Hi. I use MediaGX with kernel 2.6.19.
cirix.c try to find companion chip (CS5510 and CS5520) with
pci_devPresent().
However, cyrix.c cannot find a companion chip because a list of
pci_devices is not yet initialized when __cpuinit is called.
Therefore, Search functions such as the 2.4 kernel which pci_devices
list is needless is necessary.
How will it be good?
--
TAKADA <[email protected]>
Hi Takada-san,
It is obviously bad.
These part is added several years ago by my post.
A cyrix.c try to find chip because of chip hardware bug affected
to timer which has started early.
Now, these chips have already been obsolete.
There are 2 options. One is simply remove these functionality.
The other is to move it to compile time ifdef that is off by default.
For user who use in embbeded environment,
I wanna change it to ifdef.
Thank you for report!
Hiroshi
TAKADA wrote:
> Hi. I use MediaGX with kernel 2.6.19.
> cirix.c try to find companion chip (CS5510 and CS5520) with
> pci_devPresent().
> However, cyrix.c cannot find a companion chip because a list of
> pci_devices is not yet initialized when __cpuinit is called.
> Therefore, Search functions such as the 2.4 kernel which pci_devices
> list is needless is necessary.
>
> How will it be good?
>
> Now, these chips have already been obsolete.
> There are 2 options. One is simply remove these functionality.
> The other is to move it to compile time ifdef that is off by default.
Fortunately we have pci functions for early pci accesses. I will take a
look at this as I still have a CS5520 board.
On Mon, 08 Jan 2007 01:00:00 +0900
Hiroshi Miura <[email protected]> wrote:
> Hi Takada-san,
>
> It is obviously bad.
> These part is added several years ago by my post.
> A cyrix.c try to find chip because of chip hardware bug affected
> to timer which has started early.
>
> Now, these chips have already been obsolete.
> There are 2 options. One is simply remove these functionality.
> The other is to move it to compile time ifdef that is off by default.
>
> For user who use in embbeded environment,
> I wanna change it to ifdef.
>
> Thank you for report!
>
> Hiroshi
What do the you think of this as a solution ?
Signed-off-by: Alan Cox <[email protected]>
--- linux.vanilla-2.6.20-rc4/arch/i386/kernel/cpu/cyrix.c 2007-01-01 21:40:52.000000000 +0000
+++ linux-2.6.20-rc4/arch/i386/kernel/cpu/cyrix.c 2007-01-08 16:36:31.762654720 +0000
@@ -196,6 +196,7 @@
unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
char *buf = c->x86_model_id;
const char *p = NULL;
+ u16 vendor, device;
/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
@@ -257,7 +258,6 @@
break;
case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
-#ifdef CONFIG_PCI
/* It isn't really a PCI quirk directly, but the cure is the
same. The MediaGX has deep magic SMM stuff that handles the
SB emulation. It thows away the fifo on disable_dma() which
@@ -265,22 +265,26 @@
Bug2: VSA1 has a wrap bug so that using maximum sized DMA
causes bad things. According to NatSemi VSA2 has another
- bug to do with 'hlt'. I've not seen any boards using VSA2
- and X doesn't seem to support it either so who cares 8).
- VSA1 we work around however.
+ bug to do with 'hlt'.
*/
printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
isa_dma_bridge_buggy = 2;
-
+
+ /* We do this before the PCI layer is running. However we
+ are safe here as we know the bridge must be a Cyrix
+ companion and must be present */
+
+ pci_conf1_read(0, 0, PCI_DEVFN(0x12, 0), 0, 4, &vendor);
+ pci_conf1_read(0, 0, PCI_DEVFN(0x12, 0), 4, 4, &device);
/*
* The 5510/5520 companion chips have a funky PIT.
*/
- if (pci_dev_present(cyrix_55x0))
+ if (vendor == PCI_VENDOR_ID_CYRIX && (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
pit_latch_buggy = 1;
-#endif
- c->x86_cache_size=16; /* Yep 16K integrated cache thats it */
+
+ c->x86_cache_size=16; /* Yep 16K integrated cache thats it (12K in X) */
/* GXm supports extended cpuid levels 'ala' AMD */
if (c->cpuid_level == 2) {
Thanks for your reply.
Your patch dosen't work on 2.6.19.1.
pci_conf1_read() requires u32 pointer for a value of a register.
I replaced u16 to u32.
The vendor-ID and dvice ID that pci_conf1_read() got were:
vender: 0x00021078
device: 0x0280000f.
My result of lcpci -vn is follow:
00:12.0 0601: 1078:0002
Flags: bus master, medium devsel, latency 64
I/O ports at 3000 [size=128]
I/O ports at 4000 [size=32]
I/O ports at 5000 [size=16]
Memory at 40010000 (32-bit, non-prefetchable) [size=4K]
The low word in vender-id that pci_conf1_reqd() store to u32 is correct. But, device-id is wrong.
