[ 0.000000] Linux version 2.6.20-mm1 (root@luna) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #3 SMP PREEMPT Fri Feb 16 17:31:24 MST 2007
[ 0.000000] Command line: root=/dev/sdc1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable)
[ 0.000000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 3FF80100, 0064 (r1 NEC 1000724 MSFT 97)
[ 0.000000] ACPI: FACP 3FF80290, 00F4 (r3 A_M_I_ OEMFACP 1000724 MSFT 97)
[ 0.000000] ACPI: DSDT 3FF80590, 9560 (r1 A0543 A0543000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 3FF8E000, 0040
[ 0.000000] ACPI: APIC 3FF80390, 0080 (r1 A_M_I_ OEMAPIC 1000724 MSFT 97)
[ 0.000000] ACPI: SLIC 3FF80410, 0176 (r1 NEC 1000724 MSFT 97)
[ 0.000000] ACPI: OEMB 3FF8E040, 0066 (r1 A_M_I_ AMI_OEM 1000724 MSFT 97)
[ 0.000000] ACPI: HPET 3FF89AF0, 0038 (r1 A_M_I_ OEMHPET 1000724 MSFT 97)
[ 0.000000] ACPI: MCFG 3FF89B30, 003C (r1 A_M_I_ OEMMCFG 1000724 MSFT 97)
[ 0.000000] ACPI: SSDT 3FF8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)
[ 0.000000] ACPI: SSDT 3FF8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 262016
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000
[ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000)
[ 0.000000] PERCPU: Allocating 32512 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 257358
[ 0.000000] Kernel command line: root=/dev/sdc1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 55.972492] time.c: Detected 2803.022 MHz processor.
[ 55.978185] Console: colour VGA+ 80x25
[ 56.330253] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 56.337651] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 56.344845] Checking aperture...
[ 56.355983] Memory: 1027632k/1048064k available (2321k kernel code, 19932k reserved, 1021k data, 208k init)
[ 56.446402] Calibrating delay using timer specific routine.. 5611.70 BogoMIPS (lpj=9348326)
[ 56.454868] Mount-cache hash table entries: 256
[ 56.459513] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 56.464298] CPU: L2 cache: 2048K
[ 56.467565] using mwait in idle threads.
[ 56.471522] CPU: Physical Processor ID: 0
[ 56.475566] CPU: Processor Core ID: 0
[ 56.479267] CPU0: Thermal monitoring enabled (TM2)
[ 56.484095] Freeing SMP alternatives: 24k freed
[ 56.488669] ACPI: Core revision 20070126
[ 56.529802] Using local APIC timer interrupts.
[ 56.569927] result 25026969
[ 56.572759] Detected 25.026 MHz APIC timer.
[ 56.579666] Booting processor 1/2 APIC 0x1
[ 56.594145] Initializing CPU#1
[ 56.676195] Calibrating delay using timer specific routine.. 5608.69 BogoMIPS (lpj=9343519)
[ 56.676199] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 56.676200] CPU: L2 cache: 2048K
[ 56.676202] CPU: Physical Processor ID: 0
[ 56.676203] CPU: Processor Core ID: 1
[ 56.676207] CPU1: Thermal monitoring enabled (TM2)
[ 56.676404] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 56.676497] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 56.742810] Brought up 2 CPUs
[ 56.796188] migration_cost=19
[ 56.799393] NET: Registered protocol family 16
[ 56.803923] ACPI: bus type pci registered
[ 56.807975] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
[ 56.814449] PCI: Not using MMCONFIG.
[ 56.818057] PCI: Using configuration type 1
[ 56.829959] ACPI: Interpreter enabled
[ 56.833661] ACPI: Using IOAPIC for interrupt routing
[ 56.844613] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 56.849803] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 56.856517] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 56.862252] 0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
[ 56.868386] 0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
[ 56.874509] 0000:00:1f.1: trying to change BAR2 from 0000 to 0170
[ 56.880634] 0000:00:1f.1: trying to change BAR3 from 0000 to 0374
[ 56.887146] PCI: Transparent bridge - 0000:00:1e.0
[ 56.893980] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 56.901658] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 56.909339] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 56.917018] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 56.924698] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 56.932380] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 56.940371] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 56.948054] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 56.960972] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 56.966670] pnp: PnP ACPI init
[ 56.971852] pnp: PnP ACPI: found 15 devices
[ 56.976162] SCSI subsystem initialized
[ 56.979997] PCI: Using ACPI for IRQ routing
[ 56.984216] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 56.992572] PCI-GART: No AMD northbridge found.
[ 56.997137] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 57.002222] hpet0: 3 64-bit timers, 14318180 Hz
[ 57.007808] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 57.014807] pnp: 00:07: ioport range 0x290-0x297 has been reserved
[ 57.021021] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 57.028016] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 57.035004] pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 57.041992] pnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 57.048984] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 57.055977] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 57.062967] pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 57.069963] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 57.076438] pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved
[ 57.082906] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 57.089721] pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[ 57.097048] PCI: Bridge: 0000:00:01.0
[ 57.100748] IO window: disabled.
