf34c9b6fcd22338ef764b039b3ac55ed0e297b
> >
> > However, it could have just been hidden since before -rc3, so I'll try to
> > work backwards if nobody has any immediate ideas..
>
> The interrupt handler could be called during the same time (on different
> cpu) the dev->stop function is clearing out the rings (nv_txrx_reset).
FWIW, I can't reproduce the fault with the commitdiff
ebf34c9b6fcd22338ef764b039b3ac55ed0e297b reverted.
--
Cheers,
Alistair.
Third year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.
On Thu, 2006-05-11 at 23:39 -0700, Andrew Morton wrote:
> Linus Torvalds <[email protected]> wrote:
> >
> > Ok, I've let the release time between -rc's slide a bit too much again,
> > but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
I have at least one hot fix too pending confirmation by paulus (some
machine probe time that could harm various stuffs by mis-identifying
pseries at boot), and possibly another I'm still tracking (looks like
ide_unregister is broken but I'm still trying to isolate the bug,
definitely a regression though but might be a couple of kernels old)
Ben.
On Iau, 2006-05-11 at 16:44 -0700, Linus Torvalds wrote:
> Ok, I've let the release time between -rc's slide a bit too much again,
> but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
> If you know of any regressions, please holler now, so that we don't miss
> them.
PCMCIA is the obvious one I'm hitting here. The pcmcia core code as well
as being somewhat unreadable will happily hand out shared IRQs to
drivers that ask for an exclusive one leading to setup_irq errors and
non-working devices.
The main problem seems to be that the kernel will hand back the shared
PCI IRQ for a pcmcia port even when ExclusiveIRQ is requested. I've got
a patch here to clean this up a bit, but it changes the API to pass back
the fact the available IRQ is shared rather than force it, so may not be
a good candidate close to 2.6.17
With CONFIG_NUMA set, kmem_cache_destroy() may fail and say "Can't
free all objects." The problem is caused by sequences such as the
following (suppose we are on a NUMA machine with two nodes, 0 and 1):
* Allocate an object from cache on node 0.
* Free the object on node 1. The object is put into node 1's alien
array_cache for node 0.
* Call kmem_cache_destroy(), which ultimately ends up in __cache_shrink().
* __cache_shrink() does drain_cpu_caches(), which loops through all nodes.
For each node it drains the shared array_cache and then handles the
alien array_cache for the other node.
However this means that node 0's shared array_cache will be drained,
and then node 1 will move the contents of its alien[0] array_cache
into that same shared array_cache. node 0's shared array_cache is
never looked at again, so the objects left there will appear to be in
use when __cache_shrink() calls __node_shrink() for node 0. So
__node_shrink() will return 1 and kmem_cache_destroy() will fail.
This patch fixes this by having drain_cpu_caches() do
drain_alien_cache() on every node before it does drain_array() on the
nodes' shared array_caches.
The problem was originally reported by Or Gerlitz <[email protected]>.
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Signed-off-by: Roland Dreier <[email protected]>
---
I get a nervous feeling about touching NUMA slab code, because just
the topic alone makes it sound hairy. But I think my diagnosis and
fix are pretty clear, and this definitely fixes crashes seen when
unloading IB modules. It's a regression from 2.6.16, and x86_64
machines with > 1 NUMA node are quite common, so this probably should
go into 2.6.17.
diff --git a/mm/slab.c b/mm/slab.c
index c32af7e..cb747be 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -2192,11 +2192,14 @@ static void drain_cpu_caches(struct kmem
check_irq_on();
for_each_online_node(node) {
l3 = cachep->nodelists[node];
- if (l3) {
+ if (l3 && l3->alien)
+ drain_alien_cache(cachep, l3->alien);
+ }
+
+ for_each_online_node(node) {
+ l3 = cachep->nodelists[node];
+ if (l3)
drain_array(cachep, l3, l3->shared, 1, node);
- if (l3->alien)
- drain_alien_cache(cachep, l3->alien);
- }
}
}
On Mon, 15 May 2006, Roland Dreier wrote:
> This patch fixes this by having drain_cpu_caches() do
> drain_alien_cache() on every node before it does drain_array() on the
> nodes' shared array_caches.
Correct. That is the fix that I suggested earlier. The alien caches needs
to be drained first.
On Mon, 15 May 2006, Roland Dreier wrote:
> > This patch fixes this by having drain_cpu_caches() do
> > drain_alien_cache() on every node before it does drain_array() on the
> > nodes' shared array_caches.
On Mon, 2006-05-15 at 14:47 -0700, Christoph Lameter wrote:
> Correct. That is the fix that I suggested earlier. The alien caches needs
> to be drained first.
Yeah, looks good to me too. Thanks Roland!
Pekka
Roland Dreier wrote:
> With CONFIG_NUMA set, kmem_cache_destroy() may fail and say "Can't
> free all objects." The problem is caused by sequences such as the
> following (suppose we are on a NUMA machine with two nodes, 0 and 1):
>
> * Allocate an object from cache on node 0.
> * Free the object on node 1. The object is put into node 1's alien
> array_cache for node 0.
> * Call kmem_cache_destroy(), which ultimately ends up in __cache_shrink().
> * __cache_shrink() does drain_cpu_caches(), which loops through all nodes.
> For each node it drains the shared array_cache and then handles the
> alien array_cache for the other node.
