Hi,
On Saturday, 11 November 2006 02:50, Adrian Bunk wrote:
> This email lists some known regressions in 2.6.19-rc5 compared to 2.6.18
> that are not yet fixed in Linus' tree.
>
> If you find your name in the Cc header, you are either submitter of one
> of the bugs, maintainer of an affectected subsystem or driver, a patch
> of you caused a breakage or I'm considering you in any other way possibly
> involved with one or more of these issues.
>
> Due to the huge amount of recipients, please trim the Cc when answering.
>
>
> Subject : PCI MSI setting corrupted during resume
> References : http://bugzilla.kernel.org/show_bug.cgi?id=7479
> Submitter : Stephen Hemminger <[email protected]>
> Status : unknown
>
>
> Subject : x86_64 boot failure: irq 22: nobody cared (hda_intel MSI)
> References : http://lkml.org/lkml/2006/11/8/98
> Submitter : Olivier Nicolas <[email protected]>
> Status : unknown
>
>
> Subject : SMP kernel can not generate ISA irq properly
> References : http://lkml.org/lkml/2006/10/22/15
> http://lkml.org/lkml/2006/11/10/142
> Submitter : Komuro <[email protected]>
> Handled-By : Thomas Gleixner <[email protected]>
> Status : Thomas is investigating
>
>
> Subject : x86_64: Fix partial page check to ensure unusable memory
> is not being marked usable
> References : http://lkml.org/lkml/2006/11/9/239
> Submitter : Aaron Durbin <[email protected]>
> Caused-By : Mel Gorman <[email protected]>
> commit 5cb248abf5ab65ab543b2d5fc16c738b28031fc0
> Patch : http://lkml.org/lkml/2006/11/9/239
> Status : patch available
>
>
> Subject : x86_64: Bad page state in process 'swapper'
> References : http://lkml.org/lkml/2006/11/10/135
> http://lkml.org/lkml/2006/11/10/208
> Submitter : Andre Noll <[email protected]>
> Handled-By : Andi Kleen <[email protected]>
> Status : Andi is investigating
>
>
> Subject : x86_64: oprofile doesn't work
> References : http://lkml.org/lkml/2006/10/27/3
> Submitter : Prakash Punnoor <[email protected]>
> Status : unknown
>
>
> Subject : weird battery charge level reported
> ACPI Error method parse / execution failed
> References : http://bugzilla.kernel.org/show_bug.cgi?id=7466
> Submitter : Olivier Mondoloni <[email protected]>
> Status : unknown
>
>
> Subject : ThinkPad R50p: boot fail with (lapic && on_battery)
> References : http://lkml.org/lkml/2006/10/31/333
> Submitter : Ernst Herzberg <[email protected]>
> Handled-By : Len Brown <[email protected]>
> Status : problem is being debugged
>
>
> Subject : BUG: scheduling while atomic: events/0/0x00000001/4
> after resume
> References : http://lkml.org/lkml/2006/11/2/209
> Submitter : Paolo Ornati <[email protected]>
> Status : unknown
I couldn't find anything in the report that would indicate the problem occured
after a resume. Was it really the case?
> Subject : sata-via doesn't detect anymore disks attached to VIA vt6421
> References : http://bugzilla.kernel.org/show_bug.cgi?id=7255
> Submitter : Thierry Vignaud <[email protected]>
> Status : unknown
>
>
> Subject : libata must be initialized earlier
> References : http://ozlabs.org/pipermail/linuxppc-dev/2006-November/027945.html
> Submitter : Paul Mackerras <[email protected]>
> Handled-By : Brian King <[email protected]>
> Patch : http://marc.theaimsgroup.com/?l=linux-ide&m=116169938407596&w=2
> Status : patch available
>
>
> Subject : unable to rip cd
> References : http://lkml.org/lkml/2006/10/13/100
> http://lkml.org/lkml/2006/11/8/42
> Submitter : Alex Romosan <[email protected]>
> Handled-By : Jens Axboe <[email protected]>
> Status : Jens is investigating
Greetings,
Rafael
--
You never change things by fighting the existing reality.
R. Buckminster Fuller
On Sat, 11 Nov 2006 10:08:37 +0100
"Rafael J. Wysocki" <[email protected]> wrote:
> > Subject : BUG: scheduling while atomic: events/0/0x00000001/4
> > after resume
> > References : http://lkml.org/lkml/2006/11/2/209
> > Submitter : Paolo Ornati <[email protected]>
> > Status : unknown
>
> I couldn't find anything in the report that would indicate the problem occured
> after a resume. Was it really the case?
Ahh, I've written that in another email but I trimmed LKML from CC by
mistake ;)
Relevant portion of that mail follows... anyway it seems that "-rc5" is
_OK_ since I'm running it by 2 days and it survived 9 suspend/resume
cycles.
------------------------------------------------------------------
I've reproduced it (with rc4-g4b1c46a3), and I think it is
suspend/resume related sice the messages start flooding dmesg just
after a resume...
I'll see if it is reproducible just doing suspend/resume a couple of
times... and if so I'll try with -rc5.
dmesg (stripped at the end):
[ 0.000000] Linux version 2.6.19-rc4-g4b1c46a3 (paolo@tux) (gcc version 4.1.1 (Gentoo 4.1.1)) #17 PREEMPT Wed Nov 1 18:36:28 CET 2006
[ 0.000000] Command line: root=/dev/sda6 elevator=cfq video=radeonfb:1024x768@60
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
[ 0.000000] BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 130864) 1 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa850
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000517 MSFT 0x00000097) @ 0x000000001ff30000
[ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x06000517 MSFT 0x00000097) @ 0x000000001ff30200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x06000517 MSFT 0x00000097) @ 0x000000001ff30390
[ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x06000517 MSFT 0x00000097) @ 0x000000001ff40040
[ 0.000000] ACPI: DSDT (v001 A0058 A0058002 0x00000002 MSFT 0x0100000d) @ 0x0000000000000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 130864) 1 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 130864
[ 0.000000] On node 0 totalpages: 130767
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1183 pages reserved
[ 0.000000] DMA zone: 2760 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1733 pages used for memmap
[ 0.000000] DMA32 zone: 125035 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000
[ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
[ 0.000000] Built 1 zonelists. Total pages: 127795
[ 0.000000] Kernel command line: root=/dev/sda6 elevator=cfq video=radeonfb:1024x768@60
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 32.727602] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 32.727605] time.c: Detected 2202.943 MHz processor.
[ 32.730265] Console: colour VGA+ 80x25
[ 32.733073] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 32.733509] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 32.733646] Checking aperture...
[ 32.733705] CPU 0: aperture @ f8000000 size 64 MB
[ 32.740581] Memory: 507900k/523456k available (2708k kernel code, 14716k reserved, 1343k data, 200k init)
[ 32.800438] Calibrating delay using timer specific routine.. 4409.08 BogoMIPS (lpj=2204542)
[ 32.800591] Mount-cache hash table entries: 256
[ 32.800771] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 32.800833] CPU: L2 Cache: 512K (64 bytes/line)
[ 32.800913] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
[ 32.801063] ACPI: Core revision 20060707
[ 32.814145] Using local APIC timer interrupts.
