From: Divy Le Ray <[email protected]>
This patch implements the main source file for
the Chelsio T3 network adapter driver.
Signed-off-by: Divy Le Ray <[email protected]>
---
drivers/net/cxgb3/cxgb3_main.c | 2480 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 2480 insertions(+), 0 deletions(-)
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
new file mode 100755
index 0000000..b173df3
--- /dev/null
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -0,0 +1,2480 @@
+/*
+ * This file is part of the Chelsio T3 Ethernet driver for Linux.
+ *
+ * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this
+ * release for licensing terms and conditions.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/mii.h>
+#include <linux/sockios.h>
+#include <linux/workqueue.h>
+#include <linux/proc_fs.h>
+#include <linux/rtnetlink.h>
+#include <asm/uaccess.h>
+
+#include "common.h"
+#include "cxgb3_ioctl.h"
+#include "regs.h"
+#include "cxgb3_offload.h"
+#include "version.h"
+
+#include "cxgb3_ctl_defs.h"
+#include "t3_cpl.h"
+#include "firmware_exports.h"
+
+enum {
+ MAX_TXQ_ENTRIES = 16384,
+ MAX_CTRL_TXQ_ENTRIES = 1024,
+ MAX_RSPQ_ENTRIES = 16384,
+ MAX_RX_BUFFERS = 16384,
+ MAX_RX_JUMBO_BUFFERS = 16384,
+ MIN_TXQ_ENTRIES = 4,
+ MIN_CTRL_TXQ_ENTRIES = 4,
+ MIN_RSPQ_ENTRIES = 32,
+ MIN_FL_ENTRIES = 32
+};
+
+#define PORT_MASK ((1 << MAX_NPORTS) - 1)
+
+#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
+ NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
+
+#define EEPROM_MAGIC 0x38E2F10C
+
+#define to_net_dev(class) container_of(class, struct net_device, class_dev)
+
+#define CH_DEVICE(devid, ssid, idx) \
+ { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
+
+static struct pci_device_id cxgb3_pci_tbl[] = {
+ CH_DEVICE(0x20, 1, 0), /* PE9000 */
+ CH_DEVICE(0x21, 1, 1), /* T302E */
+ CH_DEVICE(0x22, 1, 2), /* T310E */
+ CH_DEVICE(0x23, 1, 3), /* T320X */
+ CH_DEVICE(0x24, 1, 1), /* T302X */
+ CH_DEVICE(0x25, 1, 3), /* T320E */
+ CH_DEVICE(0x26, 1, 2), /* T310X */
+ CH_DEVICE(0x30, 1, 2), /* T3B10 */
+ CH_DEVICE(0x31, 1, 3), /* T3B20 */
+ CH_DEVICE(0x32, 1, 1), /* T3B02 */
+ {0,}
+};
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR("Chelsio Communications");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, cxgb3_pci_tbl);
+
+static int dflt_msg_enable = DFLT_MSG_ENABLE;
+
+module_param(dflt_msg_enable, int, 0644);
+MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T3 default message enable bitmap");
+
+/*
+ * The driver uses the best interrupt scheme available on a platform in the
+ * order MSI-X, MSI, legacy pin interrupts. This parameter determines which
+ * of these schemes the driver may consider as follows:
+ *
+ * msi = 2: choose from among all three options
+ * msi = 1: only consider MSI and pin interrupts
+ * msi = 0: force pin interrupts
+ */
+static int msi = 2;
+
+module_param(msi, int, 0644);
+MODULE_PARM_DESC(msi, "whether to use MSI or MSI-X");
+
+/*
+ * The driver enables offload as a default.
+ * To disable it, use ofld_disable = 1.
+ */
+
+static int ofld_disable = 0;
+
+module_param(ofld_disable, int, 0644);
+MODULE_PARM_DESC(ofld_disable, "whether to enable offload at init time or not");
+
+/*
+ * We have work elements that we need to cancel when an interface is taken
+ * down. Normally the work elements would be executed by keventd but that
+ * can deadlock because of linkwatch. If our close method takes the rtnl
+ * lock and linkwatch is ahead of our work elements in keventd, linkwatch
+ * will block keventd as it needs the rtnl lock, and we'll deadlock waiting
+ * for our work to complete. Get our own work queue to solve this.
+ */
+static struct workqueue_struct *cxgb3_wq;
+
+/**
+ * link_report - show link status and link speed/duplex
+ * @p: the port whose settings are to be reported
+ *
+ * Shows the link status, speed, and duplex of a port.
+ */
+static void link_report(struct port_info *p)
+{
+ if (!netif_carrier_ok(p->dev))
+ printk(KERN_INFO "%s: link down\n", p->dev->name);
+ else {
+ const char *s = "10Mbps";
+
+ switch (p->link_config.speed) {
+ case SPEED_10000:
+ s = "10Gbps";
+ break;
+ case SPEED_1000:
+ s = "1000Mbps";
+ break;
+ case SPEED_100:
+ s = "100Mbps";
+ break;
+ }
+
+ printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
+ p->dev->name, s,
+ p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
+ }
+}
+
+/**
+ * t3_os_link_changed - handle link status changes
+ * @adapter: the adapter associated with the link change
+ * @port_id: the port index whose limk status has changed
+ * @link_stat: the new status of the link
+ * @speed: the new speed setting
+ * @duplex: the new duplex setting
+ * @pause: the new flow-control setting
+ *
+ * This is the OS-dependent handler for link status changes. The OS
+ * neutral handler takes care of most of the processing for these events,
+ * then calls this handler for any OS-specific processing.
+ */
+void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat,
+ int speed, int duplex, int pause)
+{
+ struct port_info *p = &adapter->port[port_id];
+
+ /* Skip changes from disabled ports. */
+ if (!netif_running(p->dev))
+ return;
+
+ if (link_stat != netif_carrier_ok(p->dev)) {
+ if (link_stat)
+ netif_carrier_on(p->dev);
+ else
+ netif_carrier_off(p->dev);
+ link_report(p);
+ }
+}
+
+static void cxgb_set_rxmode(struct net_device *dev)
+{
+ struct t3_rx_mode rm;
+ struct adapter *adapter = dev->priv;
+
+ init_rx_mode(&rm, dev, dev->mc_list);
+ t3_mac_set_rx_mode(&adapter->port[dev->if_port].mac, &rm);
+}
+
+/**
+ * link_start - enable a port
+ * @p: the port to enable
+ *
+ * Performs the MAC and PHY actions needed to enable a port.
+ */
+static void link_start(struct port_info *p)
+{
+ struct t3_rx_mode rm;
+ struct cmac *mac = &p->mac;
+ struct net_device *dev = p->dev;
+
+ init_rx_mode(&rm, dev, dev->mc_list);
+ t3_mac_reset(mac);
+ t3_mac_set_mtu(mac, dev->mtu);
+ t3_mac_set_address(mac, 0, dev->dev_addr);
+ t3_mac_set_rx_mode(mac, &rm);
+ t3_link_start(&p->phy, mac, &p->link_config);
+ t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+}
+
+static inline void cxgb_disable_msi(struct adapter *adapter)
+{
+ if (adapter->flags & USING_MSIX) {
+ pci_disable_msix(adapter->pdev);
+ adapter->flags &= ~USING_MSIX;
+ } else if (adapter->flags & USING_MSI) {
+ pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~USING_MSI;
+ }
+}
+
+/*
+ * Interrupt handler for asynchronous events used with MSI-X.
+ */
+static irqreturn_t t3_async_intr_handler(int irq, void *cookie)
+{
+ t3_slow_intr_handler(cookie);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Name the MSI-X interrupts.
+ */
+static void name_msix_vecs(struct adapter *adap)
+{
+ int i, n = sizeof(adap->msix_info[0].desc) - 1;
+ int nqs0 = adap->port[0].nqsets;
+
+ snprintf(adap->msix_info[0].desc, n, "%s", adap->name);
+ adap->msix_info[0].desc[n] = 0;
+
+ for (i = 1; i <= nqs0 + adap->port[1].nqsets; i++) {
+ int port_idx = (i > nqs0);
+ snprintf(adap->msix_info[i].desc, n, "%s (queue %d)",
+ adap->port[port_idx].dev->name,
+ i <= nqs0 ? i - 1 : i - 1 - nqs0);
+ adap->msix_info[i].desc[n] = 0;
+ }
+}
+
+static int request_msix_data_irqs(struct adapter *adap)
+{
+ int i, j, err, qidx = 0;
+
+ for_each_port(adap, i) {
+ int nqsets = adap->port[i].nqsets;
+
+ for (j = 0; j < nqsets; ++j) {
+ err = request_irq(adap->msix_info[qidx + 1].vec,
+ t3_intr_handler(adap,
+ adap->sge.qs[qidx].
+ rspq.polling), 0,
+ adap->msix_info[qidx + 1].desc,
+ &adap->sge.qs[qidx]);
+ if (err) {
+ while (--qidx >= 0)
+ free_irq(adap->msix_info[qidx + 1].vec,
+ &adap->sge.qs[qidx]);
+ return err;
+ }
+ qidx++;
+ }
+ }
+ return 0;
+}
+
+/**
+ * setup_rss - configure RSS
+ * @adap: the adapter
+ *
+ * Sets up RSS to distribute packets to multiple receive queues. We
+ * configure the RSS CPU lookup table to distribute to the number of HW
+ * receive queues, and the response queue lookup table to narrow that
+ * down to the response queues actually configured for each port.
+ * We always configure the RSS mapping for two ports since the mapping
+ * table has plenty of entries.
+ */
+static void setup_rss(struct adapter *adap)
+{
+ int i;
+ unsigned int nq0 = adap->port[0].nqsets;
+ unsigned int nq1 = max((unsigned int)adap->port[1].nqsets, 1U);
+ u8 cpus[SGE_QSETS + 1];
+ u16 rspq_map[RSS_TABLE_SIZE];
+
+ for (i = 0; i < SGE_QSETS; ++i)
+ cpus[i] = i;
+ cpus[SGE_QSETS] = 0xff; /* terminator */
+
+ for (i = 0; i < RSS_TABLE_SIZE / 2; ++i) {
+ rspq_map[i] = i % nq0;
+ rspq_map[i + RSS_TABLE_SIZE / 2] = (i % nq1) + nq0;
+ }
+
+ t3_config_rss(adap, F_RQFEEDBACKENABLE | F_TNLLKPEN | F_TNLMAPEN |
+ F_TNLPRTEN | F_TNL2TUPEN | F_TNL4TUPEN |
+ V_RRCPLCPUSIZE(6), cpus, rspq_map);
+}
+
+/*
+ * If we have multiple receive queues per port serviced by NAPI we need one
+ * netdevice per queue as NAPI operates on netdevices. We already have one
+ * netdevice, namely the one associated with the interface, so we use dummy
+ * ones for any additional queues. Note that these netdevices exist purely
+ * so that NAPI has something to work with, they do not represent network
+ * ports and are not registered.
