[ 0.000000] Linux version 2.6.20-rc4-ipp2p (root@highlander) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #0 Sun Jan 7 17:03:14 CET 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001eef0000 end: 000000001eff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001eff0000 size: 0000000000003000 end: 000000001eff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000001eff3000 size: 000000000000d000 end: 000000001f000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
[ 0.000000] BIOS-e820: 000000001eff0000 - 000000001eff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001eff3000 - 000000001f000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 495MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f52f0
[ 0.000000] Entering add_active_range(0, 0, 126960) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 126960
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 126960
[ 0.000000] On node 0 totalpages: 126960
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 959 pages used for memmap
[ 0.000000] Normal zone: 121905 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 KM400 ) @ 0x000f6dd0
[ 0.000000] ACPI: RSDT (v001 KM400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1eff3000
[ 0.000000] ACPI: FADT (v001 KM400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1eff3040
[ 0.000000] ACPI: MADT (v001 KM400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1eff7f40
[ 0.000000] ACPI: DSDT (v001 KM400 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:6 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f000000:dfc00000)
[ 0.000000] Detected 1400.087 MHz processor.
[ 17.317429] Built 1 zonelists. Total pages: 125969
[ 17.317432] Kernel command line: vga=extended root=/dev/hda5 ro
[ 17.317654] mapped APIC to ffffd000 (fee00000)
[ 17.317658] mapped IOAPIC to ffffc000 (fec00000)
[ 17.317663] Enabling fast FPU save and restore... done.
[ 17.317667] Enabling unmasked SIMD FPU exception support... done.
[ 17.317682] Initializing CPU#0
[ 17.317776] CPU 0 irqstacks, hard=c02e1000 soft=c02e0000
[ 17.317780] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 17.319764] Console: colour VGA+ 80x50
[ 17.322864] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.323380] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.342391] Memory: 498268k/507840k available (1241k kernel code, 8964k reserved, 504k data, 148k init, 0k highmem)
[ 17.342472] virtual kernel memory layout:
[ 17.342474] fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB)
[ 17.342477] vmalloc : 0xdf800000 - 0xfffb5000 ( 519 MB)
[ 17.342479] lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB)
[ 17.342481] .init : 0xc02b6000 - 0xc02db000 ( 148 kB)
[ 17.342483] .data : 0xc023671b - 0xc02b4950 ( 504 kB)
[ 17.342485] .text : 0xc0100000 - 0xc023671b (1241 kB)
[ 17.342847] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.421732] Calibrating delay using timer specific routine.. 2803.40 BogoMIPS (lpj=5606808)
[ 17.421886] Mount-cache hash table entries: 512
[ 17.422087] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 17.422099] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.422158] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.422212] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 17.422233] CPU: AMD Athlon(tm) XP 1600+ stepping 02
[ 17.422368] Checking 'hlt' instruction... OK.
[ 17.437843] ACPI: Core revision 20060707
[ 17.541912] ENABLING IO-APIC IRQs
[ 17.542294] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.689970] NET: Registered protocol family 16
[ 17.690138] ACPI: bus type pci registered
[ 17.698058] PCI: PCI BIOS revision 2.10 entry at 0xfbaf0, last bus=1
[ 17.698114] PCI: Using configuration type 1
[ 17.698167] Setting up standard PCI resources
[ 17.708070] ACPI: Interpreter enabled
[ 17.708133] ACPI: Using IOAPIC for interrupt routing
[ 17.709119] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.709180] PCI: Probing PCI hardware (bus 00)
[ 17.709326] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 17.710265] Boot video device is 0000:01:00.0
[ 17.710317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.767357] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 17.768219] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 17.769074] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
[ 17.769915] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.770801] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.771680] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.772555] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.773430] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.774594] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 17.775416] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 17.776064] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 17.776807] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 17.780312] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.780378] pnp: PnP ACPI init
[ 17.786780] pnp: PnP ACPI: found 13 devices
[ 17.786920] PCI: Using ACPI for IRQ routing
[ 17.786976] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.913985] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
[ 17.914044] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
[ 17.914429] PCI: Bridge: 0000:00:01.0
[ 17.914481] IO window: disabled.
