I have problem with suspend to ram, and my SATA drive. When I try:
echo mem > /sys/power/state
system goes standby, but when doing the resume it
would come back and have I/O errors similar like this ((copied from
paper notes, the disk is no longer writable when the error happens)
kernel: journal commit I/O error
end_request: I/O error, dev sda, sector xxxxxxxx
sd 0:0:0:0: SCSI error return code: 0xxxxxx
Problem is similar like this:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111409309804068&w=2
http://www.thinkwiki.org/wiki/Problems_with_SATA_and_Linux
http://lkml.org/lkml/2005/9/23/97
I test it in 2.6.18.1 (with initrd) and 2.6.18 (with and without initrd).
Hardware: HP/Compaq nx6310
--
Maciej Rutecki <[email protected]>
http://www.unixy.pl
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/wiki/)
On Thursday, 2 November 2006 22:22, Maciej Rutecki wrote:
> I have problem with suspend to ram, and my SATA drive. When I try:
>
> echo mem > /sys/power/state
>
> system goes standby, but when doing the resume it
> would come back and have I/O errors similar like this ((copied from
> paper notes, the disk is no longer writable when the error happens)
>
> kernel: journal commit I/O error
> end_request: I/O error, dev sda, sector xxxxxxxx
> sd 0:0:0:0: SCSI error return code: 0xxxxxx
>
> Problem is similar like this:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=111409309804068&w=2
> http://www.thinkwiki.org/wiki/Problems_with_SATA_and_Linux
> http://lkml.org/lkml/2005/9/23/97
>
> I test it in 2.6.18.1 (with initrd) and 2.6.18 (with and without initrd).
>
> Hardware: HP/Compaq nx6310
Can you please test 2.6.19-rc4 with CONFIG_DISABLE_CONSOLE_SUSPEND
unset?
Rafael
--
You never change things by fighting the existing reality.
R. Buckminster Fuller
On Thu, Nov 02, 2006 at 10:22:56PM +0100, Maciej Rutecki wrote:
> I have problem with suspend to ram, and my SATA drive. When I try:
>
> echo mem > /sys/power/state
>
> system goes standby, but when doing the resume it
> would come back and have I/O errors similar like this ((copied from
> paper notes, the disk is no longer writable when the error happens)
>
> kernel: journal commit I/O error
> end_request: I/O error, dev sda, sector xxxxxxxx
> sd 0:0:0:0: SCSI error return code: 0xxxxxx
>
> Problem is similar like this:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=111409309804068&w=2
> http://www.thinkwiki.org/wiki/Problems_with_SATA_and_Linux
> http://lkml.org/lkml/2005/9/23/97
>
> I test it in 2.6.18.1 (with initrd) and 2.6.18 (with and without initrd).
for 2.6.18 there is a patch which makes AHCI sata behave correctly on
suspend/resume. it was originally written by Forrest Zhao and is now
included in the 2.6.19-rcX tree
you can apply the libata patch that went into 2.6.18-mm1. it is to be found
in the broken-out dir of 2.6.18-mm1 and named
git-libata-all-2.6.18-mm1.patch
when applying it to 2.6.18.1 you will get three rejects because the patches
are already in 2.6.18.1. simply say 'n' -> 'n' on those three.
>
> Hardware: HP/Compaq nx6310
>
> --
> Maciej Rutecki <[email protected]>
> http://www.unixy.pl
> LTG - Linux Testers Group
> (http://www.stardust.webpages.pl/ltg/wiki/)
gruss
mlo
--
Dipl.-Ing. Martin Lorenz
They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety.
Benjamin Franklin
please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
ICQ UIN: 33588107
Rafael J. Wysocki napisaĆ(a):
>
> Can you please test 2.6.19-rc4 with CONFIG_DISABLE_CONSOLE_SUSPEND
> unset?
>
> Rafael
>
>
I don't have this option:
rutek:/usr/src/linux-2.6.19-rc4# cat .config | grep SUSPEND
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_SUSPEND_SMP=y
CONFIG_USB_SUSPEND=y
but suspend to ram seems to work (I did't see any problem). Thanks for
help :-)
--
Maciej Rutecki <[email protected]>
http://www.unixy.pl
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/wiki/)
On Friday, 3 November 2006 20:34, Maciej Rutecki wrote:
> Rafael J. Wysocki napisa?(a):
>
> >
> > Can you please test 2.6.19-rc4 with CONFIG_DISABLE_CONSOLE_SUSPEND
> > unset?
> >
> > Rafael
> >
> >
> I don't have this option:
>
> rutek:/usr/src/linux-2.6.19-rc4# cat .config | grep SUSPEND
> CONFIG_SOFTWARE_SUSPEND=y
> CONFIG_SUSPEND_SMP=y
> CONFIG_USB_SUSPEND=y
So it is not set which is OK.
> but suspend to ram seems to work (I did't see any problem). Thanks for
> help :-)
You're welcome. :-)
--
You never change things by fighting the existing reality.
R. Buckminster Fuller
Martin Lorenz napisa?(a):
>
> for 2.6.18 there is a patch which makes AHCI sata behave correctly on
> suspend/resume. it was originally written by Forrest Zhao and is now
> included in the 2.6.19-rcX tree
>
> you can apply the libata patch that went into 2.6.18-mm1. it is to be found
> in the broken-out dir of 2.6.18-mm1 and named
> git-libata-all-2.6.18-mm1.patch
>
> when applying it to 2.6.18.1 you will get three rejects because the patches
> are already in 2.6.18.1. simply say 'n' -> 'n' on those three.
>
A test this patch witch 2.6.18 and works great, thanks :-)
--
Maciej Rutecki <[email protected]>
http://www.unixy.pl
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/wiki/)