[ 32.859518] result 12516743
[ 32.859573] Detected 12.516 MHz APIC timer.
[ 32.860328] testing NMI watchdog ... OK.
[ 32.870515] checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
[ 32.873517] Freeing initrd memory: 2000k freed
[ 32.875609] NET: Registered protocol family 16
[ 32.875754] ACPI: bus type pci registered
[ 32.875818] PCI: Using configuration type 1
[ 32.881215] ACPI: Interpreter enabled
[ 32.881276] ACPI: Using IOAPIC for interrupt routing
[ 32.882250] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.882315] PCI: Probing PCI hardware (bus 00)
[ 32.884489] PCI: enabled onboard AC97/MC97 devices
[ 32.884765] Boot video device is 0000:01:00.0
[ 32.884843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.896169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 32.896831] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 32.897488] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 14 15)
[ 32.898143] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
[ 32.898809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 32.899560] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 32.900312] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 32.901052] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 32.901700] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.901768] pnp: PnP ACPI init
[ 32.904855] pnp: PnP ACPI: found 13 devices
[ 32.905045] SCSI subsystem initialized
[ 32.905158] usbcore: registered new interface driver usbfs
[ 32.905247] usbcore: registered new interface driver hub
[ 32.905335] usbcore: registered new device driver usb
[ 32.905452] PCI: Using ACPI for IRQ routing
[ 32.905511] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.905592] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 32.905754] agpgart: Detected AGP bridge 0
[ 32.908913] agpgart: AGP aperture is 64M @ 0xf8000000
[ 32.908997] PCI-DMA: Disabling IOMMU.
[ 32.909754] PCI: Bridge: 0000:00:01.0
[ 32.909812] IO window: a000-afff
[ 32.909871] MEM window: fd100000-fd6fffff
[ 32.909931] PREFETCH window: d5000000-f4ffffff
[ 32.910006] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.910026] NET: Registered protocol family 2
[ 32.918232] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 32.918368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 32.918516] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 32.918624] TCP: Hash tables configured (established 16384 bind 8192)
[ 32.918684] TCP reno registered
[ 32.919334] io scheduler noop registered
[ 32.919440] io scheduler cfq registered (default)
[ 32.920310] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.920477] radeonfb: Found Intel x86 BIOS ROM Image
[ 32.920539] radeonfb: Retrieved PLL infos from BIOS
[ 32.920598] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=166.00 MHz
[ 32.920671] radeonfb: PLL min 20000 max 40000
[ 32.921735] radeonfb: Monitor 1 type CRT found
[ 32.921793] radeonfb: Monitor 2 type no found
[ 32.955438] Console: switching to colour frame buffer device 128x48
[ 32.975175] radeonfb (0000:01:00.0): ATI Radeon Yd
[ 32.975352] ACPI: Power Button (FF) [PWRF]
[ 32.975477] ACPI: Power Button (CM) [PWRB]
[ 32.975586] ACPI: Sleep Button (CM) [SLPB]
[ 32.977202] Real Time Clock Driver v1.12ac
[ 32.977313] Linux agpgart interface v0.101 (c) Dave Jones
[ 32.977457] [drm] Initialized drm 1.0.1 20051102
[ 32.978126] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 32.978294] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 32.978587] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.978834] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 32.979259] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 32.979511] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.979773] Floppy drive(s): fd0 is 1.44M
[ 32.994906] FDC 0 is a post-1991 82077
[ 32.996382] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 32.996766] loop: loaded (max 8 devices)
[ 32.996906] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 32.999471] skge 1.9 addr 0xfdc00000 irq 17 chip Yukon-Lite rev 9
[ 33.001981] skge eth0: addr 00:11:d8:1c:a0:7a
[ 33.004520] 8139too Fast Ethernet driver 0.9.28
[ 33.007047] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 33.010258] eth1: RealTek RTL8139 at 0xffffc20000004000, 00:e0:4c:f0:ab:b8, IRQ 19
[ 33.013135] eth1: Identified 8139 chip type 'RTL-8139C'
[ 33.013151] Linux video capture interface: v2.00
[ 33.016118] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 33.019236] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 33.022583] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 33.026030] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
[ 33.029676] VP_IDE: chipset revision 6
[ 33.033379] VP_IDE: not 100% native mode: will probe irqs later
[ 33.037248] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 33.041286] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 33.045502] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 33.049751] Probing IDE interface ide0...
[ 33.841448] hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[ 34.152000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 34.156490] Probing IDE interface ide1...
[ 34.948226] hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
[ 35.257686] ide1 at 0x170-0x177,0x376 on irq 15
[ 35.264947] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 35.269964] Uniform CD-ROM driver Revision: 3.20
[ 35.283252] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
[ 35.289395] libata version 2.00 loaded.
[ 35.289419] sata_via 0000:00:0f.0: version 2.0
[ 35.289430] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
[ 35.294798] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 35.300148] ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20
[ 35.305530] ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20
[ 35.310844] scsi0 : sata_via
[ 35.515983] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 35.673125] ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
[ 35.678757] ata1.00: ata1: dev 0 multi count 16
[ 35.686006] ata1.00: configured for UDMA/133
[ 35.691568] scsi1 : sata_via
[ 35.897218] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 35.913718] ATA: abnormal status 0x7F on port 0xE007
[ 35.919332] scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
[ 35.925134] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 35.930882] sda: Write Protect is off
[ 35.936662] sda: Mode Sense: 00 3a 00 00
[ 35.936675] SCSI device sda: drive cache: write back
[ 35.942505] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 35.948370] sda: Write Protect is off
[ 35.954136] sda: Mode Sense: 00 3a 00 00
[ 35.954148] SCSI device sda: drive cache: write back
[ 35.959889] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 36.027032] sd 0:0:0:0: Attached scsi disk sda
[ 36.032710] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.038359] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 36.044338] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 36.050131] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 36.055834] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfd900000
[ 36.061409] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.067109] usb usb1: configuration #1 chosen from 1 choice
[ 36.072686] hub 1-0:1.0: USB hub found
[ 36.078141] hub 1-0:1.0: 8 ports detected
[ 36.183732] USB Universal Host Controller Interface driver v3.0
[ 36.189136] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 36.194595] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 36.200026] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 36.205457] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000
[ 36.211000] usb usb2: configuration #1 chosen from 1 choice
[ 36.216430] hub 2-0:1.0: USB hub found
[ 36.221776] hub 2-0:1.0: 2 ports detected
[ 36.327443] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[ 36.332864] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 36.338237] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 36.343600] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400
[ 36.348985] usb usb3: configuration #1 chosen from 1 choice
[ 36.354262] hub 3-0:1.0: USB hub found
[ 36.359430] hub 3-0:1.0: 2 ports detected
[ 36.465147] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
[ 36.470440] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 36.475698] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 36.480965] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800
[ 36.486227] usb usb4: configuration #1 chosen from 1 choice
[ 36.491386] hub 4-0:1.0: USB hub found
[ 36.496528] hub 4-0:1.0: 2 ports detected
[ 36.601875] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
[ 36.607110] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 36.612333] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 36.617549] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c000
[ 36.622729] usb usb5: configuration #1 chosen from 1 choice
[ 36.627812] hub 5-0:1.0: USB hub found
[ 36.632845] hub 5-0:1.0: 2 ports detected
[ 37.161683] usbcore: registered new interface driver cdc_acm
[ 37.166690] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 37.171947] usbcore: registered new interface driver usblp
[ 37.177212] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 37.182561] Initializing USB Mass Storage driver...
