[1.] PROBLEM: 2.6.19 + highmem = BUG at do_wp_page
[2.] Without HIGHMEM 2.6.19 boots OK.
But I could have some use for that unused 103MB.
Bugging seems to start near e1000 initialization
(ADDRCONF(NETDEV_CHANGE))
(means e1000 may or may not be causing this)
[3.] e1000 SMP highmem
[4.] Linux version 2.6.19 ([email protected]) (gcc version 3.4.6) #1 SMP Sat Dec 2 19:23:17 EET 2006
[5.] 2.6.19 without HIGHMEM works
[7.] A small shell script or example program which triggers the
problem (if possible)
[8.] Environment
[8.1.]
Gnu C 4.0.3
Gnu make 3.81
binutils 2.17.50.0.6-3
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre9
e2fsprogs 1.39
jfsutils 1.1.7
reiserfsprogs 3.6.19
xfsprogs 2.8.11
quota-tools 3.12.
PPP 2.4.4
Linux C Library 2.4.90
Dynamic linker (ldd) 2.4.90
Procps 3.2.6
Net-tools 1.60
Kbd 1.12
Sh-utils 5.97
udev 095
Modules Loaded xt_CLASSIFY xt_CONNMARK ipt_connlimit ipt_TARPIT xt_length xt_multiport ip_set_iphash ip_set_nethash ip_set_portmap ipt_REJECT ip6t_LOG xt_limit ipt_LOG tcp_highspeed tcp_htcp tcp_hybla tcp_scalable tcp_vegas tcp_westwood ipt_hashlimit ip_set sch_netem sch_hfsc ip6table_mangle sch_htb iptable_mangle sch_sfq cls_fw cls_u32 cls_route iptable_nat sch_ingress sch_red ip_nat sch_tbf ipt_owner sch_teql xt_state sch_prio ip_conntrack sch_gred cls_rsvp cls_rsvp6 cls_tcindex sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables iptable_filter i2c_algo_bit ip_tables i810 lp usb_storage parport_pc parport i2c_dev eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm e1000 iTCO_wdt ehci_hcd snd_timer snd ohci1394 ieee1394 uhci_hcd i2c_i801 pcspkr i2c_core soundcore snd_page_alloc
[8.2.]
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) D CPU 2.80GHz
stepping : 7
cpu MHz : 2797.360
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr lahf_lm
bogomips : 5597.41
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) D CPU 2.80GHz
stepping : 7
cpu MHz : 2797.360
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr lahf_lm
bogomips : 5593.70
[8.3.]
xt_CLASSIFY 2816 5 - Live 0xf8caf000
xt_CONNMARK 3200 3 - Live 0xf8cad000
ipt_connlimit 4096 8 - Live 0xf8def000
ipt_TARPIT 4736 3 - Live 0xf8cf5000
xt_length 2944 4 - Live 0xf8ce6000
xt_multiport 4480 4 - Live 0xf8cee000
ip_set_iphash 8452 3 - Live 0xf8d01000
ip_set_nethash 9732 6 - Live 0xf8cf8000
ip_set_portmap 5632 1 - Live 0xf8ce8000
ipt_REJECT 4736 8 - Live 0xf8cf2000
ip6t_LOG 8064 2 - Live 0xf8ce3000
xt_limit 3456 8 - Live 0xf8cff000
ipt_LOG 7552 6 - Live 0xf8d0f000
tcp_highspeed 4352 0 - Live 0xf8d0c000
tcp_htcp 5120 0 - Live 0xf8d09000
tcp_hybla 3968 0 - Live 0xf8cc2000
tcp_scalable 3072 0 - Live 0xf8cc0000
tcp_vegas 4480 0 - Live 0xf8cbd000
tcp_westwood 3968 0 - Live 0xf8ca2000
ipt_hashlimit 8712 19 - Live 0xf8ca9000
ip_set 20252 6 ip_set_iphash,ip_set_nethash,ip_set_portmap, Live 0xf8c9c000
sch_netem 9472 0 - Live 0xf8c0c000
sch_hfsc 20224 0 - Live 0xf8cc5000
ip6table_mangle 3328 0 - Live 0xf8bff000
sch_htb 16896 1 - Live 0xf8ccb000
iptable_mangle 3456 1 - Live 0xf8bce000
sch_sfq 6528 8 - Live 0xf8bfc000
cls_fw 5504 0 - Live 0xf8bf9000
cls_u32 8324 7 - Live 0xf8bf5000
cls_route 7296 0 - Live 0xf8bf2000
iptable_nat 7428 0 - Live 0xf8bef000
sch_ingress 5124 1 - Live 0xf8bcb000
sch_red 7040 0 - Live 0xf8bc8000
ip_nat 16172 1 iptable_nat, Live 0xf8bc3000
sch_tbf 6656 0 - Live 0xf8bc0000
ipt_owner 2944 138 - Live 0xf8bbe000
sch_teql 6400 0 - Live 0xf8bbb000
xt_state 3072 122 - Live 0xf8b97000
sch_prio 5888 0 - Live 0xf8bb8000
ip_conntrack 43960 5 xt_CONNMARK,ipt_connlimit,iptable_nat,ip_nat,xt_state, Live 0xf8bac000
sch_gred 8960 0 - Live 0xf8ba8000
cls_rsvp 7040 0 - Live 0xf8bdd000
cls_rsvp6 7168 0 - Live 0xf8bd3000
cls_tcindex 7552 0 - Live 0xf8bd0000
sch_cbq 18048 0 - Live 0xf8bd7000
sch_dsmark 6784 0 - Live 0xf8b94000
ip6table_filter 3328 1 - Live 0xf8b92000
intelfb 35876 0 - Live 0xf8c02000
ip6_tables 13812 3 ip6t_LOG,ip6table_mangle,ip6table_filter, Live 0xf8b85000
iptable_filter 3456 1 - Live 0xf8b3f000
i2c_algo_bit 8712 1 intelfb, Live 0xf8b81000
ip_tables 12788 3 iptable_mangle,iptable_nat,iptable_filter, Live 0xf8b7c000
i810 20224 0 - Live 0xf8b76000
lp 11560 0 - Live 0xf8b72000
usb_storage 86720 0 - Live 0xf8b5b000
parport_pc 27076 1 - Live 0xf8b8a000
parport 33736 2 lp,parport_pc, Live 0xf8b51000
i2c_dev 7172 0 - Live 0xf8b4b000
eeprom 6800 0 - Live 0xf8b3c000
ohci_hcd 20996 0 - Live 0xf8b44000
binfmt_misc 10376 1 - Live 0xf8b38000
loop 57228 4 - Live 0xf8b99000
dm_mod 57112 0 - Live 0xf8c11000
video 17540 0 - Live 0xf8b32000
button 6544 0 - Live 0xf8b2f000
battery 9860 0 - Live 0xf8b2b000
asus_acpi 16792 0 - Live 0xf8b25000
ac 5124 0 - Live 0xf8b41000
tcp_cubic 6416 0 - Live 0xf8b4e000
irlan 26640 0 - Live 0xf8afc000
irda 125624 1 irlan, Live 0xf8d23000
crc_ccitt 3072 1 irda, Live 0xf8979000
8139too 24576 0 - Live 0xf8af5000
mii 6016 1 8139too, Live 0xf8aed000
snd_hda_intel 18328 0 - Live 0xf8ae7000
snd_hda_codec 170928 1 snd_hda_intel, Live 0xf8abc000
snd_seq_dummy 4100 0 - Live 0xf8aa7000
snd_seq_oss 34048 0 - Live 0xf8a7c000
snd_seq_midi_event 7680 1 snd_seq_oss, Live 0xf8a3d000
snd_seq 52048 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live 0xf8a6e000
snd_seq_device 7820 3 snd_seq_dummy,snd_seq_oss,snd_seq, Live 0xf8a30000
snd_pcm_oss 45472 0 - Live 0xf8a61000
snd_mixer_oss 16768 1 snd_pcm_oss, Live 0xf8a86000
snd_pcm 77316 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8a1c000
e1000 126528 0 - Live 0xf8b05000
iTCO_wdt 10404 0 - Live 0xf897b000
ehci_hcd 31880 0 - Live 0xf8a34000
snd_timer 22020 2 snd_seq,snd_pcm, Live 0xf8972000
snd 49252 9 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, Live 0xf8964000
ohci1394 33840 0 - Live 0xf895a000
ieee1394 292152 1 ohci1394, Live 0xf8901000
uhci_hcd 23564 0 - Live 0xf8871000
i2c_i801 8076 0 - Live 0xf886e000
pcspkr 3712 0 - Live 0xf8806000
i2c_core 19584 4 i2c_algo_bit,i2c_dev,eeprom,i2c_i801, Live 0xf8868000
soundcore 7520 1 snd, Live 0xf8865000
snd_page_alloc 9352 2 snd_hda_intel,snd_pcm, Live 0xf8861000
[8.4.]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00e1-00e1 : #ENUM hotswap signal register
00f0-00ff : fpu
0378-037a : parport0
03c0-03df : vga+
03f8-03ff : serial
0400-047f : 0000:00:1f.0
0400-0403 : ACPI PM1a_EVT_BLK
0404-0405 : ACPI PM1a_CNT_BLK
0408-040b : ACPI PM_TMR
0410-0415 : ACPI CPU throttle
0420-0420 : ACPI PM2_CNT_BLK
0428-042f : ACPI GPE0_BLK
0460-047f : iTCO_wdt
0500-053f : 0000:00:1f.0
0500-053f : pnp 00:06
0680-06ff : pnp 00:06
0cf8-0cff : PCI conf1
1000-1fff : PCI Bus #02
1000-100f : 0000:02:00.0
1000-1007 : ide2
1008-100f : ide3
1010-1017 : 0000:02:00.0
1018-101f : 0000:02:00.0
1018-101f : ide2
1020-1023 : 0000:02:00.0
1024-1027 : 0000:02:00.0
1026-1026 : ide2
2000-201f : 0000:00:1f.3
2000-201f : i801_smbus
2020-203f : 0000:00:1f.2
2020-203f : ahci
2040-205f : 0000:00:1d.2
2040-205f : uhci_hcd
2060-207f : 0000:00:1d.1
2060-207f : uhci_hcd
2080-209f : 0000:00:1d.0
2080-209f : uhci_hcd
20a0-20bf : 0000:00:1a.1
20a0-20bf : uhci_hcd
20c0-20df : 0000:00:1a.0
20c0-20df : uhci_hcd
20e0-20ff : 0000:00:19.0
20e0-20ff : e1000
2100-210f : 0000:00:03.2
2100-2107 : ide0
2108-210f : ide1
2110-2117 : 0000:00:1f.2
2110-2117 : ahci
2118-211f : 0000:00:1f.2
2118-211f : ahci
2120-2127 : 0000:00:03.3
2120-2127 : serial
2128-212f : 0000:00:03.2
2130-2137 : 0000:00:03.2
2138-213f : 0000:00:02.0
2140-2143 : 0000:00:1f.2
2140-2143 : ahci
2144-2147 : 0000:00:1f.2
2144-2147 : ahci
2148-214b : 0000:00:03.2
214c-214f : 0000:00:03.2
00000000-0008efff : System RAM
0008f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-3e583fff : System RAM
00100000-004af34a : Kernel code
004af34b-005e8693 : Kernel data
3e584000-3e590fff : reserved
3e591000-3e64afff : System RAM
3e64b000-3e6f1fff : ACPI Non-volatile Storage
3e6f2000-3e6f2fff : System RAM
3e6f3000-3e6fefff : ACPI Tables
3e6ff000-3e6fffff : System RAM
3e700000-3effffff : reserved
40000000-4fffffff : 0000:00:02.0
50000000-500fffff : PCI Bus #06
50000000-50003fff : 0000:06:03.0
50004000-500047ff : 0000:06:03.0
50004000-500047ff : ohci1394
50100000-501fffff : PCI Bus #02
50100000-501001ff : 0000:02:00.0
50200000-502fffff : 0000:00:02.0
50300000-5031ffff : 0000:00:19.0
50300000-5031ffff : e1000
50320000-50323fff : 0000:00:1b.0
50320000-50323fff : ICH HD audio
50324000-50324fff : 0000:00:19.0
50324000-50324fff : e1000
50325000-50325fff : 0000:00:03.3
50326000-503267ff : 0000:00:1f.2
50326000-503267ff : ahci
50326800-50326bff : 0000:00:1d.7
50326800-50326bff : ehci_hcd
50326c00-50326fff : 0000:00:1a.7
50326c00-50326fff : ehci_hcd
50327000-503270ff : 0000:00:1f.3
50327100-5032710f : 0000:00:03.0
50400000-504fffff : PCI Bus #01
50500000-505fffff : PCI Bus #03
50600000-506fffff : PCI Bus #04
50700000-507fffff : PCI Bus #05
ffe00000-ffffffff : reserved
[8.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02)
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation 82Q963/Q965 Integrated Graphics Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50200000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at 40000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2138 [size=8]
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller: Intel Corporation 82Q963/Q965 HECI Controller (rev 02)
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50327100 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface: Intel Corporation 82Q963/Q965 PT IDER Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 2130 [size=8]