[ 17.914536] MEM window: ec000000-edffffff
[ 17.914590] PREFETCH window: e8000000-ebffffff
[ 17.914663] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.914699] NET: Registered protocol family 2
[ 17.953546] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 17.953713] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[ 17.953910] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 17.954036] TCP: Hash tables configured (established 16384 bind 8192)
[ 17.954093] TCP reno registered
[ 17.965633] checking if image is initramfs... it is
[ 18.233842] Freeing initrd memory: 2369k freed
[ 18.234444] audit: initializing netlink socket (disabled)
[ 18.234513] audit(1168186307.908:1): initialized
[ 18.234723] io scheduler noop registered
[ 18.234820] io scheduler cfq registered (default)
[ 18.235023] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 18.308374] Real Time Clock Driver v1.12ac
[ 18.308477] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 18.308677] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.308958] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.309840] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.310267] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.311211] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 18.311647] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 18.311705] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 18.561264] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.561443] mice: PS/2 mouse device common for all mice
[ 18.591681] Using IPI Shortcut mode
[ 18.591811] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 18.592210] Freeing unused kernel memory: 148k freed
[ 18.593162] Time: tsc clocksource has been installed.
[ 18.610735] input: AT Translated Set 2 keyboard as /class/input/input0
[ 18.695398] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 18.695467] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 18.696281] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 18.696829] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 18.696894] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 18.697054] VP_IDE: chipset revision 6
[ 18.697127] VP_IDE: not 100% native mode: will probe irqs later
[ 18.697194] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 18.697265] ide0: BM-DMA at 0xe900-0xe907, BIOS settings: hda:DMA, hdb:DMA
[ 18.697414] ide1: BM-DMA at 0xe908-0xe90f, BIOS settings: hdc:DMA, hdd:pio
[ 18.697560] Probing IDE interface ide0...
[ 19.112986] hda: IC35L060AVV207-0, ATA DISK drive
[ 19.392846] hdb: SAMSUNG SV1203N, ATA DISK drive
[ 19.449687] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 19.449899] Probing IDE interface ide1...
[ 19.864614] hdc: Maxtor 6Y160P0, ATA DISK drive
[ 20.536456] ide1 at 0x170-0x177,0x376 on irq 15
[ 20.545433] NET: Registered protocol family 1
[ 20.590307] ACPI: Fan [FAN] (on)
[ 20.597908] ACPI: Thermal Zone [THRM] (56 C)
[ 20.752010] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 20.752152] 3c59x: Donald Becker and others. http://www.scyld.com/network/vortex.html
[ 20.752220] 0000:00:06.0: 3Com PCI 3c905C Tornado at df822000.
[ 20.792318] SCSI subsystem initialized
[ 20.797544] libata version 2.00 loaded.
[ 20.810868] usbcore: registered new interface driver usbfs
[ 20.810972] usbcore: registered new interface driver hub
[ 20.811056] usbcore: registered new device driver usb
[ 20.820234] sata_via 0000:00:0f.0: version 2.0
[ 20.820267] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 20.821652] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 20.821814] ata1: SATA max UDMA/133 cmd 0xE300 ctl 0xE402 bmdma 0xE700 irq 16
[ 20.821912] ata2: SATA max UDMA/133 cmd 0xE500 ctl 0xE602 bmdma 0xE708 irq 16
[ 20.821989] scsi0 : sata_via
[ 20.824175] USB Universal Host Controller Interface driver v3.0
[ 20.837721] hda: max request size: 512KiB
[ 20.868217] hda: 78125000 sectors (40000 MB) w/1821KiB Cache, CHS=16383/255/63
[ 20.870081] hda: cache flushes supported
[ 20.870197] hda: hda1 hda2 < hda5<6>via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 20.948979] hda6 >
[ 20.959259] hdb: max request size: 512KiB
[ 20.962428] hdb: Host Protected Area detected.
[ 20.962431] current capacity is 66055248 sectors (33820 MB)
[ 20.962434] native capacity is 234493056 sectors (120060 MB)
[ 20.963013] hdb: Host Protected Area disabled.