[ 37.187966] usbcore: registered new interface driver usb-storage
[ 37.193343] USB Mass Storage support registered.
[ 37.198710] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 37.204404] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 37.209839] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 37.215222] mice: PS/2 mouse device common for all mice
[ 37.220524] i2c /dev entries driver
[ 37.226206] Advanced Linux Sound Architecture Driver Version 1.0.13 (Sun Oct 22 08:56:16 2006 UTC).
[ 37.231946] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[ 37.239539] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 37.251526] input: AT Translated Set 2 keyboard as /class/input/input0
[ 37.751566] codec_read: codec 0 is not valid [0xfe0000]
[ 37.764869] codec_read: codec 0 is not valid [0xfe0000]
[ 37.778121] codec_read: codec 0 is not valid [0xfe0000]
[ 37.791242] codec_read: codec 0 is not valid [0xfe0000]
[ 37.808500] ALSA device list:
[ 37.813631] #0: VIA 8237 with AD1980 at 0xec00, irq 22
[ 37.818899] oprofile: using NMI interrupt.
[ 37.824105] TCP cubic registered
[ 37.829169] NET: Registered protocol family 1
[ 37.834229] NET: Registered protocol family 17
[ 37.839196] NET: Registered protocol family 15
[ 37.844134] ACPI: (supports S0 S1 S3 S4 S5)
[ 37.961630] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
[ 38.050012] RAMDISK: ext2 filesystem found at block 0
[ 38.054928] RAMDISK: Loading 2000KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
[ 38.066647] VFS: Mounted root (ext2 filesystem).
[ 38.129633] kjournald starting. Commit interval 5 seconds
[ 38.134550] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.139493] VFS: Mounted root (ext3 filesystem) readonly.
[ 38.144469] Trying to move old root to /initrd ... /initrd does not exist. Ignored.
[ 38.149670] Unmounting old root
[ 38.154701] Trying to free ramdisk memory ... okay
[ 38.159878] Freeing unused kernel memory: 200k freed
[ 38.164962] Write protecting the kernel read-only data: 560k
[ 40.454619] warning: process `touch' used the removed sysctl system call
[ 40.890041] warning: process `sleep' used the removed sysctl system call
[ 40.999232] warning: process `sleep' used the removed sysctl system call
[ 41.104730] warning: process `sleep' used the removed sysctl system call
[ 41.873966] warning: process `sleep' used the removed sysctl system call
[ 43.453372] EXT3 FS on sda6, internal journal
[ 43.999154] kjournald starting. Commit interval 5 seconds
[ 43.999164] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 43.999323] EXT3 FS on sda8, internal journal
[ 43.999328] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.117933] Adding 1004016k swap on /dev/sda7. Priority:-1 extents:1 across:1004016k
[ 50.175883] skge eth0: enabling interface
[ 62.993341] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 62.993361] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 62.993436] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[ 63.288516] [drm] Setting GART location based on new memory map
[ 63.288604] [drm] Loading R200 Microcode
[ 63.288694] [drm] writeback test succeeded in 1 usecs
[ 79.495845] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 81.127324] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 81.170715] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 248 bytes per conntrack
[ 180.334016] Installing knfsd (copyright (C) 1996 [email protected]).
[ 306.826671] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 306.826693] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 306.826768] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[ 306.826780] [drm] Loading R200 Microcode
[ 340.827814] Stopping tasks: ==========================================================================================================================================|
[ 340.828658] Shrinking memory... -\|/-done (51711 pages freed)
[ 340.925349] Suspending console(s)
[ 341.809883] pnp: Device 00:0b disabled.
[ 341.810124] pnp: Device 00:0a disabled.
[ 341.810148] radeonfb (0000:01:00.0): suspending for event: 1...
[ 341.887207] skge eth0: disabling interface
[ 341.899219] pci_set_power_state(): 0000:00:00.0: state=3, current state=5
[ 341.912910] swsusp: Need to copy 63368 pages
[ 26.062737] APIC error on CPU0: 00(00)
[ 26.062827] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 26.146592] PM: Writing back config space on device 0000:00:0a.0 at offset f (was 1f170100, writing 1f17010a)
[ 26.146599] PM: Writing back config space on device 0000:00:0a.0 at offset c (was 0, writing fdb00000)
[ 26.146609] PM: Writing back config space on device 0000:00:0a.0 at offset 5 (was 1, writing c801)
[ 26.146614] PM: Writing back config space on device 0000:00:0a.0 at offset 4 (was 0, writing fdc00000)
[ 26.146619] PM: Writing back config space on device 0000:00:0a.0 at offset 3 (was 0, writing 4010)
[ 26.146626] PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2b00000, writing 2b00117)
[ 26.146658] skge eth0: enabling interface
[ 26.160202] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 26.171176] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 26.171218] usb usb2: root hub lost power or was reset
[ 26.182150] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[ 26.182188] usb usb3: root hub lost power or was reset
[ 26.193128] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
[ 26.193165] usb usb4: root hub lost power or was reset
[ 26.204106] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
[ 26.204143] usb usb5: root hub lost power or was reset
[ 26.215084] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 26.215109] usb usb1: root hub lost power or was reset
[ 26.215127] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.226082] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[ 26.226088] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 26.229463] radeonfb (0000:01:00.0): resuming from state: 1...
[ 26.247263] pnp: Failed to activate device 00:03.
[ 26.247391] pnp: Failed to activate device 00:04.
[ 26.248318] pnp: Device 00:0a activated.
[ 26.249004] pnp: Device 00:0b activated.
[ 27.134110] Restarting tasks... done
[ 27.565554] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 27.565593] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 27.565670] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[ 27.565682] [drm] Loading R200 Microcode
[ 28.443446] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 248 bytes per conntrack
[ 752.692523] Stopping tasks: ======================================================================================================================================|
[ 752.693363] Shrinking memory... -\|/-\done (58183 pages freed)
[ 756.669812] Suspending console(s)
[ 757.578446] pnp: Device 00:0b disabled.
[ 757.578702] pnp: Device 00:0a disabled.