+ */
+static int init_dummy_netdevs(struct adapter *adap)
+{
+ int i, j, dummy_idx = 0;
+ struct net_device *nd;
+
+ for_each_port(adap, i) {
+ const struct port_info *pi = &adap->port[i];
+
+ for (j = 0; j < pi->nqsets - 1; j++) {
+ if (!adap->dummy_netdev[dummy_idx]) {
+ nd = alloc_netdev(0, "", ether_setup);
+ if (!nd)
+ goto free_all;
+
+ nd->priv = adap;
+ nd->weight = 64;
+ set_bit(__LINK_STATE_START, &nd->state);
+ adap->dummy_netdev[dummy_idx] = nd;
+ }
+ strcpy(adap->dummy_netdev[dummy_idx]->name,
+ pi->dev->name);
+ dummy_idx++;
+ }
+ }
+ return 0;
+
+free_all:
+ while (--dummy_idx >= 0) {
+ free_netdev(adap->dummy_netdev[dummy_idx]);
+ adap->dummy_netdev[dummy_idx] = NULL;
+ }
+ return -ENOMEM;
+}
+
+/*
+ * Wait until all NAPI handlers are descheduled. This includes the handlers of
+ * both netdevices representing interfaces and the dummy ones for the extra
+ * queues.
+ */
+static void quiesce_rx(struct adapter *adap)
+{
+ int i;
+ struct net_device *dev;
+
+ for_each_port(adap, i) {
+ dev = adap->port[i].dev;
+ while (test_bit(__LINK_STATE_RX_SCHED, &dev->state))
+ msleep(1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(adap->dummy_netdev); i++) {
+ dev = adap->dummy_netdev[i];
+ if (dev)
+ while (test_bit(__LINK_STATE_RX_SCHED, &dev->state))
+ msleep(1);
+ }
+}
+
+/**
+ * setup_sge_qsets - configure SGE Tx/Rx/response queues
+ * @adap: the adapter
+ *
+ * Determines how many sets of SGE queues to use and initializes them.
+ * We support multiple queue sets per port if we have MSI-X, otherwise
+ * just one queue set per port.
+ */
+static int setup_sge_qsets(struct adapter *adap)
+{
+ int i, j, err, irq_idx = 0, qset_idx = 0, dummy_dev_idx = 0;
+ unsigned int ntxq = is_offload(adap) ? SGE_TXQ_PER_SET : 1;
+
+ if (adap->params.rev > 0 && !(adap->flags & USING_MSI))
+ irq_idx = -1;
+
+ for_each_port(adap, i) {
+ const struct port_info *pi = &adap->port[i];
+
+ for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
+ err = t3_sge_alloc_qset(adap, qset_idx, 1,
+ (adap->
+ flags & USING_MSIX) ? qset_idx
+ + 1 : irq_idx,
+ &adap->params.sge.
+ qset[qset_idx], ntxq,
+ j ==
+ 0 ? pi->dev : adap->
+ dummy_netdev[dummy_dev_idx++]);
+ if (err) {
+ t3_free_sge_resources(adap);
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static ssize_t attr_show(struct class_device *cd, char *buf,
+ ssize_t(*format) (struct adapter *, char *))
+{
+ ssize_t len;
+ struct adapter *adap = to_net_dev(cd)->priv;
+
+ /* Synchronize with ioctls that may shut down the device */
+ rtnl_lock();
+ len = (*format) (adap, buf);
+ rtnl_unlock();
+ return len;
+}
+
+static ssize_t attr_store(struct class_device *cd, const char *buf, size_t len,
+ ssize_t(*set) (struct adapter *, unsigned int),
+ unsigned int min_val, unsigned int max_val)
+{
+ char *endp;
+ ssize_t ret;
+ unsigned int val;
+ struct adapter *adap = to_net_dev(cd)->priv;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ val = simple_strtoul(buf, &endp, 0);
+ if (endp == buf || val < min_val || val > max_val)
+ return -EINVAL;
+
+ rtnl_lock();
+ ret = (*set) (adap, val);
+ if (!ret)
+ ret = len;
+ rtnl_unlock();
+ return ret;
+}
+
+#define CXGB3_SHOW(name, val_expr) \
+static ssize_t format_##name(struct adapter *adap, char *buf) \
+{ \
+ return sprintf(buf, "%u\n", val_expr); \
+} \
+static ssize_t show_##name(struct class_device *cd, char *buf) \
+{ \
+ return attr_show(cd, buf, format_##name); \
+}
+
+static ssize_t set_nfilters(struct adapter *adap, unsigned int val)
+{
+ if (adap->flags & FULL_INIT_DONE)
+ return -EBUSY;
+ if (val && adap->params.rev == 0)
+ return -EINVAL;
+ if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers)
+ return -EINVAL;
+ adap->params.mc5.nfilters = val;
+ return 0;
+}
+
+static ssize_t store_nfilters(struct class_device *cd, const char *buf,
+ size_t len)
+{
+ return attr_store(cd, buf, len, set_nfilters, 0, ~0);
+}
+
+static ssize_t set_nservers(struct adapter *adap, unsigned int val)
+{
+ if (adap->flags & FULL_INIT_DONE)
+ return -EBUSY;
+ if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nfilters)
+ return -EINVAL;
+ adap->params.mc5.nservers = val;
+ return 0;
+}
+
+static ssize_t store_nservers(struct class_device *cd, const char *buf,
+ size_t len)
+{
+ return attr_store(cd, buf, len, set_nservers, 0, ~0);
+}
+
+#define CXGB3_ATTR_R(name, val_expr) \
+CXGB3_SHOW(name, val_expr) \
+static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
+
+#define CXGB3_ATTR_RW(name, val_expr, store_method) \
+CXGB3_SHOW(name, val_expr) \
+static CLASS_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_method)
+
+CXGB3_ATTR_R(cam_size, t3_mc5_size(&adap->mc5));
+CXGB3_ATTR_RW(nfilters, adap->params.mc5.nfilters, store_nfilters);
+CXGB3_ATTR_RW(nservers, adap->params.mc5.nservers, store_nservers);
+
+static struct attribute *cxgb3_attrs[] = {
+ &class_device_attr_cam_size.attr,
+ &class_device_attr_nfilters.attr,
+ &class_device_attr_nservers.attr,
+ NULL
+};
+
+static struct attribute_group cxgb3_attr_group = {.attrs = cxgb3_attrs };
+
+static ssize_t tm_attr_show(struct class_device *cd, char *buf, int sched)
+{
+ ssize_t len;
+ unsigned int v, addr, bpt, cpt;
+ struct adapter *adap = to_net_dev(cd)->priv;
+
+ addr = A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2;
+ rtnl_lock();
+ t3_write_reg(adap, A_TP_TM_PIO_ADDR, addr);
+ v = t3_read_reg(adap, A_TP_TM_PIO_DATA);
+ if (sched & 1)
+ v >>= 16;
+ bpt = (v >> 8) & 0xff;
+ cpt = v & 0xff;
+ if (!cpt)
+ len = sprintf(buf, "disabled\n");
+ else {
+ v = (adap->params.vpd.cclk * 1000) / cpt;
+ len = sprintf(buf, "%u Kbps\n", (v * bpt) / 125);
+ }
+ rtnl_unlock();
+ return len;
+}
+
+static ssize_t tm_attr_store(struct class_device *cd, const char *buf,
+ size_t len, int sched)
+{
+ char *endp;
+ ssize_t ret;
+ unsigned int val;
+ struct adapter *adap = to_net_dev(cd)->priv;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ val = simple_strtoul(buf, &endp, 0);
+ if (endp == buf || val > 10000000)
+ return -EINVAL;
+
+ rtnl_lock();
+ ret = t3_config_sched(adap, val, sched);
+ if (!ret)
+ ret = len;
+ rtnl_unlock();
+ return ret;
+}
+
+#define TM_ATTR(name, sched) \
+static ssize_t show_##name(struct class_device *cd, char *buf) \
+{ \
+ return tm_attr_show(cd, buf, sched); \
+} \
+static ssize_t store_##name(struct class_device *cd, const char *buf, size_t len) \
+{ \
+ return tm_attr_store(cd, buf, len, sched); \
+} \
+static CLASS_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_##name)
+
+TM_ATTR(sched0, 0);
+TM_ATTR(sched1, 1);
+TM_ATTR(sched2, 2);
+TM_ATTR(sched3, 3);
+TM_ATTR(sched4, 4);
+TM_ATTR(sched5, 5);
+TM_ATTR(sched6, 6);
+TM_ATTR(sched7, 7);
+
+static struct attribute *offload_attrs[] = {
+ &class_device_attr_sched0.attr,
+ &class_device_attr_sched1.attr,
+ &class_device_attr_sched2.attr,
+ &class_device_attr_sched3.attr,
+ &class_device_attr_sched4.attr,
+ &class_device_attr_sched5.attr,
+ &class_device_attr_sched6.attr,
+ &class_device_attr_sched7.attr,
+ NULL
+};
+
+static struct attribute_group offload_attr_group = {.attrs = offload_attrs };
+
+/*
+ * Sends an sk_buff to an offload queue driver
+ * after dealing with any active network taps.
+ */
+static inline int offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
+{
+ int ret;
+
+ local_bh_disable();
+ ret = t3_offload_tx(tdev, skb);
+ local_bh_enable();
+ return ret;
+}
+
+static int write_smt_entry(struct adapter *adapter, int idx)
+{
+ struct net_device *dev = adapter->port[idx].dev;
+ struct cpl_smt_write_req *req;
+ struct sk_buff *skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+
+ if (!skb)
+ return -ENOMEM;
+
+ req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req));
+ req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, idx));
+ req->mtu_idx = NMTUS - 1; /* should be 0 but there's a T3 bug */
+ req->iff = idx;
+ memset(req->src_mac1, 0, sizeof(req->src_mac1));
+ memcpy(req->src_mac0, dev->dev_addr, ETH_ALEN);
+ skb->priority = 1;
+ offload_tx(&adapter->tdev, skb);
+ return 0;
+}
+
+static int init_smt(struct adapter *adapter)
+{
+ int i;
+
+ for_each_port(adapter, i)
+ write_smt_entry(adapter, i);
+ return 0;
+}
+
+static void init_port_mtus(struct adapter *adapter)
+{
+ unsigned int mtus = adapter->port[0].dev->mtu;
+
+ if (adapter->port[1].dev)
+ mtus |= adapter->port[1].dev->mtu << 16;
+ t3_write_reg(adapter, A_TP_MTU_PORT_TABLE, mtus);
+}
+
+/**
+ * cxgb_up - enable the adapter
+ * @adapter: adapter being enabled
+ *
+ * Called when the first port is enabled, this function performs the
+ * actions necessary to make an adapter operational, such as completing
+ * the initialization of HW modules, and enabling interrupts.
+ *
+ * Must be called with the rtnl lock held.