>
> However this means that node 0's shared array_cache will be drained,
> and then node 1 will move the contents of its alien[0] array_cache
> into that same shared array_cache. node 0's shared array_cache is
> never looked at again, so the objects left there will appear to be in
> use when __cache_shrink() calls __node_shrink() for node 0. So
> __node_shrink() will return 1 and kmem_cache_destroy() will fail.
>
> This patch fixes this by having drain_cpu_caches() do
> drain_alien_cache() on every node before it does drain_array() on the
> nodes' shared array_caches.
>
> The problem was originally reported by Or Gerlitz <[email protected]>.
>
> Cc: Christoph Lameter <[email protected]>
> Cc: Pekka Enberg <[email protected]>
OK, Indeed i have CONFIG_NUMA and yes, the patch fixes my problem,
thanks a lot for working on that!
Or.
>
>Ok, I've let the release time between -rc's slide a bit too much again,
>but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
For fun, I cross-compiled a sparc64 kernel from i686:
...
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
Building modules, stage 2.
MODPOST
WARNING: vmlinux: 'sys_close' exported twice. Previous export was in
vmlinux
WARNING: arch/sparc64/solaris/solaris.o - Section mismatch: reference to
.init.text:init_socksys from .text between 'init_module' (at offset 0x2ff0)
and 'cleanup_module'
WARNING: "execve" [drivers/sbus/char/envctrl.ko] undefined!
WARNING: "execve" [drivers/sbus/char/bbc.ko] undefined!
WARNING: "ds1287_regs" [drivers/char/rtc.ko] undefined!
WARNING: "rtc_lock" [drivers/char/rtc.ko] undefined!
WARNING: "sparc_floppy_irq" [drivers/block/floppy.ko] undefined!
WARNING: "mem_map_zero" [arch/sparc64/kernel/binfmt_elf32.ko] undefined!
WARNING: "get_random_int" [arch/sparc64/kernel/binfmt_elf32.ko] undefined!
WARNING: "arch_pick_mmap_layout" [arch/sparc64/kernel/binfmt_elf32.ko]
undefined!
WARNING: "randomize_va_space" [arch/sparc64/kernel/binfmt_elf32.ko]
undefined!
dot config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc4
# Tue May 16 18:52:16 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_SYSVIPC_COMPAT=y
#
# General machine setup
#
CONFIG_SMP=y
# CONFIG_PREEMPT is not set
CONFIG_NR_CPUS=2
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_US3_FREQ=m
CONFIG_US2E_FREQ=m
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HUGETLB_PAGE_SIZE_4MB=y
# CONFIG_HUGETLB_PAGE_SIZE_512K is not set
# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_LARGE_ALLOCS=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_SUN_AUXIO=y
CONFIG_SUN_IO=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_BINFMT_ELF32=m
CONFIG_BINFMT_AOUT32=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_SUNOS_EMUL=y
CONFIG_SOLARIS_EMUL=m
CONFIG_SCHED_SMT=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
CONFIG_NET_SCH_CLK_CPU=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_SUNBPP=m
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGICPTI is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_SUNLANCE is not set
CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_SPARCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=m
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
#
# Non-8250 serial port support
#
CONFIG_SERIAL_SUNCORE=y
# CONFIG_SERIAL_SUNZILOG is not set
CONFIG_SERIAL_SUNSU=y
CONFIG_SERIAL_SUNSU_CONSOLE=y
CONFIG_SERIAL_SUNSAB=y
CONFIG_SERIAL_SUNSAB_CONSOLE=y
CONFIG_SERIAL_SUNHV=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_SBUS=y
CONFIG_FB_BW2=y
CONFIG_FB_CG3=y
CONFIG_FB_CG6=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_FFB is not set
# CONFIG_FB_TCX is not set
# CONFIG_FB_CG14 is not set
# CONFIG_FB_P9100 is not set
# CONFIG_FB_LEO is not set
CONFIG_FB_PCI=y
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_PROM_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SUN_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_TEST is not set
#
# Misc Linux/SPARC drivers
#
CONFIG_SUN_OPENPROMIO=m
CONFIG_SUN_MOSTEK_RTC=y
CONFIG_OBP_FLASH=m
# CONFIG_SUN_BPP is not set
CONFIG_BBC_I2C=m
CONFIG_ENVCTRL=m
# CONFIG_DISPLAY7SEG is not set
#
# Fibre Channel support
#
# CONFIG_FC4 is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="iso8859-1"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SECLVL=m
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
Jan Engelhardt
--
>
>Ok, I've let the release time between -rc's slide a bit too much again,
>but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
For fun #2, I cross-compiled a x86_64 kernel from i686:
Kernel: arch/x86_64/boot/bzImage is ready (#1)
Building modules, stage 2.
MODPOST
WARNING: drivers/acpi/processor.o - Section mismatch: reference to
.init.data: from .text.acpi_processor_power_init after
'acpi_processor_power_init' (at offset 0x1d)
Is this a general issue of cross-compiling (see other message by me)?
dot config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc4
# Tue May 16 18:58:11 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
CONFIG_NR_CPUS=4
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HPET_TIMER=y
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_REORDER=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_HOTPLUG_MEMORY=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_FWMARK is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
# CONFIG_IEEE80211_SOFTMAC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=m
CONFIG_SCSI_SATA_AHCI=m
CONFIG_SCSI_SATA_SVW=m
CONFIG_SCSI_ATA_PIIX=m
CONFIG_SCSI_SATA_MV=m
CONFIG_SCSI_SATA_NV=m
CONFIG_SCSI_PDC_ADMA=m
CONFIG_SCSI_SATA_QSTOR=m
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_SX4=m
CONFIG_SCSI_SATA_SIL=m
CONFIG_SCSI_SATA_SIL24=m
CONFIG_SCSI_SATA_SIS=m
CONFIG_SCSI_SATA_ULI=m
CONFIG_SCSI_SATA_VIA=m
CONFIG_SCSI_SATA_VITESSE=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_RTC_IRQ=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
# CONFIG_IPATH_CORE is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_TEST is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="iso8859-1"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_IOMMU_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SECLVL=m
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
Jan Engelhardt
--
On 5/11/06, Linus Torvalds <[email protected]> wrote:
> If you know of any regressions, please holler now, so that we don't miss
> them.