[ 57.104188] MEM window: faa00000-feafffff
[ 57.108637] PREFETCH window: cff00000-efefffff
[ 57.113289] PCI: Bridge: 0000:00:1c.0
[ 57.116984] IO window: disabled.
[ 57.120424] MEM window: disabled.
[ 57.123948] PREFETCH window: cfe00000-cfefffff
[ 57.128600] PCI: Bridge: 0000:00:1e.0
[ 57.132293] IO window: b000-cfff
[ 57.135734] MEM window: fa800000-fa9fffff
[ 57.139951] PREFETCH window: 50000000-500fffff
[ 57.144608] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 57.152098] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 57.159603] NET: Registered protocol family 2
[ 57.195898] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 57.203148] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[ 57.211740] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 57.218992] TCP: Hash tables configured (established 131072 bind 65536)
[ 57.225633] TCP reno registered
[ 57.239915] audit: initializing netlink socket (disabled)
[ 57.245355] audit(1171647969.809:1): initialized
[ 57.250138] Loading Reiser4. See http://www.namesys.com for a description of Reiser4.
[ 57.257448] io scheduler noop registered
[ 57.261447] io scheduler anticipatory registered (default)
[ 57.289411] assign_interrupt_mode Found MSI capability
[ 57.294680] assign_interrupt_mode Found MSI capability
[ 57.300033] input: Power Button (FF) as /class/input/input0
[ 57.305633] ACPI: Power Button (FF) [PWRF]
[ 57.309828] input: Power Button (CM) as /class/input/input1
[ 57.315435] ACPI: Power Button (CM) [PWRB]
[ 57.319747] ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 00, should be F7 [20070126]
[ 57.329532] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node ffff810001fe8b30), AE_ALREADY_EXISTS
[ 57.341355] ACPI: Marking method _OSC as Serialized
[ 57.346385] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810001fe8b50), AE_ALREADY_EXISTS
[ 57.358207] ACPI: Marking method _PDC as Serialized
[ 57.363412] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 57.369755] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node ffff810001fe8a10), AE_ALREADY_EXISTS
[ 57.381577] ACPI: Marking method _OSC as Serialized
[ 57.386601] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810001fe8a30), AE_ALREADY_EXISTS
[ 57.398427] ACPI: Marking method _PDC as Serialized
[ 57.403635] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 57.411226] Real Time Clock Driver v1.12ac
[ 57.415481] intel_rng: FWH not detected
[ 57.419358] Linux agpgart interface v0.102 (c) Dave Jones
[ 57.424792] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 57.432747] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 57.439089] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 57.444795] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 57.451178] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 57.459232] ICH7: IDE controller at PCI slot 0000:00:1f.1
[ 57.464670] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
[ 57.472155] ICH7: chipset revision 1
[ 57.475764] ICH7: not 100% native mode: will probe irqs later
[ 57.481547] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[ 57.488909] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[ 58.200206] hda: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
[ 58.951133] hdb: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive
[ 59.009722] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 59.569511] hda: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 59.576470] Uniform CD-ROM driver Revision: 3.20
[ 59.619699] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 59.629309] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 59.846470] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 59.846471] <Adaptec 2940 Ultra2 SCSI adapter>
[ 59.846471] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 59.846472]
[ 59.867316] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
[ 60.126942] scsi 0:0:1:0: Direct-Access IBM-PCCO ST39102LC !# B219 PQ: 0 ANSI: 2
[ 60.135070] scsi0:A:1:0: Tagged Queuing enabled. Depth 8
[ 60.140554] target0:0:1: Beginning Domain Validation
[ 60.152060] target0:0:1: wide asynchronous
[ 60.160960] target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 60.172180] target0:0:1: Domain Validation skipping write tests
[ 60.178215] target0:0:1: Ending Domain Validation
[ 60.186023] scsi 0:0:2:0: Direct-Access SGI SEAGATE ST39102L 2702 PQ: 0 ANSI: 2
[ 60.194150] scsi0:A:2:0: Tagged Queuing enabled. Depth 8
[ 60.199633] target0:0:2: Beginning Domain Validation
[ 60.209983] target0:0:2: wide asynchronous
[ 60.218053] target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 60.228445] target0:0:2: Domain Validation skipping write tests
[ 60.234480] target0:0:2: Ending Domain Validation