+ */
+static int cxgb_up(struct adapter *adap)
+{
+ int err = 0;
+
+ if (!(adap->flags & FULL_INIT_DONE)) {
+ err = t3_check_fw_version(adap);
+ if (err) {
+ dev_err(&adap->pdev->dev,
+ "adapter FW is not compatible with driver\n");
+ goto out;
+ }
+
+ err = init_dummy_netdevs(adap);
+ if (err)
+ goto out;
+
+ err = t3_init_hw(adap, 0);
+ if (err)
+ goto out;
+
+ err = setup_sge_qsets(adap);
+ if (err)
+ goto out;
+
+ setup_rss(adap);
+ adap->flags |= FULL_INIT_DONE;
+ }
+
+ t3_intr_clear(adap);
+
+ if (adap->flags & USING_MSIX) {
+ name_msix_vecs(adap);
+ err = request_irq(adap->msix_info[0].vec,
+ t3_async_intr_handler, 0,
+ adap->msix_info[0].desc, adap);
+ if (err)
+ goto irq_err;
+
+ if (request_msix_data_irqs(adap)) {
+ free_irq(adap->msix_info[0].vec, adap);
+ goto irq_err;
+ }
+ } else if ((err = request_irq(adap->pdev->irq,
+ t3_intr_handler(adap,
+ adap->sge.qs[0].rspq.
+ polling),
+ (adap->flags & USING_MSI) ? 0 : SA_SHIRQ,
+ adap->name, adap)))
+ goto irq_err;
+
+ t3_sge_start(adap);
+ t3_intr_enable(adap);
+out:
+ return err;
+irq_err:
+ CH_ERR("%s: request_irq failed, err %d\n", adap->name, err);
+ goto out;
+}
+
+/*
+ * Release resources when all the ports and offloading have been stopped.
+ */
+static void cxgb_down(struct adapter *adapter)
+{
+ t3_sge_stop(adapter);
+ spin_lock_irq(&adapter->work_lock); /* sync with PHY intr task */
+ t3_intr_disable(adapter);
+ spin_unlock_irq(&adapter->work_lock);
+
+ if (adapter->flags & USING_MSIX) {
+ int i, n = 0;
+
+ free_irq(adapter->msix_info[0].vec, adapter);
+ for_each_port(adapter, i)
+ n += adapter->port[i].nqsets;
+
+ for (i = 0; i < n; ++i)
+ free_irq(adapter->msix_info[i + 1].vec,
+ &adapter->sge.qs[i]);
+ } else
+ free_irq(adapter->pdev->irq, adapter);
+
+ flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */
+ quiesce_rx(adapter);
+}
+
+static void schedule_chk_task(struct adapter *adap)
+{
+ unsigned int timeo;
+
+ timeo = adap->params.linkpoll_period ?
+ (HZ * adap->params.linkpoll_period) / 10 :
+ adap->params.stats_update_period * HZ;
+ if (timeo)
+ queue_delayed_work(cxgb3_wq, &adap->adap_check_task, timeo);
+}
+
+static int offload_open(struct net_device *dev)
+{
+ struct adapter *adapter = (struct adapter *)dev->priv;
+ struct t3cdev *tdev = T3CDEV(dev);
+ int adap_up = adapter->open_device_map & PORT_MASK;
+ int err = 0;
+
+ if (test_and_set_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map))
+ return 0;
+
+ if (!adap_up && (err = cxgb_up(adapter)) < 0)
+ return err;
+
+ t3_tp_set_offload_mode(adapter, 1);
+ tdev->lldev = adapter->port[0].dev;
+ err = cxgb3_offload_activate(adapter);
+ if (err)
+ goto out;
+
+ init_port_mtus(adapter);
+ t3_load_mtus(adapter, adapter->params.mtus, adapter->params.a_wnd,
+ adapter->params.b_wnd,
+ adapter->params.rev == 0 ?
+ adapter->port[0].dev->mtu : 0xffff);
+ init_smt(adapter);
+
+ /* Never mind if the next step fails */
+ sysfs_create_group(&tdev->lldev->class_dev.kobj, &offload_attr_group);
+
+ /* Call back all registered clients */
+ cxgb3_add_clients(tdev);
+
+out:
+ /* restore them in case the offload module has changed them */
+ if (err) {
+ t3_tp_set_offload_mode(adapter, 0);
+ clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map);
+ cxgb3_set_dummy_ops(tdev);
+ }
+ return err;
+}
+
+static int offload_close(struct t3cdev *tdev)
+{
+ struct adapter *adapter = tdev2adap(tdev);
+
+ if (!test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map))
+ return 0;
+
+ /* Call back all registered clients */
+ cxgb3_remove_clients(tdev);
+
+ sysfs_remove_group(&tdev->lldev->class_dev.kobj, &offload_attr_group);
+
+ tdev->lldev = NULL;
+ cxgb3_set_dummy_ops(tdev);
+ t3_tp_set_offload_mode(adapter, 0);
+ clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map);
+
+ if (!adapter->open_device_map)
+ cxgb_down(adapter);
+
+ cxgb3_offload_deactivate(adapter);
+ return 0;
+}
+
+static int cxgb_open(struct net_device *dev)
+{
+ int err;
+ struct adapter *adapter = dev->priv;
+ int other_ports = adapter->open_device_map & PORT_MASK;
+
+ if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0)
+ return err;
+
+ set_bit(dev->if_port, &adapter->open_device_map);
+
+ if (!ofld_disable) {
+ err = offload_open(dev);
+ if (err)
+ printk(KERN_WARNING
+ "Could not initialize offload capabilities\n");
+ }
+
+ link_start(&adapter->port[dev->if_port]);
+ t3_port_intr_enable(adapter, dev->if_port);
+ netif_start_queue(dev);
+ if (!other_ports)
+ schedule_chk_task(adapter);
+
+ return 0;
+}
+
+static int cxgb_close(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+
+ t3_port_intr_disable(adapter, dev->if_port);
+ netif_stop_queue(dev);
+ p->phy.ops->power_down(&p->phy, 1);
+ netif_carrier_off(dev);
+ t3_mac_disable(&p->mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX);
+
+ spin_lock(&adapter->work_lock); /* sync with update task */
+ clear_bit(dev->if_port, &adapter->open_device_map);
+ spin_unlock(&adapter->work_lock);
+
+ if (!(adapter->open_device_map & PORT_MASK))
+ cancel_rearming_delayed_workqueue(cxgb3_wq,
+ &adapter->adap_check_task);
+
+ if (!adapter->open_device_map)
+ cxgb_down(adapter);
+
+ return 0;
+}
+
+static struct net_device_stats *cxgb_get_stats(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+ struct net_device_stats *ns = &p->netstats;
+ const struct mac_stats *pstats;
+
+ spin_lock(&adapter->stats_lock);
+ pstats = t3_mac_update_stats(&p->mac);
+ spin_unlock(&adapter->stats_lock);
+
+ ns->tx_bytes = pstats->tx_octets;
+ ns->tx_packets = pstats->tx_frames;
+ ns->rx_bytes = pstats->rx_octets;
+ ns->rx_packets = pstats->rx_frames;
+ ns->multicast = pstats->rx_mcast_frames;
+
+ ns->tx_errors = pstats->tx_underrun;
+ ns->rx_errors = pstats->rx_symbol_errs + pstats->rx_fcs_errs +
+ pstats->rx_too_long + pstats->rx_jabber + pstats->rx_short +
+ pstats->rx_fifo_ovfl;
+
+ /* detailed rx_errors */
+ ns->rx_length_errors = pstats->rx_jabber + pstats->rx_too_long;
+ ns->rx_over_errors = 0;
+ ns->rx_crc_errors = pstats->rx_fcs_errs;
+ ns->rx_frame_errors = pstats->rx_symbol_errs;
+ ns->rx_fifo_errors = pstats->rx_fifo_ovfl;
+ ns->rx_missed_errors = pstats->rx_cong_drops;
+
+ /* detailed tx_errors */
+ ns->tx_aborted_errors = 0;
+ ns->tx_carrier_errors = 0;
+ ns->tx_fifo_errors = pstats->tx_underrun;
+ ns->tx_heartbeat_errors = 0;
+ ns->tx_window_errors = 0;
+ return ns;
+}
+
+static u32 get_msglevel(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+
+ return adapter->msg_enable;
+}
+
+static void set_msglevel(struct net_device *dev, u32 val)
+{
+ struct adapter *adapter = dev->priv;
+
+ adapter->msg_enable = val;
+}
+
+static char stats_strings[][ETH_GSTRING_LEN] = {
+ "TxOctetsOK ",
+ "TxFramesOK ",
+ "TxMulticastFramesOK",
+ "TxBroadcastFramesOK",
+ "TxPauseFrames ",
+ "TxUnderrun ",
+ "TxExtUnderrun ",
+
+ "TxFrames64 ",
+ "TxFrames65To127 ",
+ "TxFrames128To255 ",
+ "TxFrames256To511 ",
+ "TxFrames512To1023 ",
+ "TxFrames1024To1518 ",
+ "TxFrames1519ToMax ",
+
+ "RxOctetsOK ",
+ "RxFramesOK ",
+ "RxMulticastFramesOK",
+ "RxBroadcastFramesOK",
+ "RxPauseFrames ",
+ "RxFCSErrors ",
+ "RxSymbolErrors ",
+ "RxShortErrors ",
+ "RxJabberErrors ",
+ "RxLengthErrors ",
+ "RxFIFOoverflow ",
+
+ "RxFrames64 ",
+ "RxFrames65To127 ",
+ "RxFrames128To255 ",
+ "RxFrames256To511 ",
+ "RxFrames512To1023 ",
+ "RxFrames1024To1518 ",
+ "RxFrames1519ToMax ",
+
+ "PhyFIFOErrors ",
+ "TSO ",
+ "VLANextractions ",
+ "VLANinsertions ",
+ "TxCsumOffload ",
+ "RxCsumGood ",
+ "RxDrops "
+};
+
+static int get_stats_count(struct net_device *dev)
+{
+ return ARRAY_SIZE(stats_strings);
+}
+
+#define T3_REGMAP_SIZE (3 * 1024)
+
+static int get_regs_len(struct net_device *dev)
+{
+ return T3_REGMAP_SIZE;
+}
+
+static int get_eeprom_len(struct net_device *dev)
+{
+ return EEPROMSIZE;
+}
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ u32 fw_vers = 0;
+ struct adapter *adapter = dev->priv;
+
+ t3_get_fw_version(adapter, &fw_vers);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(adapter->pdev));
+ if (!fw_vers)
+ strcpy(info->fw_version, "N/A");
+ else
+ snprintf(info->fw_version, sizeof(info->fw_version),
+ "%s %u.%u", (fw_vers >> 24) ? "T" : "N",
+ (fw_vers >> 12) & 0xfff, fw_vers & 0xfff);
+}
+
+static void get_strings(struct net_device *dev, u32 stringset, u8 * data)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(data, stats_strings, sizeof(stats_strings));
+}
+
+static unsigned long collect_sge_port_stats(struct adapter *adapter, int port,
+ int idx)
+{
+ int i;
+ unsigned long tot = 0;
+ struct port_info *p = &adapter->port[port];
+
+ for (i = 0; i < p->nqsets; ++i)
+ tot += adapter->sge.qs[i + p->first_qset].port_stats[idx];
+ return tot;
+}
+
+static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
+ u64 * data)
+{
+ struct adapter *adapter = dev->priv;
+ int port_id = dev->if_port;
+ const struct mac_stats *s;
+
+ spin_lock(&adapter->stats_lock);
+ s = t3_mac_update_stats(&adapter->port[port_id].mac);
+ spin_unlock(&adapter->stats_lock);
+
+ *data++ = s->tx_octets;
+ *data++ = s->tx_frames;
+ *data++ = s->tx_mcast_frames;
+ *data++ = s->tx_bcast_frames;
+ *data++ = s->tx_pause;
+ *data++ = s->tx_underrun;
+ *data++ = s->tx_fifo_urun;
+
+ *data++ = s->tx_frames_64;
+ *data++ = s->tx_frames_65_127;