I wouldn't guess this was intentional, was it?
--- arch/i386/Kconfig 2006-03-28 12:11:29.000000000 -0800
+++ ../linux/arch/i386/Kconfig 2006-05-15 14:51:56.000000000 -0700
@@ -451,7 +467,7 @@
choice
depends on EXPERIMENTAL && !X86_PAE
- prompt "Memory split"
+ prompt "Memory split" if EMBEDDED
default VMSPLIT_3G
help
Select the desired split between kernel and user memory.
--
avuton
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
On 5/11/06, Linus Torvalds <[email protected]> wrote:
>
> Ok, I've let the release time between -rc's slide a bit too much again,
> but -rc4 is out there, and this is the time to hunker down for 2.6.17.
>
> If you know of any regressions, please holler now, so that we don't miss
> them.
>
> -rc4 itself is mainly random driver fixes (sound, infiniband, scsi,
> network drivers), but some splice fixes too and some arch (arm, powerpc,
> mips) updates. Shortlog follows,
>
> Linus
>
> ---
> Adrian Bunk:
> [SCSI] megaraid/megaraid_mm.c: fix a NULL pointer dereference
> [ALSA] sound/pci/: remove duplicate #include's
> Kobject: possible cleanups
> re-add the OSS SOUND_CS4232 option
> [IRDA]: Removing unused EXPORT_SYMBOLs
>
> Akinobu Mita:
> [NET]: use hlist_unhashed()
>
> Al Viro:
> deal with deadlocks in audit_free()
> move call of audit_free() into do_exit()
> drop gfp_mask in audit_log_exit()
> drop task argument of audit_syscall_{entry,exit}
> no need to wank with task_lock() and pinning task down in audit_syscall_exit()
>
> Alan Modra:
> powerpc64: Fix loading of modules without a .toc section
>
> Alan Stern:
> USB: net2280: Handle STALLs for 0-length control-IN requests
> USB: net2280: send 0-length packets for ep0
> USB: net2280: check for shared IRQs
> USB: net2280: set driver data before it is used
> [NET]: Make netdev_chain a raw notifier.
>
> Alexey Kuznetsov:
> [IPV6]: skb leakage in inet6_csk_xmit
>
> Ananth N Mavinakayanahalli:
> powerpc/kprobes: fix singlestep out-of-line
>
> Andi Kleen:
> Mark VMSPLIT EMBEDDED
> x86_64: Add compat_sys_vmsplice and use it in x86-64
> i386/x86-64: Fix ACPI disabled LAPIC handling mismerge
> i386: Fix overflow in e820_all_mapped
> i386: Remove apic= warning
> Remove wrong cpu_has_apic checks that came from mismerging
> x86_64: Check for too many northbridges in IOMMU code
> x86_64: Avoid EBDA area in early boot allocator
> x86_64: Move ondemand timer into own work queue
>
> Andreas Herrmann:
> s390: qdio memory allocations
>
> Andreas Schwab:
> sound/ppc: snd_pmac_toonie_init should be __init
> powerpc: Wire up *at syscalls
>
> Andrew Morton:
> [SCSI] megaraid: unused variable
> request_irq(): remove warnings from irq probing
> silence initcall warnings
>
> Anton Blanchard:
> powerpc: Add cputable entry for POWER6
>
> Antonino A. Daplas:
> suspend: Documentation update for IBM Thinkpad X30
> asiliantfb: Add help text in Kconfig
>
> Arnd Bergmann:
> spufs: Disable local interrupts for SPE hash_page calls.
> powerpc: update cell_defconfig
>
> Ashok Raj:
> enable X86_PC for HOTPLUG_CPU
>
> Atsushi Nemoto:
> [MIPS] Fix ip27 build.
> [MIPS] Fix bitops for MIPS32/MIPS64 CPUs.
> [MIPS] Use __ffs() instead of ffs() in ip32_irq0().
> [MIPS] Sparse: fix sparse for 64-bit kernels.