[ 60.904175] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 60.912308] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 60.918907] ata1: SATA max UDMA/133 cmd 0xffffc2000002a900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
[ 60.929330] ata2: SATA max UDMA/133 cmd 0xffffc2000002a980 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
[ 60.939743] ata3: SATA max UDMA/133 cmd 0xffffc2000002aa00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
[ 60.950166] ata4: SATA max UDMA/133 cmd 0xffffc2000002aa80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 317
[ 60.960553] scsi1 : ahci
[ 61.436882] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 61.449378] ata1.00: ATA-6: WDC WD360GD-00FLA2, 31.08F31, max UDMA/133
[ 61.455940] ata1.00: 72303840 sectors, multi 16: LBA48
[ 61.468506] ata1.00: configured for UDMA/133
[ 61.472815] scsi2 : ahci
[ 61.956423] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 63.313888] SCSI device sda: 17774160 512-byte hdwr sectors (9100 MB)
[ 63.322346] sda: Write Protect is off
[ 63.327624] SCSI device sda: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 63.336862] SCSI device sda: 17774160 512-byte hdwr sectors (9100 MB)
[ 63.345301] sda: Write Protect is off
[ 63.350573] SCSI device sda: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 63.359052] sda: sda1 sda2
[ 63.368204] sd 0:0:1:0: Attached scsi disk sda
[ 63.372724] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 63.378877] SCSI device sdb: 17781520 512-byte hdwr sectors (9104 MB)
[ 63.388720] sdb: Write Protect is off
[ 63.396188] SCSI device sdb: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 63.405418] SCSI device sdb: 17781520 512-byte hdwr sectors (9104 MB)
[ 63.415261] sdb: Write Protect is off
[ 63.422729] SCSI device sdb: write cache: enabled, read cache: enabled, supports DPO and FUA
[ 63.431207] sdb: sdb1
[ 63.439369] sd 0:0:2:0: Attached scsi disk sdb
[ 63.443882] sd 0:0:2:0: Attached scsi generic sg1 type 0
[ 91.977919] ata2.00: qc timeout (cmd 0xec)
[ 91.982052] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
[ 99.961107] ata2: port is slow to respond, please be patient (Status 0x80)
[ 122.944722] ata2: port failed to respond (30 secs, Status 0x80)
[ 122.950671] ata2: COMRESET failed (device not ready)
[ 122.955668] ata2: hardreset failed, retrying in 5 secs
[ 128.809132] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 128.819349] ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
[ 128.825389] ata2.00: 640 sectors, multi 1: LBA
[ 128.833945] ata2.00: configured for UDMA/133
[ 128.838257] scsi3 : ahci
[ 129.321984] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 129.332897] ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
[ 129.338499] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 129.350042] ata3.00: configured for UDMA/133
[ 129.354345] scsi4 : ahci
[ 129.677153] ata4: SATA link down (SStatus 0 SControl 300)
[ 129.682627] scsi 1:0:0:0: Direct-Access ATA WDC WD360GD-00FL 31.0 PQ: 0 ANSI: 5
[ 129.690802] SCSI device sdc: 72303840 512-byte hdwr sectors (37020 MB)
[ 129.697364] sdc: Write Protect is off
[ 129.701069] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 129.710083] SCSI device sdc: 72303840 512-byte hdwr sectors (37020 MB)
[ 129.716645] sdc: Write Protect is off
[ 129.720363] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 129.729358] sdc: sdc1 sdc2
[ 129.739045] sd 1:0:0:0: Attached scsi disk sdc
[ 129.743567] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 129.748955] scsi 2:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
[ 129.757131] SCSI dev Adt6c0e 1sbse diwresctors (0 MB)
[ 129.762910] sdd: Write rbocdt is off
[ 129.766621] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 129.775717] SCSI device sdd: 640 512-byte hdwr sectors (0 MB)
[ 129.781507] sdd: Write Protect is off
[ 129.785210] SCSI device sdd:rIite cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 129.794290] sdd: unknown partition table
[ 129.798563] sd 2:0:0:0: Attached scsi disk sdd
[ 129.803079] sd 2:0:0:0: Atc2hed scsi generic sg3 type 0
[ 129.808467] scsi 3:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
[ 129.816646] SCSI device sde: 4881d6 :5-0byte hdwr sectors (250059 MB)
[ 129.823386] sde: Write Protect is off
[ 129.827093] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 129.836109] SCSI device sde: 8s397168 512-byte hdwr sectors (250059 MB)
[ 129.842841] sde: Write Protect is off
[ 129.846550] SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or UPA[o 129.855545] sde: sde1 sde2
[ 129.869263] sd 3:0:0:0: Attached scsi disk sde
[ 129.873780] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 129.879170] sil680: BA5_EN = 1 clock = 00
[ 129.883217] sil680: BA5_EN = 1 clock = 10
[ 129.887268] sil680: 133MHz clock.