Region 1: I/O ports at 214c [size=4]
Region 2: I/O ports at 2128 [size=8]
Region 3: I/O ports at 2148 [size=4]
Region 4: I/O ports at 2100 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller: Intel Corporation 82Q963/Q965 KT Controller (rev 02) (prog-if 02 [16550])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 2120 [size=8]
Region 1: Memory at 50325000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller: Intel Corporation 82566DM Gigabit Network Connection (rev 02)
Subsystem: Intel Corporation Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at 50300000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 50324000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 20e0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at 20c0 [size=32]
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 20a0 [size=32]
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at 50326c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
Subsystem: Intel Corporation Unknown device 2008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at 50320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 50400000-504fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 1, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 50100000-501fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 2, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 50500000-505fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 3, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 50600000-506fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 4, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 50700000-507fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 5, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at 2080 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2060 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 2040 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 50326800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 50000000-500fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller (rev 02)
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 SATA controller: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2118 [size=8]
Region 1: I/O ports at 2144 [size=4]
Region 2: I/O ports at 2110 [size=8]
Region 3: I/O ports at 2140 [size=4]
Region 4: I/O ports at 2020 [size=32]
Region 5: Memory at 50326000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/4 Enable-
Address: 00000000 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] #12 [0010]
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 20
Region 0: Memory at 50327000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 2000 [size=32]
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. Unknown device 6101
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 1018 [size=8]
Region 1: I/O ports at 1024 [size=4]
Region 2: I/O ports at 1010 [size=8]
Region 3: I/O ports at 1020 [size=4]
Region 4: I/O ports at 1000 [size=16]
Region 5: Memory at 50100000 (32-bit, non-prefetchable) [size=512]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
Link: Latency L0s <256ns, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Unknown device 4f43
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 50004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 50000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
[8.6.]
[8.7.] I can login haven't tried to run the HIGHMEM kernel for a longer time
[X.] Other notes, patches, fixes, workarounds:
Motherboard is Intel DQ965GF (version CO96510J.86A.5493.2006.1102.1728)
with no additional PCI cards installed.
dmesg diff between 2.6.19 and 2.6.19-highmem
--- dmesg-2.6.19-1024MB 2006-12-05 16:29:42.366053454 +0200
+++ dmesg-2.6.19-1024MB-highmem 2006-12-05 17:54:29.388221988 +0200
@@ -1,4 +1,4 @@
-Linux version 2.6.19 ([email protected]) (gcc version 3.4.6) #1 SMP Sat Dec 2 19:23:17 EET 2006
+Linux version 2.6.19-highmem ([email protected]) (gcc version 3.4.6) #2 SMP Tue Dec 5 17:13:14 EET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
@@ -12,22 +12,24 @@
BIOS-e820: 000000003e6ff000 - 000000003e700000 (usable)
BIOS-e820: 000000003e700000 - 000000003f000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
-Warning only 896MB will be used.
-Use a HIGHMEM enabled kernel.
+103MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe200
-Entering add_active_range(0, 0, 229376) 0 entries of 256 used
+Entering add_active_range(0, 0, 255744) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
+ HighMem 229376 -> 255744
early_node_map[1] active PFN ranges
- 0: 0 -> 229376
-On node 0 totalpages: 229376
+ 0: 0 -> 255744
+On node 0 totalpages: 255744
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
+ HighMem zone: 206 pages used for memmap
+ HighMem zone: 26162 pages, LIFO batch:7
DMI 2.4 present.
ACPI: RSDP (v000 INTEL ) @ 0x000fe020
ACPI: RSDT (v001 INTEL DQ965GF 0x00001575 0x01000013) @ 0x3e6fd038
@@ -58,8 +60,8 @@
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f000000:c0e00000)
-Detected 2797.425 MHz processor.
-Built 1 zonelists. Total pages: 227584
+Detected 2797.363 MHz processor.
+Built 1 zonelists. Total pages: 253746
Kernel command line: ro root=/dev/hdf1 all-generic-ide
IDE generic will claim all unknown PCI IDE storage controllers.
mapped APIC to ffffd000 (fee00000)
@@ -71,16 +73,17 @@
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 902496k/917504k available (3772k kernel code, 14432k reserved, 1252k data, 252k init, 0k highmem)
+Memory: 1006228k/1022976k available (3778k kernel code, 15320k reserved, 1259k data, 256k init, 104704k highmem)
virtual kernel memory layout:
- fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
- vmalloc : 0xf8800000 - 0xfffb5000 ( 119 MB)
+ fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
+ pkmap : 0xff800000 - 0xffc00000 (4096 kB)
+ vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
- .init : 0xc067f000 - 0xc06be000 ( 252 kB)
- .data : 0xc04af34b - 0xc05e8694 (1252 kB)
- .text : 0xc0100000 - 0xc04af34b (3772 kB)
+ .init : 0xc0681000 - 0xc06c1000 ( 256 kB)
+ .data : 0xc04b0aa3 - 0xc05eb734 (1259 kB)
+ .text : 0xc0100000 - 0xc04b0aa3 (3778 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay using timer specific routine.. 5597.40 BogoMIPS (lpj=2798703)
+Calibrating delay using timer specific routine.. 5597.38 BogoMIPS (lpj=2798693)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
@@ -98,13 +101,14 @@
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
+CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
Booting processor 1/1 eip 2000
Initializing CPU#1
-Calibrating delay using timer specific routine.. 5593.69 BogoMIPS (lpj=2796845)
+Calibrating delay using timer specific routine.. 5593.71 BogoMIPS (lpj=2796855)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
@@ -115,13 +119,14 @@
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
+CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
Total of 2 processors activated (11191.09 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
-migration_cost=491
+migration_cost=429
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
@@ -208,9 +213,11 @@
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
+Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[email protected]>
audit: initializing netlink socket (disabled)
-audit(1165328778.619:1): initialized
+audit(1165333893.665:1): initialized
+highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
@@ -312,7 +319,7 @@
hdf: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hdf: cache flushes supported
hdf: hdf1 hdf2 < hdf5 hdf6 hdf7 hdf8 hdf9 >
-hde: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
+hde: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded
@@ -350,10 +357,10 @@
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
-EDAC MC: Ver: 2.0.1 Dec 2 2006
+EDAC MC: Ver: 2.0.1 Dec 5 2006
perfctr/x86.c: CPU 1: cpuid_ebx(1) 0x01020800, cpuid_edx(1) 0xbfebfbff, cpuid_eax(4) 0x04000121, cpuid_maxlev 5, max_cores_per_package 2, SMT_ID 0
perfctr/x86.c: CPU 0: cpuid_ebx(1) 0x00020800, cpuid_edx(1) 0xbfebfbff, cpuid_eax(4) 0x04000121, cpuid_maxlev 5, max_cores_per_package 2, SMT_ID 0
-perfctr: driver 2.6.25, cpu type Intel P4 at 2797425 kHz
+perfctr: driver 2.6.25, cpu type Intel P4 at 2797363 kHz
Netfilter messages via NETLINK v0.30.
TCP bic registered
Initializing XFRM netlink socket
@@ -364,17 +371,18 @@
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
-random: rekey_late entropy_count=31
+random: rekey_late entropy_count=34
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Time: tsc clocksource has been installed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
XFS mounting filesystem hdf1
-Ending clean XFS mount for filesystem: hdf1
+Starting XFS recovery on filesystem: hdf1 (logdev: internal)
+Ending XFS recovery on filesystem: hdf1 (logdev: internal)
VFS: Mounted root (xfs filesystem) readonly.
-Freeing unused kernel memory: 252k freed
-Write protecting the kernel read-only data: 671k
+Freeing unused kernel memory: 256k freed
+Write protecting the kernel read-only data: 672k
security: 3 users, 6 roles, 1124 types, 128 bools, 16 sens, 256 cats
security: 55 classes, 34457 rules
SELinux: Completing initialization.