> kbuild: fix modpost segfault for 64bit mipsel kernel
> RTC: rtc-dev tweak for 64-bit kernel
> genrtc: fix read on 64-bit platforms
>
> Ayaz Abdulla:
> forcedeth: fix multi irq issues
>
> Bastiaan Jacques:
> [ALSA] via82xx: add support for VIA VT8251 (AC'97)
> [ALSA] via82xx: tweak VT8251 workaround
>
> Bastian Blank:
> s390: make qeth buildable
>
> Bellido Nicolas:
> [ARM] 3503/1: Fix map_desc structure for aaec2000
> [ARM] 3504/1: Fix clcd includes for aaec2000
> [ARM] 3505/1: aaec2000: entry-macro.S needs asm/arch/irqs.h
> [ARM] 3506/1: aaec2000: debug-macro.S needs hardware.h
> [ARM] 3507/1: Replace map_desc.physical with map_desc.pfn: aaed2000
>
> Brent Casavant:
> [IA64] IOC4 config option ordering
> Altix: correct ioc4 port order
>
> Brian King:
> [SCSI] scsi: Add IBM 2104-DU3 to blist
>
> Bryan O'Sullivan:
> IB/ipath: fix race with exposing reset file
> IB/ipath: set up 32-bit DMA mask if 64-bit setup fails
> IB/ipath: iterate over correct number of ports during reset
> IB/ipath: change handling of PIO buffers
> IB/ipath: fix verbs registration
> IB/ipath: prevent hardware from being accessed during reset
> IB/ipath: simplify RC send posting
> IB/ipath: simplify IB timer usage
> IB/ipath: improve sparse annotation
> IB/ipath: fix label name in interrupt handler
> IB/ipath: tidy up white space in a few files
>
> Charis Kouzinopoulos:
> [ALSA] Fix typos and add information about Jack support to Audiophile-Usb.txt
>
> Chen, Kenneth W:
> [IA64] strcpy returns NULL pointer and not destination pointer
>
> Chris Dearman:
> [MIPS] 24K LV: Add core card id.
>
> Chris Wedgwood:
> PCI quirk: VIA IRQ fixup should only run for VIA southbridges
>
> Christian Borntraeger:
> s390: fix slab debugging
> s390: add read_mostly optimization
>
> Christoph Hellwig:
> [IRDA]: Switching to a workqueue for the SIR work
>
> Christoph Lameter:
> [IA64] Setup an IA64 specific reclaim distance
> page migration: Fix fallback behavior for dirty pages
>
> Chuck Ebbert:
> i386: fix broken FP exception handling
>
> Clemens Ladisch:
> [ALSA] add another Phase 26 quirk
>
> Cliff Wickman:
> [IA64] enable dumps to capture second page of kernel stack
>
> Corey Minyard:
> x86_64: fix die_lock nesting
> x86_64: add nmi_exit to die_nmi
>
> Craig Brind:
> via-rhine: zero pad short packets on Rhine I ethernet cards
>
> Daniel Drake:
> tipar oops fix
> softmac: don't reassociate if user asked for deauthentication
> softmac: make non-operational after being stopped
>
> Darrel Goeddel:
> support for context based audit filtering
> support for context based audit filtering, part 2
>
> Dave Jones:
> Avoid printing pointless tsc skew msgs
>
> David Brownell:
> [IRDA]: smsc-ircc: Minimal hotplug support.
>
> David Gibson:
> powerpc: Fix pagetable bloat for hugepages
>
> David S. Miller:
> [SPARC64]: Kill __flush_tlb_page() prototype.
> [SPARC64]: Disable preemption during flush_tlb_pending().
> [SPARC]: Hook up vmsplice into syscall tables.
>
> David Woodhouse:
> powerpc: Use check_legacy_ioport() on ppc32 too.
> bcm43xx: Fix access to non-existent PHY registers
>
> dean gaudet:
> off-by-1 in kernel/power/main.c
>
> Deepak Saxena:
> [ARM] 3487/1: IXP4xx: Support non-PCI systems
>
> Denis Vlasenko:
> [SCSI] aic7xxx: ahc_pci_write_config() fix
>
> Dmitry Torokhov:
> Input: allow passing NULL to input_free_device()
> Input: move input_device_id to mod_devicetable.h
> Input: psmouse - fix new device detection logic
> Input: ressurect EVIOCGREP and EVIOCSREP
> Input: make EVIOCGSND return meaningful data
>
> Eric Moore:
> [SCSI] fusion - bug fix stack overflow in mptbase
> [SCSI] mptspi: revalidate negotiation parameters after host reset and resume
>
> Eric Sesterhenn:
> [SCSI] Overrun in drivers/scsi/sim710.c
> fix array overrun in drivers/char/mwave/mwavedd.c
>
> Erik Mouw:
> [ALSA] PCMCIA sound devices shouldn't depend on ISA
>
> Eugene Surovegin:
> ppc32: add 440GX erratum 440_43 workaround
>
> Francois Romieu:
> dl2k: use DMA_48BIT_MASK constant
>
> FUJITA Tomonori:
> [SCSI] ibmvscsi: fix leak when failing to send srp event
>
> Gary Zambrano:
> [TG3]: Add reset_phy parameter to chip reset functions
>
> George G. Davis:
> [ARM] 3499/1: Fix VFP FPSCR corruption for double exception case
>
> Gerald Schaefer:
> s390: segment operation error codes
>
> Greg Kroah-Hartman:
> PCI: fix via irq SATA patch
>
> Harald Welte:
> [Cardman 40x0] Fix udev device creation
>
> Heiko Carstens:
> s390: instruction processing damage handling
> [IPV4]: inet_init() -> fs_initcall
> s390: fix ipd handling
> s390: bug in setup_rt_frame
>
> Henrik Kretzschmar:
> [ALSA] pcxhr - Fix a compiler warning on 64bit architectures
> [ALSA] add __devinitdata to all pci_device_id
>
> Herbert Valerio Riedel:
> au1000_eth.c: use ether_crc() from <linux/crc32.h>
> phy: mdiobus_register(): initialize all phy_map entries
>
> Herbert Xu:
> [IPSEC]: Fix IP ID selection
> [TCP]: Fix sock_orphan dead lock
> [DCCP]: Fix sock_orphan dead lock
> [NET] linkwatch: Handle jiffies wrap-around
>
> Horst Hummel:
> s390: dasd ioctl never returns
> s390: dasd device identifiers
>
> Hua Zhong:
> [TCP]: Fix unlikely usage in tcp_transmit_skb()
> [IPV4]: Remove likely in ip_rcv_finish()
>
> Ian Abbott:
> USB: ftdi_sio: add support for ASK RDR 400 series card reader
>
> Imre Deak:
> Input: ads7846 - add pen_down sysfs attribute
> Input: ads7846 - power down ADC a bit later
> Input: ads7846 - debouncing and rudimentary sample filtering
> Input: ads7846 - miscellaneous fixes
> Input: ads7846 - handle IRQs that were latched during disabled IRQs
> Input: ads7846 - report 0 pressure value along with pen up event
> Input: ads7846 - improve filtering for thumb press accuracy
>
> Ingo Molnar:
> [XFRM]: fix softirq-unsafe xfrm typemap->lock use
> [XFRM]: fix incorrect xfrm_state_afinfo_lock use
> [XFRM]: fix incorrect xfrm_policy_afinfo_lock use
>
> Ingo Oeser:
> PCI: Documentation: no more device ids
>
> Jack Steiner:
> [IA64] - Fix MAX_PXM_DOMAINS for systems with > 256 nodes
> [IA64-SGI] - Fix discover of nearest cpu node to IO node
> [IA64-SGI] - Reduce overhead of reading sn_topology
>
> James Bottomley:
> [SCSI] Fix DVD burning issues.