[ 129.890627] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 129.898128] ata5: PATA max UDMA/133 cmd 0x000000000001cc00 ctl 0x000000000001c882 bmdma 0x000000000001c400 irq 21
[ 129.908445] ata6: PATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001c482 bmdma 0x000000000001c408 irq 21
[ 129.918751] scsi5 : pata_sil680
[ 130.131948] ata5.00: ATA-0: SAMSUNG WN316025A (1.6 GB), GF102, max MWDMA2
[ 130.138763] ata5.00: 3145968 sectors, multi 16: LBA
[ 130.165287] ata5.00: configured for MWDMA2
[ 130.169424] scsi6 : pata_sil680
[ 130.333105] ata6.00: ATA-5: MAXTOR 6L040J2, A93.0500, max UDMA/133
[ 130.339316] ata6.00: 78198750 sectors, multi 16: LBA
[ 130.353083] ata6.00: configured for UDMA/133
[ 130.357420] scsi 5:0:0:0: Direct-Access ATA SAMSUNG WN316025 GF10 PQ: 0 ANSI: 5
[ 130.365596] SCSI device sdf: 3145968 512-byte hdwr sectors (1611 MB)
[ 130.371984] sdf: Write Protect is off
[ 130.375689] SCSI device sdf: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 130.384789] SCSI device sdf: 3145968 512-byte hdwr sectors (1611 MB)
[ 130.391180] sdf: Write Protect is off
[ 130.394887] SCSI device sdf: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 130.403967] sdf: sdf1
[ 130.418184] sd 5:0:0:0: Attached scsi disk sdf
[ 130.422710] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 130.428093] scsi 6:0:0:0: Direct-Access ATA MAXTOR 6L040J2 A93. PQ: 0 ANSI: 5
[ 130.436271] SCSI device sdg: 78198750 512-byte hdwr sectors (40038 MB)
[ 130.442832] sdg: Write Protect is off
[ 130.446537] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 130.455551] SCSI device sdg: 78198750 512-byte hdwr sectors (40038 MB)
[ 130.462114] sdg: Write Protect is off
[ 130.465827] SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 130.474826] sdg: sdg1
[ 130.478944] sd 6:0:0:0: Attached scsi disk sdg
[ 130.483463] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 130.488864] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 130.495076] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 130.504388] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 130.509402] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 130.514558] mice: PS/2 mouse device common for all mice
[ 130.519845] async_tx: api initialized (async)
[ 130.524246] xor: automatically using best checksumming function: generic_sse
[ 130.547695] generic_sse: 10130.400 MB/sec
[ 130.552030] xor: using function: generic_sse (10130.400 MB/sec)
[ 130.557990] input: AT Translated Set 2 keyboard as /class/input/input2
[ 130.564612] EDAC MC: Ver: 2.0.1 Feb 16 2007
[ 130.568926] TCP cubic registered
[ 130.572190] Initializing XFRM netlink socket
[ 130.576612] NET: Registered protocol family 1
[ 130.581008] NET: Registered protocol family 17
[ 130.585483] NET: Registered protocol family 15
[ 130.590594] reiser4: sdc1: found disk format 4.0.0.
[ 130.595510] Time: tsc clocksource has been installed.
[ 131.821999] VFS: Mounted root (reiser4 filesystem) readonly.
[ 131.827711] Freeing unused kernel memory: 208k freed
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 133.701731] Floppy drive(s): fd0 is 1.44M
[ 133.722536] FDC 0 is a post-1991 82077
[ 133.806755] usbcore: registered new interface driver usbfs
[ 133.812378] usbcore: registered new interface driver hub
[ 133.817802] usbcore: registered new device driver usb
[ 133.955923] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
[ 133.966440] USB Universal Host Controller Interface driver v3.0
[ 133.972576] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 133.980195] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 133.985658] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 133.993204] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
[ 133.999117] usb usb1: new device found, idVendor=0000, idProduct=0000
[ 133.999119] 8139too Fast Ethernet driver 0.9.28
[ 134.010254] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 134.017226] usb usb1: Product: UHCI Host Controller
[ 134.022189] usb usb1: Manufacturer: Linux 2.6.20-mm1 uhci_hcd
[ 134.028029] usb usb1: SerialNumber: 0000:00:1d.0
[ 134.032854] usb usb1: configuration #1 chosen from 1 choice
[ 134.038536] hub 1-0:1.0: USB hub found
[ 134.042368] hub 1-0:1.0: 2 ports detected