.....................................
2.6.19-highmem dmesg
Linux version 2.6.19-highmem ([email protected]) (gcc version 3.4.6) #2 SMP Tue Dec 5 17:13:14 EET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003e584000 (usable)
BIOS-e820: 000000003e584000 - 000000003e591000 (reserved)
BIOS-e820: 000000003e591000 - 000000003e64b000 (usable)
BIOS-e820: 000000003e64b000 - 000000003e6f2000 (ACPI NVS)
BIOS-e820: 000000003e6f2000 - 000000003e6f3000 (usable)
BIOS-e820: 000000003e6f3000 - 000000003e6ff000 (ACPI data)
BIOS-e820: 000000003e6ff000 - 000000003e700000 (usable)
BIOS-e820: 000000003e700000 - 000000003f000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
103MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe200
Entering add_active_range(0, 0, 255744) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 255744
early_node_map[1] active PFN ranges
0: 0 -> 255744
On node 0 totalpages: 255744
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 206 pages used for memmap
HighMem zone: 26162 pages, LIFO batch:7
DMI 2.4 present.
ACPI: RSDP (v000 INTEL ) @ 0x000fe020
ACPI: RSDT (v001 INTEL DQ965GF 0x00001575 0x01000013) @ 0x3e6fd038
ACPI: FADT (v001 INTEL DQ965GF 0x00001575 MSFT 0x01000013) @ 0x3e6fc000
ACPI: MADT (v001 INTEL DQ965GF 0x00001575 MSFT 0x01000013) @ 0x3e6f6000
ACPI: WDDT (v001 INTEL DQ965GF 0x00001575 MSFT 0x01000013) @ 0x3e6f5000
ACPI: MCFG (v001 INTEL DQ965GF 0x00001575 MSFT 0x01000013) @ 0x3e6f4000
ACPI: ASF! (v032 INTEL DQ965GF 0x00001575 MSFT 0x01000013) @ 0x3e6f3000
ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x3e64b000
ACPI: DSDT (v001 INTEL DQ965GF 0x00001575 MSFT 0x01000013) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f000000:c0e00000)
Detected 2797.405 MHz processor.
Built 1 zonelists. Total pages: 253746
Kernel command line: ro root=/dev/hdf1 all-generic-ide
IDE generic will claim all unknown PCI IDE storage controllers.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1006228k/1022976k available (3778k kernel code, 15320k reserved, 1259k data, 256k init, 104704k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0681000 - 0xc06c1000 ( 256 kB)
.data : 0xc04b0aa3 - 0xc05eb734 (1259 kB)
.text : 0xc0100000 - 0xc04b0aa3 (3778 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5597.37 BogoMIPS (lpj=2798689)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5593.69 BogoMIPS (lpj=2796846)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000641d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
Total of 2 processors activated (11191.07 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=480
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:06: ioport range 0x500-0x53f has been reserved
pnp: 00:06: ioport range 0x400-0x47f could not be reserved
pnp: 00:06: ioport range 0x680-0x6ff has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: 50400000-504fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 1000-1fff
MEM window: 50100000-501fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: 50500000-505fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: 50600000-506fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: 50700000-507fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: 50000000-500fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
random: extract_entropy called before initializing
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <[email protected]>
audit: initializing netlink socket (disabled)
audit(1165334700.594:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
SELinux: Registering netfilter hooks
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
cpcihp_generic: not configured, disabling.
pciehp: HPC vendor_id 8086 device_id 283f ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0
pciehp: HPC vendor_id 8086 device_id 2841 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1
pciehp: HPC vendor_id 8086 device_id 2843 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.2
pciehp: HPC vendor_id 8086 device_id 2845 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.3
pciehp: HPC vendor_id 8086 device_id 2847 ss_vid 0 ss_did 0
Evaluate _OSC Set fails. Status = 0x0005
Evaluate _OSC Set fails. Status = 0x0005
pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.4
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Getting cpuindex for acpiid 0x3
ACPI: Getting cpuindex for acpiid 0x4
random: create_entropy_store() finished digestsize=32 keysize=32
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 965Q Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 512M @ 0x40000000
[drm] Initialized drm 1.0.1 20051102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 16
0000:00:03.3: ttyS1 at I/O 0x2120 (irq = 16) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Unknown: IDE controller at PCI slot 0000:00:03.2
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 18 (level, low) -> IRQ 18
Unknown: chipset revision 2
Unknown: 100% native mode on irq 18
ide0: BM-DMA at 0x2100-0x2107, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x2108-0x210f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
Unknown: IDE controller at PCI slot 0000:02:00.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
Unknown: chipset revision 177
Unknown: 100% native mode on irq 16
ide2: BM-DMA at 0x1000-0x1007, BIOS settings: hde:DMA, hdf:DMA
ide3: BM-DMA at 0x1008-0x100f, BIOS settings: hdg:DMA, hdh:DMA
Probing IDE interface ide2...
hde: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
hdf: ST3160023A, ATA DISK drive
ide2 at 0x1018-0x101f,0x1026 on irq 16
Probing IDE interface ide3...
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide3...
hdf: max request size: 512KiB
hdf: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hdf: cache flushes supported
hdf: hdf1 hdf2 < hdf5 hdf6 hdf7 hdf8 hdf9 >
hde: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded
stex: Promise SuperTrak EX Driver version: 3.0.0.1
st: Version 20050830, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
ahci 0000:00:1f.2: version 2.0
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xF8804100 ctl 0x0 bmdma 0x0 irq 19
ata2: SATA max UDMA/133 cmd 0xF8804180 ctl 0x0 bmdma 0x0 irq 19
ata3: SATA max UDMA/133 cmd 0xF8804200 ctl 0x0 bmdma 0x0 irq 19
ata4: SATA max UDMA/133 cmd 0xF8804280 ctl 0x0 bmdma 0x0 irq 19
ata5: SATA max UDMA/133 cmd 0xF8804300 ctl 0x0 bmdma 0x0 irq 19
ata6: SATA max UDMA/133 cmd 0xF8804380 ctl 0x0 bmdma 0x0 irq 19
scsi0 : ahci
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : ahci
ata5: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata6: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EDAC MC: Ver: 2.0.1 Dec 5 2006
perfctr/x86.c: CPU 1: cpuid_ebx(1) 0x01020800, cpuid_edx(1) 0xbfebfbff, cpuid_eax(4) 0x04000121, cpuid_maxlev 5, max_cores_per_package 2, SMT_ID 0
perfctr/x86.c: CPU 0: cpuid_ebx(1) 0x00020800, cpuid_edx(1) 0xbfebfbff, cpuid_eax(4) 0x04000121, cpuid_maxlev 5, max_cores_per_package 2, SMT_ID 0
perfctr: driver 2.6.25, cpu type Intel P4 at 2797405 kHz
Netfilter messages via NETLINK v0.30.
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
random: rekey_late entropy_count=31
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Time: tsc clocksource has been installed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
XFS mounting filesystem hdf1
Ending clean XFS mount for filesystem: hdf1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 256k freed
Write protecting the kernel read-only data: 672k
security: 3 users, 6 roles, 1124 types, 128 bools, 16 sens, 256 cats
security: 55 classes, 34457 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hdf1, type xfs), uses xattr
SELinux: initialized (dev vperfctrfs, type vperfctrfs), not configured for labeling
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1165334711.972:2): policy loaded auid=4294967295
audit(1165334711.973:3): avc: granted { load_policy } for pid=1 comm="init" scontext=system_u:system_r:kernel_t:s0-s9:c0.c127 tcontext=system_u:object_r:security_t:s0 tclass=security
audit(1165334711.974:4): avc: denied { transition } for pid=1 comm="init" name="init" dev=hdf1 ino=21030898 scontext=system_u:system_r:kernel_t:s0-s9:c0.c127 tcontext=system_u:system_r:init_t:s0-s15:c0.c255 tclass=process
audit(1165334712.351:5): avc: denied { read write } for pid=483 comm="hostname" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:hostname_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
audit(1165334712.484:6): avc: denied { read write } for pid=486 comm="mount" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:mount_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
audit(1165334714.903:7): avc: denied { search } for pid=873 comm="pam_console_app" name="var" dev=hdf1 ino=4194432 scontext=system_u:system_r:pam_console_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=dir
audit(1165334714.906:8): avc: denied { read } for pid=873 comm="pam_console_app" name="/" dev=tmpfs ino=909 scontext=system_u:system_r:pam_console_t:s0-s15:c0.c255 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
audit(1165334714.907:9): avc: denied { getattr } for pid=873 comm="pam_console_app" name="/" dev=tmpfs ino=909 scontext=system_u:system_r:pam_console_t:s0-s15:c0.c255 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
audit(1165334714.907:10): avc: denied { search } for pid=873 comm="pam_console_app" name="/" dev=tmpfs ino=909 scontext=system_u:system_r:pam_console_t:s0-s15:c0.c255 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0x50326c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0x50326800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x000020c0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020a0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (08-Oct-2006)
iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
input: PC Speaker as /class/input/input0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:19.0 to 64
usb 5-1: new low speed USB device using uhci_hcd and address 2
e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:00:5f:01
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[50004000-500047ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21
usb 5-1: configuration #1 chosen from 1 choice
input: Chicony Saitek Eclipse II Keyboard as /class/input/input1
input: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:1d.0-1
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: Chicony Saitek Eclipse II Keyboard as /class/input/input2
input,hiddev96: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:1d.0-1
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
input: Tempest Habu Mouse as /class/input/input3
input: USB HID v1.00 Mouse [Tempest Habu Mouse] on usb-0000:00:1d.0-2
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001b66bbe]
floppy0: no floppy controllers found
8139too Fast Ethernet driver 0.9.28
NET: Registered protocol family 23
TCP cubic registered
audit(1165334720.988:11): avc: denied { read write } for pid=1631 comm="hwclock" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:hwclock_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
audit(1165334720.989:12): avc: denied { search } for pid=1631 comm="hwclock" name="/" dev=tmpfs ino=909 scontext=system_u:system_r:hwclock_t:s0-s15:c0.c255 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: [email protected]
audit(1165334722.615:13): avc: denied { read write } for pid=1709 comm="restorecon" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:restorecon_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
loop: loaded (max 8 devices)
audit(1165334724.328:22): avc: denied { read write } for pid=1759 comm="fsck" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:fsadm_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
audit(1165334724.407:23): avc: denied { read write } for pid=1759 comm="fsck" name="control" dev=tmpfs ino=6148 scontext=system_u:system_r:fsadm_t:s0-s15:c0.c255 tcontext=system_u:object_r:lvm_control_t:s0 tclass=chr_file
audit(1165334724.407:24): avc: denied { ioctl } for pid=1759 comm="fsck" name="control" dev=tmpfs ino=6148 scontext=system_u:system_r:fsadm_t:s0-s15:c0.c255 tcontext=system_u:object_r:lvm_control_t:s0 tclass=chr_file
XFS mounting filesystem hdf7
Ending clean XFS mount for filesystem: hdf7
SELinux: initialized (dev hdf7, type xfs), uses xattr
XFS mounting filesystem hdf8
Ending clean XFS mount for filesystem: hdf8
SELinux: initialized (dev hdf8, type xfs), uses xattr
XFS mounting filesystem hdf9
Ending clean XFS mount for filesystem: hdf9
SELinux: initialized (dev hdf9, type xfs), uses xattr
audit(1165334725.746:25): avc: denied { read write } for pid=1785 comm="quotaon" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:quota_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
audit(1165334727.291:26): avc: denied { read write } for pid=1832 comm="pam_console_app" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:pam_console_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
audit(1165334727.647:27): avc: denied { read write } for pid=1842 comm="restorecon" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:restorecon_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
audit(1165334727.649:28): avc: denied { read } for pid=1842 comm="restorecon" name="tmp" dev=hdf1 ino=143208 scontext=system_u:system_r:restorecon_t:s0-s15:c0.c255 tcontext=system_u:object_r:tmp_t:s0 tclass=lnk_file
audit(1165334727.814:29): avc: denied { read write } for pid=1843 comm="swapon" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:fsadm_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
audit(1165334728.259:30): avc: denied { getattr } for pid=1845 comm="mkswap" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:fsadm_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
audit(1165334728.259:31): avc: denied { ioctl } for pid=1845 comm="mkswap" name="console" dev=hdf1 ino=58720608 scontext=system_u:system_r:fsadm_t:s0-s15:c0.c255 tcontext=root:object_r:file_t:s0 tclass=chr_file
Adding 1004016k swap on /dev/loop7. Priority:5 extents:1 across:1004016k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
audit(1165334731.364:32): avc: denied { search } for pid=2006 comm="ifconfig" name="/" dev=hdf7 ino=128 scontext=system_u:system_r:ifconfig_t:s0-s15:c0.c255 tcontext=system_u:object_r:var_t:s0 tclass=dir
audit(1165334731.364:33): avc: denied { search } for pid=2006 comm="ifconfig" name="run" dev=hdf7 ino=12691733 scontext=system_u:system_r:ifconfig_t:s0-s15:c0.c255 tcontext=system_u:object_r:var_run_t:s0 tclass=dir
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
audit(1165334734.345:34): avc: denied { search } for pid=2186 comm="irqbalance" name="/" dev=tmpfs ino=909 scontext=system_u:system_r:irqbalance_t:s0-s15:c0.c255 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
e1000: eth0: e1000_reset: Hardware Error
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ip_tables: (C) 2000-2006 Netfilter Core Team
lp0: using parport0 (interrupt-driven).
