Add support for the generic backlight interface below
/sys/class/backlight. The patch keeps the procfs brightness handling for
backward compatibility.
Signed-off-by: Holger Macht <[email protected]>
---
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 19b0d22..f0bd84a 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -172,6 +172,7 @@ config ACPI_NUMA
config ACPI_ASUS
tristate "ASUS/Medion Laptop Extras"
depends on X86
+ select BACKLIGHT_DEVICE
---help---
This driver provides support for extra features of ACPI-compatible
ASUS laptops. As some of Medion laptops are made by ASUS, it may also
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
index e9ee4c5..041760d 100644
--- a/drivers/acpi/asus_acpi.c
+++ b/drivers/acpi/asus_acpi.c
@@ -35,6 +35,7 @@ #include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <linux/backlight.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
@@ -390,6 +391,8 @@ static struct model_data model_conf[END_
/* procdir we use */
static struct proc_dir_entry *asus_proc_dir;
+static struct backlight_device *asus_backlight_device;
+
/*
* This header is made available to allow proper configuration given model,
* revision number , ... this info cannot go in struct asus_hotk because it is
@@ -769,7 +772,7 @@ proc_write_lcd(struct file *file, const
return count;
}
-static int read_brightness(void)
+static int read_brightness(struct backlight_device *bd)
{
int value;
@@ -791,9 +794,10 @@ static int read_brightness(void)
/*
* Change the brightness level
*/
-static void set_brightness(int value)
+static int set_brightness(int value)
{
acpi_status status = 0;
+ int ret = 0;
/* SPLV laptop */
if (hotk->methods->brightness_set) {
@@ -801,11 +805,12 @@ static void set_brightness(int value)
value, NULL))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
- return;
+ ret = -EIO;
+ goto out;
}
/* No SPLV method if we are here, act as appropriate */
- value -= read_brightness();
+ value -= read_brightness(NULL);
while (value != 0) {
status = acpi_evaluate_object(NULL, (value > 0) ?
hotk->methods->brightness_up :
@@ -815,15 +820,22 @@ static void set_brightness(int value)
if (ACPI_FAILURE(status))
printk(KERN_WARNING
"Asus ACPI: Error changing brightness\n");
+ ret = -EIO;
}
- return;
+out:
+ return ret;
+}
+
+static int set_brightness_status(struct backlight_device *bd)
+{
+ return set_brightness(bd->props->brightness);
}
static int
proc_read_brn(char *page, char **start, off_t off, int count, int *eof,
void *data)
{
- return sprintf(page, "%d\n", read_brightness());
+ return sprintf(page, "%d\n", read_brightness(NULL));
}
static int
@@ -1326,6 +1338,26 @@ static int asus_hotk_remove(struct acpi_
return 0;
}
+static struct backlight_properties asus_backlight_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = read_brightness,
+ .update_status = set_brightness_status,
+ .max_brightness = 15,
+};
+
+static void __exit asus_acpi_exit(void)
+{
+ if (asus_backlight_device)
+ backlight_device_unregister(asus_backlight_device);
+
+ acpi_bus_unregister_driver(&asus_hotk_driver);
+ remove_proc_entry(PROC_ASUS, acpi_root_dir);
+
+ kfree(asus_info);
+
+ return;
+}
+
static int __init asus_acpi_init(void)
{
int result;
@@ -1363,17 +1395,15 @@ static int __init asus_acpi_init(void)
return result;
}
- return 0;
-}
-
-static void __exit asus_acpi_exit(void)
-{
- acpi_bus_unregister_driver(&asus_hotk_driver);
- remove_proc_entry(PROC_ASUS, acpi_root_dir);
-
- kfree(asus_info);
+ asus_backlight_device = backlight_device_register("asus", NULL,
+ &asus_backlight_data);
+ if (IS_ERR(asus_backlight_device)) {
+ printk(KERN_ERR "Could not register asus backlight device\n");
+ asus_backlight_device = NULL;
+ asus_acpi_exit();
+ }
- return;
+ return 0;
}
module_init(asus_acpi_init);