[ 134.147950] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 134.155502] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 134.160838] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 134.168353] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
[ 134.174247] usb usb2: new device found, idVendor=0000, idProduct=0000
[ 134.180781] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 134.187747] usb usb2: Product: UHCI Host Controller
[ 134.192710] usb usb2: Manufacturer: Linux 2.6.20-mm1 uhci_hcd
[ 134.198535] usb usb2: SerialNumber: 0000:00:1d.1
[ 134.203263] usb usb2: configuration #1 chosen from 1 choice
[ 134.208931] hub 2-0:1.0: USB hub found
[ 134.212743] hub 2-0:1.0: 2 ports detected
[ 134.318294] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 134.325890] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 134.331213] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 134.338738] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 134.344592] usb usb3: new device found, idVendor=0000, idProduct=0000
[ 134.351126] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 134.358087] usb usb3: Product: UHCI Host Controller
[ 134.363047] usb usb3: Manufacturer: Linux 2.6.20-mm1 uhci_hcd
[ 134.368893] usb usb3: SerialNumber: 0000:00:1d.2
[ 134.373628] usb usb3: configuration #1 chosen from 1 choice
[ 134.379287] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 134.386312] hub 3-0:1.0: USB hub found
[ 134.390134] hub 3-0:1.0: 2 ports detected
[ 134.495629] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 134.503174] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 134.508512] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 134.516031] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
[ 134.521880] usb usb4: new device found, idVendor=0000, idProduct=0000
[ 134.528415] usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 134.535394] usb usb4: Product: UHCI Host Controller
[ 134.540369] usb usb4: Manufacturer: Linux 2.6.20-mm1 uhci_hcd
[ 134.546210] usb usb4: SerialNumber: 0000:00:1d.3
[ 134.550945] usb usb4: configuration #1 chosen from 1 choice
[ 134.556628] hub 4-0:1.0: USB hub found
[ 134.560450] hub 4-0:1.0: 2 ports detected
[ 134.575606] usb 1-1: new device found, idVendor=045e, idProduct=001e
[ 134.582050] usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
[ 134.588946] usb 1-1: Product: Microsoft IntelliMouse? Explorer
[ 134.594869] usb 1-1: Manufacturer: Microsoft
[ 134.599242] usb 1-1: configuration #1 chosen from 1 choice
[ 134.607594] hub 1-1:1.0: USB hub found
[ 134.619567] hub 1-1:1.0: config failed, can't read hub descriptor (err -22)
[ 134.686359] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 134.694516] eth0: RealTek RTL8139 at 0xffffc20000052800, 00:e0:4e:03:18:39, IRQ 23
[ 134.707974] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 134.716169] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 134.870281] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 135.036209] usb 1-2: new device found, idVendor=0d3d, idProduct=0001
[ 135.042680] usb 1-2: new device strings: Mfr=0, Product=2, SerialNumber=0
[ 135.049571] usb 1-2: Product: USBPS2
[ 135.053293] usb 1-2: configuration #1 chosen from 1 choice
[ 135.071200] hub 1-2:1.0: USB hub found
[ 135.083162] hub 1-2:1.0: config failed, can't read hub descriptor (err -22)
[ 135.096198] hub 1-2:1.1: USB hub found
[ 135.108140] hub 1-2:1.1: config failed, can't read hub descriptor (err -22)
[ 135.349926] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 135.517078] usb 2-1: new device found, idVendor=07af, idProduct=0006
[ 135.523529] usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
[ 135.530444] usb 2-1: Product: DPCM-USB
[ 135.534265] usb 2-1: Manufacturer: Microtech International, Inc
[ 135.540382] usb 2-1: configuration #1 chosen from 1 choice
[ 135.553073] hub 2-1:1.0: bad descriptor, ignoring hub
[ 135.558223] hub: probe of 2-1:1.0 failed with error -5
[ 135.571473] Initializing USB Mass Storage driver...
[ 135.795307] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 140.991272] usb 2-2: new device found, idVendor=03f0, idProduct=0102
[ 140.997727] usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3
[ 141.004609] usb 2-2: Product: HP PhotoSmart C5101A - S20
[ 141.009999] usb 2-2: Manufacturer: HEWLETT-PACKARD