lp0: console ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
ip_conntrack version 2.4 (7992 buckets, 63936 max) - 232 bytes per conntrack
u32 classifier
Performance counters on
OLD policer on
netem: version 1.2
TCP westwood registered
TCP vegas registered
TCP scalable registered
TCP hybla registered
TCP htcp registered
TCP highspeed registered
ADDRCONF(NETDEV_UP): eth0: link is not ready
audit(1165334737.150:39): avc: denied { search } for pid=2608 comm="mii-tool" name="/" dev=hdf7 ino=128 scontext=system_u:system_r:ifconfig_t:s0-s15:c0.c255 tcontext=system_u:object_r:var_t:s0 tclass=dir
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
BUG: unable to handle kernel paging request at virtual address fffb9dc0
printing eip:
c01591b2
*pde = 00003067
*pte = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: ipt_REJECT ip6t_LOG tcp_highspeed tcp_htcp tcp_hybla xt_limit tcp_scalable tcp_vegas ipt_LOG tcp_westwood sch_netem ipt_hashlimit sch_hfsc sch_htb ip6table_mangle sch_sfq cls_fw iptable_mangle cls_u32 cls_route sch_ingress sch_red sch_tbf iptable_nat sch_teql ip_nat sch_prio ipt_owner sch_gred cls_rsvp xt_state cls_rsvp6 cls_tcindex ip_conntrack sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables i2c_algo_bit i810 iptable_filter lp ip_tables parport_pc parport i2c_dev usb_storage eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss pcspkr i2c_i801 i2c_core iTCO_wdt ohci1394 e1000 snd_pcm ieee1394 uhci_hcd snd_timer ehci_hcd snd soundcore snd_page_alloc
CPU: 0
EIP: 0060:[<c01591b2>] Not tainted VLI
EFLAGS: 00010206 (2.6.19-highmem #2)
EIP is at do_wp_page+0xe5/0x388
eax: fffb8000 ebx: fffb9000 ecx: 00000090 edx: 00000000
esi: fffb9dc0 edi: fffb8dc0 ebp: f6f89f24 esp: f6f89ef0
ds: 007b es: 007b ss: 0068
Process udevd (pid: 2672, ti=f6f88000 task=c1975550 task.ti=f6f88000)
Stack: fffb8000 00000000 00000000 00000000 00000002 c1766f20 c17baf60 800af3b8
f74a04c4 f740f040 3dd7b045 f778c800 f6f2b2bc f6f89f5c c015a385 f6f2b2bc
f778c800 c16de56c 3dd7b045 c16de56c 3dd7b045 800af3b8 f74a04c4 f740f040
Call Trace:
[<c015a385>] __handle_mm_fault+0x1e3/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<b7dc1cc1>] 0xb7dc1cc1
=======================
Code: 01 00 00 ba 03 00 00 00 8b 45 e4 e8 31 d7 fb ff ba 04 00 00 00 89 c3 8b 45 e0 e8 22 d7 fb ff 89 de b9 00 04 00 00 89 45 cc 89 c7 <f3> a5 ba 03 00 00 00 89 d8 e8 91 d7 fb ff ba 04 00 00 00 8b 45
EIP: [<c01591b2>] do_wp_page+0xe5/0x388 SS:ESP 0068:f6f89ef0
<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():1, irqs_disabled():1
[<c0103b64>] dump_trace+0x215/0x21a
[<c0103c0c>] show_trace_log_lvl+0x1a/0x30
[<c0103c34>] show_trace+0x12/0x14
[<c0103d31>] dump_stack+0x19/0x1b
[<c011efff>] __might_sleep+0xa3/0xab
[<c0138175>] down_read+0x15/0x29
[<c012ed57>] blocking_notifier_call_chain+0x1c/0x42
[<c0122bf9>] profile_task_exit+0x11/0x13
[<c01244da>] do_exit+0x1c/0x43b
[<c0104243>] do_trap+0x0/0xbd
[<c01159e6>] do_page_fault+0x34b/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<c01591b2>] do_wp_page+0xe5/0x388
[<c015a385>] __handle_mm_fault+0x1e3/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<b7dc1cc1>] 0xb7dc1cc1
=======================
note: udevd[2672] exited with preempt_count 2
audit(1165334740.754:40): avc: denied { write } for pid=2732 comm="ip" name="dhclient-ip-addr.txt" dev=hdf1 ino=41992565 scontext=system_u:system_r:ifconfig_t:s0-s15:c0.c255 tcontext=system_u:object_r:etc_t:s0 tclass=file
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
BUG: unable to handle kernel paging request at virtual address fffb9e80
printing eip:
c01591b2
*pde = 00003067
*pte = 00000000
Oops: 0000 [#2]
SMP
Modules linked in: ipt_REJECT ip6t_LOG tcp_highspeed tcp_htcp tcp_hybla xt_limit tcp_scalable tcp_vegas ipt_LOG tcp_westwood sch_netem ipt_hashlimit sch_hfsc sch_htb ip6table_mangle sch_sfq cls_fw iptable_mangle cls_u32 cls_route sch_ingress sch_red sch_tbf iptable_nat sch_teql ip_nat sch_prio ipt_owner sch_gred cls_rsvp xt_state cls_rsvp6 cls_tcindex ip_conntrack sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables i2c_algo_bit i810 iptable_filter lp ip_tables parport_pc parport i2c_dev usb_storage eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss pcspkr i2c_i801 i2c_core iTCO_wdt ohci1394 e1000 snd_pcm ieee1394 uhci_hcd snd_timer ehci_hcd snd soundcore snd_page_alloc
CPU: 0
EIP: 0060:[<c01591b2>] Not tainted VLI
EFLAGS: 00010206 (2.6.19-highmem #2)
EIP is at do_wp_page+0xe5/0x388
eax: fffb8000 ebx: fffb9000 ecx: 00000060 edx: 00000000
esi: fffb9e80 edi: fffb8e80 ebp: f6b27f24 esp: f6b27ef0
ds: 007b es: 007b ss: 0068
Process chain-flush (pid: 2816, ti=f6b26000 task=f7405030 task.ti=f6b26000)
Stack: fffb8000 00000000 00000000 00000000 00000002 c17525c0 c17550e0 4144b0c4
f70a41d0 f7d5d040 3aa87045 f6519414 f660412c f6b27f5c c015a385 f660412c
f6519414 c16cc08c 3aa87045 c16cc08c 3aa87045 4144b0c4 f70a41d0 f7d5d040
Call Trace:
[<c015a385>] __handle_mm_fault+0x1e3/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<413a56b9>] 0x413a56b9
=======================
Code: 01 00 00 ba 03 00 00 00 8b 45 e4 e8 31 d7 fb ff ba 04 00 00 00 89 c3 8b 45 e0 e8 22 d7 fb ff 89 de b9 00 04 00 00 89 45 cc 89 c7 <f3> a5 ba 03 00 00 00 89 d8 e8 91 d7 fb ff ba 04 00 00 00 8b 45
EIP: [<c01591b2>] do_wp_page+0xe5/0x388 SS:ESP 0068:f6b27ef0
<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():1, irqs_disabled():1
[<c0103b64>] dump_trace+0x215/0x21a
[<c0103c0c>] show_trace_log_lvl+0x1a/0x30
[<c0103c34>] show_trace+0x12/0x14
[<c0103d31>] dump_stack+0x19/0x1b
[<c011efff>] __might_sleep+0xa3/0xab
[<c0138175>] down_read+0x15/0x29
[<c012ed57>] blocking_notifier_call_chain+0x1c/0x42
[<c0122bf9>] profile_task_exit+0x11/0x13
[<c01244da>] do_exit+0x1c/0x43b
[<c0104243>] do_trap+0x0/0xbd
[<c01159e6>] do_page_fault+0x34b/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<c01591b2>] do_wp_page+0xe5/0x388
[<c015a385>] __handle_mm_fault+0x1e3/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<413a56b9>] 0x413a56b9
=======================
note: chain-flush[2816] exited with preempt_count 2
------------[ cut here ]------------
kernel BUG at arch/i386/mm/highmem.c:42!