+ *data++ = s->tx_frames_128_255;
+ *data++ = s->tx_frames_256_511;
+ *data++ = s->tx_frames_512_1023;
+ *data++ = s->tx_frames_1024_1518;
+ *data++ = s->tx_frames_1519_max;
+
+ *data++ = s->rx_octets;
+ *data++ = s->rx_frames;
+ *data++ = s->rx_mcast_frames;
+ *data++ = s->rx_bcast_frames;
+ *data++ = s->rx_pause;
+ *data++ = s->rx_fcs_errs;
+ *data++ = s->rx_symbol_errs;
+ *data++ = s->rx_short;
+ *data++ = s->rx_jabber;
+ *data++ = s->rx_too_long;
+ *data++ = s->rx_fifo_ovfl;
+
+ *data++ = s->rx_frames_64;
+ *data++ = s->rx_frames_65_127;
+ *data++ = s->rx_frames_128_255;
+ *data++ = s->rx_frames_256_511;
+ *data++ = s->rx_frames_512_1023;
+ *data++ = s->rx_frames_1024_1518;
+ *data++ = s->rx_frames_1519_max;
+
+ *data++ = adapter->port[port_id].phy.fifo_errors;
+
+ *data++ = collect_sge_port_stats(adapter, port_id, SGE_PSTAT_TSO);
+ *data++ = collect_sge_port_stats(adapter, port_id, SGE_PSTAT_VLANEX);
+ *data++ = collect_sge_port_stats(adapter, port_id, SGE_PSTAT_VLANINS);
+ *data++ = collect_sge_port_stats(adapter, port_id, SGE_PSTAT_TX_CSUM);
+ *data++ = collect_sge_port_stats(adapter, port_id,
+ SGE_PSTAT_RX_CSUM_GOOD);
+ *data++ = s->rx_cong_drops;
+}
+
+static inline void reg_block_dump(struct adapter *ap, void *buf,
+ unsigned int start, unsigned int end)
+{
+ u32 *p = buf + start;
+
+ for (; start <= end; start += sizeof(u32))
+ *p++ = t3_read_reg(ap, start);
+}
+
+static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *buf)
+{
+ struct adapter *ap = dev->priv;
+
+ /*
+ * Version scheme:
+ * bits 0..9: chip version
+ * bits 10..15: chip revision
+ * bit 31: set for PCIe cards
+ */
+ regs->version = 3 | (ap->params.rev << 10) | (is_pcie(ap) << 31);
+
+ /*
+ * We skip the MAC statistics registers because they are clear-on-read.
+ * Also reading multi-register stats would need to synchronize with the
+ * periodic mac stats accumulation. Hard to justify the complexity.
+ */
+ memset(buf, 0, T3_REGMAP_SIZE);
+ reg_block_dump(ap, buf, 0, A_SG_RSPQ_CREDIT_RETURN);
+ reg_block_dump(ap, buf, A_SG_HI_DRB_HI_THRSH, A_ULPRX_PBL_ULIMIT);
+ reg_block_dump(ap, buf, A_ULPTX_CONFIG, A_MPS_INT_CAUSE);
+ reg_block_dump(ap, buf, A_CPL_SWITCH_CNTRL, A_CPL_MAP_TBL_DATA);
+ reg_block_dump(ap, buf, A_SMB_GLOBAL_TIME_CFG, A_XGM_SERDES_STAT3);
+ reg_block_dump(ap, buf, A_XGM_SERDES_STATUS0,
+ XGM_REG(A_XGM_SERDES_STAT3, 1));
+ reg_block_dump(ap, buf, XGM_REG(A_XGM_SERDES_STATUS0, 1),
+ XGM_REG(A_XGM_RX_SPI4_SOP_EOP_CNT, 1));
+}
+
+static int restart_autoneg(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+
+ if (!netif_running(dev))
+ return -EAGAIN;
+ if (p->link_config.autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+ p->phy.ops->autoneg_restart(&p->phy);
+ return 0;
+}
+
+static int cxgb3_phys_id(struct net_device *dev, u32 data)
+{
+ int i;
+ struct adapter *adapter = dev->priv;
+
+ if (data == 0)
+ data = 2;
+
+ for (i = 0; i < data * 2; i++) {
+ t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
+ (i & 1) ? F_GPIO0_OUT_VAL : 0);
+ if (msleep_interruptible(500))
+ break;
+ }
+ t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
+ F_GPIO0_OUT_VAL);
+ return 0;
+}
+
+static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+
+ cmd->supported = p->link_config.supported;
+ cmd->advertising = p->link_config.advertising;
+
+ if (netif_carrier_ok(dev)) {
+ cmd->speed = p->link_config.speed;
+ cmd->duplex = p->link_config.duplex;
+ } else {
+ cmd->speed = -1;
+ cmd->duplex = -1;
+ }
+
+ cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
+ cmd->phy_address = p->phy.addr;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->autoneg = p->link_config.autoneg;
+ cmd->maxtxpkt = 0;
+ cmd->maxrxpkt = 0;
+ return 0;
+}
+
+static int speed_duplex_to_caps(int speed, int duplex)
+{
+ int cap = 0;
+
+ switch (speed) {
+ case SPEED_10:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_10baseT_Full;
+ else
+ cap = SUPPORTED_10baseT_Half;
+ break;
+ case SPEED_100:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_100baseT_Full;
+ else
+ cap = SUPPORTED_100baseT_Half;
+ break;
+ case SPEED_1000:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_1000baseT_Full;
+ else
+ cap = SUPPORTED_1000baseT_Half;
+ break;
+ case SPEED_10000:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_10000baseT_Full;
+ }
+ return cap;
+}
+
+#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
+ ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \
+ ADVERTISED_10000baseT_Full)
+
+static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+ struct link_config *lc = &p->link_config;
+
+ if (!(lc->supported & SUPPORTED_Autoneg))
+ return -EOPNOTSUPP; /* can't change speed/duplex */
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
+ int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+
+ if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
+ return -EINVAL;
+ lc->requested_speed = cmd->speed;
+ lc->requested_duplex = cmd->duplex;
+ lc->advertising = 0;
+ } else {
+ cmd->advertising &= ADVERTISED_MASK;
+ cmd->advertising &= lc->supported;
+ if (!cmd->advertising)
+ return -EINVAL;
+ lc->requested_speed = SPEED_INVALID;
+ lc->requested_duplex = DUPLEX_INVALID;
+ lc->advertising = cmd->advertising | ADVERTISED_Autoneg;
+ }
+ lc->autoneg = cmd->autoneg;
+ if (netif_running(dev))
+ t3_link_start(&p->phy, &p->mac, lc);
+ return 0;
+}
+
+static void get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+
+ epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0;
+ epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0;
+ epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0;
+}
+
+static int set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = &adapter->port[dev->if_port];
+ struct link_config *lc = &p->link_config;
+
+ if (epause->autoneg == AUTONEG_DISABLE)
+ lc->requested_fc = 0;
+ else if (lc->supported & SUPPORTED_Autoneg)
+ lc->requested_fc = PAUSE_AUTONEG;
+ else
+ return -EINVAL;
+
+ if (epause->rx_pause)
+ lc->requested_fc |= PAUSE_RX;
+ if (epause->tx_pause)
+ lc->requested_fc |= PAUSE_TX;
+ if (lc->autoneg == AUTONEG_ENABLE) {
+ if (netif_running(dev))
+ t3_link_start(&p->phy, &p->mac, lc);
+ } else {
+ lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ if (netif_running(dev))
+ t3_mac_set_speed_duplex_fc(&p->mac, -1, -1, lc->fc);
+ }
+ return 0;
+}
+
+static u32 get_rx_csum(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+
+ return adapter->port[dev->if_port].rx_csum_offload;
+}
+
+static int set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct adapter *adapter = dev->priv;
+
+ adapter->port[dev->if_port].rx_csum_offload = data;
+ return 0;
+}
+
+static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+ struct adapter *adapter = dev->priv;
+
+ e->rx_max_pending = MAX_RX_BUFFERS;
+ e->rx_mini_max_pending = 0;
+ e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS;
+ e->tx_max_pending = MAX_TXQ_ENTRIES;
+
+ e->rx_pending = adapter->params.sge.qset[0].fl_size;
+ e->rx_mini_pending = adapter->params.sge.qset[0].rspq_size;
+ e->rx_jumbo_pending = adapter->params.sge.qset[0].jumbo_size;
+ e->tx_pending = adapter->params.sge.qset[0].txq_size[0];
+}
+
+static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+ int i;
+ struct adapter *adapter = dev->priv;
+
+ if (e->rx_pending > MAX_RX_BUFFERS ||
+ e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS ||
+ e->tx_pending > MAX_TXQ_ENTRIES ||
+ e->rx_mini_pending > MAX_RSPQ_ENTRIES ||
+ e->rx_mini_pending < MIN_RSPQ_ENTRIES ||
+ e->rx_pending < MIN_FL_ENTRIES ||
+ e->rx_jumbo_pending < MIN_FL_ENTRIES ||
+ e->tx_pending < adapter->params.nports * MIN_TXQ_ENTRIES)
+ return -EINVAL;
+
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+
+ for (i = 0; i < SGE_QSETS; ++i) {
+ struct qset_params *q = &adapter->params.sge.qset[i];
+
+ q->rspq_size = e->rx_mini_pending;
+ q->fl_size = e->rx_pending;
+ q->jumbo_size = e->rx_jumbo_pending;
+ q->txq_size[0] = e->tx_pending;
+ q->txq_size[1] = e->tx_pending;
+ q->txq_size[2] = e->tx_pending;
+ }
+ return 0;
+}
+
+static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+ struct adapter *adapter = dev->priv;
+ struct qset_params *qsp = &adapter->params.sge.qset[0];
+ struct sge_qset *qs = &adapter->sge.qs[0];
+
+ if (c->rx_coalesce_usecs * 10 > M_NEWTIMER)
+ return -EINVAL;
+
+ qsp->coalesce_usecs = c->rx_coalesce_usecs;
+ t3_update_qset_coalesce(qs, qsp);
+ return 0;
+}
+
+static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+ struct adapter *adapter = dev->priv;
+ struct qset_params *q = adapter->params.sge.qset;
+
+ c->rx_coalesce_usecs = q->coalesce_usecs;
+ return 0;
+}
+
+static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
+ u8 * data)
+{
+ int i, err = 0;
+ struct adapter *adapter = dev->priv;
+
+ u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ e->magic = EEPROM_MAGIC;
+ for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4)
+ err = t3_seeprom_read(adapter, i, (u32 *) & buf[i]);
+
+ if (!err)
+ memcpy(data, buf + e->offset, e->len);
+ kfree(buf);
+ return err;
+}
+
+static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 * data)
+{
+ u8 *buf;
+ int err = 0;
+ u32 aligned_offset, aligned_len, *p;
+ struct adapter *adapter = dev->priv;
+
+ if (eeprom->magic != EEPROM_MAGIC)