[ 757.578727] radeonfb (0000:01:00.0): suspending for event: 1...
[ 757.655322] skge eth0: disabling interface
[ 757.695225] swsusp: Need to copy 58533 pages
[ 25.139916] APIC error on CPU0: 00(00)
[ 25.293551] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 25.377319] PM: Writing back config space on device 0000:00:0a.0 at offset f (was 1f170100, writing 1f17010a)
[ 25.377326] PM: Writing back config space on device 0000:00:0a.0 at offset c (was 0, writing fdb00000)
[ 25.377338] PM: Writing back config space on device 0000:00:0a.0 at offset 5 (was 1, writing c801)
[ 25.377343] PM: Writing back config space on device 0000:00:0a.0 at offset 4 (was 0, writing fdc00000)
[ 25.377348] PM: Writing back config space on device 0000:00:0a.0 at offset 3 (was 0, writing 4010)
[ 25.377353] PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2b00000, writing 2b00117)
[ 25.377384] skge eth0: enabling interface
[ 25.382084] BUG: scheduling while atomic: events/0/0x00000001/4
[ 25.382086]
[ 25.382087] Call Trace:
[ 25.382097] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 25.382102] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 25.382107] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 25.382110] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 25.382115] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 25.382119] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 25.382124] [<ffffffff80239269>] kthread+0xce/0x101
[ 25.382128] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 25.382132] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 25.382137] [<ffffffff8023919b>] kthread+0x0/0x101
[ 25.382140] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 25.382141]
[ 25.387073] BUG: scheduling while atomic: events/0/0x00000001/4
[ 25.387074]
[ 25.387075] Call Trace:
[ 25.387078] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 25.387081] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 25.387085] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 25.387088] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 25.387092] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 25.387096] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 25.387099] [<ffffffff80239269>] kthread+0xce/0x101
[ 25.387103] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 25.387106] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 25.387111] [<ffffffff8023919b>] kthread+0x0/0x101
[ 25.387114] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 25.387115]
[ 25.391072] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 25.392063] BUG: scheduling while atomic: events/0/0x00000001/4
[ 25.392065]
[ 25.392065] Call Trace:
[ 25.392068] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 25.392072] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 25.392075] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 25.392079] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 25.392082] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 25.392086] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 25.392090] [<ffffffff80239269>] kthread+0xce/0x101
[ 25.392093] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 25.392097] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 25.392101] [<ffffffff8023919b>] kthread+0x0/0x101
[ 25.392104] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 25.392106]
[ 25.402046] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 25.402095] usb usb2: root hub lost power or was reset
[ 25.413022] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[ 25.413067] usb usb3: root hub lost power or was reset
[ 25.423998] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
[ 25.424043] usb usb4: root hub lost power or was reset
[ 25.434977] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
[ 25.435020] usb usb5: root hub lost power or was reset
[ 25.445955] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 25.445987] usb usb1: root hub lost power or was reset
[ 25.446006] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 25.456957] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[ 25.456963] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 25.460339] radeonfb (0000:01:00.0): resuming from state: 1...
[ 25.478130] pnp: Failed to activate device 00:03.
[ 25.478258] pnp: Failed to activate device 00:04.
[ 25.479252] pnp: Device 00:0a activated.
[ 25.479961] pnp: Device 00:0b activated.
[ 26.365424] Restarting tasks... done
[ 26.441032] BUG: sleeping function called from invalid context at include/asm/semaphore.h:105
[ 26.441035] in_atomic():1, irqs_disabled():0
[ 26.441037]
[ 26.441038] Call Trace:
[ 26.441046] [<ffffffff8049ff6c>] thread_return+0x0/0xf9
[ 26.441054] [<ffffffff802226ae>] __might_sleep+0xb2/0xb4
[ 26.441058] [<ffffffff8022749a>] acquire_console_sem+0x66/0x90
[ 26.441064] [<ffffffff80358086>] console_callback+0xe/0xde
[ 26.441068] [<ffffffff80235fce>] run_workqueue+0xb6/0x126
[ 26.441072] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 26.441075] [<ffffffff802365ff>] worker_thread+0xe6/0x11b
[ 26.441079] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 26.441083] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 26.441088] [<ffffffff80239269>] kthread+0xce/0x101
[ 26.441112] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 26.441117] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 26.441121] [<ffffffff8023919b>] kthread+0x0/0x101
[ 26.441125] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 26.441126]
[ 26.441160] BUG: scheduling while atomic: events/0/0x00000001/4
[ 26.441162]
[ 26.441162] Call Trace:
[ 26.441166] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 26.441171] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 26.441174] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 26.441178] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 26.441181] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 26.441185] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 26.441189] [<ffffffff80239269>] kthread+0xce/0x101
[ 26.441193] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 26.441196] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 26.441201] [<ffffffff8023919b>] kthread+0x0/0x101
[ 26.441204] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 26.441206]
[ 27.289287] BUG: scheduling while atomic: events/0/0x00000001/4
[ 27.289292]
[ 27.289293] Call Trace:
[ 27.289305] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 27.289310] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 27.289315] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 27.289319] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 27.289324] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 27.289328] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 27.289333] [<ffffffff80239269>] kthread+0xce/0x101
[ 27.289337] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 27.289342] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 27.289346] [<ffffffff8023919b>] kthread+0x0/0x101
[ 27.289349] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 27.289351]
[ 27.427130] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 27.427152] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 27.427228] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[ 27.427240] [drm] Loading R200 Microcode
[ 29.285334] BUG: scheduling while atomic: events/0/0x00000001/4
[ 29.285339]
[ 29.285340] Call Trace:
[ 29.285352] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 29.285358] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 29.285363] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 29.285366] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 29.285372] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 29.285376] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 29.285380] [<ffffffff80239269>] kthread+0xce/0x101
[ 29.285384] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 29.285389] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 29.285394] [<ffffffff8023919b>] kthread+0x0/0x101
[ 29.285397] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 29.285399]
[ 31.281290] BUG: scheduling while atomic: events/0/0x00000001/4
[ 31.281295]
[ 31.281296] Call Trace:
[ 31.281309] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 31.281314] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 31.281319] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 31.281323] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 31.281329] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 31.281333] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 31.281338] [<ffffffff80239269>] kthread+0xce/0x101
[ 31.281342] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 31.281346] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 31.281351] [<ffffffff8023919b>] kthread+0x0/0x101
[ 31.281354] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 31.281356]
[ 32.949597] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 248 bytes per conntrack
[ 33.277294] BUG: scheduling while atomic: events/0/0x00000001/4
[ 33.277298]
[ 33.277299] Call Trace:
[ 33.277311] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 33.277317] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 33.277322] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 33.277325] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 33.277331] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 33.277335] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 33.277340] [<ffffffff80239269>] kthread+0xce/0x101
[ 33.277344] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 33.277348] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 33.277353] [<ffffffff8023919b>] kthread+0x0/0x101
[ 33.277357] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 33.277359]
[ 35.273273] BUG: scheduling while atomic: events/0/0x00000001/4
[ 35.273278]
[ 35.273279] Call Trace:
[ 35.273291] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
[ 35.273296] [<ffffffff802f34b6>] list_add+0xc/0xe
[ 35.273302] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 35.273305] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
[ 35.273311] [<ffffffff802233e2>] default_wake_function+0x0/0xf
[ 35.273315] [<ffffffff80236519>] worker_thread+0x0/0x11b
[ 35.273320] [<ffffffff80239269>] kthread+0xce/0x101
[ 35.273324] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
[ 35.273329] [<ffffffff8020a238>] child_rip+0xa/0x12
[ 35.273334] [<ffffffff8023919b>] kthread+0x0/0x101
[ 35.273337] [<ffffffff8020a22e>] child_rip+0x0/0x12
[ 35.273339]
[...]
