PATCH 1 of 2
This patch sets a default raid level on a volume that either does not support
reading the geometry or reports an invalid geometry for whatever reason. We
were always setting some values for heads and sectors but never set a raid
level. This caused lots of problems on some buggy firmware. Please consider
this for inclusion.
Thanks,
mikem
Signed-off-by: Mike Miller <[email protected]>
--------------------------------------------------------------------------------
drivers/block/cciss.c | 1 +
1 files changed, 1 insertion(+)
diff -puN drivers/block/cciss.c~cciss_set_default_raidlevel drivers/block/cciss.c
--- linux-2.6-work/drivers/block/cciss.c~cciss_set_default_raidlevel 2006-12-13 11:04:39.000000000 -0600
+++ linux-2.6-work-mikem/drivers/block/cciss.c 2006-12-13 11:05:06.000000000 -0600
@@ -1907,6 +1907,7 @@ static void cciss_geometry_inquiry(int c
"does not support reading geometry\n");
drv->heads = 255;
drv->sectors = 32; // Sectors per track
+ drv->raid_level = RAID_UNKNOWN;
} else {
drv->heads = inq_buff->data_byte[6];
drv->sectors = inq_buff->data_byte[7];
_