+ return -EINVAL;
+
+ aligned_offset = eeprom->offset & ~3;
+ aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3;
+
+ if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) {
+ buf = kmalloc(aligned_len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ err = t3_seeprom_read(adapter, aligned_offset, (u32 *) buf);
+ if (!err && aligned_len > 4)
+ err = t3_seeprom_read(adapter,
+ aligned_offset + aligned_len - 4,
+ (u32 *) & buf[aligned_len - 4]);
+ if (err)
+ goto out;
+ memcpy(buf + (eeprom->offset & 3), data, eeprom->len);
+ } else
+ buf = data;
+
+ err = t3_seeprom_wp(adapter, 0);
+ if (err)
+ goto out;
+
+ for (p = (u32 *) buf; !err && aligned_len; aligned_len -= 4, p++) {
+ err = t3_seeprom_write(adapter, aligned_offset, *p);
+ aligned_offset += 4;
+ }
+
+ if (!err)
+ err = t3_seeprom_wp(adapter, 1);
+out:
+ if (buf != data)
+ kfree(buf);
+ return err;
+}
+
+static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ wol->supported = 0;
+ wol->wolopts = 0;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+static struct ethtool_ops cxgb_ethtool_ops = {
+ .get_settings = get_settings,
+ .set_settings = set_settings,
+ .get_drvinfo = get_drvinfo,
+ .get_msglevel = get_msglevel,
+ .set_msglevel = set_msglevel,
+ .get_ringparam = get_sge_param,
+ .set_ringparam = set_sge_param,
+ .get_coalesce = get_coalesce,
+ .set_coalesce = set_coalesce,
+ .get_eeprom_len = get_eeprom_len,
+ .get_eeprom = get_eeprom,
+ .set_eeprom = set_eeprom,
+ .get_pauseparam = get_pauseparam,
+ .set_pauseparam = set_pauseparam,
+ .get_rx_csum = get_rx_csum,
+ .set_rx_csum = set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_link = ethtool_op_get_link,
+ .get_strings = get_strings,
+ .phys_id = cxgb3_phys_id,
+ .nway_reset = restart_autoneg,
+ .get_stats_count = get_stats_count,
+ .get_ethtool_stats = get_stats,
+ .get_regs_len = get_regs_len,
+ .get_regs = get_regs,
+ .get_wol = get_wol,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+#ifdef ETHTOOL_GPERMADDR
+ .get_perm_addr = ethtool_op_get_perm_addr
+#endif
+};
+
+static int in_range(int val, int lo, int hi)
+{
+ return val < 0 || (val <= hi && val >= lo);
+}
+
+static int cxgb_extension_ioctl(struct net_device *dev, void __user * useraddr)
+{
+ int ret;
+ u32 cmd;
+ struct adapter *adapter = dev->priv;
+
+ if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case CHELSIO_SETREG:{
+ struct ch_reg edata;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+ if ((edata.addr & 3) != 0
+ || edata.addr >= adapter->mmio_len)
+ return -EINVAL;
+ writel(edata.val, adapter->regs + edata.addr);
+ break;
+ }
+ case CHELSIO_GETREG:{
+ struct ch_reg edata;
+
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+ if ((edata.addr & 3) != 0
+ || edata.addr >= adapter->mmio_len)
+ return -EINVAL;
+ edata.val = readl(adapter->regs + edata.addr);
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ break;
+ }
+ case CHELSIO_SET_QSET_PARAMS:{
+ int i;
+ struct qset_params *q;
+ struct ch_qset_params t;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+ if (t.qset_idx >= SGE_QSETS)
+ return -EINVAL;
+ if (!in_range(t.intr_lat, 0, M_NEWTIMER) ||
+ !in_range(t.cong_thres, 0, 255) ||
+ !in_range(t.txq_size[0], MIN_TXQ_ENTRIES,
+ MAX_TXQ_ENTRIES) ||
+ !in_range(t.txq_size[1], MIN_TXQ_ENTRIES,
+ MAX_TXQ_ENTRIES) ||
+ !in_range(t.txq_size[2], MIN_CTRL_TXQ_ENTRIES,
+ MAX_CTRL_TXQ_ENTRIES) ||
+ !in_range(t.fl_size[0], MIN_FL_ENTRIES,
+ MAX_RX_BUFFERS)
+ || !in_range(t.fl_size[1], MIN_FL_ENTRIES,
+ MAX_RX_JUMBO_BUFFERS)
+ || !in_range(t.rspq_size, MIN_RSPQ_ENTRIES,
+ MAX_RSPQ_ENTRIES))
+ return -EINVAL;
+ if ((adapter->flags & FULL_INIT_DONE) &&
+ (t.rspq_size >= 0 || t.fl_size[0] >= 0 ||
+ t.fl_size[1] >= 0 || t.txq_size[0] >= 0 ||
+ t.txq_size[1] >= 0 || t.txq_size[2] >= 0 ||
+ t.polling >= 0 || t.cong_thres >= 0))
+ return -EBUSY;
+
+ q = &adapter->params.sge.qset[t.qset_idx];
+
+ if (t.rspq_size >= 0)
+ q->rspq_size = t.rspq_size;
+ if (t.fl_size[0] >= 0)
+ q->fl_size = t.fl_size[0];
+ if (t.fl_size[1] >= 0)
+ q->jumbo_size = t.fl_size[1];
+ if (t.txq_size[0] >= 0)
+ q->txq_size[0] = t.txq_size[0];
+ if (t.txq_size[1] >= 0)
+ q->txq_size[1] = t.txq_size[1];
+ if (t.txq_size[2] >= 0)
+ q->txq_size[2] = t.txq_size[2];
+ if (t.cong_thres >= 0)
+ q->cong_thres = t.cong_thres;
+ if (t.intr_lat >= 0) {
+ struct sge_qset *qs =
+ &adapter->sge.qs[t.qset_idx];
+
+ q->coalesce_usecs = t.intr_lat;
+ t3_update_qset_coalesce(qs, q);
+ }
+ if (t.polling >= 0) {
+ if (adapter->flags & USING_MSIX)
+ q->polling = t.polling;
+ else {
+ /* No polling with INTx for T3A */
+ if (adapter->params.rev == 0 &&
+ !(adapter->flags & USING_MSI))
+ t.polling = 0;
+
+ for (i = 0; i < SGE_QSETS; i++) {
+ q = &adapter->params.sge.
+ qset[i];
+ q->polling = t.polling;
+ }
+ }
+ }
+ break;
+ }
+ case CHELSIO_GET_QSET_PARAMS:{
+ struct qset_params *q;
+ struct ch_qset_params t;
+
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+ if (t.qset_idx >= SGE_QSETS)
+ return -EINVAL;
+
+ q = &adapter->params.sge.qset[t.qset_idx];
+ t.rspq_size = q->rspq_size;
+ t.txq_size[0] = q->txq_size[0];
+ t.txq_size[1] = q->txq_size[1];
+ t.txq_size[2] = q->txq_size[2];
+ t.fl_size[0] = q->fl_size;
+ t.fl_size[1] = q->jumbo_size;
+ t.polling = q->polling;
+ t.intr_lat = q->coalesce_usecs;
+ t.cong_thres = q->cong_thres;
+
+ if (copy_to_user(useraddr, &t, sizeof(t)))
+ return -EFAULT;
+ break;
+ }
+ case CHELSIO_SET_QSET_NUM:{
+ struct ch_reg edata;
+ unsigned int port_idx = dev->if_port;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+ if (edata.val < 1 ||
+ (edata.val > 1 && !(adapter->flags & USING_MSIX)))
+ return -EINVAL;
+ if (edata.val + adapter->port[!port_idx].nqsets >
+ SGE_QSETS)
+ return -EINVAL;
+ adapter->port[port_idx].nqsets = edata.val;
+ adapter->port[1].first_qset = adapter->port[0].nqsets;
+ break;
+ }
+ case CHELSIO_GET_QSET_NUM:{
+ struct ch_reg edata;
+
+ edata.cmd = CHELSIO_GET_QSET_NUM;
+ edata.val = adapter->port[dev->if_port].nqsets;
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ break;
+ }
+ case CHELSIO_LOAD_FW:{
+ u8 *fw_data;
+ struct ch_mem_range t;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+
+ fw_data = kmalloc(t.len, GFP_KERNEL);
+ if (!fw_data)
+ return -ENOMEM;
+
+ if (copy_from_user
+ (fw_data, useraddr + sizeof(t), t.len)) {
+ kfree(fw_data);
+ return -EFAULT;
+ }
+
+ ret = t3_load_fw(adapter, fw_data, t.len);
+ kfree(fw_data);
+ if (ret)
+ return ret;
+ break;
+ }
+ case CHELSIO_SETMTUTAB:{
+ struct ch_mtus m;
+ int i;
+
+ if (!is_offload(adapter))
+ return -EOPNOTSUPP;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (offload_running(adapter))
+ return -EBUSY;
+ if (copy_from_user(&m, useraddr, sizeof(m)))
+ return -EFAULT;
+ if (m.nmtus != NMTUS)
+ return -EINVAL;
+ if (m.mtus[0] < 81) /* accommodate SACK */
+ return -EINVAL;
+
+ // MTUs must be in ascending order
+ for (i = 1; i < NMTUS; ++i)
+ if (m.mtus[i] < m.mtus[i - 1])
+ return -EINVAL;
+
+ memcpy(adapter->params.mtus, m.mtus,
+ sizeof(adapter->params.mtus));
+ break;
+ }
+ case CHELSIO_GET_PM:{
+ struct tp_params *p = &adapter->params.tp;
+ struct ch_pm m = {.cmd = CHELSIO_GET_PM };
+
+ if (!is_offload(adapter))
+ return -EOPNOTSUPP;
+ m.tx_pg_sz = p->tx_pg_size;
+ m.tx_num_pg = p->tx_num_pgs;
+ m.rx_pg_sz = p->rx_pg_size;
+ m.rx_num_pg = p->rx_num_pgs;
+ m.pm_total = p->pmtx_size + p->chan_rx_size * p->nchan;
+ if (copy_to_user(useraddr, &m, sizeof(m)))
+ return -EFAULT;
+ break;
+ }
+ case CHELSIO_SET_PM:{
+ struct ch_pm m;
+ struct tp_params *p = &adapter->params.tp;
+
+ if (!is_offload(adapter))
+ return -EOPNOTSUPP;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+ if (copy_from_user(&m, useraddr, sizeof(m)))
+ return -EFAULT;
+ if (!m.rx_pg_sz || (m.rx_pg_sz & (m.rx_pg_sz - 1)) ||
+ !m.tx_pg_sz || (m.tx_pg_sz & (m.tx_pg_sz - 1)))
+ return -EINVAL; /* not power of 2 */
+ if (!(m.rx_pg_sz & 0x14000))
+ return -EINVAL; /* not 16KB or 64KB */
+ if (!(m.tx_pg_sz & 0x1554000))
+ return -EINVAL;
+ if (m.tx_num_pg == -1)
+ m.tx_num_pg = p->tx_num_pgs;
+ if (m.rx_num_pg == -1)
+ m.rx_num_pg = p->rx_num_pgs;
+ if (m.tx_num_pg % 24 || m.rx_num_pg % 24)
+ return -EINVAL;
+ if (m.rx_num_pg * m.rx_pg_sz > p->chan_rx_size ||
+ m.tx_num_pg * m.tx_pg_sz > p->chan_tx_size)
+ return -EINVAL;
+ p->rx_pg_size = m.rx_pg_sz;
+ p->tx_pg_size = m.tx_pg_sz;
+ p->rx_num_pgs = m.rx_num_pg;
+ p->tx_num_pgs = m.tx_num_pg;
+ break;
+ }
+ case CHELSIO_GET_MEM:{
+ struct ch_mem_range t;
+ struct mc7 *mem;
+ u64 buf[32];
+
+ if (!is_offload(adapter))
+ return -EOPNOTSUPP;
+ if (!(adapter->flags & FULL_INIT_DONE))
+ return -EIO; /* need the memory controllers */
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+ if ((t.addr & 7) || (t.len & 7))
+ return -EINVAL;
+ if (t.mem_id == MEM_CM)
+ mem = &adapter->cm;
+ else if (t.mem_id == MEM_PMRX)
+ mem = &adapter->pmrx;
+ else if (t.mem_id == MEM_PMTX)
+ mem = &adapter->pmtx;
+ else
+ return -EINVAL;
+
+ /*
+ * Version scheme:
+ * bits 0..9: chip version
+ * bits 10..15: chip revision
+ */
+ t.version = 3 | (adapter->params.rev << 10);
+ if (copy_to_user(useraddr, &t, sizeof(t)))
+ return -EFAULT;
+
+ /*
+ * Read 256 bytes at a time as len can be large and we don't
+ * want to use huge intermediate buffers.