------------------------------------------------------------------
--
Paolo Ornati
Linux 2.6.19-rc5 on x86_64
On Saturday, 11 November 2006 10:25, Paolo Ornati wrote:
> On Sat, 11 Nov 2006 10:08:37 +0100
> "Rafael J. Wysocki" <[email protected]> wrote:
>
> > > Subject : BUG: scheduling while atomic: events/0/0x00000001/4
> > > after resume
> > > References : http://lkml.org/lkml/2006/11/2/209
> > > Submitter : Paolo Ornati <[email protected]>
> > > Status : unknown
> >
> > I couldn't find anything in the report that would indicate the problem occured
> > after a resume. Was it really the case?
>
> Ahh, I've written that in another email but I trimmed LKML from CC by
> mistake ;)
>
>
> Relevant portion of that mail follows... anyway it seems that "-rc5" is
> _OK_ since I'm running it by 2 days and it survived 9 suspend/resume
> cycles.
Okay, please let us know if it survives the next several cycles.
OTOH, the problem may be hiding.
> ------------------------------------------------------------------
>
> I've reproduced it (with rc4-g4b1c46a3), and I think it is
> suspend/resume related sice the messages start flooding dmesg just
> after a resume...
>
> I'll see if it is reproducible just doing suspend/resume a couple of
> times... and if so I'll try with -rc5.
>
>
> dmesg (stripped at the end):
>
> [ 0.000000] Linux version 2.6.19-rc4-g4b1c46a3 (paolo@tux) (gcc version 4.1.1 (Gentoo 4.1.1)) #17 PREEMPT Wed Nov 1 18:36:28 CET 2006
> [ 0.000000] Command line: root=/dev/sda6 elevator=cfq video=radeonfb:1024x768@60
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
> [ 0.000000] BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
> [ 0.000000] Entering add_active_range(0, 256, 130864) 1 entries of 256 used
> [ 0.000000] end_pfn_map = 1048576
> [ 0.000000] DMI 2.3 present.
> [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa850
> [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000517 MSFT 0x00000097) @ 0x000000001ff30000
> [ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x06000517 MSFT 0x00000097) @ 0x000000001ff30200
> [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x06000517 MSFT 0x00000097) @ 0x000000001ff30390
> [ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x06000517 MSFT 0x00000097) @ 0x000000001ff40040
> [ 0.000000] ACPI: DSDT (v001 A0058 A0058002 0x00000002 MSFT 0x0100000d) @ 0x0000000000000000
> [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
> [ 0.000000] Entering add_active_range(0, 256, 130864) 1 entries of 256 used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] DMA32 4096 -> 1048576
> [ 0.000000] Normal 1048576 -> 1048576
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0 -> 159
> [ 0.000000] 0: 256 -> 130864
> [ 0.000000] On node 0 totalpages: 130767
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 1183 pages reserved
> [ 0.000000] DMA zone: 2760 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 1733 pages used for memmap
> [ 0.000000] DMA32 zone: 125035 pages, LIFO batch:31
> [ 0.000000] Normal zone: 0 pages used for memmap
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 (Bootup-CPU)
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Setting APIC routing to flat
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
> [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000
> [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
> [ 0.000000] Built 1 zonelists. Total pages: 127795
> [ 0.000000] Kernel command line: root=/dev/sda6 elevator=cfq video=radeonfb:1024x768@60
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
> [ 32.727602] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
> [ 32.727605] time.c: Detected 2202.943 MHz processor.
> [ 32.730265] Console: colour VGA+ 80x25
> [ 32.733073] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> [ 32.733509] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> [ 32.733646] Checking aperture...
> [ 32.733705] CPU 0: aperture @ f8000000 size 64 MB
> [ 32.740581] Memory: 507900k/523456k available (2708k kernel code, 14716k reserved, 1343k data, 200k init)
> [ 32.800438] Calibrating delay using timer specific routine.. 4409.08 BogoMIPS (lpj=2204542)
> [ 32.800591] Mount-cache hash table entries: 256
> [ 32.800771] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 32.800833] CPU: L2 Cache: 512K (64 bytes/line)
> [ 32.800913] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
> [ 32.801063] ACPI: Core revision 20060707
> [ 32.814145] Using local APIC timer interrupts.
> [ 32.859518] result 12516743
> [ 32.859573] Detected 12.516 MHz APIC timer.
> [ 32.860328] testing NMI watchdog ... OK.
> [ 32.870515] checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
> [ 32.873517] Freeing initrd memory: 2000k freed
> [ 32.875609] NET: Registered protocol family 16
> [ 32.875754] ACPI: bus type pci registered
> [ 32.875818] PCI: Using configuration type 1
> [ 32.881215] ACPI: Interpreter enabled
> [ 32.881276] ACPI: Using IOAPIC for interrupt routing
> [ 32.882250] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 32.882315] PCI: Probing PCI hardware (bus 00)
> [ 32.884489] PCI: enabled onboard AC97/MC97 devices
> [ 32.884765] Boot video device is 0000:01:00.0
> [ 32.884843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 32.896169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
> [ 32.896831] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
> [ 32.897488] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 14 15)
> [ 32.898143] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
> [ 32.898809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
> [ 32.899560] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
> [ 32.900312] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
> [ 32.901052] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
> [ 32.901700] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 32.901768] pnp: PnP ACPI init
> [ 32.904855] pnp: PnP ACPI: found 13 devices
> [ 32.905045] SCSI subsystem initialized
> [ 32.905158] usbcore: registered new interface driver usbfs
> [ 32.905247] usbcore: registered new interface driver hub
> [ 32.905335] usbcore: registered new device driver usb
> [ 32.905452] PCI: Using ACPI for IRQ routing
> [ 32.905511] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> [ 32.905592] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
> [ 32.905754] agpgart: Detected AGP bridge 0
> [ 32.908913] agpgart: AGP aperture is 64M @ 0xf8000000
> [ 32.908997] PCI-DMA: Disabling IOMMU.
