2006-08-22 06:44:15

by Jesse Huang

[permalink] [raw]
Subject: [PATCH 4/4] IP100A: Solve host error problem in low performance embedded system when continune down and up.

From: Jesse Huang <[email protected]>

Change Logs:
- Solve host error problem in low performance embedded
system when continune down and up.

Signed-off-by: Jesse Huang <[email protected]>

---

sundance.c | 30 +++++++++++++++++++++++++-----
1 files changed, 25 insertions(+), 5 deletions(-)

a88c635933a981dd4fca87e5b8ca9426c5c98013
diff --git a/sundance.c b/sundance.c
index 424aebd..de55e0f 100755
--- a/sundance.c
+++ b/sundance.c
@@ -831,7 +831,7 @@ #endif
if (np->pci_rev_id >= 0x14)
iowrite8(0x01, ioaddr + DebugCtrl1);
netif_start_queue(dev);
-
+
spin_lock_irqsave(&np->lock,flags);
reset_tx(dev);
spin_unlock_irqrestore(&np->lock,flags);
@@ -1076,7 +1076,7 @@ reset_tx (struct net_device *dev)
struct sk_buff *skb;
int i;
int irq = in_interrupt();
-
+
/* Reset tx logic, TxListPtr will be cleaned */
iowrite16 (TxDisable, ioaddr + MACCtrl1);
iowrite16 (TxReset | DMAReset | FIFOReset | NetworkReset,
@@ -1647,6 +1647,14 @@ static int netdev_close(struct net_devic
struct sk_buff *skb;
int i;

+ /* Wait and kill tasklet */
+ tasklet_kill(&np->rx_tasklet);
+ tasklet_kill(&np->tx_tasklet);
+ np->cur_tx = 0;
+ np->dirty_tx = 0;
+ np->cur_task = 0;
+ np->last_tx = 0;
+
netif_stop_queue(dev);

if (netif_msg_ifdown(np)) {
@@ -1667,9 +1675,20 @@ static int netdev_close(struct net_devic
/* Stop the chip's Tx and Rx processes. */
iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);

- /* Wait and kill tasklet */
- tasklet_kill(&np->rx_tasklet);
- tasklet_kill(&np->tx_tasklet);
+ for (i = 2000; i > 0; i--) {
+ if ((ioread32(ioaddr + DMACtrl) &0xC000) == 0)
+ break;
+ mdelay(1);
+ }
+
+ iowrite16(GlobalReset | DMAReset | FIFOReset |NetworkReset, ioaddr +ASICCtrl + 2);
+
+ for (i = 2000; i > 0; i--)
+ {
+ if ((ioread16(ioaddr + ASICCtrl +2) &ResetBusy) == 0)
+ break;
+ mdelay(1);
+ }

#ifdef __i386__
if (netif_msg_hw(np)) {
@@ -1707,6 +1726,7 @@ #endif /* __i386__ debugging only */
}
}
for (i = 0; i < TX_RING_SIZE; i++) {
+ np->tx_ring[i].next_desc = 0;
skb = np->tx_skbuff[i];
if (skb) {
pci_unmap_single(np->pci_dev,
--
1.3.GIT




2006-08-22 16:02:37

by Randy Dunlap

[permalink] [raw]
Subject: Re: [PATCH 4/4] IP100A: Solve host error problem in low performance embedded system when continune down and up.

On Tue, 22 Aug 2006 14:31:32 -0400 Jesse Huang wrote:

> From: Jesse Huang <[email protected]>
>
> Change Logs:
> - Solve host error problem in low performance embedded
> system when continune down and up.
>
> Signed-off-by: Jesse Huang <[email protected]>
>
> ---
>
> sundance.c | 30 +++++++++++++++++++++++++-----
> 1 files changed, 25 insertions(+), 5 deletions(-)

Full path/file names above and below, please.