[ 20.963069] hdb: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63
[ 20.973428] hdb: cache flushes supported
[ 20.973552] hdb: hdb1 hdb2
[ 20.986947] hdc: max request size: 512KiB
[ 21.004667] hdc: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63
[ 21.007150] hdc: cache flushes supported
[ 21.007280] hdc: hdc1
[ 21.024008] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 21.034513] ATA: abnormal status 0x7F on port 0xE307
[ 21.034591] scsi1 : sata_via
[ 21.235880] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 21.246384] ATA: abnormal status 0x7F on port 0xE507
[ 21.247200] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 21.247264] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 21.247425] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.247800] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 21.247954] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000ea00
[ 21.248194] usb usb1: configuration #1 chosen from 1 choice
[ 21.248280] hub 1-0:1.0: USB hub found
[ 21.248343] hub 1-0:1.0: 2 ports detected
[ 21.352023] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 21.352187] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.352266] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 21.352356] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000eb00
[ 21.352558] usb usb2: configuration #1 chosen from 1 choice
[ 21.352644] hub 2-0:1.0: USB hub found
[ 21.352706] hub 2-0:1.0: 2 ports detected
[ 21.456004] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 21.456168] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.456249] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 21.456339] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000ec00
[ 21.456549] usb usb3: configuration #1 chosen from 1 choice
[ 21.456635] hub 3-0:1.0: USB hub found
[ 21.456697] hub 3-0:1.0: 2 ports detected
[ 21.559884] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 21.560048] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 21.560131] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 21.560221] uhci_hcd 0000:00:10.3: irq 18, io base 0x0000ed00
[ 21.560425] usb usb4: configuration #1 chosen from 1 choice
[ 21.560511] hub 4-0:1.0: USB hub found
[ 21.560573] hub 4-0:1.0: 2 ports detected
[ 21.663987] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 21.664153] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 21.664248] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 21.664374] ehci_hcd 0000:00:10.4: irq 18, io mem 0xee020000
[ 21.664434] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.664598] usb usb5: configuration #1 chosen from 1 choice
[ 21.664684] hub 5-0:1.0: USB hub found
[ 21.664747] hub 5-0:1.0: 8 ports detected
[ 21.771489] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 21.771561] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 19
[ 21.771848] eth1: VIA Rhine II at 0xee021000, 00:11:09:8c:95:50, IRQ 19.
[ 21.772844] eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[ 22.404234] ReiserFS: hda5: found reiserfs format "3.6" with standard journal
[ 22.404309] ReiserFS: hda5: using ordered data mode
[ 22.410798] ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 22.413063] ReiserFS: hda5: checking transaction log (hda5)
[ 22.464375] ReiserFS: hda5: Using r5 hash to sort names
[ 25.589967] input: PC Speaker as /class/input/input1
[ 25.651878] CAPI Subsystem Rev 1.1.2.8
[ 25.659605] b1: revision 1.1.2.2
[ 25.664746] b1dma: revision 1.1.2.3
[ 25.668270] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 20
[ 25.668381] b1pci: PCI BIOS reports AVM-B1 at i/o 0xe200, irq 20
[ 26.335837] kcapi: Controller 1: b1pci-e200 attached
[ 26.335900] b1pci: AVM B1 PCI at i/o 0xe200, irq 20, revision 2
[ 26.335984] b1pci: revision 1.1.2.2
[ 26.483875] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 26.516139] hdc: cache flushes supported
[ 26.553164] FDC 0 is a post-1991 82077
[ 26.596486] hda: cache flushes supported
[ 26.608825] hdb: cache flushes supported
[ 27.021170] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 27.021240] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21
[ 27.021535] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 29.007112] hda: cache flushes supported
[ 29.024479] hdc: cache flushes supported
[ 29.041863] hdb: cache flushes supported
[ 29.130699] Adding 2000052k swap on /dev/hdb1. Priority:-1 extents:1 across:2000052k
[ 36.168276] TCP cubic registered
[ 36.201530] PPP generic driver version 2.4.2
[ 36.206509] NET: Registered protocol family 24
[ 36.220745] tun: Universal TUN/TAP device driver, 1.6
[ 36.220807] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 36.238251] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[ 36.243260] capidrv: Rev 1.1.2.2: loaded
[ 36.267614] PPP Deflate Compression module registered
[ 36.343503] PPP MPPE Compression module registered
[ 36.361295] lp0: using parport0 (interrupt-driven).
[ 36.406011] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
[ 59.876006] kjournald starting. Commit interval 5 seconds
[ 59.876314] EXT3 FS on hda1, internal journal
[ 59.876410] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.907054] ReiserFS: hda6: found reiserfs format "3.6" with standard journal
[ 59.907142] ReiserFS: hda6: using ordered data mode
[ 59.914660] ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 59.916900] ReiserFS: hda6: checking transaction log (hda6)
[ 59.987520] ReiserFS: hda6: Using r5 hash to sort names
[ 60.033831] ReiserFS: hdc1: found reiserfs format "3.6" with standard journal
[ 60.033928] ReiserFS: hdc1: using ordered data mode
[ 60.038462] ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 60.040583] ReiserFS: hdc1: checking transaction log (hdc1)
[ 60.047116] ReiserFS: hdc1: Using r5 hash to sort names
[ 60.089633] ReiserFS: hdb2: found reiserfs format "3.6" with standard journal
[ 60.089729] ReiserFS: hdb2: using ordered data mode
[ 60.095983] ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 60.098254] ReiserFS: hdb2: checking transaction log (hdb2)
[ 60.131981] ReiserFS: hdb2: Using r5 hash to sort names
[ 61.071498] NET: Registered protocol family 15
[ 62.167658] PM: Writing back config space on device 0000:00:06.0 at offset f (was a0a0100, writing a0a010b)
[ 62.167676] PM: Writing back config space on device 0000:00:06.0 at offset 5 (was 0, writing ee022000)
[ 62.167683] PM: Writing back config space on device 0000:00:06.0 at offset 4 (was 1, writing e001)
[ 62.167689] PM: Writing back config space on device 0000:00:06.0 at offset 3 (was 0, writing 2008)
[ 62.167697] PM: Writing back config space on device 0000:00:06.0 at offset 1 (was 2100000, writing 2100007)
[ 62.168487] eth0: setting full-duplex.