>
> James Cameron:
> sis900: phy for FoxCon motherboard
>
> James Smart:
> [SCSI] lpfc 8.1.5 : Fix Discovery processing for NPorts that hit nodev_tmo during discovery
> [SCSI] lpfc 8.1.5 : Use asynchronous ABTS completion to speed up abort completions
> [SCSI] lpfc 8.1.5 : Fixed FC protocol violation in handling of PRLO.
> [SCSI] lpfc 8.1.5 : Fix cleanup code in the lpfc_pci_probe_one() error code path
> [SCSI] lpfc 8.1.5 : Additional fixes to LOGO, PLOGI, and RSCN processing
> [SCSI] lpfc 8.1.5 : Misc small fixes
> [SCSI] lpfc 8.1.5 : Change version number to 8.1.5
> [SCSI] lpfc 8.1.6 : Fix Data Corruption in Bus Reset Path
>
> Jan Beulich:
> kbuild: Do not overwrite makefile as anohter user
>
> Jaroslav Kysela:
> [ALSA] PCM core - introduce CONFIG_SND_PCM_XRUN_DEBUG
>
> Jean Delvare:
> USB: Use new PCI_CLASS_SERIAL_USB_* defines
> Fix OCFS2 warning when DEBUG_FS is not enabled
> ieee80211: Fix A band channel count (resent)
>
> Jeff Dike:
> uml: clean up after MADVISE_REMOVE
> uml: update defconfig
> uml: error handling fixes
> uml: uml-makefile-nicer uses SYMLINK incorrectly
> uml: change timer initialization
>
> Jens Axboe:
> splice: switch to using page_cache_readahead()
> Add find_get_pages_contig(): contiguous variant of find_get_pages()
> splice: make the read-side do batched page lookups
> splice: fix bugs with stealing regular pipe pages
> splice: fix bugs in pipe_to_file()
> pipe: introduce ->pin() buffer operation
> Add ->splice_read/splice_write to def_blk_fops
> splice: call handle_ra_miss() on failure to lookup page
> pipe: enable atomic copying of pipe data to/from user space
> vmsplice: allow user to pass in gift pages
> vmsplice: fix badly placed end paranthesis
> splice: fix page LRU accounting
> vmsplice: restrict stealing a little more
> splice: fix unlocking of page on error ->prepare_write()
> splice: LRU fixups
> splice: rename remaining info variables to pipe
> splice: redo page lookup if add_to_page_cache() returns -EEXIST
> compat_sys_vmsplice: one-off in UIO_MAXIOV check
> [BLOCK] limit request_fn recursion
>
> Jens Osterkamp:
> spidernet: introduce new setting
> spidernet: enable support for bcm5461 ethernet phy
>
> Jeremy Kerr:
> powerpc: Allow devices to register with numa topology
> powerpc: cell: Add numa id to struct spu
>
> Jes Sorensen:
> [IA64] update sn2 defconfig
>
> Jesper Juhl:
> [IA64] Remove redundant NULL checks before kfree
> [SCSI] SCSI: aic7xxx_osm_pci resource leak fix.
> USB: Resource leak fix for whiteheat driver
> PCI: fix potential resource leak in drivers/pci/msi.c
> uml: remove NULL checks and add some CodingStyle
> [TG3]: Fix possible NULL deref in tg3_run_loopback().