[ 141.014882] usb 2-2: SerialNumber: C0157308
[ 141.019198] usb 2-2: configuration #1 chosen from 1 choice
[ 141.027266] hub 2-2:1.0: bad descriptor, ignoring hub
[ 141.032398] hub: probe of 2-2:1.0 failed with error -5
[ 141.263832] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 146.459973] usb 3-1: new device found, idVendor=03f0, idProduct=0401
[ 146.466436] usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
[ 146.473337] usb 3-1: Product: HP ScanJet 5200C
[ 146.477858] usb 3-1: Manufacturer: Hewlett-Packard
[ 146.482736] usb 3-1: SerialNumber: SG91U161Z2HT
[ 146.487409] usb 3-1: configuration #1 chosen from 1 choice
[ 146.495963] hub 3-1:1.0: bad descriptor, ignoring hub
[ 146.501143] hub: probe of 3-1:1.0 failed with error -5
[ 146.506492] usb-storage: probe of 1-1:1.0 failed with error -5
[ 146.732344] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 146.900032] usb 4-1: new device found, idVendor=05e3, idProduct=0606
[ 146.906491] usb 4-1: new device strings: Mfr=0, Product=1, SerialNumber=0
[ 146.913382] usb 4-1: Product: USB2.0 Hub
[ 146.917437] usb 4-1: configuration #1 chosen from 1 choice
[ 146.927032] hub 4-1:1.0: USB hub found
[ 146.933004] hub 4-1:1.0: 4 ports detected
[ 147.246728] usb 4-1.3: new full speed USB device using uhci_hcd and address 3
[ 147.387604] usb 4-1.3: new device found, idVendor=0bda, idProduct=8187
[ 147.394228] usb 4-1.3: new device strings: Mfr=1, Product=2, SerialNumber=3
[ 147.401295] usb 4-1.3: Product: RTL8187_Wireless
[ 147.405984] usb 4-1.3: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 147.412252] usb 4-1.3: SerialNumber: 0015AF09B434
[ 147.417098] usb 4-1.3: configuration #1 chosen from 1 choice
[ 147.428593] hub 4-1.3:1.0: bad descriptor, ignoring hub
[ 147.433956] hub: probe of 4-1.3:1.0 failed with error -5
[ 147.442576] usbcore: registered new interface driver hiddev
[ 147.448355] usb-storage: probe of 1-2:1.0 failed with error -5
[ 147.454328] usb-storage: probe of 1-2:1.1 failed with error -5
[ 147.460269] usb-storage: probe of 2-1:1.0 failed with error -5
[ 147.466324] usb-storage: probe of 2-2:1.0 failed with error -5
[ 147.466363] input: Microsoft Microsoft IntelliMouse? Explorer as /class/input/input3
[ 147.466386] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb-0000:00:1d.0-1
[ 147.489918] usb-storage: probe of 3-1:1.0 failed with error -5
[ 147.495871] usb-storage: probe of 4-1.3:1.0 failed with error -5
[ 147.501988] usbcore: registered new interface driver usb-storage
[ 147.502058] input: USBPS2 as /class/input/input4
[ 147.502078] input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.0-2
[ 147.519593] USB Mass Storage support registered.
[ 147.538372] input: USBPS2 as /class/input/input5
[ 147.543103] input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.0-2
[ 147.549772] usbcore: registered new interface driver usbhid
[ 147.555440] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
done.
Setting parameters of disc: (none).
Activating swap:swapon on /dev/sdc2
[ 148.226072] Adding 1959920k swap on /dev/sdc2. Priority:-1 extents:1 across:1959920k
.
Will now check root file system:fsck 1.40-WIP (14-Nov-2006)
[/sbin/fsck.reiser4 (1) -- /] fsck.reiser4 -a /dev/sdc1
fsck.reiser4 /dev/sdc1
.
Setting the system clock..
System Clock set. Local time: Fri Feb 16 17:47:43 MST 2007.
Cleaning up ifupdown....
Loading kernel module nvidia.
[ 149.135709] nvidia: module license 'NVIDIA' taints kernel.
[ 149.395553] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 149.403157] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006
Loading kernel module 8139too.
Loading kernel module i2c-i801.
Loading kernel module i2c-isa.
Loading kernel module eeprom.
Loading kernel module w83627ehf.
Loading kernel module snd-rtctimer.
Loading kernel module cdc-acm.
[ 149.525742] Unable to handle kernel NULL pointer dereference at 0000000000000008 RIP:
[ 149.531302] [<ffffffff8887eec3>] :cdc_acm:acm_probe+0x1dd/0x741
[ 149.539958] PGD 3d248067 PUD 3d23c067 PMD 0
[ 149.544431] Oops: 0000 [1] PREEMPT SMP
[ 149.548475] last sysfs file: /class/net/lo/operstate
[ 149.553510] CPU 0