invalid opcode: 0000 [#3]
SMP
Modules linked in: ipt_REJECT ip6t_LOG tcp_highspeed tcp_htcp tcp_hybla xt_limit tcp_scalable tcp_vegas ipt_LOG tcp_westwood sch_netem ipt_hashlimit sch_hfsc sch_htb ip6table_mangle sch_sfq cls_fw iptable_mangle cls_u32 cls_route sch_ingress sch_red sch_tbf iptable_nat sch_teql ip_nat sch_prio ipt_owner sch_gred cls_rsvp xt_state cls_rsvp6 cls_tcindex ip_conntrack sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables i2c_algo_bit i810 iptable_filter lp ip_tables parport_pc parport i2c_dev usb_storage eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss pcspkr i2c_i801 i2c_core iTCO_wdt ohci1394 e1000 snd_pcm ieee1394 uhci_hcd snd_timer ehci_hcd snd soundcore snd_page_alloc
CPU: 0
EIP: 0060:[<c0116926>] Not tainted VLI
EFLAGS: 00010206 (2.6.19-highmem #2)
EIP is at kmap_atomic+0x5e/0x89
eax: c0003ee0 ebx: fffb8000 ecx: c1754140 edx: 3a92e163
esi: f76be1d0 edi: f76be1d0 ebp: f659dedc esp: f659ded8
ds: 007b es: 007b ss: 0068
Process chain-flush (pid: 2813, ti=f659c000 task=f7bf1030 task.ti=f659c000)
Stack: c1754140 f659df24 c0159f52 00000001 fffb9000 00000000 00000001 00000000
00000000 00000000 f7b7774c c178ab00 b7efb010 f76be1d0 f770c040 00000002
00000000 f753bb7c f6bb8bec f659df5c c015a348 f6bb8bec f753bb7c 00000001
Call Trace:
[<c0159f52>] do_no_page+0x1cf/0x2cb
[<c015a348>] __handle_mm_fault+0x1a6/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<41015377>] 0x41015377
=======================
Code: ff ff 8b 40 10 8d 14 40 8d 14 90 01 da 8b 1d b0 e5 55 c0 8d 42 43 c1 e2 02 c1 e0 0c 29 c3 a1 b4 dd 6c c0 29 d0 8b 10 85 d2 74 08 <0f> 0b 2a 00 23 d8 4e c0 2b 0d 00 f8 6f c0 c1 f9 05 c1 e1 0c 0b
EIP: [<c0116926>] kmap_atomic+0x5e/0x89 SS:ESP 0068:f659ded8
<6>note: chain-flush[2813] exited with preempt_count 2
------------[ cut here ]------------
kernel BUG at arch/i386/mm/highmem.c:42!
invalid opcode: 0000 [#4]
SMP
Modules linked in: ipt_REJECT ip6t_LOG tcp_highspeed tcp_htcp tcp_hybla xt_limit tcp_scalable tcp_vegas ipt_LOG tcp_westwood sch_netem ipt_hashlimit sch_hfsc sch_htb ip6table_mangle sch_sfq cls_fw iptable_mangle cls_u32 cls_route sch_ingress sch_red sch_tbf iptable_nat sch_teql ip_nat sch_prio ipt_owner sch_gred cls_rsvp xt_state cls_rsvp6 cls_tcindex ip_conntrack sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables i2c_algo_bit i810 iptable_filter lp ip_tables parport_pc parport i2c_dev usb_storage eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss pcspkr i2c_i801 i2c_core iTCO_wdt ohci1394 e1000 snd_pcm ieee1394 uhci_hcd snd_timer ehci_hcd snd soundcore snd_page_alloc
CPU: 0
EIP: 0060:[<c0116926>] Not tainted VLI
EFLAGS: 00010206 (2.6.19-highmem #2)
EIP is at kmap_atomic+0x5e/0x89
eax: c0003ee0 ebx: fffb8000 ecx: c17a2a60 edx: 3a92e163
esi: f64e7e40 edi: c16c9cec ebp: f6b27e98 esp: f6b27e94
ds: 007b es: 007b ss: 0068
Process run (pid: 2817, ti=f6b26000 task=f7405030 task.ti=f6b26000)
Stack: fffb9000 f6b27ed4 c01591a6 00000800 c05e0e00 fffb9000 00000000 00000002
c17a2a60 c1752f80 b7f90918 f70a45c0 f764a3c0 3a97c045 f658cb7c f64e7e40
f6b27f0c c015a385 f64e7e40 f658cb7c c16c9cec 3a97c045 c16c9cec 3a97c045
Call Trace:
[<c01591a6>] do_wp_page+0xd9/0x388
[<c015a385>] __handle_mm_fault+0x1e3/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<c02bbfe6>] __put_user_4+0x12/0x18
DWARF2 unwinder stuck at __put_user_4+0x12/0x18
Leftover inexact backtrace:
[<c0102bbe>] ret_from_fork+0x6/0x1c
=======================
Code: ff ff 8b 40 10 8d 14 40 8d 14 90 01 da 8b 1d b0 e5 55 c0 8d 42 43 c1 e2 02 c1 e0 0c 29 c3 a1 b4 dd 6c c0 29 d0 8b 10 85 d2 74 08 <0f> 0b 2a 00 23 d8 4e c0 2b 0d 00 f8 6f c0 c1 f9 05 c1 e1 0c 0b
EIP: [<c0116926>] kmap_atomic+0x5e/0x89 SS:ESP 0068:f6b27e94
<6>note: run[2817] exited with preempt_count 2
------------[ cut here ]------------
kernel BUG at arch/i386/mm/highmem.c:42!
invalid opcode: 0000 [#5]
SMP
Modules linked in: ipt_REJECT ip6t_LOG tcp_highspeed tcp_htcp tcp_hybla xt_limit tcp_scalable tcp_vegas ipt_LOG tcp_westwood sch_netem ipt_hashlimit sch_hfsc sch_htb ip6table_mangle sch_sfq cls_fw iptable_mangle cls_u32 cls_route sch_ingress sch_red sch_tbf iptable_nat sch_teql ip_nat sch_prio ipt_owner sch_gred cls_rsvp xt_state cls_rsvp6 cls_tcindex ip_conntrack sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables i2c_algo_bit i810 iptable_filter lp ip_tables parport_pc parport i2c_dev usb_storage eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss pcspkr i2c_i801 i2c_core iTCO_wdt ohci1394 e1000 snd_pcm ieee1394 uhci_hcd snd_timer ehci_hcd snd soundcore snd_page_alloc
CPU: 0
EIP: 0060:[<c0116926>] Not tainted VLI
EFLAGS: 00010206 (2.6.19-highmem #2)
EIP is at kmap_atomic+0x5e/0x89
eax: c0003ee0 ebx: fffb8000 ecx: c1752c60 edx: 3a92e163
esi: f64e7e40 edi: c16c9cec ebp: f6f69e98 esp: f6f69e94
ds: 007b es: 007b ss: 0068
Process run (pid: 2818, ti=f6f68000 task=f7405550 task.ti=f6f68000)
Stack: fffb9000 f6f69ed4 c01591a6 00000001 f7405550 f7bb1ac0 00000000 00000002
c1752c60 c1752f80 b7f90918 f74dea58 f764a3c0 3a97c045 f658cb7c f64e7e40
f6f69f0c c015a385 f64e7e40 f658cb7c c16c9cec 3a97c045 c16c9cec 3a97c045
Call Trace:
[<c01591a6>] do_wp_page+0xd9/0x388
[<c015a385>] __handle_mm_fault+0x1e3/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<c02bbfe6>] __put_user_4+0x12/0x18
DWARF2 unwinder stuck at __put_user_4+0x12/0x18
Leftover inexact backtrace:
[<c0102bbe>] ret_from_fork+0x6/0x1c
=======================
Code: ff ff 8b 40 10 8d 14 40 8d 14 90 01 da 8b 1d b0 e5 55 c0 8d 42 43 c1 e2 02 c1 e0 0c 29 c3 a1 b4 dd 6c c0 29 d0 8b 10 85 d2 74 08 <0f> 0b 2a 00 23 d8 4e c0 2b 0d 00 f8 6f c0 c1 f9 05 c1 e1 0c 0b
EIP: [<c0116926>] kmap_atomic+0x5e/0x89 SS:ESP 0068:f6f69e94
<6>note: run[2818] exited with preempt_count 2
eth0: no IPv6 routers present
BUG: unable to handle kernel paging request at virtual address fffb9f40
printing eip:
c01505af
*pde = 00003067
*pte = 00000000
Oops: 0002 [#6]
SMP
Modules linked in: ipt_REJECT ip6t_LOG tcp_highspeed tcp_htcp tcp_hybla xt_limit tcp_scalable tcp_vegas ipt_LOG tcp_westwood sch_netem ipt_hashlimit sch_hfsc sch_htb ip6table_mangle sch_sfq cls_fw iptable_mangle cls_u32 cls_route sch_ingress sch_red sch_tbf iptable_nat sch_teql ip_nat sch_prio ipt_owner sch_gred cls_rsvp xt_state cls_rsvp6 cls_tcindex ip_conntrack sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables i2c_algo_bit i810 iptable_filter lp ip_tables parport_pc parport i2c_dev usb_storage eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss pcspkr i2c_i801 i2c_core iTCO_wdt ohci1394 e1000 snd_pcm ieee1394 uhci_hcd snd_timer ehci_hcd snd soundcore snd_page_alloc
CPU: 0
EIP: 0060:[<c01505af>] Not tainted VLI
EFLAGS: 00010206 (2.6.19-highmem #2)
EIP is at prep_new_page+0xb5/0x106
eax: 00000000 ebx: c175eb80 ecx: 00000030 edx: 00000000
esi: 00000000 edi: fffb9f40 ebp: f6989e68 esp: f6989e40
ds: 007b es: 007b ss: 0068
Process dnscache-epoll- (pid: 2778, ti=f6988000 task=f76da550 task.ti=f6988000)
Stack: fffb9000 00000006 00000001 00000000 000280d2 00000000 c175eb80 00000001
00000246 c0561b80 f6989e94 c0150add c0561c0c 00000002 c0561c00 00000000
c175eb80 00000000 c0561b80 c0562220 00000044 f6989ec4 c0150cb6 000280d2
Call Trace:
[<c0150add>] buffered_rmqueue+0x93/0x134
[<c0150cb6>] get_page_from_freelist+0xa2/0xb9
[<c0150d1b>] __alloc_pages+0x4e/0x2b0
[<c0159c69>] do_anonymous_page+0x43/0x15d
