* diva, sedlbauer: the 'ready' label is only used in certain configurations
* hfc_pci:
- cast 'arg' to proper size for testing and printing
- print out 'void __iomem *' variables with %p,
rather than using incorrect casts that throw warnings
Signed-off-by: Jeff Garzik <[email protected]>
diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
index 3dacfff..6eebeb4 100644
--- a/drivers/isdn/hisax/diva.c
+++ b/drivers/isdn/hisax/diva.c
@@ -1121,7 +1121,11 @@ #endif /* CONFIG_PCI */
bytecnt = 32;
}
}
+
+#ifdef __ISAPNP__
ready:
+#endif
+
printk(KERN_INFO
"Diva: %s card configured at %#lx IRQ %d\n",
(cs->subtyp == DIVA_PCI) ? "PCI" :
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 93f60b5..463b8ac 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -1211,7 +1211,7 @@ #endif
break;
case (HW_TESTLOOP | REQUEST):
spin_lock_irqsave(&cs->lock, flags);
- switch ((int) arg) {
+ switch ((long) arg) {
case (1):
Write_hfc(cs, HFCPCI_B1_SSL, 0x80); /* tx slot */
Write_hfc(cs, HFCPCI_B1_RSL, 0x80); /* rx slot */
@@ -1229,7 +1229,7 @@ #endif
default:
spin_unlock_irqrestore(&cs->lock, flags);
if (cs->debug & L1_DEB_WARN)
- debugl1(cs, "hfcpci_l1hw loop invalid %4x", (int) arg);
+ debugl1(cs, "hfcpci_l1hw loop invalid %4lx", (long) arg);
return;
}
cs->hw.hfcpci.trm |= 0x80; /* enable IOM-loop */
@@ -1709,9 +1709,9 @@ #ifdef CONFIG_PCI
pci_write_config_dword(cs->hw.hfcpci.dev, 0x80, (u_int) virt_to_bus(cs->hw.hfcpci.fifos));
cs->hw.hfcpci.pci_io = ioremap((ulong) cs->hw.hfcpci.pci_io, 256);
printk(KERN_INFO
- "HFC-PCI: defined at mem %#x fifo %#x(%#x) IRQ %d HZ %d\n",
- (u_int) cs->hw.hfcpci.pci_io,
- (u_int) cs->hw.hfcpci.fifos,
+ "HFC-PCI: defined at mem %p fifo %p(%#x) IRQ %d HZ %d\n",
+ cs->hw.hfcpci.pci_io,
+ cs->hw.hfcpci.fifos,
(u_int) virt_to_bus(cs->hw.hfcpci.fifos),
cs->irq, HZ);
spin_lock_irqsave(&cs->lock, flags);
diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 9522141..030d162 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -677,7 +677,11 @@ #else
return (0);
#endif /* CONFIG_PCI */
}
+
+#ifdef __ISAPNP__
ready:
+#endif
+
/* In case of the sedlbauer pcmcia card, this region is in use,
* reserved for us by the card manager. So we do not check it
* here, it would fail.
On Sun, Dec 03, 2006 at 08:42:03PM -0500, Jeff Garzik wrote:
>
> * diva, sedlbauer: the 'ready' label is only used in certain configurations
> * hfc_pci:
> - cast 'arg' to proper size for testing and printing
> - print out 'void __iomem *' variables with %p,
> rather than using incorrect casts that throw warnings
>
> Signed-off-by: Jeff Garzik <[email protected]>
>
Acked-by: Karsten keil <[email protected]>
> diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c
> index 3dacfff..6eebeb4 100644
> --- a/drivers/isdn/hisax/diva.c
> +++ b/drivers/isdn/hisax/diva.c
> @@ -1121,7 +1121,11 @@ #endif /* CONFIG_PCI */
> bytecnt = 32;
> }
> }
> +
> +#ifdef __ISAPNP__
> ready:
> +#endif
> +
> printk(KERN_INFO
> "Diva: %s card configured at %#lx IRQ %d\n",
> (cs->subtyp == DIVA_PCI) ? "PCI" :
> diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
> index 93f60b5..463b8ac 100644
> --- a/drivers/isdn/hisax/hfc_pci.c
> +++ b/drivers/isdn/hisax/hfc_pci.c
> @@ -1211,7 +1211,7 @@ #endif
> break;
> case (HW_TESTLOOP | REQUEST):
> spin_lock_irqsave(&cs->lock, flags);
> - switch ((int) arg) {
> + switch ((long) arg) {
> case (1):
> Write_hfc(cs, HFCPCI_B1_SSL, 0x80); /* tx slot */
> Write_hfc(cs, HFCPCI_B1_RSL, 0x80); /* rx slot */
> @@ -1229,7 +1229,7 @@ #endif
> default:
> spin_unlock_irqrestore(&cs->lock, flags);
> if (cs->debug & L1_DEB_WARN)
> - debugl1(cs, "hfcpci_l1hw loop invalid %4x", (int) arg);
> + debugl1(cs, "hfcpci_l1hw loop invalid %4lx", (long) arg);
> return;
> }
> cs->hw.hfcpci.trm |= 0x80; /* enable IOM-loop */
> @@ -1709,9 +1709,9 @@ #ifdef CONFIG_PCI
> pci_write_config_dword(cs->hw.hfcpci.dev, 0x80, (u_int) virt_to_bus(cs->hw.hfcpci.fifos));
> cs->hw.hfcpci.pci_io = ioremap((ulong) cs->hw.hfcpci.pci_io, 256);
> printk(KERN_INFO
> - "HFC-PCI: defined at mem %#x fifo %#x(%#x) IRQ %d HZ %d\n",
> - (u_int) cs->hw.hfcpci.pci_io,
> - (u_int) cs->hw.hfcpci.fifos,
> + "HFC-PCI: defined at mem %p fifo %p(%#x) IRQ %d HZ %d\n",
> + cs->hw.hfcpci.pci_io,
> + cs->hw.hfcpci.fifos,
> (u_int) virt_to_bus(cs->hw.hfcpci.fifos),
> cs->irq, HZ);
> spin_lock_irqsave(&cs->lock, flags);
> diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
> index 9522141..030d162 100644
> --- a/drivers/isdn/hisax/sedlbauer.c
> +++ b/drivers/isdn/hisax/sedlbauer.c
> @@ -677,7 +677,11 @@ #else
> return (0);
> #endif /* CONFIG_PCI */
> }
> +
> +#ifdef __ISAPNP__
> ready:
> +#endif
> +
> /* In case of the sedlbauer pcmcia card, this region is in use,
> * reserved for us by the card manager. So we do not check it
> * here, it would fail.
--
Karsten Keil
SuSE Labs
ISDN development