-stable review patch. If anyone has any objections, please let us know.
------------------
From: Erez Zilber <[email protected]>
iSER limits the number of outstanding PDUs to send. When this threshold is
reached, it should return an error code (-ENOBUFS) instead of setting the
suspend_tx bit (which should be used only by libiscsi). Without this fix,
during logout, open-iscsi over iSER tries to logout forever.
Signed-off-by: Erez Zilber <[email protected]>
Signed-off-by: Chris Wright <[email protected]>
---
drivers/infiniband/ulp/iser/iscsi_iser.c | 4 ++--
drivers/infiniband/ulp/iser/iser_initiator.c | 26 ++++++++++++--------------
2 files changed, 14 insertions(+), 16 deletions(-)
--- linux-2.6.19.2.orig/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ linux-2.6.19.2/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -177,7 +177,7 @@ iscsi_iser_mtask_xmit(struct iscsi_conn
* - if yes, the mtask is recycled at iscsi_complete_pdu
* - if no, the mtask is recycled at iser_snd_completion
*/
- if (error && error != -EAGAIN)
+ if (error && error != -ENOBUFS)
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
return error;
@@ -241,7 +241,7 @@ iscsi_iser_ctask_xmit(struct iscsi_conn
error = iscsi_iser_ctask_xmit_unsol_data(conn, ctask);
iscsi_iser_ctask_xmit_exit:
- if (error && error != -EAGAIN)
+ if (error && error != -ENOBUFS)
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
return error;
}
--- linux-2.6.19.2.orig/drivers/infiniband/ulp/iser/iser_initiator.c
+++ linux-2.6.19.2/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -304,18 +304,14 @@ int iser_conn_set_full_featured_mode(str
static int
iser_check_xmit(struct iscsi_conn *conn, void *task)
{
- int rc = 0;
struct iscsi_iser_conn *iser_conn = conn->dd_data;
- write_lock_bh(conn->recv_lock);
if (atomic_read(&iser_conn->ib_conn->post_send_buf_count) ==
ISER_QP_MAX_REQ_DTOS) {
- iser_dbg("%ld can't xmit task %p, suspending tx\n",jiffies,task);
- set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
- rc = -EAGAIN;
+ iser_dbg("%ld can't xmit task %p\n",jiffies,task);
+ return -ENOBUFS;
}
- write_unlock_bh(conn->recv_lock);
- return rc;
+ return 0;
}
@@ -340,7 +336,7 @@ int iser_send_command(struct iscsi_conn
return -EPERM;
}
if (iser_check_xmit(conn, ctask))
- return -EAGAIN;
+ return -ENOBUFS;
edtl = ntohl(hdr->data_length);
@@ -426,7 +422,7 @@ int iser_send_data_out(struct iscsi_conn
}
if (iser_check_xmit(conn, ctask))
- return -EAGAIN;
+ return -ENOBUFS;
itt = ntohl(hdr->itt);
data_seg_len = ntoh24(hdr->dlength);
@@ -500,7 +496,7 @@ int iser_send_control(struct iscsi_conn
}
if (iser_check_xmit(conn,mtask))
- return -EAGAIN;
+ return -ENOBUFS;
/* build the tx desc regd header and add it to the tx desc dto */
mdesc->type = ISCSI_TX_CONTROL;
@@ -609,6 +605,7 @@ void iser_snd_completion(struct iser_des
struct iscsi_iser_conn *iser_conn = ib_conn->iser_conn;
struct iscsi_conn *conn = iser_conn->iscsi_conn;
struct iscsi_mgmt_task *mtask;
+ int resume_tx = 0;
iser_dbg("Initiator, Data sent dto=0x%p\n", dto);
@@ -617,15 +614,16 @@ void iser_snd_completion(struct iser_des
if (tx_desc->type == ISCSI_TX_DATAOUT)
kmem_cache_free(ig.desc_cache, tx_desc);
+ if (atomic_read(&iser_conn->ib_conn->post_send_buf_count) ==
+ ISER_QP_MAX_REQ_DTOS)
+ resume_tx = 1;
+
atomic_dec(&ib_conn->post_send_buf_count);
- write_lock(conn->recv_lock);
- if (conn->suspend_tx) {
+ if (resume_tx) {
iser_dbg("%ld resuming tx\n",jiffies);
- clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
scsi_queue_work(conn->session->host, &conn->xmitwork);
}
- write_unlock(conn->recv_lock);
if (tx_desc->type == ISCSI_TX_CONTROL) {
/* this arithmetic is legal by libiscsi dd_data allocation */
--