[<c015a274>] __handle_mm_fault+0xd2/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<0805417d>] 0x805417d
=======================
Code: e4 00 00 00 00 d3 e0 83 f8 00 7e 3d 31 f6 89 45 e0 89 fb ba 03 00 00 00 89 d8 e8 25 63 fc ff b9 00 04 00 00 89 45 d8 89 c7 89 f0 <f3> ab ba 03 00 00 00 8b 45 d8 e8 93 63 fc ff 83 45 e4 01 83 c3
EIP: [<c01505af>] prep_new_page+0xb5/0x106 SS:ESP 0068:f6989e40
<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():1, irqs_disabled():1
[<c0103b64>] dump_trace+0x215/0x21a
[<c0103c0c>] show_trace_log_lvl+0x1a/0x30
[<c0103c34>] show_trace+0x12/0x14
[<c0103d31>] dump_stack+0x19/0x1b
[<c011efff>] __might_sleep+0xa3/0xab
[<c0138175>] down_read+0x15/0x29
[<c012ed57>] blocking_notifier_call_chain+0x1c/0x42
[<c0122bf9>] profile_task_exit+0x11/0x13
[<c01244da>] do_exit+0x1c/0x43b
[<c0104243>] do_trap+0x0/0xbd
[<c01159e6>] do_page_fault+0x34b/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<c01505af>] prep_new_page+0xb5/0x106
[<c0150add>] buffered_rmqueue+0x93/0x134
[<c0150cb6>] get_page_from_freelist+0xa2/0xb9
[<c0150d1b>] __alloc_pages+0x4e/0x2b0
[<c0159c69>] do_anonymous_page+0x43/0x15d
[<c015a274>] __handle_mm_fault+0xd2/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<0805417d>] 0x805417d
=======================
note: dnscache-epoll-[2778] exited with preempt_count 1
BUG: unable to handle kernel paging request at virtual address fffac380
printing eip:
c01505af
*pde = 00003067
*pte = 00000000
Oops: 0002 [#7]
SMP
Modules linked in: ipt_REJECT ip6t_LOG tcp_highspeed tcp_htcp tcp_hybla xt_limit tcp_scalable tcp_vegas ipt_LOG tcp_westwood sch_netem ipt_hashlimit sch_hfsc sch_htb ip6table_mangle sch_sfq cls_fw iptable_mangle cls_u32 cls_route sch_ingress sch_red sch_tbf iptable_nat sch_teql ip_nat sch_prio ipt_owner sch_gred cls_rsvp xt_state cls_rsvp6 cls_tcindex ip_conntrack sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables i2c_algo_bit i810 iptable_filter lp ip_tables parport_pc parport i2c_dev usb_storage eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss pcspkr i2c_i801 i2c_core iTCO_wdt ohci1394 e1000 snd_pcm ieee1394 uhci_hcd snd_timer ehci_hcd snd soundcore snd_page_alloc
CPU: 1
EIP: 0060:[<c01505af>] Not tainted VLI
EFLAGS: 00010206 (2.6.19-highmem #2)
EIP is at prep_new_page+0xb5/0x106
eax: 00000000 ebx: c174ad20 ecx: 00000320 edx: 00000000
esi: 00000000 edi: fffac380 ebp: f6fb1e68 esp: f6fb1e40
ds: 007b es: 007b ss: 0068
Process dnscache-epoll- (pid: 2904, ti=f6fb0000 task=f67c9030 task.ti=f6fb0000)
Stack: fffac000 00000006 00000001 00000000 000280d2 00000000 c174ad20 00000001
00000246 c0561b80 f6fb1e94 c0150add c0561c8c 00000002 c0561c80 00000000
c174ad20 00000000 c0561b80 c0562220 00000044 f6fb1ec4 c0150cb6 000280d2
Call Trace:
[<c0150add>] buffered_rmqueue+0x93/0x134
[<c0150cb6>] get_page_from_freelist+0xa2/0xb9
[<c0150d1b>] __alloc_pages+0x4e/0x2b0
[<c0159c69>] do_anonymous_page+0x43/0x15d
[<c015a274>] __handle_mm_fault+0xd2/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<0805417d>] 0x805417d
=======================
Code: e4 00 00 00 00 d3 e0 83 f8 00 7e 3d 31 f6 89 45 e0 89 fb ba 03 00 00 00 89 d8 e8 25 63 fc ff b9 00 04 00 00 89 45 d8 89 c7 89 f0 <f3> ab ba 03 00 00 00 8b 45 d8 e8 93 63 fc ff 83 45 e4 01 83 c3
EIP: [<c01505af>] prep_new_page+0xb5/0x106 SS:ESP 0068:f6fb1e40
<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():1, irqs_disabled():1
[<c0103b64>] dump_trace+0x215/0x21a
[<c0103c0c>] show_trace_log_lvl+0x1a/0x30
[<c0103c34>] show_trace+0x12/0x14
[<c0103d31>] dump_stack+0x19/0x1b
[<c011efff>] __might_sleep+0xa3/0xab
[<c0138175>] down_read+0x15/0x29
[<c012ed57>] blocking_notifier_call_chain+0x1c/0x42
[<c0122bf9>] profile_task_exit+0x11/0x13
[<c01244da>] do_exit+0x1c/0x43b
[<c0104243>] do_trap+0x0/0xbd
[<c01159e6>] do_page_fault+0x34b/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<c01505af>] prep_new_page+0xb5/0x106
[<c0150add>] buffered_rmqueue+0x93/0x134
[<c0150cb6>] get_page_from_freelist+0xa2/0xb9
[<c0150d1b>] __alloc_pages+0x4e/0x2b0
[<c0159c69>] do_anonymous_page+0x43/0x15d
[<c015a274>] __handle_mm_fault+0xd2/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<0805417d>] 0x805417d
=======================
note: dnscache-epoll-[2904] exited with preempt_count 1
BUG: unable to handle kernel paging request at virtual address fffac500
printing eip:
c01505af
*pde = 00003067
*pte = 00000000
Oops: 0002 [#8]
SMP
Modules linked in: ipt_REJECT ip6t_LOG tcp_highspeed tcp_htcp tcp_hybla xt_limit tcp_scalable tcp_vegas ipt_LOG tcp_westwood sch_netem ipt_hashlimit sch_hfsc sch_htb ip6table_mangle sch_sfq cls_fw iptable_mangle cls_u32 cls_route sch_ingress sch_red sch_tbf iptable_nat sch_teql ip_nat sch_prio ipt_owner sch_gred cls_rsvp xt_state cls_rsvp6 cls_tcindex ip_conntrack sch_cbq sch_dsmark ip6table_filter intelfb ip6_tables i2c_algo_bit i810 iptable_filter lp ip_tables parport_pc parport i2c_dev usb_storage eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss pcspkr i2c_i801 i2c_core iTCO_wdt ohci1394 e1000 snd_pcm ieee1394 uhci_hcd snd_timer ehci_hcd snd soundcore snd_page_alloc
CPU: 1
EIP: 0060:[<c01505af>] Not tainted VLI
EFLAGS: 00010206 (2.6.19-highmem #2)
EIP is at prep_new_page+0xb5/0x106
eax: 00000000 ebx: c1732c40 ecx: 000002c0 edx: 00000000
esi: 00000000 edi: fffac500 ebp: f6023e68 esp: f6023e40
ds: 007b es: 007b ss: 0068
Process dnscache-epoll- (pid: 2935, ti=f6022000 task=f7562a70 task.ti=f6022000)
Stack: fffac000 00000006 00000001 00000000 000280d2 00000000 c1732c40 00000001
00000246 c0561b80 f6023e94 c0150add c0561c8c 00000002 c0561c80 00000000
c1732c40 00000000 c0561b80 c0562220 00000044 f6023ec4 c0150cb6 000280d2
Call Trace:
[<c0150add>] buffered_rmqueue+0x93/0x134
[<c0150cb6>] get_page_from_freelist+0xa2/0xb9
[<c0150d1b>] __alloc_pages+0x4e/0x2b0
[<c0159c69>] do_anonymous_page+0x43/0x15d
[<c015a274>] __handle_mm_fault+0xd2/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<0805417d>] 0x805417d
=======================
Code: e4 00 00 00 00 d3 e0 83 f8 00 7e 3d 31 f6 89 45 e0 89 fb ba 03 00 00 00 89 d8 e8 25 63 fc ff b9 00 04 00 00 89 45 d8 89 c7 89 f0 <f3> ab ba 03 00 00 00 8b 45 d8 e8 93 63 fc ff 83 45 e4 01 83 c3
EIP: [<c01505af>] prep_new_page+0xb5/0x106 SS:ESP 0068:f6023e40
<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():1, irqs_disabled():1
[<c0103b64>] dump_trace+0x215/0x21a
[<c0103c0c>] show_trace_log_lvl+0x1a/0x30
[<c0103c34>] show_trace+0x12/0x14
[<c0103d31>] dump_stack+0x19/0x1b
[<c011efff>] __might_sleep+0xa3/0xab
[<c0138175>] down_read+0x15/0x29
[<c012ed57>] blocking_notifier_call_chain+0x1c/0x42
[<c0122bf9>] profile_task_exit+0x11/0x13
[<c01244da>] do_exit+0x1c/0x43b
[<c0104243>] do_trap+0x0/0xbd
[<c01159e6>] do_page_fault+0x34b/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<c01505af>] prep_new_page+0xb5/0x106
[<c0150add>] buffered_rmqueue+0x93/0x134
[<c0150cb6>] get_page_from_freelist+0xa2/0xb9
[<c0150d1b>] __alloc_pages+0x4e/0x2b0
[<c0159c69>] do_anonymous_page+0x43/0x15d
[<c015a274>] __handle_mm_fault+0xd2/0x23d
[<c011582b>] do_page_fault+0x190/0x5bb
[<c04afd49>] error_code+0x39/0x40
[<0805417d>] 0x805417d
=======================
note: dnscache-epoll-[2935] exited with preempt_count 1
Ingress scheduler: Classifier actions prefered over netfilter
--
On Tue, 5 Dec 2006 19:25:13 +0200
Sami Farin <[email protected]> wrote:
> [1.] PROBLEM: 2.6.19 + highmem = BUG at do_wp_page
Can you send the .config please?