[ 149.555618] Modules linked in: cdc_acm snd_rtctimer w83627ehf eeprom i2c_isa nvidia(P) usb_storage usbhid 8139cp snd_hda_intel snd_hda_codec snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd 8139too uhci_hcd mii soundcore snd_page_alloc i2c_i801 evdev usbcore i2c_core floppy
[ 149.587337] Pid: 1620, comm: modprobe Tainted: P 2.6.20-mm1 #3
[ 149.593785] RIP: 0010:[<ffffffff8887eec3>] [<ffffffff8887eec3>] :cdc_acm:acm_probe+0x1dd/0x741
[ 149.602650] RSP: 0018:ffff81003df29c98 EFLAGS: 00010246
[ 149.608045] RAX: ffff81003eb14800 RBX: ffff81003eb14820 RCX: ffff81003eb21008
[ 149.615278] RDX: ffff81003eb14800 RSI: 0000000000000000 RDI: 0000000000000000
[ 149.622507] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffff88880d80
[ 149.629730] R10: 0000000000000000 R11: ffffc2000019a7f8 R12: ffffffff88880d80
[ 149.636960] R13: ffff81003f555800 R14: 0000000000000000 R15: ffff81003eb14800
[ 149.644183] FS: 00002abc668716d0(0000) GS:ffffffff80544000(0000) knlGS:0000000000000000
[ 149.652393] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 149.658217] CR2: 0000000000000008 CR3: 000000003d25d000 CR4: 00000000000006e0
[ 149.665458] Process modprobe (pid: 1620, threadinfo ffff81003df28000, task ffff81003eeb0950)
[ 149.674014] Stack: ffff81003d21af20 ffff81003eb14800 ffff81003edf3418 ffff81003d21af20
[ 149.682317] 00000000fffffff4 ffff81003d4e3820 00ffffff804db922 0000000000000001
[ 149.689981] 0000001088880db0 ffff81003d21af20 ffffffff8801cbe5 ffff81003eb14820
[ 149.697455] Call Trace:
[ 149.700194] [<ffffffff8801cbe5>] :usbcore:usb_match_one_id+0x26/0x84
[ 149.706742] [<ffffffff8801d78e>] :usbcore:usb_probe_interface+0x7d/0xa5
[ 149.713544] [<ffffffff8039ac88>] driver_probe_device+0xf6/0x17f
[ 149.719654] [<ffffffff8039ad94>] __driver_attach+0x0/0x93
[ 149.725230] [<ffffffff8039adee>] __driver_attach+0x5a/0x93
[ 149.730893] [<ffffffff8039a14e>] bus_for_each_dev+0x43/0x6e
[ 149.736644] [<ffffffff8039a48e>] bus_add_driver+0x6b/0x18d
[ 149.742310] [<ffffffff8801d2b0>] :usbcore:usb_register_driver+0x85/0xeb
[ 149.749113] [<ffffffff880560cc>] :cdc_acm:acm_init+0xcc/0x105
[ 149.755037] [<ffffffff8028dd0b>] sys_init_module+0x1572/0x16d2
[ 149.761058] [<ffffffff802561ce>] system_call+0x7e/0x83
[ 149.766361]
[ 149.767898]
[ 149.767898] Code: 49 8b 46 08 80 78 05 0a 74 17 49 8b 47 08 80 78 05 0a 0f 85
[ 149.777661] RIP [<ffffffff8887eec3>] :cdc_acm:acm_probe+0x1dd/0x741
[ 149.784146] RSP <ffff81003df29c98>
[ 149.787694] CR2: 0000000000000008
/etc/rcS.d/S20module-init-tools: line 36: 1620 Killed modprobe $module $args
Loading kernel module uhci-hcd.
Loading device-mapper support.
Will now check all file systems.
fsck 1.40-WIP (14-Nov-2006)
Checking all file systems.
Done checking file systems.
A log is being saved in /var/log/fsck/checkfs if that location is writable.
Setting kernel variables...done.
Will now mount local filesystems:[ 149.933025] ReiserFS: sde1: found reiserfs format "3.6" with standard journal
[ 149.940270] ReiserFS: sde1: using ordered data mode
[ 149.952096] ReiserFS: sde1: journal params: device sde1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 149.967046] ReiserFS: sde1: checking transaction log (sde1)
[ 150.037062] ReiserFS: sde1: Using r5 hash to sort names
[ 150.090239] reiser4: sda1: found disk format 4.0.0.
[ 150.384581] logsave[1509]: segfault at 0000000000000000 rip 0000000000000000 rsp 00007fff8ed0f858 error 4
.
Will now activate swapfile swap:done.
Cleaning /tmp...done.
Cleaning /var/run...done.
Cleaning /var/lock...done.
Setting up networking....
Configuring network interfaces...[ 151.161091] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
done.
Starting portmap daemon....
Setting sensors limits: done.
Setting console screen modes and fonts.
Setting up ALSA...done.
Initializing random number generator...done.
Recovering nvi editor sessions...none found.
Setting up X server socket directory /tmp/.X11-unix....
Setting up ICE socket directory /tmp/.ICE-unix....
Recovering schroot sessions:.
INIT: Entering runlevel: 2
Starting system log daemon....
Starting kernel log daemon....
Loading ACPI modules:
Starting Advanced Configuration and Power Interface daemon: acpid.
Starting Common Unix Printing System: cupsd.
Starting system message bus: dbus.
Starting Hardware abstraction layer: hald.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting DirMngr: dirmngr.
Starting mouse interface server: gpm.