> [ 32.909754] PCI: Bridge: 0000:00:01.0
> [ 32.909812] IO window: a000-afff
> [ 32.909871] MEM window: fd100000-fd6fffff
> [ 32.909931] PREFETCH window: d5000000-f4ffffff
> [ 32.910006] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 32.910026] NET: Registered protocol family 2
> [ 32.918232] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
> [ 32.918368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> [ 32.918516] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> [ 32.918624] TCP: Hash tables configured (established 16384 bind 8192)
> [ 32.918684] TCP reno registered
> [ 32.919334] io scheduler noop registered
> [ 32.919440] io scheduler cfq registered (default)
> [ 32.920310] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 32.920477] radeonfb: Found Intel x86 BIOS ROM Image
> [ 32.920539] radeonfb: Retrieved PLL infos from BIOS
> [ 32.920598] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=166.00 MHz
> [ 32.920671] radeonfb: PLL min 20000 max 40000
> [ 32.921735] radeonfb: Monitor 1 type CRT found
> [ 32.921793] radeonfb: Monitor 2 type no found
> [ 32.955438] Console: switching to colour frame buffer device 128x48
> [ 32.975175] radeonfb (0000:01:00.0): ATI Radeon Yd
> [ 32.975352] ACPI: Power Button (FF) [PWRF]
> [ 32.975477] ACPI: Power Button (CM) [PWRB]
> [ 32.975586] ACPI: Sleep Button (CM) [SLPB]
> [ 32.977202] Real Time Clock Driver v1.12ac
> [ 32.977313] Linux agpgart interface v0.101 (c) Dave Jones
> [ 32.977457] [drm] Initialized drm 1.0.1 20051102
> [ 32.978126] [drm] Initialized radeon 1.25.0 20060524 on minor 0
> [ 32.978294] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> [ 32.978587] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 32.978834] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 32.979259] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 32.979511] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 32.979773] Floppy drive(s): fd0 is 1.44M
> [ 32.994906] FDC 0 is a post-1991 82077
> [ 32.996382] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> [ 32.996766] loop: loaded (max 8 devices)
> [ 32.996906] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
> [ 32.999471] skge 1.9 addr 0xfdc00000 irq 17 chip Yukon-Lite rev 9
> [ 33.001981] skge eth0: addr 00:11:d8:1c:a0:7a
> [ 33.004520] 8139too Fast Ethernet driver 0.9.28
> [ 33.007047] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
> [ 33.010258] eth1: RealTek RTL8139 at 0xffffc20000004000, 00:e0:4c:f0:ab:b8, IRQ 19
> [ 33.013135] eth1: Identified 8139 chip type 'RTL-8139C'
> [ 33.013151] Linux video capture interface: v2.00
> [ 33.016118] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [ 33.019236] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> [ 33.022583] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
> [ 33.026030] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
> [ 33.029676] VP_IDE: chipset revision 6
> [ 33.033379] VP_IDE: not 100% native mode: will probe irqs later
> [ 33.037248] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
> [ 33.041286] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
> [ 33.045502] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
> [ 33.049751] Probing IDE interface ide0...
> [ 33.841448] hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
> [ 34.152000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 34.156490] Probing IDE interface ide1...
> [ 34.948226] hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
> [ 35.257686] ide1 at 0x170-0x177,0x376 on irq 15
> [ 35.264947] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
> [ 35.269964] Uniform CD-ROM driver Revision: 3.20
> [ 35.283252] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
> [ 35.289395] libata version 2.00 loaded.
> [ 35.289419] sata_via 0000:00:0f.0: version 2.0
> [ 35.289430] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
> [ 35.294798] sata_via 0000:00:0f.0: routed to hard irq line 10
> [ 35.300148] ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20
> [ 35.305530] ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20
> [ 35.310844] scsi0 : sata_via
> [ 35.515983] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 35.673125] ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
> [ 35.678757] ata1.00: ata1: dev 0 multi count 16
> [ 35.686006] ata1.00: configured for UDMA/133
> [ 35.691568] scsi1 : sata_via
> [ 35.897218] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> [ 35.913718] ATA: abnormal status 0x7F on port 0xE007
> [ 35.919332] scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
> [ 35.925134] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
> [ 35.930882] sda: Write Protect is off
> [ 35.936662] sda: Mode Sense: 00 3a 00 00
> [ 35.936675] SCSI device sda: drive cache: write back
> [ 35.942505] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
> [ 35.948370] sda: Write Protect is off
> [ 35.954136] sda: Mode Sense: 00 3a 00 00
> [ 35.954148] SCSI device sda: drive cache: write back
> [ 35.959889] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
> [ 36.027032] sd 0:0:0:0: Attached scsi disk sda
> [ 36.032710] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 36.038359] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
> [ 36.044338] ehci_hcd 0000:00:10.4: EHCI Host Controller
> [ 36.050131] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
> [ 36.055834] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfd900000
> [ 36.061409] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 36.067109] usb usb1: configuration #1 chosen from 1 choice
> [ 36.072686] hub 1-0:1.0: USB hub found
> [ 36.078141] hub 1-0:1.0: 8 ports detected
> [ 36.183732] USB Universal Host Controller Interface driver v3.0
> [ 36.189136] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
> [ 36.194595] uhci_hcd 0000:00:10.0: UHCI Host Controller
> [ 36.200026] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
> [ 36.205457] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b000
> [ 36.211000] usb usb2: configuration #1 chosen from 1 choice
> [ 36.216430] hub 2-0:1.0: USB hub found
> [ 36.221776] hub 2-0:1.0: 2 ports detected
> [ 36.327443] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
> [ 36.332864] uhci_hcd 0000:00:10.1: UHCI Host Controller
> [ 36.338237] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
> [ 36.343600] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b400
> [ 36.348985] usb usb3: configuration #1 chosen from 1 choice
> [ 36.354262] hub 3-0:1.0: USB hub found
> [ 36.359430] hub 3-0:1.0: 2 ports detected
> [ 36.465147] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
> [ 36.470440] uhci_hcd 0000:00:10.2: UHCI Host Controller
> [ 36.475698] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
> [ 36.480965] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800
> [ 36.486227] usb usb4: configuration #1 chosen from 1 choice
> [ 36.491386] hub 4-0:1.0: USB hub found
> [ 36.496528] hub 4-0:1.0: 2 ports detected
> [ 36.601875] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
> [ 36.607110] uhci_hcd 0000:00:10.3: UHCI Host Controller
> [ 36.612333] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
> [ 36.617549] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c000
> [ 36.622729] usb usb5: configuration #1 chosen from 1 choice
> [ 36.627812] hub 5-0:1.0: USB hub found
> [ 36.632845] hub 5-0:1.0: 2 ports detected
> [ 37.161683] usbcore: registered new interface driver cdc_acm
> [ 37.166690] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
> [ 37.171947] usbcore: registered new interface driver usblp
> [ 37.177212] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> [ 37.182561] Initializing USB Mass Storage driver...