On Tue, Dec 05, 2006 at 22:39:45 -0800, Andrew Morton wrote:
> On Tue, 5 Dec 2006 19:25:13 +0200
> Sami Farin <[email protected]> wrote:
>
> > [1.] PROBLEM: 2.6.19 + highmem = BUG at do_wp_page
>
> Can you send the .config please?
I happened to modify configuration a bit,
CONFIG_HIGHMEM4G to CONFIG_HIGHMEM64G
and added CONFIG_X86_MCE_P4THERMAL=y.
Otherwise this should be pretty close.
I haven't tried to boot with CONFIG_HIGHMEM64G yet.
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-highmem
# Tue Dec 5 18:54:41 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
CONFIG_PERFCTR=y
CONFIG_KPERFCTR=y
# CONFIG_PERFCTR_DEBUG is not set
# CONFIG_PERFCTR_INIT_TESTS is not set
CONFIG_PERFCTR_VIRTUAL=y
CONFIG_PERFCTR_GLOBAL=y
CONFIG_PERFCTR_INTERRUPT_SUPPORT=y
CONFIG_PERFCTR_CPUS_FORBIDDEN_MASK=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_K8_NB=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_SECMARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CONNTRACK_NETLINK is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_TARGET_TARPIT=m
CONFIG_IP_NF_MATCH_CONNLIMIT=m
CONFIG_IP_NF_SET=m
CONFIG_IP_NF_SET_MAX=256
CONFIG_IP_NF_SET_HASHSIZE=1024
CONFIG_IP_NF_SET_IPMAP=m
CONFIG_IP_NF_SET_MACIPMAP=m
CONFIG_IP_NF_SET_PORTMAP=m
CONFIG_IP_NF_SET_IPHASH=m
CONFIG_IP_NF_SET_NETHASH=m
CONFIG_IP_NF_SET_IPPORTHASH=m
CONFIG_IP_NF_SET_IPTREE=m
CONFIG_IP_NF_MATCH_SET=m
CONFIG_IP_NF_TARGET_SET=m
CONFIG_IP_NF_MATCH_TIME=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
# CONFIG_BAYCOM_EPP is not set
CONFIG_YAM=m
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
# CONFIG_MTD_DOC2001 is not set
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
# CONFIG_MTD_NAND_CS553X is not set
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
#
# Misc devices
#
CONFIG_IBM_ASM=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_MSI_LAPTOP is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
# CONFIG_BLK_DEV_CS5535 is not set
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT821X=m
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
CONFIG_PCMCIA_FDOMAIN=m
# CONFIG_PCMCIA_NINJA_SCSI is not set
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SX4=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_DGRS=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
# CONFIG_IPW2200_RADIOTAP is not set
# CONFIG_IPW2200_PROMISCUOUS is not set
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
CONFIG_ATM_ENI_TUNE_BURST=y
# CONFIG_ATM_ENI_BURST_TX_16W is not set
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
# CONFIG_ATM_ENI_BURST_RX_16W is not set
# CONFIG_ATM_ENI_BURST_RX_8W is not set
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_BASE is not set
# CONFIG_GIGASET_M105 is not set
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
# CONFIG_ISDN_DRV_AVMB1_C4 is not set
#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
# CONFIG_RIO_OLDPCI is not set
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_ITCO_WDT=m
CONFIG_SC1200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_I810 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
# CONFIG_FB_CYBLA is not set
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
# CONFIG_USB_KEYSPAN_REMOTE is not set
CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
CONFIG_EDAC_E752X=y
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_NOLOCK is not set
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_RANDOM_FORTUNA=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
--
On Wed, Dec 06, 2006 at 11:41:38 +0200, Sami Farin wrote:
> On Tue, Dec 05, 2006 at 22:39:45 -0800, Andrew Morton wrote:
> > On Tue, 5 Dec 2006 19:25:13 +0200
> > Sami Farin <[email protected]> wrote:
> >
> > > [1.] PROBLEM: 2.6.19 + highmem = BUG at do_wp_page
> >
> > Can you send the .config please?
>
> I happened to modify configuration a bit,
> CONFIG_HIGHMEM4G to CONFIG_HIGHMEM64G
> and added CONFIG_X86_MCE_P4THERMAL=y.
> Otherwise this should be pretty close.
> I haven't tried to boot with CONFIG_HIGHMEM64G yet.
CONFIG_HIGHMEM64G=y doesn't work, either, in case someone cares.
With mem=896M highmem-enabled kernels work OK.
--
On Tue, Dec 12, 2006 at 12:46:01 +0200, Sami Farin wrote:
> On Wed, Dec 06, 2006 at 11:41:38 +0200, Sami Farin wrote:
> > On Tue, Dec 05, 2006 at 22:39:45 -0800, Andrew Morton wrote:
> > > On Tue, 5 Dec 2006 19:25:13 +0200
> > > Sami Farin <[email protected]> wrote:
> > >
> > > > [1.] PROBLEM: 2.6.19 + highmem = BUG at do_wp_page
> > >
> > > Can you send the .config please?
> >
> > I happened to modify configuration a bit,
> > CONFIG_HIGHMEM4G to CONFIG_HIGHMEM64G
> > and added CONFIG_X86_MCE_P4THERMAL=y.
> > Otherwise this should be pretty close.
> > I haven't tried to boot with CONFIG_HIGHMEM64G yet.
>
> CONFIG_HIGHMEM64G=y doesn't work, either, in case someone cares.
>
> With mem=896M highmem-enabled kernels work OK.
Maxime Austruy suggested that I try kmap_atomic-debugging.patch
from 2.6.19-mm1 or just 2.6.19-mm1, but no thanks, after reading
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19/2.6.19-mm1/README
I got these with 2.6.19.1 + CONFIG_HIGHMEM64G + debugging.patch...
fortuna-random updates one block in add_timer_randomness,
and crypto seems to like to use kmap_atomic and seems
like I have to add some magic into fortuna (like, adding
my own aes256 and sha256 functions, hacking a flag into crypto API
so that it uses kmap instead of kmap_atomic, or what...?).
2006-12-12 17:32:32.090741500 <6>hdf: cache flushes supported
2006-12-12 17:32:32.090743500 <6> hdf:BUG: warning at arch/i386/mm/highmem.c:41/kmap_atomic()
2006-12-12 17:32:32.090745500 <4> [<c0103cfb>] dump_trace+0x215/0x21a
2006-12-12 17:32:32.090746500 <4> [<c0103da3>] show_trace_log_lvl+0x1a/0x30
2006-12-12 17:32:32.090747500 <4> [<c0103dcb>] show_trace+0x12/0x14
2006-12-12 17:32:32.090749500 <4> [<c0103ec8>] dump_stack+0x19/0x1b
2006-12-12 17:32:32.090750500 <4> [<c01173e0>] kmap_atomic+0x1e4/0x20e
2006-12-12 17:32:32.090754500 <4> [<c028a459>] update+0x87/0x158
2006-12-12 17:32:32.090757500 <4> [<c028a30d>] crypto_digest_update+0x4a/0x5c
2006-12-12 17:32:32.090758500 <4> [<c03154ff>] add_entropy_words+0xdb/0x12b
2006-12-12 17:32:32.090768500 <4> [<c031586a>] add_timer_randomness+0x91/0x113
2006-12-12 17:32:32.090769500 <4> [<c0315c84>] add_disk_randomness+0xf8/0xfd
2006-12-12 17:32:32.090771500 <4> [<c035ef46>] __ide_end_request+0x66/0xe2
2006-12-12 17:32:32.090772500 <4> [<c035f000>] ide_end_request+0x3e/0x5c
2006-12-12 17:32:32.090773500 <4> [<c0366d40>] ide_dma_intr+0x7a/0xba
2006-12-12 17:32:32.090774500 <4> [<c0360b11>] ide_intr+0xac/0x13f
2006-12-12 17:32:32.090775500 <4> [<c014b0e9>] handle_IRQ_event+0x2f/0x5d
2006-12-12 17:32:32.090780500 <4> [<c014c16f>] handle_fasteoi_irq+0x74/0xc0
2006-12-12 17:32:32.090782500 <4> [<c0105818>] do_IRQ+0x70/0xdc
2006-12-12 17:32:32.090783500 <4> [<c01037fa>] common_interrupt+0x1a/0x20
2006-12-12 17:32:32.090784500 <4> [<c0100f03>] mwait_idle_with_hints+0x41/0x50
2006-12-12 17:32:32.090785500 <4> [<c0100f21>] mwait_idle+0xf/0x1f
2006-12-12 17:32:32.090786500 <4> [<c0100dcb>] cpu_idle+0x8c/0x8e
2006-12-12 17:32:32.090788500 <4> [<c0100387>] _stext+0x23/0x25
2006-12-12 17:32:32.090792500 <4> [<c06858e4>] start_kernel+0x19d/0x1e8
2006-12-12 17:32:32.090793500 <4> =======================
Then it seemed to work OK, till I ran "memset 1000" which allocates
1000<<20 bytes of memory and then does memset() for it.
This shouldn't be caused by my crypto stuff?