Starting disk temperature monitoring daemon: hddtemp:[ 159.061948] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 159.068493] ata2.00: (irq_stat 0x40000001)
[ 159.072676] ata2.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
[ 159.072677] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 159.096306] ata2.00: configured for UDMA/133
[ 159.100653] ata2: EH complete
[ 159.103721] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 159.110296] ata2.00: (irq_stat 0x40000001)
[ 159.114462] ata2.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 512 in
[ 159.114463] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 159.138409] ata2.00: configured for UDMA/133
[ 159.142760] ata2: EH complete
[ 159.145849] SCSI device sdd: 640 512-byte hdwr sectors (0 MB)
[ 159.151703] sdd: Write Protect is off
[ 159.155437] sdd: Mode Sense: 00 3a 00 00
[ 159.159465] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 159.168688] SCSI device sdd: 640 512-byte hdwr sectors (0 MB)
[ 159.174533] sdd: Write Protect is off
[ 159.178276] sdd: Mode Sense: 00 3a 00 00
[ 159.182284] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
/dev/sdc /dev/sde /dev/sdg..
Starting internet superserver: inetd.
Starting Postfix Mail Transport Agent: postfix.
Starting Samba daemons: nmbd smbd.
Starting sensor daemon: sensord.
Starting OpenBSD Secure Shell server: sshd.
Setting up X font server socket directory /tmp/.font-unix...done.
Starting X font server: xfs.
Starting NFS common utilities: statd.
Starting NTP server: ntpd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Starting MLDonkey: mlnet configuration file prevent mlnet to be started (use force-start).
Starting K Display Manager: kdm.
Running local boot scripts (/etc/rc.local).
Debian GNU/Linux 4.0 luna ttyS0
luna login: [ 164.079044] I2C adapter driver [NVIDIA i2c adapter 0 at 3:00.0] forgot to specify physical device
[ 164.088018] i2c-1: adapter [NVIDIA i2c adapter 0 at 3:00.0] registered
[ 164.094691] i2c-1: found normal entry for adapter 1, addr 0x50
[ 164.100653] i2c-1: found normal entry for adapter 1, addr 0x51
[ 164.106621] i2c-1: found normal entry for adapter 1, addr 0x52
[ 164.112606] i2c-1: found normal entry for adapter 1, addr 0x53
[ 164.118596] i2c-1: found normal entry for adapter 1, addr 0x54
[ 164.124560] i2c-1: found normal entry for adapter 1, addr 0x55
[ 164.130528] i2c-1: found normal entry for adapter 1, addr 0x56
[ 164.136504] i2c-1: found normal entry for adapter 1, addr 0x57
[ 164.142471] i2c-1: attach_adapter failed (-16) for driver [w83627ehf]
[ 164.149060] I2C adapter driver [NVIDIA i2c adapter 1 at 3:00.0] forgot to specify physical device
[ 164.158004] i2c-2: adapter [NVIDIA i2c adapter 1 at 3:00.0] registered
[ 164.164690] i2c-2: found normal entry for adapter 2, addr 0x50
[ 164.170665] i2c-2: found normal entry for adapter 2, addr 0x51
[ 164.176627] i2c-2: found normal entry for adapter 2, addr 0x52
[ 164.182606] i2c-2: found normal entry for adapter 2, addr 0x53
[ 164.188589] i2c-2: found normal entry for adapter 2, addr 0x54
[ 164.194556] i2c-2: found normal entry for adapter 2, addr 0x55
[ 164.200518] i2c-2: found normal entry for adapter 2, addr 0x56
[ 164.206494] i2c-2: found normal entry for adapter 2, addr 0x57
[ 164.212478] i2c-2: attach_adapter failed (-16) for driver [w83627ehf]
[ 164.219051] I2C adapter driver [NVIDIA i2c adapter 2 at 3:00.0] forgot to specify physical device
[ 164.228003] i2c-3: adapter [NVIDIA i2c adapter 2 at 3:00.0] registered
[ 164.234688] i2c-3: found normal entry for adapter 3, addr 0x50
[ 164.240661] i2c-3: found normal entry for adapter 3, addr 0x51
[ 164.246629] i2c-3: found normal entry for adapter 3, addr 0x52
[ 164.252612] i2c-3: found normal entry for adapter 3, addr 0x53
[ 164.258587] i2c-3: found normal entry for adapter 3, addr 0x54
[ 164.264560] i2c-3: found normal entry for adapter 3, addr 0x55
[ 164.270536] i2c-3: found normal entry for adapter 3, addr 0x56
[ 164.276510] i2c-3: found normal entry for adapter 3, addr 0x57
[ 164.282486] i2c-3: attach_adapter failed (-16) for driver [w83627ehf]
On Fri, Feb 16, 2007 at 06:17:54PM -0700, Berck E. Nash wrote:
> I get the following OOPS on boot, presumably connected with USB driver
> loading. I've attached the entire log. Please CC on replies as I'm not
> subscribed.
>
> Loading kernel module nvidia.
> [ 149.135709] nvidia: module license 'NVIDIA' taints kernel.
Hi,
Could you try booting without loading the nvidia module? Oopses related
to it have been reported for 2.6.20-mm1.
See http://lkml.org/lkml/2007/2/16/428
Regards,
Frederik