Here's a merge with the latest from LANANA. Its been a while, so _please_ let
me know if anyone sees unwanted changes. A few whitespaces and formatting
changes included too.
Thanks,
Torben
--- linux-2.6.19-rc6/Documentation/devices.txt 2006-11-16 05:03:40.000000000 +0100
+++ linux-2.6.19-rc6new/Documentation/devices.txt 2006-11-29 10:43:41.000000000 +0100
@@ -3,7 +3,7 @@
Maintained by Torben Mathiasen <[email protected]>
- Last revised: 15 May 2006
+ Last revised: 27 October 2006
This list is the Linux Device List, the official registry of allocated
device numbers and /dev directory nodes for the Linux operating
@@ -122,7 +122,7 @@
devices are on major 128 and above and use the PTY
master multiplex (/dev/ptmx) to acquire a PTY on
demand.
-
+
2 block Floppy disks
0 = /dev/fd0 Controller 0, drive 0, autodetect
1 = /dev/fd1 Controller 0, drive 1, autodetect
@@ -257,7 +257,7 @@
129 = /dev/vcsa1 tty1 text/attribute contents
...
191 = /dev/vcsa63 tty63 text/attribute contents
-
+
NOTE: These devices permit both read and write access.
7 block Loopback devices
@@ -411,7 +411,7 @@
207 = /dev/video/em8300_sp EM8300 DVD decoder subpicture
208 = /dev/compaq/cpqphpc Compaq PCI Hot Plug Controller
209 = /dev/compaq/cpqrid Compaq Remote Insight Driver
- 210 = /dev/impi/bt IMPI coprocessor block transfer
+ 210 = /dev/impi/bt IMPI coprocessor block transfer
211 = /dev/impi/smic IMPI coprocessor stream interface
212 = /dev/watchdogs/0 First watchdog device
213 = /dev/watchdogs/1 Second watchdog device
@@ -582,7 +582,7 @@
This device is used on the ARM-based Acorn RiscPC.
Partitions are handled the same way as for IDE disks
- (see major number 3).
+ (see major number 3).
22 char Digiboard serial card
0 = /dev/ttyD0 First Digiboard port
@@ -591,7 +591,7 @@
22 block Second IDE hard disk/CD-ROM interface
0 = /dev/hdc Master: whole disk (or CD-ROM)
64 = /dev/hdd Slave: whole disk (or CD-ROM)
-
+
Partitions are handled the same way as for the first
interface (see major number 3).
@@ -801,7 +801,7 @@
34 block Fourth IDE hard disk/CD-ROM interface
0 = /dev/hdg Master: whole disk (or CD-ROM)
64 = /dev/hdh Slave: whole disk (or CD-ROM)
-
+
Partitions are handled the same way as for the first
interface (see major number 3).
@@ -939,7 +939,7 @@
16 = /dev/ftlb FTL on second Memory Technology Device
32 = /dev/ftlc FTL on third Memory Technology Device
...
- 240 = /dev/ftlp FTL on 16th Memory Technology Device
+ 240 = /dev/ftlp FTL on 16th Memory Technology Device
Partitions are handled in the same way as for IDE
disks (see major number 3) except that the partition
@@ -1695,7 +1695,7 @@
1 = /dev/ipnat NAT control device/log file
2 = /dev/ipstate State information log file
3 = /dev/ipauth Authentication control device/log file
- ...
+ ...
96 char Parallel port ATAPI tape devices
0 = /dev/pt0 First parallel port ATAPI tape
@@ -2427,7 +2427,7 @@
Partitions are handled in the same way as for IDE
disks (see major number 3) except that the limit on
- partitions is 31.
+ partitions is 31.
162 char Raw block device interface
0 = /dev/rawctl Raw I/O control device
@@ -2543,9 +2543,6 @@
64 = /dev/usb/rio500 Diamond Rio 500
65 = /dev/usb/usblcd USBLCD Interface ([email protected])
66 = /dev/usb/cpad0 Synaptics cPad (mouse/LCD)
- 67 = /dev/usb/adutux0 1st Ontrak ADU device
- ...
- 76 = /dev/usb/adutux10 10th Ontrak ADU device
96 = /dev/usb/hiddev0 1st USB HID device
...
111 = /dev/usb/hiddev15 16th USB HID device
@@ -2571,7 +2568,7 @@
0 = /dev/uba First USB block device
8 = /dev/ubb Second USB block device
16 = /dev/ubc Third USB block device
- ...
+ ...
181 char Conrad Electronic parallel port radio clocks
0 = /dev/pcfclock0 First Conrad radio clock
@@ -2657,7 +2654,7 @@
32 = /dev/mvideo/status2 Third device
...
...
- 240 = /dev/mvideo/status15 16th device
+ 240 = /dev/mvideo/status15 16th device
...
195 char Nvidia graphics devices
@@ -2795,6 +2792,9 @@
...
185 = /dev/ttyNX15 Hilscher netX serial port 15
186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
+ 187 = /dev/ttyUL0 Xilinx uartlite - port 0
+ ...
+ 190 = /dev/ttyUL3 Xilinx uartlite - port 3
205 char Low-density serial ports (alternate device)
0 = /dev/culu0 Callout device for ttyLU0
@@ -3008,9 +3008,9 @@
2 = /dev/3270/tub2 Second 3270 terminal
...
-229 char IBM iSeries virtual console
- 0 = /dev/iseries/vtty0 First console port
- 1 = /dev/iseries/vtty1 Second console port
+229 char IBM iSeries/pSeries virtual console
+ 0 = /dev/hvc0 First console port
+ 1 = /dev/hvc1 Second console port
...
230 char IBM iSeries virtual tape
@@ -3115,7 +3115,20 @@
257 char Phoenix Technologies Cryptographic Services Driver
0 = /dev/ptlsec Crypto Services Driver
-
+257 block SSFDC Flash Translation Layer filesystem
+ 0 = /dev/ssfdca First SSFDC layer
+ 8 = /dev/ssfdcb Second SSFDC layer
+ 16 = /dev/ssfdcc Third SSFDC layer
+ 24 = /dev/ssfdcd 4th SSFDC layer
+ 32 = /dev/ssfdce 5th SSFDC layer
+ 40 = /dev/ssfdcf 6th SSFDC layer
+ 48 = /dev/ssfdcg 7th SSFDC layer
+ 56 = /dev/ssfdch 8th SSFDC layer
+
+258 block ROM/Flash read-only translation layer
+ 0 = /dev/blockrom0 First ROM card's translation layer interface
+ 1 = /dev/blockrom0 Second ROM card's translation layer interface
+ ...
**** ADDITIONAL /dev DIRECTORY ENTRIES
Torben Mathiasen wrote:
> Here's a merge with the latest from LANANA. Its been a while, so _please_ let
> me know if anyone sees unwanted changes. A few whitespaces and formatting
> changes included too.
[]
> +258 block ROM/Flash read-only translation layer
> + 0 = /dev/blockrom0 First ROM card's translation layer interface
> + 1 = /dev/blockrom0 Second ROM card's translation layer interface
^^^
Shouldn't here be '1', ie, /dev/blockrom1 ?
/mjt
> > +258 block ROM/Flash read-only translation layer
> > + 0 = /dev/blockrom0 First ROM card's
> translation layer interface
> > + 1 = /dev/blockrom0 Second ROM card's
> translation layer interface
> ^^^
>
> Shouldn't here be '1', ie, /dev/blockrom1 ?
>
Good catch. I also just added another patch fixing spelling on
lanana.org.
I'll let this email circulate until tomorrow and then send another patch
if nothing else comes in.
Thanks,
Torben