>
> Jing Min Zhao:
> [NETFILTER]: H.323 helper: Change author's email address
>
> Joel H Schopp:
> spufs: fix for CONFIG_NUMA
>
> John Heffner:
> [TCP]: Fix snd_cwnd adjustments in tcp_highspeed.c
>
> John Reed Riley:
> Input: wistron - add support for Fujitsu N3510
>
> Jon Anders Haugum:
> [SERIAL] 8250: set divisor register correctly for AMD Alchemy SoC uart
>
> Jon Mason:
> [IA64] remove asm-ia64/bitops.h self-inclusion
>
> Jon Smirl:
> Frame buffer: remove cmap sysfs interface
>
> Joris van Rantwijk:
> uml: skas0 support for 2G/2G hosts
>
> Ju, Seokmann:
> [SCSI] megaraid_{mm,mbox}: fix a bug in reset handler
>
> Juha Yrjola:
> Input: ads7846 - use msleep() instead of udelay() in suspend
>
> Kay Sievers:
> Kobject: fix build error
>
> Kenrik Kretzschmar:
> [ALSA] adding __devinitdata to pci_device_id
>
> Kimball Murray:
> x86_64: avoid IRQ0 ioapic pin collision
>
> Laurent Meyer:
> s390: alternate signal stack handling bug
>
> Linas Vepstas:
> powerpc/pseries: avoid crash in PCI code if mem system not up
>
> Linus Torvalds:
> [SCSI] advansys driver: limp along on x86
> CREDITS file update (Tristan Greaves)
> Fix ptrace_attach()/ptrace_traceme()/de_thread() race
> Revert "kbuild: fix modpost segfault for 64bit mipsel kernel"
> ptrace_attach: fix possible deadlock schenario with irqs
> Linux v2.6.17-rc4
>
> Luiz Fernando N. Capitulino:
> USB: ftdi_sio: Adds support for iPlus device.
>
> mao, bibo:
> kprobe cleanup for VM_MASK judgement
>
> Marcelo Tosatti:
> ppc32/8xx: Fix r3 trashing due to 8MB TLB page instantiation
>
> mark gross:
> EDAC Coexistence with BIOS
>
> Markus Gutschke:
> [ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macros
>
> Martin Schwidefsky:
> s390: futex atomic operations
> s390: new system calls
>
> Masami Hiramatsu:
> kprobe: fix resume execution on i386
>
> Mattia Dongili:
> uml: search from uml_net in a more reasonable PATH
>
> [email protected]:
> [SCSI] mptfc: race between mptfc_register_dev and mptfc_target_alloc
>
> Michael Buesch:
> bcm43xx: fix iwmode crash when down
> bcm43xx: Fix array overrun in bcm43xx_geo_init
>
> Michael Chan:
> [TG3]: Call netif_carrier_off() during phy reset
> [TG3]: Add phy workaround
> [TG3]: Reset chip when changing MAC address
> [TG3]: Fix bug in nvram write
> [TG3]: Update version and reldate
>
> Michael Reed:
> [SCSI] qla2xxx: Correct eh_abort recovery logic.
>
> Michael S. Tsirkin:
> IB/mthca: FMR ioremap fix
>
> Mikael Pettersson:
> x86_64: make PC Speaker driver work
>
> Mike Habeck:
> [IA64-SGI] fix SGI Altix tioce_reserve_m32() bug
>
> Mike Kravetz:
> sparsemem interaction with memory add bug fixes
>
> Mingming Cao:
> ext3: multile block allocate little endian fixes
>
> Moore, Eric:
> [SCSI] mptfusion: bug fix's for raid components adding/deleting
> [SCSI] - fusion - mptfc bug fix's to prevent deadlock situations
>
> Nathan Bronson:
> USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USB
>
> Nathan Scott:
> [XFS] Fix a possible forced shutdown due to mishandling write barriers
> [XFS] Fix a project quota space accounting leak on rename.
> [XFS] Fix a possible metadata buffer (AGFL) refcount leak when fixing an
>
> Neil Horman:
> [SCTP]: Allow spillover of receive buffer to avoid deadlock.
>
> NeilBrown:
> md: Avoid oops when attempting to fix read errors on raid10
> md: Fixed refcounting/locking when attempting read error correction in raid10
> md: Change ENOTSUPP to EOPNOTSUPP
> md: Improve detection of lack of barrier support in raid1
> md: Fix 'rdev->nr_pending' count when retrying barrier requests
>
> Nicolas Pitre:
> [ARM] 3494/1: asm-arm/bug.h needs linux/stddef.h
> [ARM] 3500/1: fix PXA27x DMA allocation priority
> [ARM] 3495/1: EABI: undefine removed syscalls, but...
>
> Olaf Hering:
> mv643xx_eth: provide sysfs class device symlink
>
> Olivier Blondeau:
> USB: storage: atmel unusual dev update
>
> Paolo 'Blaisorblade' Giarrusso:
> uml: fix patch mismerge
> uml: use Kbuild tracking for all files and fix compilation output
> uml: fix compilation and execution with hardened GCC
> uml: cleanup unprofile expression and build infrastructure
> uml: export symbols added by GCC hardened
>
> Paolo Ciarrocchi:
> Added URI of "linux kernel development process"
>
> Pat Gefre:
> Altix: correct ioc3 port order
>
> Patrick Caulfield:
> [DECNET]: Fix level1 router hello
>
> Patrick McHardy:
> [NETFILTER] x_tables: fix compat related crash on non-x86
> [NETFILTER] SCTP conntrack: fix infinite loop
> [NETFILTER]: H.323 helper: fix endless loop caused by invalid TPKT len
> [NETFILTER]: H.323 helper: fix use of uninitialized data
> [NETFILTER]: NAT: silence unused variable warnings with CONFIG_XFRM=n
> [NETFILTER]: x_tables: don't use __copy_{from,to}_user on unchecked memory in compat layer
> [NET_SCHED]: HFSC: fix thinko in hfsc_adjust_levels()
>
> Paul Mackerras:
> powerpc/pseries: Tell firmware our capabilities on new machines
> powerpc: Fix incorrect might_sleep in __get_user/__put_user on kernel addresses
> powerpc: Use the ibm,pa-features property if available
> powerpc/32: Define an is_kernel_addr() to fix ARCH=ppc compilation
>
> Pavel Machek:
> [ARM] 3508/1: Update collie defconfig
>
> Pavel Pisa:
> [ARM] 3485/1: i.MX: MX1 SD/MMC fix of unintentional double start possibility
>
> Pavel Roskin:
> kbuild: removing .tmp_versions considered harmful
>
> Peter Oberparleiter:
> s390: fix I/O termination race in cio
>
> Phil Dibowitz:
> USB: Storage: unusual devs update
>
> Ralf Baechle:
> [MIPS] Fix oprofile module unloading
> [MIPS] Oprofile: fix sparse warning.