> [ 37.187966] usbcore: registered new interface driver usb-storage
> [ 37.193343] USB Mass Storage support registered.
> [ 37.198710] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> [ 37.204404] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 37.209839] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 37.215222] mice: PS/2 mouse device common for all mice
> [ 37.220524] i2c /dev entries driver
> [ 37.226206] Advanced Linux Sound Architecture Driver Version 1.0.13 (Sun Oct 22 08:56:16 2006 UTC).
> [ 37.231946] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
> [ 37.239539] PCI: Setting latency timer of device 0000:00:11.5 to 64
> [ 37.251526] input: AT Translated Set 2 keyboard as /class/input/input0
> [ 37.751566] codec_read: codec 0 is not valid [0xfe0000]
> [ 37.764869] codec_read: codec 0 is not valid [0xfe0000]
> [ 37.778121] codec_read: codec 0 is not valid [0xfe0000]
> [ 37.791242] codec_read: codec 0 is not valid [0xfe0000]
> [ 37.808500] ALSA device list:
> [ 37.813631] #0: VIA 8237 with AD1980 at 0xec00, irq 22
> [ 37.818899] oprofile: using NMI interrupt.
> [ 37.824105] TCP cubic registered
> [ 37.829169] NET: Registered protocol family 1
> [ 37.834229] NET: Registered protocol family 17
> [ 37.839196] NET: Registered protocol family 15
> [ 37.844134] ACPI: (supports S0 S1 S3 S4 S5)
> [ 37.961630] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
> [ 38.050012] RAMDISK: ext2 filesystem found at block 0
> [ 38.054928] RAMDISK: Loading 2000KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
> [ 38.066647] VFS: Mounted root (ext2 filesystem).
> [ 38.129633] kjournald starting. Commit interval 5 seconds
> [ 38.134550] EXT3-fs: mounted filesystem with ordered data mode.
> [ 38.139493] VFS: Mounted root (ext3 filesystem) readonly.
> [ 38.144469] Trying to move old root to /initrd ... /initrd does not exist. Ignored.
> [ 38.149670] Unmounting old root
> [ 38.154701] Trying to free ramdisk memory ... okay
> [ 38.159878] Freeing unused kernel memory: 200k freed
> [ 38.164962] Write protecting the kernel read-only data: 560k
> [ 40.454619] warning: process `touch' used the removed sysctl system call
> [ 40.890041] warning: process `sleep' used the removed sysctl system call
> [ 40.999232] warning: process `sleep' used the removed sysctl system call
> [ 41.104730] warning: process `sleep' used the removed sysctl system call
> [ 41.873966] warning: process `sleep' used the removed sysctl system call
> [ 43.453372] EXT3 FS on sda6, internal journal
> [ 43.999154] kjournald starting. Commit interval 5 seconds
> [ 43.999164] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
> [ 43.999323] EXT3 FS on sda8, internal journal
> [ 43.999328] EXT3-fs: mounted filesystem with ordered data mode.
> [ 44.117933] Adding 1004016k swap on /dev/sda7. Priority:-1 extents:1 across:1004016k
> [ 50.175883] skge eth0: enabling interface
> [ 62.993341] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> [ 62.993361] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
> [ 62.993436] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
> [ 63.288516] [drm] Setting GART location based on new memory map
> [ 63.288604] [drm] Loading R200 Microcode
> [ 63.288694] [drm] writeback test succeeded in 1 usecs
> [ 79.495845] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
> [ 81.127324] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 81.170715] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 248 bytes per conntrack
> [ 180.334016] Installing knfsd (copyright (C) 1996 [email protected]).
> [ 306.826671] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> [ 306.826693] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
> [ 306.826768] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
> [ 306.826780] [drm] Loading R200 Microcode
> [ 340.827814] Stopping tasks: ==========================================================================================================================================|
> [ 340.828658] Shrinking memory... -\|/-done (51711 pages freed)
> [ 340.925349] Suspending console(s)
> [ 341.809883] pnp: Device 00:0b disabled.
> [ 341.810124] pnp: Device 00:0a disabled.
> [ 341.810148] radeonfb (0000:01:00.0): suspending for event: 1...
> [ 341.887207] skge eth0: disabling interface
> [ 341.899219] pci_set_power_state(): 0000:00:00.0: state=3, current state=5
> [ 341.912910] swsusp: Need to copy 63368 pages
> [ 26.062737] APIC error on CPU0: 00(00)
> [ 26.062827] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 26.146592] PM: Writing back config space on device 0000:00:0a.0 at offset f (was 1f170100, writing 1f17010a)
> [ 26.146599] PM: Writing back config space on device 0000:00:0a.0 at offset c (was 0, writing fdb00000)
> [ 26.146609] PM: Writing back config space on device 0000:00:0a.0 at offset 5 (was 1, writing c801)
> [ 26.146614] PM: Writing back config space on device 0000:00:0a.0 at offset 4 (was 0, writing fdc00000)
> [ 26.146619] PM: Writing back config space on device 0000:00:0a.0 at offset 3 (was 0, writing 4010)
> [ 26.146626] PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2b00000, writing 2b00117)
> [ 26.146658] skge eth0: enabling interface
> [ 26.160202] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
> [ 26.171176] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
> [ 26.171218] usb usb2: root hub lost power or was reset
> [ 26.182150] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
> [ 26.182188] usb usb3: root hub lost power or was reset
> [ 26.193128] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
> [ 26.193165] usb usb4: root hub lost power or was reset
> [ 26.204106] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
> [ 26.204143] usb usb5: root hub lost power or was reset
> [ 26.215084] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
> [ 26.215109] usb usb1: root hub lost power or was reset
> [ 26.215127] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 26.226082] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
> [ 26.226088] PCI: Setting latency timer of device 0000:00:11.5 to 64
> [ 26.229463] radeonfb (0000:01:00.0): resuming from state: 1...
> [ 26.247263] pnp: Failed to activate device 00:03.
> [ 26.247391] pnp: Failed to activate device 00:04.
> [ 26.248318] pnp: Device 00:0a activated.
> [ 26.249004] pnp: Device 00:0b activated.
> [ 27.134110] Restarting tasks... done
> [ 27.565554] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> [ 27.565593] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
> [ 27.565670] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
> [ 27.565682] [drm] Loading R200 Microcode
> [ 28.443446] ip_conntrack version 2.4 (2044 buckets, 16352 max) - 248 bytes per conntrack
> [ 752.692523] Stopping tasks: ======================================================================================================================================|
> [ 752.693363] Shrinking memory... -\|/-\done (58183 pages freed)
> [ 756.669812] Suspending console(s)
> [ 757.578446] pnp: Device 00:0b disabled.
> [ 757.578702] pnp: Device 00:0a disabled.
> [ 757.578727] radeonfb (0000:01:00.0): suspending for event: 1...