[ 62.524752] NET: Registered protocol family 10
[ 62.524951] lo: Disabled Privacy Extensions
[ 64.197618] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 64.239608] NET: Registered protocol family 17
[ 71.422301] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 71.541431] IPv6 over IPv4 tunneling driver
[ 71.544709] tun6to4: Disabled Privacy Extensions
[ 72.081060] Netfilter messages via NETLINK v0.30.
[ 72.100404] nf_conntrack version 0.5.0 (3967 buckets, 31736 max)
[ 72.811937] IPP2P v0.8.1_rc1 loading
[ 72.926345] eth0: no IPv6 routers present
[ 74.861402] eth1: no IPv6 routers present
[ 81.728485] u32 classifier
[ 81.728543] input device check on
[ 81.728594] Actions configured
[ 82.216199] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 92.897360] capifs: Rev 1.1.2.3
[ 92.973949] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
[ 95.045673] b1pci-e200: card 1 "B1" ready.
[ 95.045736] b1pci-e200: card 1 Protocol: DSS1
[ 95.045790] b1pci-e200: card 1 Linetype: point to multipoint
[ 95.045846] b1pci-e200: B1-card (3.10-02) now active
[ 95.045900] kcapi: card 1 "b1pci-e200" ready.
[ 95.047245] capidrv: controller 1 up
[ 95.048863] capidrv-1: now up (2 B channels)
[ 95.048917] capidrv-1: D2 trace enabled
[ 105.032231] input: Power Button (FF) as /class/input/input2
[ 105.032736] ACPI: Power Button (FF) [PWRF]
[ 105.048199] input: Power Button (CM) as /class/input/input3
[ 105.048680] ACPI: Power Button (CM) [PWRB]
[ 105.061429] input: Sleep Button (CM) as /class/input/input4
[ 105.061908] ACPI: Sleep Button (CM) [SLPB]
[ 121.931398] Installing knfsd (copyright (C) 1996 [email protected]).
[ 122.168403] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 122.168810] NFSD: starting 90-second grace period
[ 126.605649] sit: nexthop == NULL
[ 134.261793] Initializing XFRM netlink socket
[ 135.884545] sit: nexthop == NULL
[ 166.978850] sit: nexthop == NULL
[ 167.734423] sit: nexthop == NULL
[ 1302.877455] BUG: at mm/truncate.c:60 cancel_dirty_page()
[ 1302.877563] [<c0137371>] cancel_dirty_page+0x45/0x7b
[ 1302.877673] [<df944b18>] reiserfs_cut_from_item+0x7cc/0x7fd [reiserfs]
[ 1302.878000] [<c01e5eba>] __kfree_skb+0x9b/0xf7
[ 1302.878097] [<df9316a0>] make_cpu_key+0x3f/0x46 [reiserfs]
[ 1302.878217] [<df944efa>] reiserfs_do_truncate+0x3b1/0x515 [reiserfs]
[ 1302.878396] [<df949901>] journal_begin+0x3f/0xd0 [reiserfs]
[ 1302.878516] [<df9322fc>] reiserfs_truncate_file+0x1c1/0x2ad [reiserfs]
[ 1302.878662] [<df938172>] reiserfs_file_release+0x35f/0x379 [reiserfs]
[ 1302.878784] [<c013be42>] free_pgtables+0x70/0x7c
[ 1302.878900] [<c01491f1>] __fput+0xa5/0x14d
[ 1302.879004] [<c0146e7a>] filp_close+0x51/0x58
[ 1302.879106] [<c0147de8>] sys_close+0x55/0x8a
[ 1302.879203] [<c0102ab2>] sysenter_past_esp+0x5f/0x85
[ 1302.879324] =======================