> [MIPS] Kconfig: Clarify description of CROSSCOMPILE.
> [MIPS] Get rid of CONFIG_ADVANCED.
> [MIPS] Update MIPS defconfigs.
> [MIPS] Cleanup inode->r_dev usage.
> [MIPS] Fix branch emulation for floating-point exceptions.
> au1200fb: Remove accidentally duplicated content of au1200fb.c
> [ROSE]: Remove useless prototype for rose_remove_neigh().
> [AX.25]: Spelling fix
> [AX25, ROSE]: Remove useless SET_MODULE_OWNER calls.
> [AX.25]: Move AX.25 symbol exports
> [ROSE]: Fix routing table locking in rose_remove_neigh.
> [AX.25]: Eleminate HZ from AX.25 kernel interfaces
> [NETROM]: Eleminate HZ from NET/ROM kernel interfaces
> [ROSE]: Eleminate HZ from ROSE kernel interfaces
> [NETROM/ROSE]: Kill module init version kernel log messages.
>
> Ralf Baechle DL5RB:
> [HAMRADIO]: Remove remaining SET_MODULE_OWNER calls from hamradio drivers.
>
> Ralph Campbell:
> IB: Fix display of 4-bit port counters in sysfs
>
> Randy Dunlap:
> kbuild modpost - relax driver data name
> [IRDA] irda-usb: use NULL instead of 0
>
> Rene Herman:
> [ALSA] continue on IS_ERR from platform device registration
>
> Richard Purdie:
> Input: spitzkbd - fix the reversed Address and Calender keys
>
> Roland Dreier:
> [SCSI] srp.h: avoid padding of structs
> IB/mthca: Fix offset in query_gid method
> IB/srp: Fix tracking of pending requests during error handling
> IB/mthca: Fix race in reference counting
> IPoIB: Free child interfaces properly
>
> Russ Anderson:
> [IA64] Remove unused variable in sn_sal.h
> [IA64-SGI] SN SAL call to inject memory errors
> [IA64] Add mca recovery failure messages
>
> Russell King:
> [SERIAL] Clean up serial locking when obtaining a reference to a port
> [SERIAL] Remove unconditional enable of TX irq for console
> [SERIAL] 8250: add locking to console write function
> [MMC] extend data timeout for writes
> [MMC] PXA and i.MX: don't avoid sending stop command on error
> [MMC] PXA: reduce the number of lines PXAMCI debug uses
> [MMC] Correct mmc_request_done comments
> [MMC] Move set_ios debugging into mmc.c
> [BLOCK] Fix oops on removal of SD/MMC card
> [ARM] Allow SA1100 RTC alarm to be configured for wakeup
> [ARM] rtc-sa1100: fix compiler warnings and error cleanup
> [ARM] Update versatile_defconfig
> [ARM] Update mach-types
> [ARM] Fix thread struct allocator for SMP case
>
> Sam Ravnborg:
> kbuild: fix gen_initramfs_list.sh
> kbuild: drivers/video/logo/ - fix ident glitch
>
> Samuel Ortiz:
> [IRDA]: New maintainer.
>
> Samuel Thibault:
> Input: allow using several chords for braille
>
> Sascha Hauer:
> [ARM] 3490/1: i.MX: move uart resources to board files
> [ARM] 3501/1: i.MX: fix lowlevel debug macros
>
> Satoru Takeuchi:
> [IA64] eliminate compile time warnings
> [IA64] eliminate compile time warnings
>
> Sergei Shtylyov:
> [SERIAL] AMD Alchemy UART: claim memory range
> Fix RTL8019AS init for Toshiba RBTX49xx boards
>
> Shaohua Li:
> timer TSC check suspend notifier change
>
> Shaun Pereira:
> [X25]: fix for spinlock recurse and spinlock lockup with timer handler
>
> shin, jacob:
> slab: fix crash on __drain_alien_cahce() during CPU Hotplug
>
> Soyoung Park:
> [NETLINK]: cleanup unused macro in net/netlink/af_netlink.c
>
> Sridhar Samudrala:
> [SCTP]: Fix panic's when receiving fragmented SCTP control chunks.
> [SCTP]: Fix state table entries for chunks received in CLOSED state.
>
> Stefan Bader:
> s390: enable interrupts on error path
> s390: tape 3590 changes
>
> Stefan Rompf:
> Input: wistron - add signature for Amilo M7400
> [NET]: Add missing operstates documentation.
>
> Stefano Brivio:
> bcm43xx: check for valid MAC address in SPROM
>
> Stephen Hemminger:
> [PKT_SCHED] netem: fix loss
> [BRIDGE]: keep track of received multicast packets
> [CLASS DEVICE]: add attribute_group creation
> [NET]: Create netdev attribute_groups with class_device_add
> sky2: backout NAPI reschedule
> sky2: status irq hang fix
> sky2: tx ring index mask fix
> sky2: use mask instead of modulo operation
> sky2: edge triggered workaround enhancement
> sky2: dont write status ring
> sky2: synchronize irq on remove
> Add more support for the Yukon Ultra chip found in dual core centino laptops.