I attach modified patch. It just work on my machine.
BTW, This patch is assuming that the PCI slot number is 0x12, Is it by Cyrix's spec?
--- linux-2.6.19/arch/i386/kernel/cpu/cyrix.c.orig 2007-01-09 16:45:21.000000000 +0900
+++ linux-2.6.19/arch/i386/kernel/cpu/cyrix.c 2007-01-09 16:50:57.000000000 +0900
@@ -8,6 +8,7 @@
#include <asm/timer.h>
#include "cpu.h"
+#include "../../pci/pci.h"
/*
* Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
@@ -183,19 +184,12 @@ static void __cpuinit geode_configure(vo
}
-#ifdef CONFIG_PCI
-static struct pci_device_id __cpuinitdata cyrix_55x0[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510) },
- { PCI_DEVICE(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520) },
- { },
-};
-#endif
-
static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
{
unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
char *buf = c->x86_model_id;
const char *p = NULL;
+ u32 vendor, device;
/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
@@ -273,11 +267,16 @@ static void __cpuinit init_cyrix(struct
printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
isa_dma_bridge_buggy = 2;
+ /* We do this before the PCI layer is running. However we
+ are safe here as we know the bridge must be a Cyrix
+ companion and must be present */
+ pci_conf1_read(0, 0, PCI_DEVFN(0x12, 0), PCI_VENDOR_ID, 2, &vendor);
+ pci_conf1_read(0, 0, PCI_DEVFN(0x12, 0), PCI_DEVICE_ID, 2, &device);
/*
* The 5510/5520 companion chips have a funky PIT.
*/
- if (pci_dev_present(cyrix_55x0))
+ if (vendor == PCI_VENDOR_ID_CYRIX && (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
pit_latch_buggy = 1;
#endif
c->x86_cache_size=16; /* Yep 16K integrated cache thats it */
From: Alan <[email protected]>
Subject: Re: i386,2.6 cyrix.c cann't found companion chip
Date: Mon, 8 Jan 2007 17:06:54 +0000
> On Mon, 08 Jan 2007 01:00:00 +0900
> Hiroshi Miura <[email protected]> wrote:
>
> > Hi Takada-san,
> >
> > It is obviously bad.
> > These part is added several years ago by my post.
> > A cyrix.c try to find chip because of chip hardware bug affected
> > to timer which has started early.
> >
> > Now, these chips have already been obsolete.
> > There are 2 options. One is simply remove these functionality.
> > The other is to move it to compile time ifdef that is off by default.
> >
> > For user who use in embbeded environment,
> > I wanna change it to ifdef.
> >
> > Thank you for report!
> >
> > Hiroshi
>
> What do the you think of this as a solution ?
>
> Signed-off-by: Alan Cox <[email protected]>
>
> --- linux.vanilla-2.6.20-rc4/arch/i386/kernel/cpu/cyrix.c 2007-01-01 21:40:52.000000000 +0000
> +++ linux-2.6.20-rc4/arch/i386/kernel/cpu/cyrix.c 2007-01-08 16:36:31.762654720 +0000
> @@ -196,6 +196,7 @@
> unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
> char *buf = c->x86_model_id;
> const char *p = NULL;
> + u16 vendor, device;
>
> /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
> 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
> @@ -257,7 +258,6 @@
> break;
>
> case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
> -#ifdef CONFIG_PCI
> /* It isn't really a PCI quirk directly, but the cure is the
> same. The MediaGX has deep magic SMM stuff that handles the
> SB emulation. It thows away the fifo on disable_dma() which
> @@ -265,22 +265,26 @@
>
> Bug2: VSA1 has a wrap bug so that using maximum sized DMA
> causes bad things. According to NatSemi VSA2 has another
> - bug to do with 'hlt'. I've not seen any boards using VSA2
> - and X doesn't seem to support it either so who cares 8).
> - VSA1 we work around however.
> + bug to do with 'hlt'.
> */
>
> printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
> isa_dma_bridge_buggy = 2;
> -
> +
> + /* We do this before the PCI layer is running. However we
> + are safe here as we know the bridge must be a Cyrix
> + companion and must be present */
> +
> + pci_conf1_read(0, 0, PCI_DEVFN(0x12, 0), 0, 4, &vendor);
> + pci_conf1_read(0, 0, PCI_DEVFN(0x12, 0), 4, 4, &device);
>
> /*
> * The 5510/5520 companion chips have a funky PIT.
> */
> - if (pci_dev_present(cyrix_55x0))
> + if (vendor == PCI_VENDOR_ID_CYRIX && (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
> pit_latch_buggy = 1;
> -#endif
> - c->x86_cache_size=16; /* Yep 16K integrated cache thats it */
> +
> + c->x86_cache_size=16; /* Yep 16K integrated cache thats it (12K in X) */
>
> /* GXm supports extended cpuid levels 'ala' AMD */
> if (c->cpuid_level == 2) {
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
>
>