As you are using ndiswrapper, you won't much if any help from the kernel developers.
ndiswrapper taints the kernel as it links closed-source drivers into kernel space.
I strongly advise you to post this question on the ndiswrapper mailing list.
Good luck.
-Alex
> Hi !
> I'm trying to use a dongle with ndiswrapper, but it fails because a
> problem of usb. Indeed, when I put on first the dongle, a lsusb give :
> Bus 001 Device 002: ID 0457:0163 Silicon Integrated Systems Corps.
> Bus 001 Device 001: ID 0000:0000
> But, 10 to 30 seconds later, the dongle is not recognize with an error -71.
> lsusb give :
> Bus 001 Device 001: ID 0000:0000
> How can I configure the kernel to have the good configuration ? I tried
> different ways, but it fails.
>
> Thanks for help,
> Thibaud.
I code, therefore I am
____________________________________________________________________________________
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/
Thanks. In effect, I already post this question in the ndiswrapper list.
So, they told me that was a problem of USB and of kernel. Then, I'm
looking for configuration of the kernel, because I compiled the 2.6.19,
but I no more success. Actually, lsusb recognize, then don't recognize
the machine a few seconds after. Ndiswrapper can be installed or not,
that change nothing.
This is the answer from which I was able to touch with you :
--- Thibaud Hulin <[email protected]> wrote:
> > So, 30 seconds later, the dongle is not recognize. lsusb give :
> > Bus 001 Device 001: ID 0000:0000
> > So, I can't use my dongle.
If 'lsusb' doesn't see the card, it may indicate problem with your USB host
(either hardware, or host driver or both). You may want to try different
kernels. Until that part works right, ndiswrapper won't be able to
initialize
the card.
Giri
Alex Davis a ?crit :
> As you are using ndiswrapper, you won't much if any help from the kernel developers.
> ndiswrapper taints the kernel as it links closed-source drivers into kernel space.
>
> I strongly advise you to post this question on the ndiswrapper mailing list.
>
> Good luck.
>
> -Alex
Am Samstag, 10. Februar 2007 17:59 schrieb Thibaud Hulin:
> Thanks. In effect, I already post this question in the ndiswrapper list.
> So, they told me that was a problem of USB and of kernel. Then, I'm
> looking for configuration of the kernel, because I compiled the 2.6.19,
> but I no more success. Actually, lsusb recognize, then don't recognize
> the machine a few seconds after. Ndiswrapper can be installed or not,
> that change nothing.
If you can replicate this without ndiswrapper having been loaded ever,
this is another matter. Post again to the usb list and provide
/var/log/messages.
Regards
Oliver