> sky2: version 1.3
> [NET]: Do sysfs registration as part of register_netdevice.
> [BRIDGE]: Do sysfs registration inside rtnl.
> sky2: ifdown kills irq mask
>
> Stephen Smalley:
> selinux: Clear selinux_enabled flag upon runtime disable.
>
> Steve Grubb:
> sockaddr patch
> audit inode patch
> change lspp ipc auditing
> Reworked patch for labels on user space messages
> More user space subject labels
> Rework of IPC auditing
> Audit Filter Performance
>
> Steven Finney:
> [ALSA] Handle the error correctly in SNDCTL_DSP_SETFMT ioctl
>
> Takashi Iwai:
> [ALSA] hda-codec - Use model 'hp' for all HP laptops with AD1981HD
> [ALSA] hda-codec - Add entry for Epox EP-5LDA+ GLi
> [ALSA] Fix double free in error path of miro driver
> [ALSA] intel8x0 - Disable ALI5455 SPDIF-input
> [ALSA] hda-codec - Add model entry for ASUS M9 laptop
> [ALSA] hda-codec - Add codec id for AD1988B codec chip
> [ALSA] Fix Oops at rmmod with CONFIG_SND_VERBOSE_PROCFS=n
> [ALSA] hda-codec - Fix capture from line-in on VAIO SZ/FE laptops
> [ALSA] hda-codec - Add model entry for ASUS Z62F
> [ALSA] via82xx - Use DXS_SRC as default for VIA8235/8237/8251 chips
>
> Tony Luck:
> [IA64] wire up compat_sys_adjtimex()
>
> Trond Myklebust:
> fs/locks.c: Fix lease_init
>
> Uwe Zeisberger:
> [ARM] 3488/1: make icedcc_putc do the right thing
> [ARM] 3496/1: more constants for asm-offsets.h
>
> Victor V. Vengerov:
> uml: fix iomem list traversal
>
> Vitaly Bordug:
> ppc32: odd fixes and improvements in ppc_sys
> ppc32 CPM_UART: Convert to use platform devices
> ppc32: Update board-specific code of the CPM UART users
> ppc32 CPM_UART: Fixed odd address translations
> ppc32 CPM_UART: Fixed break send on SCC
> ppc32 CPM_UART: fixes and improvements
>
> Vladislav Yasevich:
> [SCTP]: Prevent possible infinite recursion with multiple bundled DATA.
>
> Wang Jun:
> USB: add new iTegno usb CDMA 1x card support for pl2303
>
> Wei Yongjun:
> [IPV4]: ip_options_fragment() has no effect on fragmentation
>
> YOSHIFUJI Hideaki:
> [IPV6]: Fix race in route selection.
>
> Zach Brown:
> [SCSI] qla2xxx: only free_irq() after request_irq() succeeds
>
> Zachary Amsden:
> x86/PAE: Fix pte_clear for the >4GB RAM case
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Against latest git, don't know who to CC as maintainer :)
If my assumption was correct:
Signed-off-by: Avuton Olrich <[email protected]>
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 8dfa305..5a01297 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -466,8 +466,8 @@ config HIGHMEM64G
endchoice
choice
- depends on EXPERIMENTAL && !X86_PAE
- prompt "Memory split" if EMBEDDED
+ depends on EXPERIMENTAL && !X86_PAE && !EMBEDDED
+ prompt "Memory split"
default VMSPLIT_3G
help
Select the desired split between kernel and user memory.
--
avuton
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
On Wednesday 17 May 2006 18:33, Avuton Olrich wrote:
> Against latest git, don't know who to CC as maintainer :)
> If my assumption was correct:
>
> Signed-off-by: Avuton Olrich <[email protected]>
>
> diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
> index 8dfa305..5a01297 100644
> --- a/arch/i386/Kconfig
> +++ b/arch/i386/Kconfig
> @@ -466,8 +466,8 @@ config HIGHMEM64G
> endchoice
>
> choice
> - depends on EXPERIMENTAL && !X86_PAE
> - prompt "Memory split" if EMBEDDED
> + depends on EXPERIMENTAL && !X86_PAE && !EMBEDDED
> + prompt "Memory split"
> default VMSPLIT_3G
> help
> Select the desired split between kernel and user memory.
See:
http://marc.theaimsgroup.com/?l=linux-kernel&m=114741988422813&w=2
--
-ck
On Monday 15 May 2006 06:27, Alistair John Strachan wrote:
> On Sunday 14 May 2006 08:57, Ayaz Abdulla wrote:
> > Alistair John Strachan wrote:
>
> [snip]
>
> > > There's been just a single commit since -rc3:
> > >
> > > forcedeth: fix multi irq issues
> > > ebf34c9b6fcd22338ef764b039b3ac55ed0e297b
> > >
> > > However, it could have just been hidden since before -rc3, so I'll try
> > > to work backwards if nobody has any immediate ideas..
> >
> > The interrupt handler could be called during the same time (on different
> > cpu) the dev->stop function is clearing out the rings (nv_txrx_reset).
>
> FWIW, I can't reproduce the fault with the commitdiff
> ebf34c9b6fcd22338ef764b039b3ac55ed0e297b reverted.
Manfred located the fault and Andrew's holding a fix for it in -mm. Hopefully
it'll end up in mainline before 2.6.17.
--
Cheers,
Alistair.
Third year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.