> [ 757.655322] skge eth0: disabling interface
> [ 757.695225] swsusp: Need to copy 58533 pages
> [ 25.139916] APIC error on CPU0: 00(00)
> [ 25.293551] PCI: Setting latency timer of device 0000:00:01.0 to 64
> [ 25.377319] PM: Writing back config space on device 0000:00:0a.0 at offset f (was 1f170100, writing 1f17010a)
> [ 25.377326] PM: Writing back config space on device 0000:00:0a.0 at offset c (was 0, writing fdb00000)
> [ 25.377338] PM: Writing back config space on device 0000:00:0a.0 at offset 5 (was 1, writing c801)
> [ 25.377343] PM: Writing back config space on device 0000:00:0a.0 at offset 4 (was 0, writing fdc00000)
> [ 25.377348] PM: Writing back config space on device 0000:00:0a.0 at offset 3 (was 0, writing 4010)
> [ 25.377353] PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was 2b00000, writing 2b00117)
> [ 25.377384] skge eth0: enabling interface
> [ 25.382084] BUG: scheduling while atomic: events/0/0x00000001/4
> [ 25.382086]
> [ 25.382087] Call Trace:
> [ 25.382097] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
> [ 25.382102] [<ffffffff802f34b6>] list_add+0xc/0xe
> [ 25.382107] [<ffffffff80236519>] worker_thread+0x0/0x11b
> [ 25.382110] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
> [ 25.382115] [<ffffffff802233e2>] default_wake_function+0x0/0xf
> [ 25.382119] [<ffffffff80236519>] worker_thread+0x0/0x11b
> [ 25.382124] [<ffffffff80239269>] kthread+0xce/0x101
> [ 25.382128] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
> [ 25.382132] [<ffffffff8020a238>] child_rip+0xa/0x12
> [ 25.382137] [<ffffffff8023919b>] kthread+0x0/0x101
> [ 25.382140] [<ffffffff8020a22e>] child_rip+0x0/0x12
Apparently, the kernel thinks that worker_thread() is running in the atomic
context, so there may be a problem with preempt_count(), for example.
Is preemption enabled in your kernel(s)?
Greetings,
Rafael
--
You never change things by fighting the existing reality.
R. Buckminster Fuller
On Sat, 11 Nov 2006 11:49:26 +0100
"Rafael J. Wysocki" <[email protected]> wrote:
> > > > Subject : BUG: scheduling while atomic: events/0/0x00000001/4
> > > > after resume
> > > > References : http://lkml.org/lkml/2006/11/2/209
> > > > Submitter : Paolo Ornati <[email protected]>
> > > > Status : unknown
> > >
> > > I couldn't find anything in the report that would indicate the problem occured
> > > after a resume. Was it really the case?
> >
> > Ahh, I've written that in another email but I trimmed LKML from CC by
> > mistake ;)
> >
> >
> > Relevant portion of that mail follows... anyway it seems that "-rc5" is
> > _OK_ since I'm running it by 2 days and it survived 9 suspend/resume
> > cycles.
>
> Okay, please let us know if it survives the next several cycles.
>
> OTOH, the problem may be hiding.
Ok, and if it survives againg and again I can do a partial bisection...
so that someone could guess the change that hides/fixes this and I can
revert it on top of "-rc5" to confirm.
>
> > ------------------------------------------------------------------
> >
> > I've reproduced it (with rc4-g4b1c46a3), and I think it is
> > suspend/resume related sice the messages start flooding dmesg just
> > after a resume...
> >
> > I'll see if it is reproducible just doing suspend/resume a couple of
> > times... and if so I'll try with -rc5.
> >
> >
> > dmesg (stripped at the end):
> >
> > [ 0.000000] Linux version 2.6.19-rc4-g4b1c46a3 (paolo@tux) (gcc version 4.1.1 (Gentoo 4.1.1)) #17 PREEMPT Wed Nov 1 18:36:28 CET 2006
[CUT]
> > [ 25.382084] BUG: scheduling while atomic: events/0/0x00000001/4
> > [ 25.382086]
> > [ 25.382087] Call Trace:
> > [ 25.382097] [<ffffffff8049fafb>] __sched_text_start+0x5b/0x4cc
> > [ 25.382102] [<ffffffff802f34b6>] list_add+0xc/0xe
> > [ 25.382107] [<ffffffff80236519>] worker_thread+0x0/0x11b
> > [ 25.382110] [<ffffffff802365ce>] worker_thread+0xb5/0x11b
> > [ 25.382115] [<ffffffff802233e2>] default_wake_function+0x0/0xf
> > [ 25.382119] [<ffffffff80236519>] worker_thread+0x0/0x11b
> > [ 25.382124] [<ffffffff80239269>] kthread+0xce/0x101
> > [ 25.382128] [<ffffffff802234b1>] schedule_tail+0x30/0xa2
> > [ 25.382132] [<ffffffff8020a238>] child_rip+0xa/0x12
> > [ 25.382137] [<ffffffff8023919b>] kthread+0x0/0x101
> > [ 25.382140] [<ffffffff8020a22e>] child_rip+0x0/0x12
>
> Apparently, the kernel thinks that worker_thread() is running in the atomic
> context, so there may be a problem with preempt_count(), for example.
>
> Is preemption enabled in your kernel(s)?
YES (see first line of dmesg) - full config attached
--
Paolo Ornati
Linux 2.6.19-rc5 on x86_64
On Sat, 11 Nov 2006 13:29:29 +0100
Paolo Ornati <[email protected]> wrote:
> > Okay, please let us know if it survives the next several cycles.
> >
> > OTOH, the problem may be hiding.
>
> Ok, and if it survives againg and again I can do a partial bisection...
"-rc5" is still alive: 6 days of uptime using suspend/resume many times
every day...
so if the problem is there it's hiding very well.
Now I'll slowly go back with older kernels and see what happens...
--
Paolo Ornati
Linux 2.6.19-rc5 on x86_64
On Tue, 14 Nov 2006 17:44:51 +0100
Paolo Ornati <[email protected]> wrote:
> > > Okay, please let us know if it survives the next several cycles.
> > >
> > > OTOH, the problem may be hiding.
> >
> > Ok, and if it survives againg and again I can do a partial bisection...
>
> "-rc5" is still alive: 6 days of uptime using suspend/resume many times
> every day...
>
> so if the problem is there it's hiding very well.
>
>
> Now I'll slowly go back with older kernels and see what happens...
SHORT CONCLUSION: it was just a kernel miscompilation (I usually do
"make oldconfig; make clean; make" so I don't know if I missed "make
clean" or if it was caused by ccache...).
The fact that it's a miscompilation is "proved" by 3 simple things:
1) I've only seen the problem with that particular version
2) slow bisection pointed that the ipotetic bug was fixed between
4b1c46a3..d1ed6a3e, but I don't see any change that matters (on x86_64).
3) I'm running a clean recompiled 2.6.19-rc4-g4b1c46a3, that doesn't
have any problem.
:D
--
Paolo Ornati
Linux 2.6.19-rc4-g4b1c46a3 on x86_64