+ */
+ useraddr += sizeof(t); /* advance to start of buffer */
+ while (t.len) {
+ unsigned int chunk =
+ min_t(unsigned int, t.len, sizeof(buf));
+
+ ret =
+ t3_mc7_bd_read(mem, t.addr / 8, chunk / 8,
+ buf);
+ if (ret)
+ return ret;
+ if (copy_to_user(useraddr, buf, chunk))
+ return -EFAULT;
+ useraddr += chunk;
+ t.addr += chunk;
+ t.len -= chunk;
+ }
+ break;
+ }
+ case CHELSIO_SET_TRACE_FILTER:{
+ struct ch_trace t;
+ const struct trace_params *tp;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (!offload_running(adapter))
+ return -EAGAIN;
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+
+ tp = (const struct trace_params *)&t.sip;
+ if (t.config_tx)
+ t3_config_trace_filter(adapter, tp, 0,
+ t.invert_match,
+ t.trace_tx);
+ if (t.config_rx)
+ t3_config_trace_filter(adapter, tp, 1,
+ t.invert_match,
+ t.trace_rx);
+ break;
+ }
+ case CHELSIO_SET_PKTSCHED:{
+ struct sk_buff *skb;
+ struct ch_pktsched_params p;
+ struct mngt_pktsched_wr *req;
+
+ if (!(adapter->flags & FULL_INIT_DONE))
+ return -EIO; /* uP must be up and running */
+ if (copy_from_user(&p, useraddr, sizeof(p)))
+ return -EFAULT;
+ skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+ req =
+ (struct mngt_pktsched_wr *)skb_put(skb,
+ sizeof(*req));
+ req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_MNGT));
+ req->mngt_opcode = FW_MNGTOPCODE_PKTSCHED_SET;
+ req->sched = p.sched;
+ req->idx = p.idx;
+ req->min = p.min;
+ req->max = p.max;
+ req->binding = p.binding;
+ printk(KERN_INFO
+ "pktsched: sched %u idx %u min %u max %u binding %u\n",
+ req->sched, req->idx, req->min, req->max,
+ req->binding);
+ skb->priority = 1;
+ offload_tx(&adapter->tdev, skb);
+ break;
+ }
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ int ret, mmd;
+ struct adapter *adapter = dev->priv;
+ struct mii_ioctl_data *data = if_mii(req);
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->port[dev->if_port].phy.addr;
+ /* FALLTHRU */
+ case SIOCGMIIREG:{
+ u32 val;
+ struct cphy *phy = &adapter->port[dev->if_port].phy;
+
+ if (!phy->mdio_read)
+ return -EOPNOTSUPP;
+ if (is_10G(adapter)) {
+ mmd = data->phy_id >> 8;
+ if (!mmd)
+ mmd = MDIO_DEV_PCS;
+ else if (mmd > MDIO_DEV_XGXS)
+ return -EINVAL;
+
+ ret =
+ phy->mdio_read(adapter, data->phy_id & 0x1f,
+ mmd, data->reg_num, &val);
+ } else
+ ret =
+ phy->mdio_read(adapter, data->phy_id & 0x1f,
+ 0, data->reg_num & 0x1f,
+ &val);
+ if (!ret)
+ data->val_out = val;
+ break;
+ }
+ case SIOCSMIIREG:{
+ struct cphy *phy = &adapter->port[dev->if_port].phy;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (!phy->mdio_write)
+ return -EOPNOTSUPP;
+ if (is_10G(adapter)) {
+ mmd = data->phy_id >> 8;
+ if (!mmd)
+ mmd = MDIO_DEV_PCS;
+ else if (mmd > MDIO_DEV_XGXS)
+ return -EINVAL;
+
+ ret =
+ phy->mdio_write(adapter,
+ data->phy_id & 0x1f, mmd,
+ data->reg_num,
+ data->val_in);
+ } else
+ ret =
+ phy->mdio_write(adapter,
+ data->phy_id & 0x1f, 0,
+ data->reg_num & 0x1f,
+ data->val_in);
+ break;
+ }
+ case SIOCCHIOCTL:
+ return cxgb_extension_ioctl(dev, req->ifr_data);
+ default:
+ return -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
+{
+ int ret;
+ struct adapter *adapter = dev->priv;
+
+ if (new_mtu < 81) /* accommodate SACK */
+ return -EINVAL;
+ if ((ret = t3_mac_set_mtu(&adapter->port[dev->if_port].mac, new_mtu)))
+ return ret;
+ dev->mtu = new_mtu;
+ init_port_mtus(adapter);
+ if (adapter->params.rev == 0 && offload_running(adapter))
+ t3_load_mtus(adapter, adapter->params.mtus,
+ adapter->params.a_wnd, adapter->params.b_wnd,
+ adapter->port[0].dev->mtu);
+ return 0;
+}
+
+static int cxgb_set_mac_addr(struct net_device *dev, void *p)
+{
+ struct adapter *adapter = dev->priv;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ t3_mac_set_address(&adapter->port[dev->if_port].mac, 0, dev->dev_addr);
+ if (offload_running(adapter))
+ write_smt_entry(adapter, dev->if_port);
+ return 0;
+}
+
+/**
+ * t3_synchronize_rx - wait for current Rx processing on a port to complete
+ * @adap: the adapter
+ * @port: the port index
+ *
+ * Ensures that current Rx processing on any of the queues associated with
+ * the given port completes before returning. We do this by acquiring and
+ * releasing the locks of the response queues associated with the port.
+ */
+static void t3_synchronize_rx(struct adapter *adap, int port)
+{
+ int i;
+ const struct port_info *p = &adap->port[port];
+
+ for (i = 0; i < p->nqsets; i++) {
+ struct sge_rspq *q = &adap->sge.qs[i + p->first_qset].rspq;
+
+ spin_lock_irq(&q->lock);
+ spin_unlock_irq(&q->lock);
+ }
+}
+
+static void vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ unsigned int i, have_vlans, idx = dev->if_port;
+ struct adapter *adapter = dev->priv;
+
+ adapter->port[idx].vlan_grp = grp;
+ if (adapter->params.rev > 0)
+ t3_set_vlan_accel(adapter, 1 << idx, grp != NULL);
+ else {
+ /* single control for all ports */
+ have_vlans = 0;
+ for_each_port(adapter, i)
+ have_vlans |= adapter->port[i].vlan_grp != NULL;
+
+ t3_set_vlan_accel(adapter, 1, have_vlans);
+ }
+ t3_synchronize_rx(adapter, idx);
+}
+
+static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ /* nothing */
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void cxgb_netpoll(struct net_device *dev)
+{
+ unsigned long flags;
+ struct adapter *adapter = dev->priv;
+ struct sge_qset *qs = dev2qset(dev);
+
+ local_irq_save(flags);
+ t3_intr_handler(adapter, qs->rspq.polling) (adapter->pdev->irq,
+ adapter);
+ local_irq_restore(flags);
+}
+#endif
+
+/*
+ * Periodic accumulation of MAC statistics.
+ */
+static void mac_stats_update(struct adapter *adapter)
+{
+ int i;
+
+ for_each_port(adapter, i) {
+ struct port_info *p = &adapter->port[i];
+
+ if (netif_running(p->dev)) {
+ spin_lock(&adapter->stats_lock);
+ t3_mac_update_stats(&p->mac);
+ spin_unlock(&adapter->stats_lock);
+ }
+ }
+}
+
+static void check_link_status(struct adapter *adapter)
+{
+ int i;
+
+ for_each_port(adapter, i) {
+ struct port_info *p = &adapter->port[i];
+
+ if (!(p->port_type->caps & SUPPORTED_IRQ) &&
+ netif_running(p->dev))
+ t3_link_changed(adapter, i);
+ }
+}
+
+static void t3_adap_check_task(void *data)
+{
+ struct adapter *adapter = data;
+ const struct adapter_params *p = &adapter->params;
+
+ adapter->check_task_cnt++;
+
+ /* Check link status for PHYs without interrupts */
+ if (p->linkpoll_period)
+ check_link_status(adapter);
+
+ /* Accumulate MAC stats if needed */
+ if (!p->linkpoll_period ||
+ (adapter->check_task_cnt * p->linkpoll_period) / 10 >=
+ p->stats_update_period) {
+ mac_stats_update(adapter);
+ adapter->check_task_cnt = 0;
+ }
+
+ /* Schedule the next check update if any port is active. */
+ spin_lock(&adapter->work_lock);
+ if (adapter->open_device_map & PORT_MASK)
+ schedule_chk_task(adapter);
+ spin_unlock(&adapter->work_lock);
+}
+
+/*
+ * Processes external (PHY) interrupts in process context.