> a88c635933a981dd4fca87e5b8ca9426c5c98013
> diff --git a/sundance.c b/sundance.c
> index 424aebd..de55e0f 100755
> --- a/sundance.c
> +++ b/sundance.c
> @@ -1647,6 +1647,14 @@ static int netdev_close(struct net_devic
> struct sk_buff *skb;
> int i;
>
> + /* Wait and kill tasklet */
> + tasklet_kill(&np->rx_tasklet);
> + tasklet_kill(&np->tx_tasklet);
> + np->cur_tx = 0;
> + np->dirty_tx = 0;

Use same indentation/whitespace as surrounding code.
(tabs, not spaces)

> + np->cur_task = 0;
> + np->last_tx = 0;
> +
> netif_stop_queue(dev);
>
> if (netif_msg_ifdown(np)) {
> @@ -1667,9 +1675,20 @@ static int netdev_close(struct net_devic
> /* Stop the chip's Tx and Rx processes. */
> iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
>
> - /* Wait and kill tasklet */
> - tasklet_kill(&np->rx_tasklet);
> - tasklet_kill(&np->tx_tasklet);
> + for (i = 2000; i > 0; i--) {
> + if ((ioread32(ioaddr + DMACtrl) &0xC000) == 0)
> + break;
> + mdelay(1);
> + }
> +
> + iowrite16(GlobalReset | DMAReset | FIFOReset |NetworkReset, ioaddr +ASICCtrl + 2);
> +
> + for (i = 2000; i > 0; i--)
> + {
> + if ((ioread16(ioaddr + ASICCtrl +2) &ResetBusy) == 0)
> + break;
> + mdelay(1);
> + }

Same comment about indentation/whitespace.

---
~Randy

2006-08-24 01:56:12

by Jesse Huang

[permalink] [raw]
Subject: Re: [PATCH 4/4] IP100A: Solve host error problem in low performance embedded system when continune down and up.

Hi Randy:

Sorry for the file path. I will regenerate with path
a/drivers/net/sundance.c
and re-submit again.

Thanks for your help!

Best Regards,
Jesse Huang

----- Original Message -----
From: "Randy.Dunlap" <[email protected]>
To: "Jesse Huang" <[email protected]>
Cc: <[email protected]>; <[email protected]>;
<[email protected]>; <[email protected]>
Sent: Wednesday, August 23, 2006 12:05 AM
Subject: Re: [PATCH 4/4] IP100A: Solve host error problem in low performance
embedded system when continune down and up.


On Tue, 22 Aug 2006 14:31:32 -0400 Jesse Huang wrote:

> From: Jesse Huang <[email protected]>
>
> Change Logs:
> - Solve host error problem in low performance embedded
> system when continune down and up.
>
> Signed-off-by: Jesse Huang <[email protected]>
>
> ---
>
> sundance.c | 30 +++++++++++++++++++++++++-----
> 1 files changed, 25 insertions(+), 5 deletions(-)

Full path/file names above and below, please.

> a88c635933a981dd4fca87e5b8ca9426c5c98013
> diff --git a/sundance.c b/sundance.c
> index 424aebd..de55e0f 100755
> --- a/sundance.c
> +++ b/sundance.c
> @@ -1647,6 +1647,14 @@ static int netdev_close(struct net_devic
> struct sk_buff *skb;
> int i;
>
> + /* Wait and kill tasklet */
> + tasklet_kill(&np->rx_tasklet);
> + tasklet_kill(&np->tx_tasklet);
> + np->cur_tx = 0;
> + np->dirty_tx = 0;

Use same indentation/whitespace as surrounding code.
(tabs, not spaces)

> + np->cur_task = 0;
> + np->last_tx = 0;
> +
> netif_stop_queue(dev);
>
> if (netif_msg_ifdown(np)) {
> @@ -1667,9 +1675,20 @@ static int netdev_close(struct net_devic
> /* Stop the chip's Tx and Rx processes. */
> iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
>
> - /* Wait and kill tasklet */
> - tasklet_kill(&np->rx_tasklet);
> - tasklet_kill(&np->tx_tasklet);
> + for (i = 2000; i > 0; i--) {
> + if ((ioread32(ioaddr + DMACtrl) &0xC000) == 0)
> + break;
> + mdelay(1);
> + }
> +
> + iowrite16(GlobalReset | DMAReset | FIFOReset |NetworkReset, ioaddr
+ASICCtrl + 2);
> +
> + for (i = 2000; i > 0; i--)
> + {
> + if ((ioread16(ioaddr + ASICCtrl +2) &ResetBusy) == 0)
> + break;
> + mdelay(1);
> + }

Same comment about indentation/whitespace.

---
~Randy