2006-12-12 17:40:22.880176500 <1>BUG: unable to handle kernel paging request at virtual address fffb9e40
2006-12-12 17:40:22.880192500 <1> printing eip:
2006-12-12 17:40:22.880193500 <4>c015117f
2006-12-12 17:40:22.880194500 <1>*pde = 00000000
2006-12-12 17:40:22.880195500 <0>Oops: 0002 [#1]
2006-12-12 17:40:22.880196500 <0>SMP
2006-12-12 17:40:22.880197500 <4>Modules linked in: xt_CLASSIFY ipt_ECN xt_CONNMARK ipt_connlimit ipt_TARPIT xt_length ipt_set xt_multiport ip_set_iphash ip_set_nethash ip_set_portmap ipt_REJECT ip6t_LOG xt_limit ipt_LOG ipt_hashlimit ip6table_mangle iptable_mangle iptable_nat ip_nat tcp_highspeed tcp_htcp tcp_hybla tcp_scalable ipt_owner tcp_vegas tcp_westwood ip_set xt_state sch_netem sch_hfsc sch_htb sch_sfq cls_fw cls_u32 cls_route sch_ingress sch_red sch_tbf ip_conntrack sch_teql sch_prio sch_gred cls_rsvp cls_rsvp6 cls_tcindex sch_cbq sch_dsmark ip6table_filter intelfb i2c_algo_bit ip6_tables i810 iptable_filter ip_tables lp parport_pc parport usb_storage i2c_dev eeprom ohci_hcd binfmt_misc loop dm_mod video button battery asus_acpi ac tcp_cubic irlan irda crc_ccitt 8139too mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm ohci1394 snd_timer snd ieee1394 soundcore e1000 pcspkr ehci_hcd iTCO_wdt snd_page_alloc i2c_i801 i2c_cor
2006-12-12 17:40:22.880248500 e uhci_hcd
2006-12-12 17:40:22.880249500 <0>CPU: 0
2006-12-12 17:40:22.880250500 <0>EIP: 0060:[<c015117f>] Not tainted VLI
2006-12-12 17:40:22.880251500 <0>EFLAGS: 00010296 (2.6.19.1-highmem #7)
2006-12-12 17:40:22.880253500 <0>EIP is at prep_new_page+0xb5/0x106
2006-12-12 17:40:22.880254500 <0>eax: 00000000 ebx: c17c00a0 ecx: 00000070 edx: 80000000
2006-12-12 17:40:22.880255500 <0>esi: 00000000 edi: fffb9e40 ebp: e9347e3c esp: e9347e14
2006-12-12 17:40:22.880257500 <0>ds: 007b es: 007b ss: 0068
2006-12-12 17:40:22.880262500 <0>Process memset (pid: 3164, ti=e9346000 task=f5f10550 task.ti=e9346000)
2006-12-12 17:40:22.880276500 <0>Stack: fffb9000 00000006 00000001 00000000 000280d2 00000000 c17c00a0 00000001
2006-12-12 17:40:22.880278500 <0> 00000246 c0564c00 e9347e68 c01516ad c0564c8c 00000002 c0564c80 00000000
2006-12-12 17:40:22.880279500 <0> c17c00a0 00000000 c0564c00 c05652a0 00000044 e9347e98 c0151886 000280d2
2006-12-12 17:40:22.880281500 <0>Call Trace:
2006-12-12 17:40:22.880286500 <0> [<c01516ad>] buffered_rmqueue+0x93/0x134
2006-12-12 17:40:22.880287500 <0> [<c0151886>] get_page_from_freelist+0xa2/0xb9
2006-12-12 17:40:22.880289500 <0> [<c01518eb>] __alloc_pages+0x4e/0x2b0
2006-12-12 17:40:22.880290500 <0> [<c015af19>] do_anonymous_page+0x4b/0x1e6
2006-12-12 17:40:22.880291500 <0> [<c015b6b4>] __handle_mm_fault+0x125/0x2eb
2006-12-12 17:40:22.880292500 <0> [<c0115e4d>] do_page_fault+0x18f/0x692
2006-12-12 17:40:22.880343500 <0> [<c04b2f09>] error_code+0x39/0x40
2006-12-12 17:40:22.880345500 <0> [<08048736>] 0x8048736
2006-12-12 17:40:22.880346500 <0> =======================
2006-12-12 17:40:22.880347500 <0>Code: e4 00 00 00 00 d3 e0 83 f8 00 7e 3d 31 f6 89 45 e0 89 fb ba 03 00 00 00 89 d8 e8 89 60 fc ff b9 00 04 00 00 89 45 d8 89 c7 89 f0 <f3> ab ba 03 00 00 00 8b 45 d8 e8 7c 62 fc ff 83 45 e4 01 83 c3
2006-12-12 17:40:22.880360500 <0>EIP: [<c015117f>] prep_new_page+0xb5/0x106 SS:ESP 0068:e9347e14
2006-12-12 17:40:22.880367500 <4> <3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
2006-12-12 17:40:22.880368500 <4>in_atomic():1, irqs_disabled():1
2006-12-12 17:40:22.880369500 <4> [<c0103cfb>] dump_trace+0x215/0x21a
2006-12-12 17:40:22.880371500 <4> [<c0103da3>] show_trace_log_lvl+0x1a/0x30
2006-12-12 17:40:22.880372500 <4> [<c0103dcb>] show_trace+0x12/0x14
2006-12-12 17:40:22.880373500 <4> [<c0103ec8>] dump_stack+0x19/0x1b
2006-12-12 17:40:22.880379500 <4> [<c011fb13>] __might_sleep+0xa3/0xab
2006-12-12 17:40:22.880394500 <4> [<c0138d35>] down_read+0x15/0x29
2006-12-12 17:40:22.880405500 <4> [<c012f917>] blocking_notifier_call_chain+0x1c/0x42
2006-12-12 17:40:22.880482500 <4> [<c0123711>] profile_task_exit+0x11/0x13
2006-12-12 17:40:22.880559500 <4> [<c0124ff2>] do_exit+0x1c/0x43b
2006-12-12 17:40:22.880634500 <4> [<c01043da>] do_trap+0x0/0xbd
2006-12-12 17:40:22.880712500 <4> [<c0116018>] do_page_fault+0x35a/0x692
2006-12-12 17:40:22.880840500 <4> [<c04b2f09>] error_code+0x39/0x40
2006-12-12 17:40:22.880921500 <4> [<c015117f>] prep_new_page+0xb5/0x106
2006-12-12 17:40:22.880949500 <4> [<c01516ad>] buffered_rmqueue+0x93/0x134
2006-12-12 17:40:22.881080500 <4> [<c0151886>] get_page_from_freelist+0xa2/0xb9
2006-12-12 17:40:22.881110500 <4> [<c01518eb>] __alloc_pages+0x4e/0x2b0
2006-12-12 17:40:22.881239500 <4> [<c015af19>] do_anonymous_page+0x4b/0x1e6
2006-12-12 17:40:22.881269500 <4> [<c015b6b4>] __handle_mm_fault+0x125/0x2eb
2006-12-12 17:40:22.881349500 <4> [<c0115e4d>] do_page_fault+0x18f/0x692
2006-12-12 17:40:22.881426500 <4> [<c04b2f09>] error_code+0x39/0x40
2006-12-12 17:40:22.881505500 <4> [<08048736>] 0x8048736
2006-12-12 17:40:22.881551500 <4> =======================
2006-12-12 17:40:22.881653500 <6>note: memset[3164] exited with preempt_count 1
Other things worth noting, maybe: I use loop-aes-v3.1e for encrypted swap.
--
In-Reply-To: <[email protected]>
On Tue, 5 Dec 2006 19:25:13 +0200, Sami Farin wrote:
> BUG: unable to handle kernel paging request at virtual address fffb9dc0
> eax: fffb8000 ebx: fffb9000 ecx: 00000090 edx: 00000000
> esi: fffb9dc0 edi: fffb8dc0 ebp: f6f89f24 esp: f6f89ef0
1f: 89 de mov %ebx,%esi
21: b9 00 04 00 00 mov $0x400,%ecx
26: 89 45 cc mov %eax,0xffffffcc(%ebp)
29: 89 c7 mov %eax,%edi
0: f3 a5 repz movsl %ds:(%esi),%es:(%edi) <=====
Processor started to copy a page, then with 576 bytes left to copy
the source page got unmapped. Nice.
This possibly happened during a device interrupt. What does
/proc/interrupts say?
--
MBTI: IXTP
On Tue, Dec 12, 2006 at 15:10:56 -0500, Chuck Ebbert wrote:
> In-Reply-To: <[email protected]>
>
> On Tue, 5 Dec 2006 19:25:13 +0200, Sami Farin wrote:
>
> > BUG: unable to handle kernel paging request at virtual address fffb9dc0
>
> > eax: fffb8000 ebx: fffb9000 ecx: 00000090 edx: 00000000
> > esi: fffb9dc0 edi: fffb8dc0 ebp: f6f89f24 esp: f6f89ef0
>
> 1f: 89 de mov %ebx,%esi
> 21: b9 00 04 00 00 mov $0x400,%ecx
> 26: 89 45 cc mov %eax,0xffffffcc(%ebp)
> 29: 89 c7 mov %eax,%edi
>
> 0: f3 a5 repz movsl %ds:(%esi),%es:(%edi) <=====
>
> Processor started to copy a page, then with 576 bytes left to copy
> the source page got unmapped. Nice.
>
> This possibly happened during a device interrupt. What does
> /proc/interrupts say?
CPU0 CPU1
0: 8253316 8272069 IO-APIC-edge timer
1: 2 0 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
8: 6903 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 4 0 IO-APIC-edge i8042
16: 63512 55991 IO-APIC-fasteoi ide2, serial
17: 0 0 IO-APIC-fasteoi uhci_hcd:usb1
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb5, ehci_hcd:usb6
19: 3 0 IO-APIC-fasteoi libata, ohci1394, uhci_hcd:usb4
20: 105615 0 IO-APIC-fasteoi eth0
21: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
22: 19245 19298 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb7
23: 148793 148782 IO-APIC-fasteoi HDA Intel
NMI: 0 0
LOC: 16200743 16201617
ERR: 0
MIS: 0
BTW. do you add In-Reply-To line manually or is compuserve buggy?
--
On Tue, Dec 12, 2006 at 15:10:56 -0500, Chuck Ebbert wrote:
> In-Reply-To: <[email protected]>
>
> On Tue, 5 Dec 2006 19:25:13 +0200, Sami Farin wrote:
>
> > BUG: unable to handle kernel paging request at virtual address fffb9dc0
>
> > eax: fffb8000 ebx: fffb9000 ecx: 00000090 edx: 00000000
> > esi: fffb9dc0 edi: fffb8dc0 ebp: f6f89f24 esp: f6f89ef0
>
> 1f: 89 de mov %ebx,%esi
> 21: b9 00 04 00 00 mov $0x400,%ecx
> 26: 89 45 cc mov %eax,0xffffffcc(%ebp)
> 29: 89 c7 mov %eax,%edi
>
> 0: f3 a5 repz movsl %ds:(%esi),%es:(%edi) <=====
>
> Processor started to copy a page, then with 576 bytes left to copy
> the source page got unmapped. Nice.
>
> This possibly happened during a device interrupt. What does
> /proc/interrupts say?
My system now works with HIGHMEM (got 103 MB extra mem for use).
I Fixed™ this by nuking crypto API out of the fortuna patch
and including my own functions...
$ cat /proc/sys/kernel/random/cipher_algo
Snuffle 2005
hehe..
--