+ */
+static void ext_intr_task(void *data)
+{
+ struct adapter *adapter = data;
+
+ t3_phy_intr_handler(adapter);
+
+ /* Now reenable external interrupts */
+ spin_lock_irq(&adapter->work_lock);
+ if (adapter->slow_intr_mask) {
+ adapter->slow_intr_mask |= F_T3DBG;
+ t3_write_reg(adapter, A_PL_INT_CAUSE0, F_T3DBG);
+ t3_write_reg(adapter, A_PL_INT_ENABLE0,
+ adapter->slow_intr_mask);
+ }
+ spin_unlock_irq(&adapter->work_lock);
+}
+
+/*
+ * Interrupt-context handler for external (PHY) interrupts.
+ */
+void t3_os_ext_intr_handler(struct adapter *adapter)
+{
+ /*
+ * Schedule a task to handle external interrupts as they may be slow
+ * and we use a mutex to protect MDIO registers. We disable PHY
+ * interrupts in the meantime and let the task reenable them when
+ * it's done.
+ */
+ spin_lock(&adapter->work_lock);
+ if (adapter->slow_intr_mask) {
+ adapter->slow_intr_mask &= ~F_T3DBG;
+ t3_write_reg(adapter, A_PL_INT_ENABLE0,
+ adapter->slow_intr_mask);
+ queue_work(cxgb3_wq, &adapter->ext_intr_handler_task);
+ }
+ spin_unlock(&adapter->work_lock);
+}
+
+void t3_fatal_err(struct adapter *adapter)
+{
+ unsigned int fw_status[4];
+
+ if (adapter->flags & FULL_INIT_DONE) {
+ t3_sge_stop(adapter);
+ t3_intr_disable(adapter);
+ }
+ CH_ALERT("%s: encountered fatal error, operation suspended\n",
+ adapter->name);
+ if (!t3_cim_ctl_blk_read(adapter, 0xa0, 4, fw_status))
+ CH_ALERT("%s: FW status: 0x%x, 0x%x, 0x%x, 0x%x\n",
+ adapter->name, fw_status[0], fw_status[1],
+ fw_status[2], fw_status[3]);
+
+}
+
+static int __devinit cxgb_enable_msix(struct adapter *adap)
+{
+ struct msix_entry entries[SGE_QSETS + 1];
+ int i, err;
+
+ for (i = 0; i < ARRAY_SIZE(entries); ++i)
+ entries[i].entry = i;
+
+ err = pci_enable_msix(adap->pdev, entries, ARRAY_SIZE(entries));
+ if (!err) {
+ for (i = 0; i < ARRAY_SIZE(entries); ++i)
+ adap->msix_info[i].vec = entries[i].vector;
+ } else if (err > 0)
+ printk(KERN_INFO
+ "%s: only %d MSI-X vectors left, not using MSI-X\n",
+ adap->name, err);
+ return err;
+}
+
+static void __devinit print_port_info(struct adapter *adap,
+ const struct adapter_info *ai)
+{
+ static const char *pci_variant[] = {
+ "PCI", "PCI-X", "PCI-X ECC", "PCI-X 266", "PCI Express"
+ };
+
+ int i;
+ char buf[80];
+
+ if (is_pcie(adap))
+ snprintf(buf, sizeof(buf), "%s x%d",
+ pci_variant[adap->params.pci.variant],
+ adap->params.pci.width);
+ else
+ snprintf(buf, sizeof(buf), "%s %dMHz/%d-bit",
+ pci_variant[adap->params.pci.variant],
+ adap->params.pci.speed, adap->params.pci.width);
+
+ for_each_port(adap, i) {
+ const struct port_info *pi = &adap->port[i];
+
+ if (!test_bit(i, &adap->registered_device_map))
+ continue;
+ printk(KERN_INFO "%s: %s %s RNIC (rev %d) %s%s\n",
+ pi->dev->name, ai->desc, pi->port_type->desc,
+ adap->params.rev, buf,
+ (adap->flags & USING_MSIX) ? " MSI-X" :
+ (adap->flags & USING_MSI) ? " MSI" : "");
+ if (adap->name == pi->dev->name && adap->params.vpd.mclk)
+ printk(KERN_INFO "%s: %uMB CM, %uMB PMTX, %uMB PMRX\n",
+ adap->name, t3_mc7_size(&adap->cm) >> 20,
+ t3_mc7_size(&adap->pmtx) >> 20,
+ t3_mc7_size(&adap->pmrx) >> 20);
+ }
+}
+
+static int __devinit init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int version_printed;
+
+ int i, err, pci_using_dac = 0;
+ unsigned long mmio_start, mmio_len;
+ const struct adapter_info *ai;
+ struct adapter *adapter = NULL;
+ struct port_info *pi;
+
+ if (!version_printed) {
+ printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
+ ++version_printed;
+ }
+
+ if (!cxgb3_wq) {
+ cxgb3_wq = create_singlethread_workqueue(DRV_NAME);
+ if (!cxgb3_wq) {
+ printk(KERN_ERR PFX "cannot initialize work queue\n");
+ return -ENOMEM;
+ }
+ }
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ CH_ERR("%s: cannot enable PCI device\n", pci_name(pdev));
+ return err;
+ }
+
+ /*
+ * Can't use pci_request_regions() here because some kernels want to
+ * request the MSI-X BAR in pci_enable_msix. Also no need to request
+ * the doorbell BAR if we are not doing user-space RDMA.
+ * So only request BAR0.
+ */
+ err = pci_request_region(pdev, 0, DRV_NAME);
+ if (err) {
+ /*
+ * Some other driver may have already claimed the device.
+ * Report the event but do not disable the device.
+ */
+ printk(KERN_INFO "%s: cannot obtain PCI resources\n",
+ pci_name(pdev));
+ return err;
+ }
+
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ pci_using_dac = 1;
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (err) {
+ CH_ERR("%s: unable to obtain 64-bit DMA for "
+ "coherent allocations\n", pci_name(pdev));
+ goto out_release_regions;
+ }
+ } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) {
+ CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev));
+ goto out_release_regions;
+ }
+
+ pci_set_master(pdev);
+
+ mmio_start = pci_resource_start(pdev, 0);
+ mmio_len = pci_resource_len(pdev, 0);
+ ai = t3_get_adapter_info(ent->driver_data);
+
+ for (i = 0; i < ai->nports; ++i) {
+ struct net_device *netdev;
+
+ netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter));
+ if (!netdev) {
+ err = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ if (!adapter) {
+ adapter = netdev->priv;
+
+ adapter->pdev = pdev;
+ adapter->port[0].dev = netdev; // so we don't leak it
+
+ adapter->regs = ioremap_nocache(mmio_start, mmio_len);
+ if (!adapter->regs) {
+ CH_ERR("%s: cannot map device registers\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ adapter->name = pci_name(pdev);
+ adapter->msg_enable = dflt_msg_enable;
+ adapter->mmio_len = mmio_len;
+ INIT_LIST_HEAD(&adapter->adapter_list);
+ mutex_init(&adapter->mdio_lock);
+ spin_lock_init(&adapter->work_lock);
+ spin_lock_init(&adapter->stats_lock);
+
+ INIT_WORK(&adapter->ext_intr_handler_task,
+ ext_intr_task, adapter);
+ INIT_WORK(&adapter->adap_check_task, t3_adap_check_task,
+ adapter);
+
+ pci_set_drvdata(pdev, netdev);
+ }
+
+ SET_MODULE_OWNER(netdev);
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pi = &adapter->port[i];
+ pi->dev = netdev;
+ pi->rx_csum_offload = 1;
+ pi->nqsets = 1;
+ pi->first_qset = i;
+ pi->activity = 0;
+ netif_carrier_off(netdev);
+ netdev->irq = pdev->irq;
+ netdev->if_port = i;
+ netdev->mem_start = mmio_start;
+ netdev->mem_end = mmio_start + mmio_len - 1;
+ netdev->priv = adapter;
+ netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
+ netdev->features |= NETIF_F_LLTX;
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ netdev->vlan_rx_register = vlan_rx_register;
+ netdev->vlan_rx_kill_vid = vlan_rx_kill_vid;
+
+ netdev->open = cxgb_open;
+ netdev->stop = cxgb_close;
+ netdev->hard_start_xmit = t3_eth_xmit;
+ netdev->get_stats = cxgb_get_stats;
+ netdev->set_multicast_list = cxgb_set_rxmode;
+ netdev->do_ioctl = cxgb_ioctl;
+ netdev->change_mtu = cxgb_change_mtu;
+ netdev->set_mac_address = cxgb_set_mac_addr;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = cxgb_netpoll;
+#endif
+ netdev->weight = 64;
+
+ SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops);
+ }
+
+ if (t3_prep_adapter(adapter, ai, 1) < 0) {
+ err = -ENODEV;
+ goto out_free_dev;
+ }
+
+ /*
+ * The card is now ready to go. If any errors occur during device
+ * registration we do not fail the whole card but rather proceed only
+ * with the ports we manage to register successfully. However we must
+ * register at least one net device.
+ */
+ for_each_port(adapter, i) {
+ err = register_netdev(adapter->port[i].dev);
+ if (err)
+ dev_warn(&pdev->dev,
+ "cannot register net device %s, skipping\n",
+ adapter->port[i].dev->name);
+ else {
+ /*
+ * Change the name we use for messages to the name of
+ * the first successfully registered interface.
+ */
+ if (!adapter->registered_device_map)
+ adapter->name = adapter->port[i].dev->name;
+
+ __set_bit(i, &adapter->registered_device_map);
+ }
+ }
+ if (!adapter->registered_device_map) {
+ dev_err(&pdev->dev, "could not register any net devices\n");
+ goto out_free_dev;
+ }
+
+ /* Driver's ready. Reflect it on LEDs */
+ t3_led_ready(adapter);
+
+ if (is_offload(adapter)) {
+ __set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map);
+ cxgb3_adapter_ofld(adapter);
+ }
+
+ /* See what interrupts we'll be using */
+ if (msi > 1 && cxgb_enable_msix(adapter) == 0)
+ adapter->flags |= USING_MSIX;
+ else if (msi > 0 && pci_enable_msi(pdev) == 0)
+ adapter->flags |= USING_MSI;
+
+ err = sysfs_create_group(&adapter->port[0].dev->class_dev.kobj,
+ &cxgb3_attr_group);
+
+ print_port_info(adapter, ai);
+ return 0;
+
+out_free_dev:
+ if (adapter) {
+ if (adapter->regs)
+ iounmap(adapter->regs);
+ for (i = ai->nports - 1; i >= 0; --i)
+ if (adapter->port[i].dev)
+ free_netdev(adapter->port[i].dev);
+ }
+out_release_regions:
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void __devexit remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (dev) {
+ int i;
+ struct adapter *adapter = dev->priv;
+ void __iomem *regs = adapter->regs;
+
+ t3_sge_stop(adapter);
+ sysfs_remove_group(&adapter->port[0].dev->class_dev.kobj,
+ &cxgb3_attr_group);
+
+ for_each_port(adapter, i)
+ if (test_bit(i, &adapter->registered_device_map))
+ unregister_netdev(adapter->port[i].dev);
+
+ if (is_offload(adapter)) {
+ cxgb3_adapter_unofld(adapter);
+ if (test_bit(OFFLOAD_DEVMAP_BIT,
+ &adapter->open_device_map))
+ offload_close(&adapter->tdev);
+ }
+
+ t3_free_sge_resources(adapter);
+ cxgb_disable_msi(adapter);
+
+ for (i = 0; i < ARRAY_SIZE(adapter->dummy_netdev); i++)
+ if (adapter->dummy_netdev[i]) {
+ free_netdev(adapter->dummy_netdev[i]);
+ adapter->dummy_netdev[i] = NULL;
+ }
+
+ for (i = adapter->params.nports - 1; i >= 0; i--)
+ if (adapter->port[i].dev)
+ free_netdev(adapter->port[i].dev);
+
+ iounmap(regs);
+ pci_release_region(pdev, 0);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+static struct pci_driver driver = {
+ .name = DRV_NAME,
+ .id_table = cxgb3_pci_tbl,
+ .probe = init_one,
+ .remove = __devexit_p(remove_one),
+};
+
+static int __init cxgb3_init_module(void)
+{
+ int ret;
+
+ cxgb3_offload_init();
+
+ ret = pci_register_driver(&driver);
+ return ret;
+}
+
+static void __exit cxgb3_cleanup_module(void)
+{
+ pci_unregister_driver(&driver);
+ if (cxgb3_wq)
+ destroy_workqueue(cxgb3_wq);
+}
+
+module_init(cxgb3_init_module);
+module_exit(cxgb3_cleanup_module);
O
> + * If we have multiple receive queues per port serviced by NAPI we need one
> + * netdevice per queue as NAPI operates on netdevices. We already have one
> + * netdevice, namely the one associated with the interface, so we use dummy
> + * ones for any additional queues. Note that these netdevices exist purely
> + * so that NAPI has something to work with, they do not represent network
> + * ports and are not registered.
> + */
> +static int init_dummy_netdevs(struct adapter *adap)
> +{
> + int i, j, dummy_idx = 0;
> + struct net_device *nd;
> +
> + for_each_port(adap, i) {
> + const struct port_info *pi = &adap->port[i];
> +
> + for (j = 0; j < pi->nqsets - 1; j++) {
> + if (!adap->dummy_netdev[dummy_idx]) {
> + nd = alloc_netdev(0, "", ether_setup);
> + if (!nd)
> + goto free_all;
> +
> + nd->priv = adap;
> + nd->weight = 64;
> + set_bit(__LINK_STATE_START, &nd->state);
> + adap->dummy_netdev[dummy_idx] = nd;
> + }
> + strcpy(adap->dummy_netdev[dummy_idx]->name,
> + pi->dev->name);
> + dummy_idx++;
> + }
> + }
> + return 0;
> +
> +free_all:
> + while (--dummy_idx >= 0) {
> + free_netdev(adap->dummy_netdev[dummy_idx]);
> + adap->dummy_netdev[dummy_idx] = NULL;
> + }
> + return -ENOMEM;
> +}
I understand this, but it seems more trouble than it is worth
and adds longterm maintance burden to NAPI and receive management code.
You would be better off doing your own scheduling in a tasklet.
> + case SIOCCHIOCTL:
> + return cxgb_extension_ioctl(dev, req->ifr_data);
Adding a chelsio specific ioctl value isn't going to get accepted.
You need to use SIOCDEVPRIVATE, and figure out how to do 32bit/64bit
ioctl compatibility for it.
> +#ifdef CONFIG_NET_POLL_CONTROLLER
> +static void cxgb_netpoll(struct net_device *dev)
> +{
> + unsigned long flags;
> + struct adapter *adapter = dev->priv;
> + struct sge_qset *qs = dev2qset(dev);
> +
> + local_irq_save(flags);
> + t3_intr_handler(adapter, qs->rspq.polling) (adapter->pdev->irq,
> + adapter);
> + local_irq_restore(flags);
> +}
> +#endif
IRQ's are always disabled when netpoll is called.
> + for (i = 0; i < ai->nports; ++i) {
> + struct net_device *netdev;
> +
> + netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter));
> + if (!netdev) {
> + err = -ENOMEM;
> + goto out_free_dev;
> + }
> +
> + if (!adapter) {
> + adapter = netdev->priv;
> +
> + adapter->pdev = pdev;
> + adapter->port[0].dev = netdev; // so we don't leak it
> +
> + adapter->regs = ioremap_nocache(mmio_start, mmio_len);
> + if (!adapter->regs) {
> + CH_ERR("%s: cannot map device registers\n",
> + pci_name(pdev));
> + err = -ENOMEM;
> + goto out_free_dev;
> + }
> +
> + adapter->name = pci_name(pdev);
> + adapter->msg_enable = dflt_msg_enable;
> + adapter->mmio_len = mmio_len;
> + INIT_LIST_HEAD(&adapter->adapter_list);
> + mutex_init(&adapter->mdio_lock);
> + spin_lock_init(&adapter->work_lock);
> + spin_lock_init(&adapter->stats_lock);
> +
> + INIT_WORK(&adapter->ext_intr_handler_task,
> + ext_intr_task, adapter);
> + INIT_WORK(&adapter->adap_check_task, t3_adap_check_task,
> + adapter);
> +
> + pci_set_drvdata(pdev, netdev);
> + }
>
It looks like you are repeating the same method of doing multi-port that you
did on cxgb2. It was wrong then, and it is wrong now:
DON'T
use if_port to distinguish port. if_port is legacy field see IF_PORT_XXX
allocate adapter as part of 1st interface
set dev->priv differently on each port
don't use array in adapter structure for each port
DO
allocate adapter separately
use netdev_priv() for per port data
use port->adapter for adapter access
--
Stephen Hemminger <[email protected]>
Stephen,
Thanks for the review. Please see my replies inline.
Stephen Hemminger wrote:
> O
>
>> + * If we have multiple receive queues per port serviced by NAPI we need one
>> + * netdevice per queue as NAPI operates on netdevices. We already have one
>> + * netdevice, namely the one associated with the interface, so we use dummy
>> + * ones for any additional queues. Note that these netdevices exist purely
>> + * so that NAPI has something to work with, they do not represent network
>> + * ports and are not registered.
>> + */
>> +static int init_dummy_netdevs(struct adapter *adap)
>> +{
>> + int i, j, dummy_idx = 0;
>> + struct net_device *nd;
>> +
>> + for_each_port(adap, i) {
>> + const struct port_info *pi = &adap->port[i];
>> +
>> + for (j = 0; j < pi->nqsets - 1; j++) {
>> + if (!adap->dummy_netdev[dummy_idx]) {
>> + nd = alloc_netdev(0, "", ether_setup);
>> + if (!nd)
>> + goto free_all;
>> +
>> + nd->priv = adap;
>> + nd->weight = 64;
>> + set_bit(__LINK_STATE_START, &nd->state);
>> + adap->dummy_netdev[dummy_idx] = nd;
>> + }
>> + strcpy(adap->dummy_netdev[dummy_idx]->name,
>> + pi->dev->name);
>> + dummy_idx++;
>> + }
>> + }
>> + return 0;
>> +
>> +free_all:
>> + while (--dummy_idx >= 0) {
>> + free_netdev(adap->dummy_netdev[dummy_idx]);
>> + adap->dummy_netdev[dummy_idx] = NULL;
>> + }
>> + return -ENOMEM;
>> +}
>>
>
>
> I understand this, but it seems more trouble than it is worth
> and adds longterm maintance burden to NAPI and receive management code.
>
> You would be better off doing your own scheduling in a tasklet.
>
>
This code is directly inspired from the backlog_dev mechanism in
net/core/dev.c.
NAPI provides fairness between adapters. Using our own scheduling would
conflict with this.
>
>
>> + case SIOCCHIOCTL:
>> + return cxgb_extension_ioctl(dev, req->ifr_data);
>>
>
>
> Adding a chelsio specific ioctl value isn't going to get accepted.
> You need to use SIOCDEVPRIVATE, and figure out how to do 32bit/64bit
> ioctl compatibility for it.
>
SIOCCHIOCTL is defined as SIOCDEVPRIVATE in cxgb3_ioctl.h.
>
>> +#ifdef CONFIG_NET_POLL_CONTROLLER
>> +static void cxgb_netpoll(struct net_device *dev)
>> +{
>> + unsigned long flags;
>> + struct adapter *adapter = dev->priv;
>> + struct sge_qset *qs = dev2qset(dev);
>> +
>> + local_irq_save(flags);
>> + t3_intr_handler(adapter, qs->rspq.polling) (adapter->pdev->irq,
>> + adapter);
>> + local_irq_restore(flags);
>> +}
>> +#endif
>>
>
> IRQ's are always disabled when netpoll is called.
>
Okay, will fix.
>
>> + for (i = 0; i < ai->nports; ++i) {
>> + struct net_device *netdev;
>> +
>> + netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter));
>> + if (!netdev) {
>> + err = -ENOMEM;
>> + goto out_free_dev;
>> + }
>> +
>> + if (!adapter) {
>> + adapter = netdev->priv;
>> +
>> + adapter->pdev = pdev;
>> + adapter->port[0].dev = netdev; // so we don't leak it
>> +
>> + adapter->regs = ioremap_nocache(mmio_start, mmio_len);
>> + if (!adapter->regs) {
>> + CH_ERR("%s: cannot map device registers\n",
>> + pci_name(pdev));
>> + err = -ENOMEM;
>> + goto out_free_dev;
>> + }
>> +
>> + adapter->name = pci_name(pdev);
>> + adapter->msg_enable = dflt_msg_enable;
>> + adapter->mmio_len = mmio_len;
>> + INIT_LIST_HEAD(&adapter->adapter_list);
>> + mutex_init(&adapter->mdio_lock);
>> + spin_lock_init(&adapter->work_lock);
>> + spin_lock_init(&adapter->stats_lock);
>> +
>> + INIT_WORK(&adapter->ext_intr_handler_task,
>> + ext_intr_task, adapter);
>> + INIT_WORK(&adapter->adap_check_task, t3_adap_check_task,
>> + adapter);
>> +
>> + pci_set_drvdata(pdev, netdev);
>> + }
>>
>>
>
> It looks like you are repeating the same method of doing multi-port that you
> did on cxgb2. It was wrong then, and it is wrong now:
>
> DON'T
> use if_port to distinguish port. if_port is legacy field see IF_PORT_XXX
> allocate adapter as part of 1st interface
> set dev->priv differently on each port
> don't use array in adapter structure for each port
> DO
> allocate adapter separately
> use netdev_priv() for per port data
> use port->adapter for adapter access
>
We're fixing it.
Cheers,
Divy